Pokhara is about 142 km from Kathmandu in a straight line. A pilot who takes off from Tribhuvan Airport and flies 142 km will not land in Pokhara unless she flies the right way: about 23° north of west. Fly 142 km due south and you are over India. The number alone is not enough; the direction is half the information.
Quantities like this, which need a direction as well as a size, are vectors. Forces, velocities, accelerations and displacements are all vectors, and most of physics is written in them. This unit teaches the language: how to draw vectors, add them, take them apart into pieces, and multiply them in the two ways nature uses.
2.1 Introduction
Think about these:
- Pokhara lies about 142 km from Kathmandu as the crow flies (about 200 km by road). Can a pilot land in Pokhara by flying 142 km in any direction from Kathmandu?
- A screw is turned clockwise. Which way does it move? And if it is turned anticlockwise?
- Your mother asks you to fetch something from a shop and tells you only “it’s 200 m from the main gate”. Can you find the shop?
In each case the size alone is not enough: you need a direction too. The pilot needs a heading; the screw goes in or comes out depending on which way it turns; and 200 m from the gate could be anywhere on a circle round it.
Physical quantities are of two kinds:
- A scalar has only a magnitude (a size: a number with its unit). Mass, length, time, temperature, distance, speed, work, energy, and the money in your pocket are scalars. A hundred-rupee note is worth a hundred rupees whichever way it points.
- A vector has a magnitude and a direction, and combines with other vectors by the rules of vector addition (the triangle law, Section 2.3). Displacement, velocity, acceleration, force and momentum are vectors.
That second condition matters. Electric current has a size and a direction along the wire, yet it is a scalar: when two currents meet at a junction, the current that leaves is simply their sum, whatever the angle between the wires. Currents don’t add by the triangle law, so current is not a vector.
Which of these is a vector?
Pick an answer to see why.
How a vector is shown
In a drawing, a vector is an arrow. Its length, to a chosen scale, is the vector’s magnitude, and the way it points is the vector’s direction. The arrow starts at its initial point (tail) and ends at its terminal point (head).
In writing, a vector is a letter with an arrow over it, , or in print a bold letter, A. Its magnitude is written , or simply A in plain italic. So “F = 20 N, east” is a vector, and F = 20 N is its magnitude.
A vector doesn’t have a fixed place: moving an arrow without turning it or changing its length gives the same vector. A walk of 3 km north is the same displacement from Bhaktapur or from Butwal.
2.2 Types of vectors
Unit vector
A unit vector has a magnitude of exactly 1; it carries only a direction. The unit vector along a vector is written or (“A hat”), and is divided by its own magnitude:
that is, any vector is its magnitude times a unit vector in its direction.
The three most useful unit vectors point along the axes: along X, along Y and along Z.
The position vector of a point P(x, y, z) is the arrow from the origin O to P:
Its magnitude comes from Pythagoras, twice (across the floor, then up):
so the unit vector along is
Parallel, equal and negative vectors
- Parallel vectors point the same way, whatever their magnitudes (a and b in a. below). Vectors pointing exactly opposite ways are antiparallel.
- Equal vectors have the same magnitude and the same direction. Two cars driving north at 60 km/h on different roads have equal velocities.
- The negative of a vector , written , has the same magnitude and the opposite direction.
Collinear, coplanar and null vectors
- Collinear vectors lie along the same line, or along parallel lines, pointing the same way or opposite ways. (So parallel and antiparallel vectors are collinear.)
- Coplanar vectors lie in the same plane. Any two vectors are coplanar; three need not be.
- A null (zero) vector, , has zero magnitude, and no particular direction. You get it by adding a vector to its negative: . The displacement of a runner who finishes a lap where she started is a null vector.
A runner runs once round a 400 m track and stops where she started. Her displacement is:
Pick an answer to see why.
2.3 Addition of vectors
Two forces on a body act together like one force, their resultant. Finding the single vector that has the same effect as several vectors together is called the composition (addition) of vectors. Since direction matters, 3 N + 4 N needn’t be 7 N: it is anything from 1 N to 7 N, depending on the angle between them. Three laws, all the same idea, do the adding.
2.3.1 Triangle law of vector addition
If two vectors are represented in magnitude and direction by two sides of a triangle taken in order, their resultant is represented by the third side, taken in the opposite order.
“In order” means head to tail: the second vector starts where the first ends. Walk 3 m east and then 4 m north, and you end up 5 m from where you started, along the third side. That third side, from the start of the first to the end of the second, is the resultant.
Let and , with θ the angle between the two vectors (between AB produced and BC, Figure 2.8). Then
Magnitude of R. Draw CD perpendicular to AB produced. In the right-angled triangle BDC:
In the right-angled triangle ADC, by Pythagoras:
Since :
Direction of R. Let α be the angle R makes with P. In triangle ADC:
2.3.2 Parallelogram law of vector addition
If two vectors acting at a point are represented in magnitude and direction by the two adjacent sides of a parallelogram drawn from that point, their resultant is represented by the diagonal of the parallelogram through that point.
This is the triangle law again: the side AC of the parallelogram is equal to OB (same length, same direction), so going along OA and then AC is going along P and then Q. It is the natural picture when two forces pull on one point, as two people pulling a cart with two ropes.
Proof. Let and be two adjacent sides of the parallelogram OACB, with θ the angle between them. The diagonal . Draw CD perpendicular to OA produced.
Since AC is parallel and equal to OB, AC = Q and ∠CAD = θ. In triangle ACD:
In triangle OCD, by Pythagoras:
and, if α is the angle between R and P,
the same results as the triangle law.
Special cases
- θ = 0° (same direction): cos 0° = 1, so , and , α = 0°. The resultant is the largest possible, along both.
- θ = 90° (at right angles): cos 90° = 0, so , and . (α is 45° only when P = Q.)
- θ = 180° (opposite directions): cos 180° = −1, so , the smallest possible, along the larger vector.
So whatever the angle, the resultant of P and Q lies between and . Two forces of 3 N and 4 N give anything from 1 N to 7 N.
Two equal vectors at 120°. With P = Q and cos 120° = −½,
The resultant is as large as either vector. And the other way round: if two equal vectors have a resultant equal to each, the angle between them is 120° (next example).
2.3.3 Polygon law of vector addition
If several vectors are represented in magnitude and direction by the sides of a polygon taken in order, their resultant is represented by the closing side of the polygon, taken in the opposite order (from the start of the first vector to the end of the last).
For four vectors drawn head to tail as (Figure 2.10), the resultant is the closing side : . It is the triangle law used again and again: add the first two, then add the third to their sum, and so on.
If the polygon closes by itself, so that the last vector ends where the first began, the resultant is the null vector: the forces balance. This is how an engineer checks that the forces on a bridge’s joint balance.
Three forces, of 3 N, 4 N and 5 N, act on a body that stays at rest. Their vectors, drawn head to tail, make:
Pick an answer to see why.
2.4 Subtraction of vectors
To subtract from , add the negative of :
Turn round (same length, opposite direction) to get , then add it to by the triangle law.
In the parallelogram on and , the two diagonals are and . Subtraction also gives the change in a vector: if a ball’s velocity changes from to , the change is , and it points along the push the ball was given.
A ball hits a wall at 5 m/s and bounces straight back at 5 m/s. The change in its velocity is:
Pick an answer to see why.
2.5 Resolution of a vector
Resolution is the reverse of addition: a single vector is split into two (or more) vectors, its components, which add up to it. A component is the part of the vector that acts along a chosen direction, its effect in that direction, like the shadow it casts on that line.
If a vector makes an angle α with the direction OA and β with the direction OB, its component along OA is , and along OB is . A component is the vector’s magnitude times the cosine of the angle between the vector and that direction.
2.5.1 Rectangular components of a vector
The most useful directions are two at right angles, along the X and Y axes. Then the two components together rebuild the vector exactly.
Let make an angle θ with the X-axis. Draw AM perpendicular to OX and AN perpendicular to OY. The x-component (horizontal component) is OM = , and the y-component (vertical component) is ON = MA = .
In the right-angled triangle OMA:
The vector is the sum of its components:
and the two components give back the vector’s magnitude and direction:
In space, a vector has three rectangular components, along X, Y and Z:
Components make adding easy, with no triangles at all: to add vectors, add their x-components and add their y-components separately.
A force of 20 N acts at 30° above the horizontal. Its horizontal and vertical components are:
Pick an answer to see why.
2.6 Scalar and vector products
Two vectors can be multiplied in two ways, and nature uses both.
The two products answer two different questions:
- The scalar product (dot product) asks: how much of one vector lies along the other? Its answer is a scalar. Work is the clearest example: only the part of a force along the motion does work.
- The vector product (cross product) asks: how much of one is at right angles to the other, and which way does the pair turn? Its answer is a vector, perpendicular to both. Torque, the turning effect of a force, is the clearest example: only the part of the force at right angles to the spanner turns the nut.
2.6.1 Scalar product
The scalar product (dot product) of two vectors and , read “A dot B”, is
where θ is the angle between them. It is a scalar. It is A times the component of B along A, or B times the component of A along B.
The work done by a force through a displacement is
Push a box along the floor with a force at 30° below the horizontal: only moves it along, and the work is .
Properties:
- If θ = 90°, . For non-zero vectors, a zero dot product means they are perpendicular (orthogonal): the property of orthogonality, the test for perpendicular vectors.
- If θ = 0°, , the largest; and .
- It is commutative: .
- It is distributive: .
- For the unit vectors along the axes, which are at right angles to one another:
So in components, the dot product is the sum of the products of matching components:
and the angle between two vectors is .
A 10 N force moves a box 2 m, at 60° to the direction of motion. The work done is:
Pick an answer to see why.
2.6.2 Vector product
The vector product (cross product) of and , read “A cross B”, is
where θ is the angle between them (0° to 180°) and is the unit vector perpendicular to the plane of and , in the direction given by the right-hand rule: curl the fingers of your right hand from towards (through the smaller angle), and your thumb points along . It is the way a screw moves when turned from to .
Examples in physics: the torque of a force, ; angular momentum, ; and the magnetic force on a moving charge, , which is why a charged particle in a magnetic field goes round in circles.
Properties:
- If θ = 0° or 180°, sin θ = 0, so . For non-zero vectors, a zero cross product means they are parallel (or antiparallel): the property of parallelism. In particular .
- If θ = 90°, , the largest.
- It is not commutative: turning from B to A is the opposite turn, so (it is anticommutative).
- It is distributive: .
- Its magnitude is the area of the parallelogram with sides and : the base is A and the height is .
- For the unit vectors along the axes (right-handed axes):
Going round the cycle i → j → k → i gives +; going backwards gives −.
In components, the cross product works out to
which is the determinant
is:
Pick an answer to see why.
Project work
Exercise
Choose the correct option
- Two vectors of equal magnitude act at an angle θ, and α is the angle their resultant makes with one of them. Then:
Pick an answer to see why.
- The cross product of two parallel vectors is:
Pick an answer to see why.
- Two forces of 4 N and 3 N act on a particle at the same time. The net force on it is:
Pick an answer to see why.
- A particle’s position is (3, 2, 5). Its position vector is:
Pick an answer to see why.
- The vector is:
The textbook prints the vector as 12î + 12ĵ (perhaps ½î + ½ĵ). Its magnitude is then (or 0.707), so it is none of the options: the book’s numbers don’t work. With for each number, it is a unit vector.
Pick an answer to see why.
- Which of these is a vector quantity?
Pick an answer to see why.
- In a hall 10 m × 12 m × 14 m, a fly flies straight from one corner to the opposite corner. How far does it fly?
Pick an answer to see why.
- A vector’s x- and y-components are equal. Its angle with the X-axis is:
Pick an answer to see why.
- Vectors , and have magnitudes 3, 4 and 12. The magnitude of is:
Pick an answer to see why.
- Two equal forces act at a point at 90° to each other. Their resultant is N. Each force is:
Pick an answer to see why.
- Two forces of 3 N and 2 N at an angle θ have a resultant R. When the first is increased to 6 N, the resultant becomes 2R. θ is:
Pick an answer to see why.
- The angle between and is:
Pick an answer to see why.
- A vector is . The length of its projection on the YZ plane is:
Pick an answer to see why.
- The vectors and are parallel. λ is:
The textbook gives the second vector as 2î + 2ĵ − λk̂, which is parallel only for λ = +2, not among its options (−1, −2, −3, −4): the book’s numbers don’t work. With +λk̂, they do.
Pick an answer to see why.
- and . The projection (component) of on is:
Pick an answer to see why.
- The angle made by with the X-axis is:
Pick an answer to see why.
- Three vectors satisfy and . Then is parallel to:
Pick an answer to see why.
- The largest possible magnitude of is:
Pick an answer to see why.
Answer these questions
- a.Define the negative of a vector. State the triangle law of vector addition.
- b.What is a component of a vector?
- c.Define a unit vector. Find the vector of magnitude 1 in the direction of .
Answer
- a.State the parallelogram law of vector addition.
- b.Find the angle between two vectors if the magnitude of their cross product equals their dot product.
- c.A position vector is . Find the angle it makes with the positive X-axis.
Answer
- a.Define the rectangular resolution of a vector.
- b.How do and differ?
- c.Find the unit vector along .
Answer
- a.Can be zero?
- b.Is a bird’s flight an example of the composition of vectors?
- c.A particle is displaced 2 m east, 3 m north and 4 m upward. Find the magnitude of its resultant displacement.
Answer
- a.Is a quantity with magnitude and direction necessarily a vector?
- b.State and explain the polygon law of vector addition.
- c.Show that the magnitude of is the area of a parallelogram.
Answer
- a.How is a vector shown in symbols and in a drawing?
- b.State and explain the polygon law of vector addition.
- c.Two equal vectors are inclined at 120°. Prove that their resultant is equal to either vector.
Answer
- a.In what two ways can two vectors be multiplied?
- b.State and explain the parallelogram law of vector addition. What happens to the resultant when the two vectors act at 180°?
- c.What is a unit vector? Explain how to resolve a vector into two rectangular components. Why is ? What are the conditions for two vectors to be perpendicular (orthogonal) and parallel?
Answer
- a.State the triangle law of vector addition.
- b.Derive expressions for the magnitude and direction of the resultant of two vectors inclined at an angle θ.
- c.Two vectors have magnitudes A + B and A − B. Find the angle between them if their resultant is .
Answer
Numerical problems
Vectors and have magnitudes 3 units and 4 units. What is the angle between them if their dot product is a. zero, b. 12 units, c. −12 units?
Answer
and .
- a.Find the magnitude of each vector.
- b.Write the vector difference using unit vectors.
- c.Find the magnitude and direction of .
Answer
A man pushes on the ground with a force of 100 N at 30° to the vertical. Find the components of the ground’s reaction along the vertical and the horizontal.
Answer
Three vectors satisfy , with magnitudes 3, 4 and 5 units. Find the angle between and .
Answer
A man who has lost his way drives 3.25 km north, then 4.75 km west, and finally 1.5 km south. Using components, find the magnitude and direction of his resultant displacement.
Answer
and . Find the area of the parallelogram they form.
Answer
A particle has a displacement of 8 m. One of its rectangular components is 4 m. What is the other?
Answer
A rocket fires two engines at once. One gives a thrust of 725 N straight forward, the other 513 N at 32.4° above the forward direction. Find the magnitude and direction (relative to forward) of the resultant force.
Answer
and .
- a.Write using unit vectors.
- b.Find the magnitude of each vector.
- c.Find the magnitude of . Is it the same as the magnitude of ? Explain.
Answer
A caver is surveying a cave. She follows a passage 180 m straight west, then 210 m in a direction 45° east of south, then 280 m at 30° east of north. After a fourth, unmeasured displacement she is back where she started. Find the magnitude and direction of the fourth displacement.
Answer
Printable PDFs
- The unit as a book (A5) 20 pages Answers as an A4 booklet, 5 sheets
- Study notes 2 pages
- Worksheet 5 pages Answer key
- Harder practice questions 2 pages Answer key
Quiz yourself: Force, Motion and Machines, Grades 5–12 →
Practice every question in the book, and keep track of the ones you miss →
A companion to your textbook, not a replacement for it: study from the book your school uses, and where the two differ, follow your teacher. Found a mistake? Please tell us.
