Skip to content

← Grade 11 Chemistry

Fundamental Principles of Organic Chemistry

Unit 13 · CDC textbook pages 569–609

Hide the stories, facts, photos, activities and interactives, for revising before an exam
In this unit 8 sections
  1. 13.1 IUPAC nomenclature of organic compounds
  2. 13.2 Qualitative analysis: detecting N, S and halogens by Lassaigne’s test
  3. 13.3 Same atoms, different compounds
  4. 13.4 Definition and classification of isomerism
  5. 13.5 Structural isomerism and its types
  6. 13.6 Geometrical and optical isomerism
  7. 13.7 Preliminary idea of reaction mechanism
  8. Exercise

More than a hundred million organic compounds have been recorded, and chemists make thousands of new ones every day. If each had a nickname, as the first ones did (wood spirit, oil of wintergreen, the acid of ants), nobody could keep up. So chemists agreed on one way of building a name from the structure itself: read the name, and you can draw the molecule; draw the molecule, and you can name it, in Kathmandu or in Kyoto.

This unit gives you that system, the IUPAC nomenclature, first for chains up to about six carbons, then for compounds with one functional group and with several. Then it asks the questions every chemist asks of an unknown compound. What elements are in it? Lassaigne’s test finds nitrogen, sulphur and the halogens. Can the same atoms make different compounds? They can, and the different ways they do it, the kinds of isomerism, explain why one form of a molecule smells of spearmint and its mirror image of caraway. Last comes a first look inside a reaction: how bonds break, which particles attack which, and how electrons are pushed and pulled along a molecule.

13.1 IUPAC nomenclature of organic compounds

Look at the name in Figure 13.1. It looks long, but every piece of it says something about the structure, and nothing is left for you to guess.

CH3CHOHCHCHCHCH3CH3123456substituent: prefix methylC=C: primary suffix -enefunctional group: secondary suffix -ol
Figure 13.1 5-Methylhex-3-en-2-ol. Read from the middle outwards: hex (six carbons in the main chain), -en- (a C=C, starting at carbon 3), -ol (an –OH group, on carbon 2), and in front 5-methyl (a CH₃ branch on carbon 5).

A name like this has up to four kinds of part:

  • the word root, which gives the number of carbons in the main chain (hex = 6);
  • the primary suffix, which says whether the carbon–carbon bonds are all single or include a double or triple bond (-ane, -ene, -yne);
  • the secondary suffix, which names the main functional group (-ol, -al, -oic acid…);
  • the prefix, which names the branches and the other groups on the chain (methyl, chloro, hydroxy…), with numbers called locants saying where they are.

prefix+word root+primary suffix+secondary suffix \text{prefix} + \text{word root} + \text{primary suffix} + \text{secondary suffix}

A name is written in that order: 5-methyl + hex + -3-ene + -2-ol. Where two pieces meet, a small change keeps it pronounceable: the final e of -ane or -ene is dropped before a suffix that starts with a vowel (hexenol, propanol, ethanal), but kept before a consonant (propanedial, ethanedioic acid).

Chemists needed such a system because the same compound used to have different names in different countries, and many compounds had no name at all. The first international agreement was made at a meeting in Geneva in 1892. The International Union of Pure and Applied Chemistry (IUPAC), founded in 1919, published its first full rules for organic names in 1957–58, and has revised them since; the latest edition was published in 2013. Names that follow these rules are called IUPAC names; the older names still heard in the laboratory and the market (acetone, acetic acid, chloroform) are common or trivial names.

a. Word root

The word root is the part of the name that gives the number of carbon atoms in the parent chain (the main chain). For a simple chain it is the longest chain of carbons; once a compound has a functional group, the parent chain is the longest chain that holds that group, as you will see below.

Carbons in the chain Word root Carbons in the chain Word root
1 meth 7 hept
2 eth 8 oct
3 prop 9 non
4 but 10 dec
5 pent 11 undec
6 hex 12 dodec

The first four roots are old names, from methanol, ether, propionic acid and butyric acid; from five carbons on they are Greek numbers (pente, five; hex, six), with nona from Latin.

b. Suffix

The word root is followed by the suffix, which may be primary, secondary or both.

i. Primary suffix

Look at the bonds between the carbon atoms in Figure 13.4, and in pentane, CH₃–CH₂–CH₂–CH₂–CH₃.

CH3CHCHCH3but-2-eneCH3CCHpropyne
Figure 13.4 But-2-ene has one C=C double bond; propyne has a C≡C triple bond. In pentane every carbon–carbon bond is single.
  • Pentane has only single bonds between its carbon atoms: it is saturated.
  • But-2-ene has one double bond between two carbon atoms: it is unsaturated.
  • Propyne has one triple bond between two carbon atoms: it is also unsaturated.

The primary suffix is written straight after the word root and tells which kind of carbon–carbon bond the chain has:

Carbon–carbon bonds Primary suffix Example
all single, C–C (saturated) -ane propane, CH₃–CH₂–CH₃
one double bond, C=C (unsaturated) -ene propene, CH₂=CH–CH₃
one triple bond, C≡C (unsaturated) -yne propyne, CH≡C–CH₃

ii. Secondary suffix

CCCOOHHHHHHfunctional group, –COOH
Figure 13.5 Propanoic acid. The shaded group of atoms, –COOH, decides how the compound behaves.

The shaded part of Figure 13.5 is the functional group, the group of atoms that gives a compound its chemical properties (Unit 12). The secondary suffix names it, and is written after the primary suffix:

Functional group Class of compound Secondary suffix
–OH alcohol -ol
–CHO aldehyde -al
>C=O (–CO– inside a chain) ketone -one
–COOH carboxylic acid -oic acid
–COO– (–COOR) ester -oate
–CONH₂ amide -amide
–CN nitrile -nitrile
–COX (X = Cl, Br, I) acyl halide -oyl halide
–CO–O–CO– acid anhydride -oic anhydride
–NH₂ amine -amine

In -al, -oic acid, -amide, -nitrile and -oyl halide the group’s own carbon is counted in the chain: propanal, CH₃CH₂CHO, has three carbons, not two.

Putting a name together

If the same acid carries a chlorine atom on its end carbon, Cl–CH₂–CH₂–COOH (Figure 13.6), the chlorine becomes a prefix, with the number of its carbon: 3-chloropropanoic acid. The chain is numbered from the carbon of –COOH, which is carbon 1.

ClCH2CH2COOH123
Figure 13.6 3-Chloropropanoic acid: the –COOH carbon is number 1, so the chlorine is on carbon 3.

More names, built the same way:

Compound Word root Primary suffix Secondary suffix IUPAC name
CH₃–CH₃ eth ane – ethane
CH₃–CH₂–CH₃ prop ane – propane
CH₃–CH₂–COOH prop ane oic acid propanoic acid
CH₃–CH₂–NH₂ eth ane amine ethanamine
CH₃–CH₂–OH eth ane ol ethanol
CH₃–(CH₂)₄–CHO hex ane al hexanal

What does the primary suffix in the name propyne tell you?

Pick an answer to see why.

c. Prefix

Where in a name do you write the chlorine of 2-chloropentane, compound A of the activity? In front, with its locant: 2-chloropentane.

A prefix names an atom or group of atoms joined to the parent chain that isn’t the main functional group. Such an atom or group is a substituent: it has taken the place (substituted) of a hydrogen atom of the chain. Alkyl branches are prefixes too: methyl, ethyl, propyl.

Substituent Prefix
–CH₃, –C₂H₅, –C₃H₇ methyl, ethyl, propyl (alkyl)
–X (–F, –Cl, –Br, –I) fluoro, chloro, bromo, iodo (halo)
–CN cyano
–OR alkoxy (–OCH₃ methoxy, –OC₂H₅ ethoxy)
–NO₂ nitro
–NH₂ amino
–N=N– azo

A. Rules for naming alkanes

1. Choose the parent chain

Which chain of the molecule in Figure 13.7 is the longest?

CH3CH2CHCH2CH2CH3CH2CH3the longest chain: six carbons, round a corner
Figure 13.7 The longest chain needn’t be straight on paper: here it turns into the branch drawn downwards. It has six carbons, so the compound is 3-ethylhexane, not a propylpentane.

Choose the longest continuous chain of carbon atoms as the parent chain (also called the principal or main chain). It need not be drawn in a straight line, but it must be continuous: you must be able to trace it from one end to the other without lifting your pencil and without going back. The carbons not in the parent chain are substituents (branches).

If two different chains are equally long, choose the one with more substituents on it (Figure 13.8 and Figure 13.9).

CH3CHCH3CHCH2CH3CH2CH2CH3right: six carbons, two branches
Figure 13.8 Two six-carbon chains run through this molecule. The shaded one carries two branches, a methyl and an ethyl…
CH3CHCH3CHCH2CH3CH2CH2CH3wrong: six carbons, one branch
Figure 13.9 …while this one, through the ethyl group, carries only one (an isopropyl group). So the first is the parent chain, and the compound is 3-ethyl-2-methylhexane.

2. Lowest locants

Number the carbons of the parent chain from the end nearer to a substituent. The number of the carbon a substituent is joined to is its locant, written in front of its name with a hyphen (Figure 13.10).

CH3CHCH3CH2CH2CH312345
Figure 13.10 Numbered from the end nearer the branch, the methyl group is on carbon 2: 2-methylpentane. Numbered from the other end it would be on carbon 4, which is wrong.

3. Several substituents: the first point of difference

When the chain has two or more substituents, number it from the end that gives the lower locant at the first point of difference. Write the locants of each numbering in order, and compare them one by one: the first place where they differ decides.

CH3CCH3CH3CHCH3CHCH3CH312345
Figure 13.11 2,2,3,4-Tetramethylpentane. From the left the locants are 2, 2, 3, 4; from the right, 2, 3, 4, 4. The first place where they differ is the second number, 2 against 3, so the left end wins.

Many books in Nepal call this the lowest sum rule: number so that the locants add up to the least. For Figure 13.11 the sums are 11 and 13, and the answer is the same; for most molecules you will meet, the two rules agree.

4. Alphabetical order

If the substituents sit at the same distances from both ends, give the lower number to the one that comes first in alphabetical order (Figure 13.12).

CH3CH2CHCH2CH3CHCH3CH2CH3123456
Figure 13.12 Ethyl and methyl are at carbons 3 and 4 from either end. Ethyl comes before methyl in the alphabet, so it gets 3: 3-ethyl-4-methylhexane.

The prefixes are also written in alphabetical order, whatever their locants: 3-ethyl-2-methylhexane, not 2-methyl-3-ethylhexane.

5. The same substituent more than once

If the same substituent comes two or more times, put di, tri, tetra, penta… in front of its name, and give every one of them its own locant, the numbers separated by commas: 2,2,3-trimethyl. A number is separated from a letter by a hyphen. The multiplying prefixes don’t count in alphabetical order: ethyl comes before dimethyl, because the d of di is ignored.

What are the names of the compounds in Figure 13.13 and Figure 13.14?

CH3CH2CHCH3CHCH2CH3CHCH3CH3123456
Figure 13.13 A hexane chain with two methyl groups and an ethyl group.
CH3CCH3CH3CHCH3CH2CH312345
Figure 13.14 A pentane chain with three methyl groups.

6. Cyclic hydrocarbons

What could the names of the two compounds in Figure 13.15 be?

cyclopropanecyclobutane
Figure 13.15 A ring of three carbons and a ring of four: each corner is a CH₂ group.

Saturated hydrocarbons whose carbons are joined in a ring are cycloalkanes, general formula CₙH₂ₙ. They are named by putting cyclo in front of the name of the alkane with the same number of carbons: the compounds in Figure 13.15 are cyclopropane and cyclobutane.

What is the IUPAC name of (CH₃)₂CH–CH₂–CH₃?

Pick an answer to see why.

B. Naming alkenes and alkynes

  1. Choose as the parent chain the longest continuous chain that contains both carbons of the double or triple bond. Use the suffix -ene for a double bond and -yne for a triple bond.
  2. Number the chain so that the multiple bond gets the lowest possible number. The number of its first carbon is written just before -ene or -yne: CH₂=CH–CH₂–CH₃ is but-1-ene.
  3. If the multiple bond is the same distance from both ends, number from the end that gives the substituents the lowest numbers.
  4. If the chain has two or more multiple bonds, number so that their locants are lowest at the first point of difference (the lowest sum rule of many books, as for substituents).
  5. If a double bond and a triple bond would get the same numbers from either end, the double bond gets the lower number.
  6. If the chain has both a double and a triple bond, the name ends in -yne: -en- comes first, -yne last (pent-1-en-4-yne, Figure 13.17).
  7. If there are two or more double (or triple) bonds, write -diene, -triene (-diyne, -triyne), each with its locant, and add an a to the word root before di, tri…, which begin with a consonant: buta-1,3-diene, penta-1,3-diene.
CH2CHCCH3CHCH312345
Figure 13.16 3-Methylpenta-1,3-diene: double bonds at carbons 1 and 3 (from the other end they would be 2 and 4), and a methyl on carbon 3.
CH2CHCH2CCH12345
Figure 13.17 Pent-1-en-4-yne: the double and triple bonds are equally far from the two ends (1 and 4 either way), so the double bond gets the lower number (rule 5). The name ends in -yne (rule 6).
CH2CCH2CH2CH3CH2CH2CH312345
Figure 13.18 2-Propylpent-1-ene: the parent chain is the longest chain holding both carbons of the C=C.

What is the IUPAC name of CH₃–CH=CH–CH₂–CH₃?

Pick an answer to see why.

C. Compounds with one functional group (monofunctional compounds)

For every class below, the rules are the same three:

  • the parent chain is the longest chain that contains the functional group (for –CHO, –COOH, –CN and the other groups ending in their own carbon, that carbon is part of the chain);
  • the chain is numbered so that the functional group gets the lowest number, and its locant goes just before the suffix (butan-2-ol); a group that can only be at the end of a chain (–CHO, –COOH) is always carbon 1, so its number isn’t written;
  • two or three of the same group are shown by di or tri with all their locants (propane-1,2,3-triol).

Alcohols

Functional group –OH (hydroxyl). General formula CₙH₂ₙ₊₁OH, written ROH. IUPAC name: alkane − e + ol = alkanol.

Compound Common name IUPAC name
CH₃OH methyl alcohol methanol
CH₃CH₂OH ethyl alcohol ethanol
CH₃CH₂CH₂OH propyl alcohol propan-1-ol
CH₃CH(OH)CH₃ isopropyl alcohol propan-2-ol
CH₃CH₂CH₂CH₂OH butyl alcohol butan-1-ol
CH₃CH(OH)CH₂CH₃ sec-butyl alcohol butan-2-ol

(Isobutyl alcohol is a different compound, (CH₃)₂CHCH₂OH, 2-methylpropan-1-ol.)

Aldehydes

Functional group –CHO (aldehyde group), always at the end of a chain. General formula CₙH₂ₙO, written RCHO. IUPAC name: alkane − e + al = alkanal. Two –CHO groups make a dial (propanedial, OHC–CH₂–CHO).

Compound Common name IUPAC name
HCHO formaldehyde methanal
CH₃CHO acetaldehyde ethanal
CH₃CH₂CHO propionaldehyde propanal
CH₃CH₂CH₂CHO butyraldehyde butanal
(CH₃)₂CHCHO isobutyraldehyde 2-methylpropanal

Ketones

Functional group >C=O inside a chain (–CO–), the carbonyl group. General formula CₙH₂ₙO, written RCOR′. IUPAC name: alkane − e + one = alkanone. Two or three such groups make a dione or trione.

Compound Common name IUPAC name
CH₃COCH₃ acetone (dimethyl ketone) propan-2-one (propanone)
CH₃COCH₂CH₃ ethyl methyl ketone butan-2-one (butanone)
CH₃CH₂COCH₂CH₃ diethyl ketone pentan-3-one

In propanone and butanone the C=O can only be on carbon 2, so the locant is often left out. A ketone’s common name lists the two alkyl groups on the C=O in alphabetical order, then the word ketone.

Carboxylic acids

Functional group –COOH (carboxyl group), always at the end of a chain. General formula CₙH₂ₙ₊₁COOH, written RCOOH. IUPAC name: alkane − e + oic acid = alkanoic acid. Two –COOH groups make a dioic acid; the e of the alkane stays, because d is a consonant.

Compound Common name IUPAC name
HCOOH formic acid methanoic acid
CH₃COOH acetic acid ethanoic acid
CH₃CH₂COOH propionic acid propanoic acid
CH₃CH₂CH₂COOH butyric acid butanoic acid
HOOC–COOH oxalic acid ethanedioic acid

Ethers

Functional group –O– between two carbon groups. General formula CₙH₂ₙ₊₂O, written ROR′. IUPAC name: alkoxyalkane. The larger alkyl group is the parent alkane; the smaller one, with the oxygen, is the alkoxy prefix (–OCH₃ methoxy, –OC₂H₅ ethoxy), with a locant when the parent has three or more carbons.

Compound Common name IUPAC name
CH₃–O–CH₃ dimethyl ether methoxymethane
CH₃–O–CH₂CH₃ ethyl methyl ether methoxyethane
CH₃CH₂–O–CH₂CH₃ diethyl ether ethoxyethane
CH₃–O–CH(CH₃)₂ isopropyl methyl ether 2-methoxypropane

Esters

Functional group –COO– (–COOR, the ester group). General formula CₙH₂ₙO₂, written RCOOR′. An ester is named like a salt of the acid: first the alkyl group R′ on the oxygen, as a separate word, then the acid’s name with -oic acid changed to -oate: alkyl alkanoate.

Compound Common name IUPAC name
HCOOCH₃ methyl formate methyl methanoate
CH₃COOCH₃ methyl acetate methyl ethanoate
CH₃COOCH₂CH₃ ethyl acetate ethyl ethanoate

Many fruit smells are esters: pentyl ethanoate smells of bananas, ethyl butanoate of pineapple. Ethyl ethanoate is the solvent in nail polish remover.

Amides

Functional group –CONH₂ (amide group), at the end of a chain. General formula CₙH₂ₙ₊₁CONH₂, written RCONH₂. IUPAC name: alkane − e + amide = alkanamide, the carbon of –CONH₂ counted in the chain.

Compound Common name IUPAC name
HCONH₂ formamide methanamide
CH₃CONH₂ acetamide ethanamide
CH₃CH₂CONH₂ propionamide propanamide

Acyl halides (acid halides)

Functional group –COX (X = Cl, Br, I). General formula RCOX. IUPAC name: alkane − e + oyl halide = alkanoyl halide.

Compound Common name IUPAC name
HCOCl formyl chloride methanoyl chloride
CH₃COCl acetyl chloride ethanoyl chloride
CH₃CH₂COCl propionyl chloride propanoyl chloride
C₆H₅COCl benzoyl chloride benzoyl chloride

Benzoyl chloride keeps its name: the acid it comes from, benzoic acid, is itself an IUPAC name.

Amines

Functional group –NH₂ (amino group). General formula R–NH₂ (or C₆H₅–NH₂, an aryl amine). IUPAC name: alkane − e + amine = alkanamine, with the number of the carbon that holds –NH₂ before -amine. Older books name them as amino-alkanes.

Compound Common name IUPAC name (older name)
CH₃–NH₂ methylamine methanamine (aminomethane)
CH₃–CH₂–NH₂ ethylamine ethanamine (aminoethane)
CH₃–CH₂–CH₂–NH₂ propylamine propan-1-amine (1-aminopropane)
CH₃–CH₂–CH₂–CH₂–NH₂ butylamine butan-1-amine (1-aminobutane)

Acid anhydrides

Functional group –CO–O–CO–, two acyl groups joined by an oxygen. General formula R–CO–O–CO–R. IUPAC name: alkanoic anhydride, the acid’s name with the word acid changed to anhydride.

Compound Common name IUPAC name
H–CO–O–CO–H formic anhydride methanoic anhydride
CH₃–CO–O–CO–CH₃ acetic anhydride ethanoic anhydride
CH₃CH₂–CO–O–CO–CH₂CH₃ propionic anhydride propanoic anhydride

What is the IUPAC name of CH₃–CH₂–CH₂–CHO?

Pick an answer to see why.

What is the IUPAC name of CH₃CH₂–O–CH₂CH₂CH₃?

Pick an answer to see why.

D. Compounds with two or more functional groups (polyfunctional compounds)

CH3COCHOHCHNH2COOH12345
Figure 13.19 A compound with four functional groups. Which can you find?

The compound in Figure 13.19 has four functional groups: a carboxylic acid (–COOH), an amino group (–NH₂), a hydroxyl group (–OH) and a ketone’s C=O. Only one of them can be the suffix. That one is the principal functional group; the others are named as prefixes, like substituents.

The principal group is the one highest in this order of seniority:

–COOH>–SO3H>–CO–O–CO–>–COOR>–COX>–CONH2>–CN>–CHO>>C=O>–OH>–NH2 \text{–COOH} > \text{–SO}_3\text{H} > \text{–CO–O–CO–} > \text{–COOR} > \text{–COX} > \text{–CONH}_2 > \text{–CN} > \text{–CHO} > \text{>C=O} > \text{–OH} > \text{–NH}_2

carboxylic acid > sulphonic acid > acid anhydride > ester > acyl halide > amide > nitrile > aldehyde > ketone > alcohol > amine.

The parent chain is then the longest chain that holds the principal group, numbered to give it the lowest number. Double and triple bonds aren’t on this list: they are always shown by -ene and -yne in the name, whatever the principal group is (but-3-en-2-ol). Halogens, nitro and alkoxy groups are never suffixes: they are always prefixes.

When a group is not the principal one, it gets a prefix name:

Group Prefix
–OH hydroxy
–NH₂ amino
–NHR alkylamino (methylamino…)
–NR₂ dialkylamino
–CHO formyl (oxo, when its carbon is part of the chain)
>C=O oxo (older name: keto)
–COOH carboxy
–COOR alkoxycarbonyl (methoxycarbonyl…)
–CN cyano
–CONH₂ carbamoyl (some books: carboxamido)
–SO₃H sulpho

All the prefixes, alkyl groups and halogens included, are written in alphabetical order before the name of the parent.

Three more:

CH3CHOHCHNH2COOH1234
Figure 13.20 2-Amino-3-hydroxybutanoic acid, the amino acid threonine, one of the nine your body can’t make. Amino comes before hydroxy in the alphabet, whatever their numbers.
CH3CHClCHOHCOOH1234
Figure 13.21 3-Chloro-2-hydroxybutanoic acid.
HOCH2CHOHCHO123
Figure 13.22 2,3-Dihydroxypropanal (glyceraldehyde): –CHO outranks –OH, so the name ends in -al.

E. From a name to a structure

The same functional group more than once

How do you name a compound with two or three of the same functional group, like those in Figure 13.27?

OCCOCOHHHHHHHHpropane-1,2,3-triolOCCOHHHHHHethane-1,2-diolOCCOCOHHHHHHHHpropane-1,2,3-triolOCCOHHHHHHethane-1,2-diol
Figure 13.27 Glycerol, with three –OH groups, and ethane-1,2-diol, with two.

Put di, tri, tetra… before the suffix and give every group its locant. The e of the alkane stays, because di and tri begin with a consonant: the first compound is propane-1,2,3-triol (glycerol) and the second ethane-1,2-diol (ethylene glycol, the antifreeze in car radiators).

Different functional groups

When different groups are on the chain, choose the principal group by the order of seniority, name the rest as prefixes in alphabetical order, and number the chain from the end that gives the principal group the lowest number.

CH3CHClCCH3OHCOOCH31234
Figure 13.28 An ester with a chlorine, a hydroxyl and a methyl group on its chain.

The ester group outranks –OH, so the compound in Figure 13.28 is named as a methyl ester of a butanoic acid, numbered from the ester’s C=O carbon. Its prefixes, in alphabetical order, are 3-chloro, 2-hydroxy and 2-methyl:

methyl 3-chloro-2-hydroxy-2-methylbutanoate

(the methyl on the oxygen is a separate word; the methyl on carbon 2 is a prefix).

Try it

Name it

H3CCH3
Branches
Longest chain
Ending
Number of the ending
Your name
…
Structure
1 of 39
Named at the first try
0 of 0

Choose a part from each row, then press Check. Start with the longest chain.

Press Check to see if the name is right.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

There are no branches on the parent chain: choose none.

Right: …. Two carbons (eth-) joined by a single bond (-ane).

It is ethane. Two carbons (eth-) joined by a single bond (-ane).

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

There are no branches on the parent chain: choose none.

Right: …. The chain turns a corner, but it is still one unbranched chain of five carbons: pentane. A drawing can bend; the molecule is the same.

It is pentane. The chain turns a corner, but it is still one unbranched chain of five carbons: pentane. A drawing can bend; the molecule is the same.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. The longest chain has three carbons (propane); a methyl group hangs on carbon 2, whichever end you count from.

It is 2-methylpropane. The longest chain has three carbons (propane); a methyl group hangs on carbon 2, whichever end you count from.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Four carbons in the longest chain (butane). Numbered from the left, the methyl is on carbon 2; from the right it would be 3, so the left end wins.

It is 2-methylbutane. Four carbons in the longest chain (butane). Numbered from the left, the methyl is on carbon 2; from the right it would be 3, so the left end wins.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. The longest chain turns the corner into the branch: four carbons, with a methyl on carbon 2. The same molecule as the one before, drawn another way (an ethyl on carbon 2 always makes a longer chain).

It is 2-methylbutane. The longest chain turns the corner into the branch: four carbons, with a methyl on carbon 2. The same molecule as the one before, drawn another way (an ethyl on carbon 2 always makes a longer chain).

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Every way you go, the longest chain has three carbons. Two methyls sit on carbon 2: 2,2-dimethyl, a number for each one and di- for two.

It is 2,2-dimethylpropane. Every way you go, the longest chain has three carbons. Two methyls sit on carbon 2: 2,2-dimethyl, a number for each one and di- for two.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Count from the right end, which is nearer the branch: the methyl is on carbon 2, not 4.

It is 2-methylpentane. Count from the right end, which is nearer the branch: the methyl is on carbon 2, not 4.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Five carbons in a row, with the methyl on the middle one: carbon 3 from either end.

It is 3-methylpentane. Five carbons in a row, with the methyl on the middle one: carbon 3 from either end.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Four carbons in the chain, two methyls on carbons 2 and 3: 2,3-dimethylbutane. Commas between numbers, a hyphen between a number and a word.

It is 2,3-dimethylbutane. Four carbons in the chain, two methyls on carbons 2 and 3: 2,3-dimethylbutane. Commas between numbers, a hyphen between a number and a word.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Every longest chain here has five carbons; the two carbons left over make an ethyl group (CH₂CH₃) on carbon 3.

It is 3-ethylpentane. Every longest chain here has five carbons; the two carbons left over make an ethyl group (CH₂CH₃) on carbon 3.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. From the left the branches are on carbons 2, 2 and 4; from the right on 2, 4 and 4. At the first difference, 2 beats 4, so the left end wins. This is “isooctane”, the standard behind a petrol’s octane number.

It is 2,2,4-trimethylpentane. From the left the branches are on carbons 2, 2 and 4; from the right on 2, 4 and 4. At the first difference, 2 beats 4, so the left end wins. This is “isooctane”, the standard behind a petrol’s octane number.

Count the longest chain of carbons again. It may turn a corner into a branch.

Only single bonds between the carbons and no oxygen: an alkane, which ends in -ane.

No number is needed here: choose none.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Six carbons in the longest chain. Numbered from the left the branches are on 2 and 4 (from the right, 3 and 5), and they are written in alphabetical order: ethyl before methyl.

It is 4-ethyl-2-methylhexane. Six carbons in the longest chain. Numbered from the left the branches are on 2 and 4 (from the right, 3 and 5), and they are written in alphabetical order: ethyl before methyl.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C=C double bond: an alkene, which ends in -ene.

No number is needed here: choose none.

There are no branches on the parent chain: choose none.

Right: …. Two carbons with a double bond between them: eth- + -ene. No number is needed: the double bond can only be there.

It is ethene. Two carbons with a double bond between them: eth- + -ene. No number is needed: the double bond can only be there.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C=C double bond: an alkene, which ends in -ene.

Number the chain from the end nearer the double bond, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Three carbons, a double bond between carbons 1 and 2. Counted from either end it starts at carbon 1, so the number can be left out: propene.

It is propene. Three carbons, a double bond between carbons 1 and 2. Counted from either end it starts at carbon 1, so the number can be left out: propene.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C=C double bond: an alkene, which ends in -ene.

Number the chain from the end nearer the double bond, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. The double bond is between carbons 2 and 3, and an alkene takes the smaller number: but-2-ene.

It is but-2-ene. The double bond is between carbons 2 and 3, and an alkene takes the smaller number: but-2-ene.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C=C double bond: an alkene, which ends in -ene.

Number the chain from the end nearer the double bond, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Number from the right end, nearer the double bond: it starts at carbon 1. “But-3-ene” is the same molecule counted from the wrong end.

It is but-1-ene. Number from the right end, nearer the double bond: it starts at carbon 1. “But-3-ene” is the same molecule counted from the wrong end.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C=C double bond: an alkene, which ends in -ene.

Number the chain from the end nearer the double bond, and give the number of the first carbon it is on.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. The chain is numbered from the double bond’s end: the double bond starts at carbon 1, and the methyl is on carbon 2.

It is 2-methylprop-1-ene. The chain is numbered from the double bond’s end: the double bond starts at carbon 1, and the methyl is on carbon 2.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C≡C triple bond: an alkyne, which ends in -yne.

No number is needed here: choose none.

There are no branches on the parent chain: choose none.

Right: …. Two carbons with a triple bond: ethyne, the acetylene of welding torches.

It is ethyne. Two carbons with a triple bond: ethyne, the acetylene of welding torches.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C≡C triple bond: an alkyne, which ends in -yne.

Number the chain from the end nearer the triple bond, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Three carbons and a triple bond, which can only start at carbon 1: propyne.

It is propyne. Three carbons and a triple bond, which can only start at carbon 1: propyne.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C≡C triple bond: an alkyne, which ends in -yne.

Number the chain from the end nearer the triple bond, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Four carbons, the triple bond at the end: but-1-yne. In but-2-yne the triple bond would be in the middle.

It is but-1-yne. Four carbons, the triple bond at the end: but-1-yne. In but-2-yne the triple bond would be in the middle.

Count the longest chain of carbons again. It may turn a corner into a branch.

There is a C≡C triple bond: an alkyne, which ends in -yne.

Number the chain from the end nearer the triple bond, and give the number of the first carbon it is on.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. The triple bond decides where counting starts: from the left it is at carbon 2 (from the right, 3). Counted that way, the methyl is on carbon 4, even though 2 would be smaller: the triple bond comes first.

It is 4-methylpent-2-yne. The triple bond decides where counting starts: from the left it is at carbon 2 (from the right, 3). Counted that way, the methyl is on carbon 4, even though 2 would be smaller: the triple bond comes first.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

An –OH on a carbon makes an alcohol, which ends in -ol.

No number is needed here: choose none.

There are no branches on the parent chain: choose none.

Right: …. One carbon (meth-) with an –OH (-ol): methan + ol = methanol.

It is methanol. One carbon (meth-) with an –OH (-ol): methan + ol = methanol.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

An –OH on a carbon makes an alcohol, which ends in -ol.

Number the chain from the end nearer the –OH, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Three carbons, numbered from the end with the –OH: it is on carbon 1.

It is propan-1-ol. Three carbons, numbered from the end with the –OH: it is on carbon 1.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

An –OH on a carbon makes an alcohol, which ends in -ol.

Number the chain from the end nearer the –OH, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. The –OH is on the middle carbon, carbon 2: propan-2-ol, the rubbing alcohol of swabs and sanitizers.

It is propan-2-ol. The –OH is on the middle carbon, carbon 2: propan-2-ol, the rubbing alcohol of swabs and sanitizers.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

An –OH on a carbon makes an alcohol, which ends in -ol.

Number the chain from the end nearer the –OH, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Number from the right, nearer the –OH: carbon 2, not 3.

It is butan-2-ol. Number from the right, nearer the –OH: carbon 2, not 3.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

An –OH on a carbon makes an alcohol, which ends in -ol.

Number the chain from the end nearer the –OH, and give the number of the first carbon it is on.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Three carbons in the chain that holds the –OH; the –OH and a methyl both sit on carbon 2.

It is 2-methylpropan-2-ol. Three carbons in the chain that holds the –OH; the –OH and a methyl both sit on carbon 2.

Count again: in an ether, the alkane is the longer side of the O. How many carbons does it have?

An O between two carbons makes an ether: it is named as an alkane (-ane) with an alkoxy branch.

No number is needed here: choose none.

The shorter side, with the O, is the branch: an alkoxy group (methoxy, ethoxy), with its carbon’s number if one is needed.

Right: …. An ether is named as an alkane with an alkoxy group on it: CH₃O– is methoxy, on methane. Its everyday name is dimethyl ether.

It is methoxymethane. An ether is named as an alkane with an alkoxy group on it: CH₃O– is methoxy, on methane. Its everyday name is dimethyl ether.

Count again: in an ether, the alkane is the longer side of the O. How many carbons does it have?

An O between two carbons makes an ether: it is named as an alkane (-ane) with an alkoxy branch.

No number is needed here: choose none.

The shorter side, with the O, is the branch: an alkoxy group (methoxy, ethoxy), with its carbon’s number if one is needed.

Right: …. The longer side, two carbons, is the alkane (ethane); the shorter side with the O is the alkoxy group (methoxy).

It is methoxyethane. The longer side, two carbons, is the alkane (ethane); the shorter side with the O is the alkoxy group (methoxy).

Count again: in an ether, the alkane is the longer side of the O. How many carbons does it have?

An O between two carbons makes an ether: it is named as an alkane (-ane) with an alkoxy branch.

No number is needed here: choose none.

The shorter side, with the O, is the branch: an alkoxy group (methoxy, ethoxy), with its carbon’s number if one is needed.

Right: …. Both sides have two carbons: ethoxy on ethane. This is the “ether” once used to put patients to sleep for surgery.

It is ethoxyethane. Both sides have two carbons: ethoxy on ethane. This is the “ether” once used to put patients to sleep for surgery.

Count again: in an ether, the alkane is the longer side of the O. How many carbons does it have?

An O between two carbons makes an ether: it is named as an alkane (-ane) with an alkoxy branch.

No number is needed here: choose none.

The shorter side, with the O, is the branch: an alkoxy group (methoxy, ethoxy), with its carbon’s number if one is needed.

Right: …. The alkane is propane, and the methoxy group (–OCH₃) is on its carbon 2.

It is 2-methoxypropane. The alkane is propane, and the methoxy group (–OCH₃) is on its carbon 2.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –CHO at the end of the chain makes an aldehyde, which ends in -al.

This ending takes no number: the group’s carbon is always carbon 1.

There are no branches on the parent chain: choose none.

Right: …. One carbon, and it is the aldehyde group’s carbon: methanal, formaldehyde.

It is methanal. One carbon, and it is the aldehyde group’s carbon: methanal, formaldehyde.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –CHO at the end of the chain makes an aldehyde, which ends in -al.

This ending takes no number: the group’s carbon is always carbon 1.

There are no branches on the parent chain: choose none.

Right: …. The –CHO carbon counts in the chain and is always carbon 1, so an aldehyde never needs a number for its group: three carbons, propanal.

It is propanal. The –CHO carbon counts in the chain and is always carbon 1, so an aldehyde never needs a number for its group: three carbons, propanal.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –CHO at the end of the chain makes an aldehyde, which ends in -al.

This ending takes no number: the group’s carbon is always carbon 1.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Counting starts at the –CHO carbon (1), so the methyl is on carbon 2.

It is 2-methylpropanal. Counting starts at the –CHO carbon (1), so the methyl is on carbon 2.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A C=O inside the chain makes a ketone, which ends in -one.

Number the chain from the end nearer the C=O, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. A C=O inside the chain is a ketone (-one). In three carbons it can only be on carbon 2, so the name is usually just propanone: acetone, in nail polish remover.

It is propanone. A C=O inside the chain is a ketone (-one). In three carbons it can only be on carbon 2, so the name is usually just propanone: acetone, in nail polish remover.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A C=O inside the chain makes a ketone, which ends in -one.

Number the chain from the end nearer the C=O, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Five carbons with the C=O on the middle one: pentan-3-one. Here the number is needed: pentan-2-one is a different ketone.

It is pentan-3-one. Five carbons with the C=O on the middle one: pentan-3-one. Here the number is needed: pentan-2-one is a different ketone.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A C=O inside the chain makes a ketone, which ends in -one.

Number the chain from the end nearer the C=O, and give the number of the first carbon it is on.

There are no branches on the parent chain: choose none.

Right: …. Number from the right, nearer the C=O: carbon 2. A ketone’s C=O can’t be at the end of a chain (that would be an aldehyde), so in four carbons it can only be at carbon 2: butanone or butan-2-one.

It is butanone. Number from the right, nearer the C=O: carbon 2. A ketone’s C=O can’t be at the end of a chain (that would be an aldehyde), so in four carbons it can only be at carbon 2: butanone or butan-2-one.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –COOH makes a carboxylic acid, which ends in -oic acid.

This ending takes no number: the group’s carbon is always carbon 1.

There are no branches on the parent chain: choose none.

Right: …. Two carbons, counting the –COOH carbon: ethanoic acid, the acid of vinegar.

It is ethanoic acid. Two carbons, counting the –COOH carbon: ethanoic acid, the acid of vinegar.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –COOH makes a carboxylic acid, which ends in -oic acid.

This ending takes no number: the group’s carbon is always carbon 1.

There are no branches on the parent chain: choose none.

Right: …. Written the other way round, HOOC– on the left, but it is the same: four carbons with the –COOH carbon as carbon 1. Butanoic acid gives rancid butter its smell.

It is butanoic acid. Written the other way round, HOOC– on the left, but it is the same: four carbons with the –COOH carbon as carbon 1. Butanoic acid gives rancid butter its smell.

Count again: the chain must hold the group’s carbon, and may turn a corner into a branch.

A –COOH makes a carboxylic acid, which ends in -oic acid.

This ending takes no number: the group’s carbon is always carbon 1.

Check the branches: name each one, give it its carbon’s number counted from the same end, and use di- for two of the same kind.

Right: …. Counting starts at the –COOH carbon; the methyl is on carbon 2.

It is 2-methylpropanoic acid. Counting starts at the –COOH carbon; the methyl is on carbon 2.

13.2 Qualitative analysis: detecting N, S and halogens by Lassaigne’s test

Qualitative analysis finds out which elements a compound contains (how much of each is quantitative analysis). Almost every organic compound contains carbon and hydrogen, and many contain oxygen. Less often they also contain nitrogen, sulphur or a halogen (X: chlorine, bromine or iodine), and a few contain phosphorus or a metal. These less common elements are called foreign elements or heteroelements; a compound may hold one of them or several.

The problem is that in an organic compound they are held by covalent bonds. The familiar tests of inorganic chemistry, silver nitrate for chloride or lead acetate for sulphide, are tests for ions in water, and a covalently bonded chlorine atom gives no chloride ion. Shake chloroform, CHCl₃, with silver nitrate solution, and nothing happens.

Lassaigne’s test, devised by the French chemist Jean Louis Lassaigne in 1843, solves this by heating the compound with sodium metal. Sodium is so reactive that it tears the foreign elements out of the molecule and turns them into ionic sodium salts that dissolve in water:

Na+C+N→fusionNaCN(sodium cyanide) \ce{Na + C + N ->[\text{fusion}] NaCN} \quad \text{(sodium cyanide)}
2 Na+S→fusionNaX2S(sodium sulphide) \ce{2Na + S ->[\text{fusion}] Na2S} \quad \text{(sodium sulphide)}
Na+X→fusionNaX(X = Cl, Br, I: sodium halide) \ce{Na + X ->[\text{fusion}] NaX} \quad \text{(X = Cl, Br, I: sodium halide)}

These equations show only what ends up where; they aren’t balanced reactions of a real molecule. Nitrogen is found as cyanide only because the compound also contains carbon, which every organic compound does.

Preparing the sodium extract

sodium +compoundignitiontube1. Heat red hotdistilledwaterchinadish2. Plunge into watermortarpestle3. Grind, then boilfilterpapersodiumextract4. Filter
Figure 13.29 Preparing the sodium extract: sodium and the compound are heated to red heat in an ignition tube, the hot tube is broken in distilled water, and the mixture is ground, boiled and filtered. The filtrate is the sodium extract.

a. Detecting nitrogen

The chemistry, step by step:

FeSOX4+2 NaOH→Fe(OH)X2↓+NaX2SOX4 \ce{FeSO4 + 2NaOH -> Fe(OH)2 v + Na2SO4}

(iron(II) hydroxide, a dirty green precipitate)

Fe(OH)X2+2 NaCN→Fe(CN)X2+2 NaOH \ce{Fe(OH)2 + 2NaCN -> Fe(CN)2 + 2NaOH}
Fe(CN)X2+4 NaCN→NaX4[Fe(CN)X6] \ce{Fe(CN)2 + 4NaCN -> Na4[Fe(CN)6]}

(sodium hexacyanoferrate(II), sodium ferrocyanide)

3 NaX4[Fe(CN)X6]+4 FeClX3→FeX4[Fe(CN)X6]X3↓+12 NaCl \ce{3Na4[Fe(CN)6] + 4FeCl3 -> Fe4[Fe(CN)6]3 v + 12NaCl}

(iron(III) hexacyanoferrate(II), ferric ferrocyanide: Prussian blue)

The concentrated hydrochloric acid dissolves the leftover iron hydroxides, whose dirty green color could otherwise be mistaken for a weak green result:

Fe(OH)X2+2 HCl→FeClX2+2 HX2O \ce{Fe(OH)2 + 2HCl -> FeCl2 + 2H2O}

Boiling with air also turns some of the iron(II) into iron(III), so a little Prussian blue forms even before iron(III) chloride is added.

A woodblock print of a huge curling blue wave with white foam fingers, about to break over three long boats of rowers, with Mount Fuji small in the distance
Figure 13.30 Hokusai’s The Great Wave off Kanagawa (about 1831), printed with Prussian blue. Photo: After Katsushika Hokusai, Public domain

b. Detecting sulphur

NaX2S+NaX2[Fe(CN)X5NO]→NaX4[Fe(CN)X5NOS] \ce{Na2S + Na2[Fe(CN)5NO] -> Na4[Fe(CN)5NOS]}

(sodium nitroprusside → sodium thionitroprusside, violet)

NaX2S+(CHX3COO)X2Pb→CHX3COOHPbS↓+2 CHX3COONa \ce{Na2S + (CH3COO)2Pb ->[CH3COOH] PbS v + 2CH3COONa}

(lead sulphide, a black precipitate)

Nitrogen and sulphur together

When a compound contains both nitrogen and sulphur and too little sodium is used, the two can end up together as sodium thiocyanate (sodium sulphocyanide), NaSCN. Then the nitrogen test gives a blood red color instead of Prussian blue, because thiocyanate ions with iron(III) give a red complex:

Na+C+N+S→fusionNaSCN \ce{Na + C + N + S ->[\text{fusion}] NaSCN}
3 NaSCN+FeClX3→Fe(SCN)X3+3 NaCl \ce{3NaSCN + FeCl3 -> Fe(SCN)3 + 3NaCl}

(iron(III) thiocyanate, blood red)

So a blood red color in the nitrogen test means both N and S are present. With plenty of sodium the thiocyanate is broken down, and the two elements then give their own tests:

NaSCN+2 Na→NaCN+NaX2S \ce{NaSCN + 2Na -> NaCN + Na2S}

c. Detecting halogens

AgNOX3+NaX→AgX↓+NaNOX3(general reaction) \ce{AgNO3 + NaX -> AgX v + NaNO3} \quad \text{(general reaction)}

For chlorine:

AgNOX3+NaCl→AgCl↓+NaNOX3 \ce{AgNO3 + NaCl -> AgCl v + NaNO3}
AgCl+2 NHX4OH→[Ag(NHX3)X2]Cl+2 HX2O \ce{AgCl + 2NH4OH -> [Ag(NH3)2]Cl + 2H2O}

(diamminesilver(I) chloride, colorless and soluble)

[Ag(NHX3)X2]Cl+2 HNOX3→AgCl↓+2 NHX4NOX3 \ce{[Ag(NH3)2]Cl + 2HNO3 -> AgCl v + 2NH4NO3}

For bromine and iodine:

AgNOX3+NaBr→AgBr↓+NaNOX3 \ce{AgNO3 + NaBr -> AgBr v + NaNO3}
AgNOX3+NaI→AgI↓+NaNOX3 \ce{AgNO3 + NaI -> AgI v + NaNO3}

Why boil with nitric acid first? If the compound also contains nitrogen or sulphur, the extract holds cyanide and sulphide ions, and these give precipitates with silver nitrate too, white silver cyanide and black silver sulphide. They would give a false result for halogen:

NaCN+AgNOX3→AgCN↓+NaNOX3(white) \ce{NaCN + AgNO3 -> AgCN v + NaNO3} \quad \text{(white)}
NaX2S+2 AgNOX3→AgX2S↓+2 NaNOX3(black) \ce{Na2S + 2AgNO3 -> Ag2S v + 2NaNO3} \quad \text{(black)}

Boiling with nitric acid drives them off as the gases hydrogen cyanide and hydrogen sulphide:

NaCN+HNOX3→HCN↑+NaNOX3 \ce{NaCN + HNO3 -> HCN ^ + NaNO3}
NaX2S+2 HNOX3→HX2S↑+2 NaNOX3 \ce{Na2S + 2HNO3 -> H2S ^ + 2NaNO3}

Both gases are poisonous (hydrogen cyanide very much so), which is why this boiling is done in a fume cupboard.

Try it

Find the foreign elements

NitrogenFeSO₄, FeCl₃Prussian blueSulphurnitroprussideclearSulphurlead acetateclearHalogenHNO₃, AgNO₃clear
Compound: Urea, (NH₂)₂CO
Sodium (matters when N and S are both present):
Foreign elements found
nitrogen

Only the nitrogen test turns: Prussian blue. Urea’s nitrogen became NaCN in the fusion.

A sodium extract gives a blood red color with iron(III) chloride in the nitrogen test. What does the compound contain?

Pick an answer to see why.

The sodium extract of a compound, boiled with nitric acid, gives a pale yellow precipitate with silver nitrate that hardly dissolves in dilute ammonia. Which element is present?

Pick an answer to see why.

13.3 Same atoms, different compounds

CCCCCHHHHHHHHHHHHpentaneCH3CCH3CH3CH32,2-dimethylpropane
Figure 13.31 Pentane and 2,2-dimethylpropane.

13.4 Definition and classification of isomerism

Two or more compounds that have the same molecular formula but different structures, and so different physical or chemical properties, are called isomers, and the existence of such compounds is called isomerism.

Isomerism is divided into two broad classes by the way the isomers differ (Figure 13.32):

  • Structural isomerism: the atoms are joined in a different order.
  • Stereoisomerism: the atoms are joined in the same order but arranged differently in space.
ChainPositionFunctionalMetamerismTautomerismGeometricalOpticalIsomerismStructuralatoms joined differentlyStereoisomerismdifferent in space
Figure 13.32 The kinds of isomerism in this unit.

13.5 Structural isomerism and its types

Compounds that have the same molecular formula but different structural formulas (their atoms joined in a different order) are called structural isomers, and the phenomenon structural isomerism. There are five kinds.

a. Chain isomerism

CH3CH2CH2CH3butaneCH3CHCH3CH32-methylpropane
Figure 13.33 Butane and 2-methylpropane, both C₄H₁₀.

Both compounds in Figure 13.33 are C₄H₁₀, but butane has a parent chain of four carbons and 2-methylpropane one of three, with a branch. Compounds with the same molecular formula but different carbon chains (straight or branched, or a different parent chain) are chain isomers, and the phenomenon is chain isomerism.

The number of possible chain isomers grows fast with the number of carbons: an alkane with 4 carbons has 2, with 5 carbons 3, with 6 carbons 5, with 7 carbons 9, with 10 carbons 75, and with 20 carbons 366,319.

Try it

Find every isomer

CH4
Formula
Add
Atoms
C 1 of 5
Isomers found
0 of 3
  • ?
  • ?
  • ?

Tap a + to bond a new atom to the skeleton; tap an end atom to take it away. Use all the atoms in the formula.

All the atoms are used: press Check.

Only an end atom (bonded to one other) can be taken away; take the atoms beyond it first.

New: butane. All four carbons in one unbranched chain. Move or take away atoms to make another.

That is butane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

butane: that makes all 2. C₄H₁₀ has exactly 2 structural isomers. Try another formula.

New: 2-methylpropane. A chain isomer of butane: three carbons in the longest chain, with a methyl branch. Move or take away atoms to make another.

That is 2-methylpropane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methylpropane: that makes all 2. C₄H₁₀ has exactly 2 structural isomers. Try another formula.

New: pentane. All five carbons in one unbranched chain. Move or take away atoms to make another.

That is pentane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

pentane: that makes all 3. C₅H₁₂ has exactly 3 structural isomers. Try another formula.

New: 2-methylbutane. A chain isomer of pentane: a four-carbon chain with one methyl branch. Move or take away atoms to make another.

That is 2-methylbutane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methylbutane: that makes all 3. C₅H₁₂ has exactly 3 structural isomers. Try another formula.

New: 2,2-dimethylpropane. A chain isomer of pentane: a three-carbon chain with two methyl branches on its middle carbon. Move or take away atoms to make another.

That is 2,2-dimethylpropane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2,2-dimethylpropane: that makes all 3. C₅H₁₂ has exactly 3 structural isomers. Try another formula.

New: hexane. All six carbons in one unbranched chain. Move or take away atoms to make another.

That is hexane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

hexane: that makes all 5. C₆H₁₄ has exactly 5 structural isomers. Try another formula.

New: 2-methylpentane. A five-carbon chain with a methyl on carbon 2. Move or take away atoms to make another.

That is 2-methylpentane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methylpentane: that makes all 5. C₆H₁₄ has exactly 5 structural isomers. Try another formula.

New: 3-methylpentane. A five-carbon chain with a methyl on carbon 3: the branch is in a different place from 2-methylpentane’s. Move or take away atoms to make another.

That is 3-methylpentane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

3-methylpentane: that makes all 5. C₆H₁₄ has exactly 5 structural isomers. Try another formula.

New: 2,2-dimethylbutane. A four-carbon chain with two methyls on carbon 2. Move or take away atoms to make another.

That is 2,2-dimethylbutane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2,2-dimethylbutane: that makes all 5. C₆H₁₄ has exactly 5 structural isomers. Try another formula.

New: 2,3-dimethylbutane. A four-carbon chain with methyls on carbons 2 and 3. Move or take away atoms to make another.

That is 2,3-dimethylbutane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2,3-dimethylbutane: that makes all 5. C₆H₁₄ has exactly 5 structural isomers. Try another formula.

New: butan-1-ol. An alcohol: the –OH on the end carbon of a four-carbon chain. Move or take away atoms to make another.

That is butan-1-ol again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

butan-1-ol: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: butan-2-ol. An alcohol, a position isomer of butan-1-ol: the –OH on carbon 2. Move or take away atoms to make another.

That is butan-2-ol again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

butan-2-ol: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: 2-methylpropan-1-ol. An alcohol, a chain isomer of butan-1-ol: a branched chain, the –OH on an end carbon. Move or take away atoms to make another.

That is 2-methylpropan-1-ol again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methylpropan-1-ol: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: 2-methylpropan-2-ol. An alcohol: the –OH on the middle carbon of a branched chain. Move or take away atoms to make another.

That is 2-methylpropan-2-ol again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methylpropan-2-ol: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: 1-methoxypropane. An ether, a functional isomer of the alcohols: the O between two carbons. Move or take away atoms to make another.

That is 1-methoxypropane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

1-methoxypropane: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: 2-methoxypropane. An ether: a methoxy group on the middle carbon of propane. Move or take away atoms to make another.

That is 2-methoxypropane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

2-methoxypropane: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

New: ethoxyethane. An ether with two carbons on each side of the O. Move or take away atoms to make another.

That is ethoxyethane again, drawn another way: the atoms are joined in the same order, so it is the same compound, not a new isomer.

ethoxyethane: that makes all 7. C₄H₁₀O has exactly 7 structural isomers: four alcohols and three ethers. Try another formula.

b. Position isomerism

What is the difference between the two compounds in Figure 13.36?

ClCH2CH2CH2CH31-chlorobutaneCH3CHClCH2CH32-chlorobutane
Figure 13.36 1-Chlorobutane and 2-chlorobutane, both C₄H₉Cl.

Both are C₄H₉Cl, with the same chain of four carbons, but the chlorine is on carbon 1 in one and on carbon 2 in the other. Compounds with the same molecular formula and the same carbon chain but a different position of a functional group, substituent or multiple bond are position isomers, and the phenomenon is position isomerism. Propan-1-amine and propan-2-amine (Figure 13.37) are another pair, and so are but-1-ene and but-2-ene.

NH2CH2CH2CH3propan-1-amineCH3CHNH2CH3propan-2-amine
Figure 13.37 Propan-1-amine and propan-2-amine, both C₃H₉N: the amino group is in a different place.

c. Functional isomerism

CCOHHHHHHethanolCOCHHHHHHmethoxymethane
Figure 13.38 Ethanol and methoxymethane, both C₂H₆O.

Compounds with the same molecular formula but different functional groups are functional isomers, and the phenomenon is functional isomerism. Since the functional group decides how a compound behaves, functional isomers differ very much in both physical and chemical properties: ethanol is a liquid that boils at 78 °C and mixes with water, because its molecules hydrogen-bond; methoxymethane is a gas that boils at −24 °C.

Common pairs of functional isomers:

  • a.alcohols and ethers, CₙH₂ₙ₊₂O: ethanol and methoxymethane;
  • b.aldehydes and ketones, CₙH₂ₙO: propanal and propan-2-one (Figure 13.39);
  • c.carboxylic acids and esters, CₙH₂ₙO₂: propanoic acid and methyl ethanoate (Figure 13.40).
CH3CCH3Opropan-2-oneCH3CH2CHOpropanal
Figure 13.39 Propan-2-one, a ketone, and propanal, an aldehyde: both C₃H₆O.
CH3CH2COOHpropanoic acidCH3COOCH3methyl ethanoate
Figure 13.40 Propanoic acid and methyl ethanoate, an ester: both C₃H₆O₂.

d. Metamerism

Look at the pairs in the table, and compare compound 1 with compound 2 of each.

Molecular formula Compound 1 Compound 2
C₄H₁₀O CH₃–O–CH₂–CH₂–CH₃, 1-methoxypropane CH₃–CH₂–O–CH₂–CH₃, ethoxyethane
C₅H₁₀O CH₃–CO–CH₂–CH₂–CH₃, pentan-2-one CH₃–CH₂–CO–CH₂–CH₃, pentan-3-one
C₄H₁₁N CH₃CH₂–NH–CH₂CH₃, N-ethylethanamine CH₃CH₂CH₂–NH–CH₃, N-methylpropan-1-amine

In each pair the functional group is the same (an ether’s –O–, a ketone’s C=O, a secondary amine’s –NH–), and it sits between two carbon groups; what differs is how the carbons are shared out on its two sides. Compounds like these, with the same molecular formula and the same functional group but different alkyl groups on either side of it, are metamers, and the phenomenon is metamerism. It happens only in classes whose functional group joins two carbon groups: ethers, ketones, secondary amines and esters.

CH3OCH2CH2CH31-methoxypropaneCH3CH2OCH2CH3ethoxyethaneCH3OCH2CH2CH31-methoxypropaneCH3CH2OCH2CH3ethoxyethane
Figure 13.41 Metamers of C₄H₁₀O: one carbon and three on the two sides of the oxygen, or two and two.
CH3COCH2CH2CH3pentan-2-oneCH3CH2COCH2CH3pentan-3-oneCH3COCH2CH2CH3pentan-2-oneCH3CH2COCH2CH3pentan-3-one
Figure 13.42 Pentan-2-one and pentan-3-one, metamers (and, by the position of the C=O, position isomers too).
NHN-ethylethanamineNHN-methylpropan-1-amine
Figure 13.43 N-Ethylethanamine and N-methylpropan-1-amine, metamers of C₄H₁₁N. The N- in a name means “on the nitrogen”.

e. Tautomerism

CCCOHHHHHHketo formCCCOHHHHHHenol form
Figure 13.44 Propan-2-one (the keto form) and prop-1-en-2-ol (the enol form). What functional group does each have, and what has moved?

In Figure 13.44, the keto form is a ketone (C=O); the enol form has a C=C and an –OH on the same carbon (en + ol, hence enol). One hydrogen atom has moved from a carbon to the oxygen, and a double bond has moved with it. Such a hydrogen, one that can move easily from one atom to another in the molecule, is called a labile hydrogen.

Tautomerism is a special kind of functional isomerism in which two isomers are turned into each other by the movement of a hydrogen atom (and a double bond) within the molecule, and exist together in dynamic equilibrium. The two forms are tautomers, and the reversible arrows (⇌) show that both are present. This pair is keto–enol tautomerism.

The two forms aren’t present equally: for most simple aldehydes and ketones the keto form wins by far. Propanone at room temperature is more than 99.99 % keto. Ethanal and its enol form ethenol (Figure 13.45) are another such pair.

CH3CHOethanal (keto)CH2CHOHethenol (enol)
Figure 13.45 Ethanal and ethenol, its enol form.

An amide has a tautomer too (Figure 13.46): an amino enol, with an –NH₂ and an –OH on the same carbon of a C=C, is in equilibrium with the amide, almost entirely on the amide’s side.

CH2CNH2OH1-aminoethen-1-ol (amino enol)CH3CNH2Oethanamide
Figure 13.46 1-Aminoethen-1-ol, an amino enol, and ethanamide.

CH₃CH₂CH₂OH and CH₃CH(OH)CH₃ are:

Pick an answer to see why.

Which pair are metamers?

Pick an answer to see why.

Stereoisomerism

CHOCHOCH2OHH(S)-L-glyceraldehydemirrorOHCCOHCH2OHH(R)-D-glyceraldehyde
Figure 13.47 Two forms of glyceraldehyde (2,3-dihydroxypropanal): the same atoms joined in the same order. What is the difference?

The two molecules in Figure 13.47 have the same atoms joined in the same order: each has a central carbon holding H, OH, CHO and CH₂OH. But the groups point in different directions in space (a wedge comes towards you, a dashed wedge goes away from you), and however you turn one, it won’t lie exactly on the other: each is the mirror image of the other.

Isomers that have the same molecular formula and the same structure (the same atoms joined in the same order) but a different arrangement of their atoms in space are called stereoisomers, and the phenomenon is stereoisomerism. They differ in configuration, the fixed arrangement round a particular atom or bond, which can’t be changed without breaking bonds. There are two kinds: geometrical isomerism and optical isomerism (Section 13.6).

13.6 Geometrical and optical isomerism

Geometrical isomerism

BrCCBrHHcis-1,2-dibromoetheneBrCCBrHHtrans-1,2-dibromoethene
Figure 13.48 The two 1,2-dibromoethenes.

Look at the two compounds in Figure 13.48.

  • a.What is the molecular formula of each?
  • b.What is the difference between the two structures?
  • c.Would you expect them to have the same physical properties?

Both are C₂H₂Br₂, with the same atoms joined in the same order: each carbon of the C=C holds one H and one Br. The difference is in space. Atoms joined by a single bond can turn freely about it, like two wheels on an axle, so CH₂Br–CH₂Br has no fixed shape. But a double bond can’t turn: its π bond, the second bond, is made by p orbitals overlapping above and below the plane of the molecule, and turning one carbon would break that overlap (Unit 5). So the groups on a C=C stay where they are.

In cis-1,2-dibromoethene the two Br atoms are on the same side of the double bond (Latin cis, on this side); in trans-1,2-dibromoethene they are on opposite sides (trans, across). They are different compounds with different physical properties, and some different chemical properties (they react at different rates, for example). The cis form is polar, because the pulls of its two C–Br bonds add up, and boils at 112.5 °C; in the trans form the two pulls cancel, and it boils at 108 °C.

Stereoisomers that differ in the arrangement of groups about a double bond (or a ring) are geometrical isomers (cis–trans isomers), and the phenomenon is geometrical isomerism. A compound shows it when:

  • a.it has a C=C double bond (or a ring), about which the carbons can’t rotate; and
  • b.each of the two carbons of the double bond holds two different atoms or groups.
H3CCCCH3HHcis-but-2-eneH3CCCCH3HHtrans-but-2-ene
Figure 13.49 cis-But-2-ene (boils at 4 °C) and trans-but-2-ene (boils at 1 °C).
CCCHHHHHHpropeneCCCCCHHHHHHHHHH2-methylbut-2-ene
Figure 13.50 Propene and 2-methylbut-2-ene have no cis and trans forms: one carbon of the C=C holds two identical groups (two H, or two CH₃), so swapping them gives the same molecule.

E and Z

Cis and trans work when each carbon of the C=C has an H and one other group. For a molecule like 3-methylpent-2-ene (Figure 13.52), where one carbon holds two groups that aren’t H, “the same side” is unclear: the same side as which group? Chemists then use the E–Z system:

  1. On each carbon of the double bond, give the two groups a priority by the atomic number of the atom joined to that carbon: the higher atomic number has the higher priority (Br > Cl > O > N > C > H).
  2. If the two atoms are the same, compare the atoms joined to them, one step further out, and so on (–CH₂CH₃ beats –CH₃, because its carbon holds C, H, H against H, H, H).
  3. If the two higher-priority groups are on the same side, the isomer is Z (German zusammen, together); if on opposite sides, it is E (entgegen, opposite).
H3CCCCH3CH2CH3H(Z)-3-methylpent-2-eneH3CCCCH3CH2CH3H(E)-3-methylpent-2-ene
Figure 13.52 The two isomers of 3-methylpent-2-ene. On carbon 2, CH₃ beats H; on carbon 3, CH₂CH₃ beats CH₃.

In (Z)-3-methylpent-2-ene the CH₃ of carbon 2 and the ethyl group of carbon 3 are on the same side; in the E isomer they are on opposite sides. Cis usually matches Z, but not always. In 2-chlorobut-2-ene, CH₃–CCl=CH–CH₃, the isomer with its two CH₃ groups on the same side (cis by the chain) is E: on carbon 2 the chlorine outranks the CH₃, and the chlorine and carbon 3’s CH₃ are on opposite sides.

Optical isomerism

CH3CHOCOOHH(S)-lactic acidmirrorCH3COHHOOCH(R)-lactic acid
Figure 13.53 The two forms of lactic acid (2-hydroxypropanoic acid). Can you turn one so that it fits exactly on the other?

If a carbon atom is bonded to four different atoms or groups, the molecule can exist in two forms that are mirror images of each other and can’t be laid exactly on each other (they are non-superimposable), however they are turned (Figure 13.53). Your two hands are like this: mirror images, but a left glove won’t fit a right hand. Such molecules are called chiral (from the Greek cheir, hand), and a carbon with four different groups is a chiral carbon (or asymmetric carbon), often marked with an asterisk, C*. In lactic acid the chiral carbon holds H, OH, CH₃ and COOH.

The two mirror-image forms have the same melting point, boiling point and solubility, and react the same way with ordinary reagents. They differ in one property: the way they turn plane-polarized light.

Plane-polarized light

Light is an electromagnetic wave whose electric field vibrates at right angles to the direction the light travels. In ordinary light from a lamp or the Sun, the vibrations are in all directions round the ray: it is unpolarized. A polaroid sheet (or a Nicol prism) lets through only the vibrations in one plane, and the light that comes out, vibrating in one plane only, is plane-polarized light (Figure 13.54).

unpolarizedpolarizedchain moleculestransmission axis
Figure 13.54 A polaroid sheet turns unpolarized light, vibrating in every direction across the ray, into plane-polarized light, vibrating in one plane only.

When plane-polarized light passes through a solution of a chiral compound, its plane of vibration is turned through an angle. The compound is said to be optically active. An instrument called a polarimeter measures the angle.

  • A compound that turns the plane clockwise (to the right, as seen by an observer looking towards the light) is dextrorotatory, written (+) or d-.
  • A compound that turns it anticlockwise (to the left) is levorotatory, written (−) or l-.

The two mirror-image forms of a chiral compound turn the light by the same angle in opposite directions: one is (+), the other (−). Isomers that differ in this way are optical isomers, and the phenomenon is optical isomerism. A compound with no chiral carbon (an achiral compound) is the same as its mirror image and is optically inactive.

A mixture of equal amounts of the (+) and (−) forms turns the light by + and − equally, so it is optically inactive. Such a mixture is a racemic mixture, written (±). The lactic acid your muscles make during hard exercise is the (+) form; the lactic acid in sour milk and dahi is often a mixture of both forms, depending on the bacteria; and lactic acid made in the laboratory from achiral starting materials is racemic.

Enantiomers

Two stereoisomers that are mirror images of each other but not superimposable are called enantiomers (Greek enantios, opposite). The two lactic acids are a pair of enantiomers, and so are the two glyceraldehydes and the two bromochlorofluoromethanes in Figure 13.55.

FCClBrH(R)mirrorFCClBrH(S)
Figure 13.55 The simplest chiral molecule: bromochlorofluoromethane, CHBrClF, and its mirror image.
CH3CHClBrchiralCH3CH2Brachiral
Figure 13.56 Which carbons are chiral? 1-Bromo-1-chloroethane and bromoethane.
CH3CH2CH2CHCH3CH2CH3chiralCH3CHOHCH3achiralCH3CH2CH2CHCH3CH2CH3chiralCH3CHOHCH3achiral
Figure 13.57 3-Methylhexane and propan-2-ol.

To decide if a carbon is chiral, list its four groups and look for two that are the same. In Figure 13.56 the shaded carbon of 1-bromo-1-chloroethane holds H, CH₃, Cl and Br, all different: chiral. Bromoethane’s CH₂ carbon holds two H: not chiral. In Figure 13.57 carbon 3 of 3-methylhexane holds H, methyl, ethyl and propyl, four different groups, so it is chiral even though they are all made of C and H. Propan-2-ol’s middle carbon holds two CH₃ groups: not chiral.

Tartaric acid: more than one chiral carbon

COOHOHHOCOOHHH(2R,3R)mirrorCOOHHOOHCOOHHH(2S,3S)
Figure 13.58 (2R,3R)- and (2S,3S)-tartaric acid in Fischer projections: the horizontal bonds come towards you and the vertical bonds go away. Each is the mirror image of the other.
COOHOHOHCOOHHHmeso-tartaric acid
Figure 13.59 meso-Tartaric acid: a mirror plane runs across its middle, so it is optically inactive.

Which of these compounds is optically active?

Pick an answer to see why.

A compound shows geometrical isomerism if:

Pick an answer to see why.

13.7 Preliminary idea of reaction mechanism

Most organic reactions can be written in a general form:

substrate+reagent→conditions[intermediate]⟶products \text{substrate} + \text{reagent} \xrightarrow{\text{conditions}} [\text{intermediate}] \longrightarrow \text{products}

The substrate is the organic compound that is changed. The reagent is the chemical that attacks it, under the right conditions (heat, light, a catalyst, a solvent). Often a short-lived, highly reactive intermediate forms first, and goes on to give the stable products. The step-by-step path the reactants take to become the products, which bonds break and form, and in what order, is the reaction mechanism. Knowing it lets a chemist predict what a new reaction will give.

13.7.1 Homolytic and heterolytic fission

A covalent bond is a shared pair of electrons. When it breaks (bond fission), the two electrons can be shared out in two ways (Figure 13.60).

Heterolytic fissionABA++B−both electrons go to B, the more electronegative atomHomolytic fissionABA+Bone electron goes to each atomtwo ionstwo free radicals
Figure 13.60 The two ways to break a bond A–B. In homolytic fission each atom keeps one electron of the pair (half-headed arrows, one electron each). In heterolytic fission the more electronegative atom, here B, takes both (a full arrow, a pair).

Curly arrows show where electrons go. A half-headed arrow (a fish-hook) moves one electron; a full arrow moves a pair. Each starts where the electrons are, at a bond or a lone pair, and ends where they go.

a. Homolytic fission

In homolytic fission (Greek homos, same) the bond breaks evenly: each atom takes one of the two bonding electrons. The fragments, each with an unpaired electron, are free radicals:

A−B→AX ∙ +BX ∙  \ce{A-B -> A^. + B^.}

ClClhν or heatCl2
Figure 13.61 Homolytic fission of chlorine: each Cl atom takes one electron of the bond, giving two chlorine free radicals.

Homolytic fission happens mostly with non-polar bonds, in the gas phase or in non-polar solvents, and needs energy: heat, light (ultraviolet, hν), or an initiator such as an organic peroxide, whose weak O–O bond breaks easily. It starts the chlorination of methane in sunlight, and the cracking of petroleum.

b. Heterolytic fission

In heterolytic fission (Greek heteros, different) the bond breaks unevenly: both bonding electrons go to the more electronegative atom. That atom becomes a negative ion, and the other a positive ion:

A−B→AX++BX−(B more electronegative than A) \ce{A-B -> A+ + B-} \quad \text{(B more electronegative than A)}
A−B→AX−+BX+(A more electronegative than B) \ce{A-B -> A- + B+} \quad \text{(A more electronegative than B)}

CClHHHC+HHH++Cl−
Figure 13.62 Heterolytic fission of chloromethane: chlorine, the more electronegative atom, takes both electrons, giving a chloride ion and a methyl carbocation.
CH3CH2ClCH3CH2++Cl−
Figure 13.63 Chloroethane gives an ethyl carbocation and a chloride ion.

A positive ion with the charge on a carbon, like CH₃⁺, is a carbocation; a negative one, like CH₃⁻, a carbanion. Heterolytic fission happens mostly with polar bonds in polar solvents such as water, which surround and stabilize the ions as they form.

C+HHH+carbocationC−HHH−carbanionCHHHfree radical
Figure 13.64 Three reactive intermediates of carbon: a carbocation (six outer electrons, positive), a carbanion (eight, with a lone pair, negative) and a free radical (seven, one unpaired, neutral).

13.7.2 Electrophiles, nucleophiles and free radicals

Look at NO₂⁺ and CH₃⁺. What charge do they have? Will they be attracted to a part of a molecule that is rich in electrons, or to one that is short of them?

Both are positive and short of electrons, so they are drawn to electron-rich places. Most reagents are of one of two kinds, named by what they are attracted to.

a. Electrophiles

Electrophiles (“electron-loving”) are reagents that are short of electrons and attack a part of the substrate that is rich in electrons (a C=C double bond, a benzene ring, a lone pair). They accept a pair of electrons to make a new bond. They are either positive ions or neutral molecules with an electron-deficient atom (one with fewer than eight outer electrons, or made positive by bonds to electronegative atoms):

  • positive: NO₂⁺ (nitronium ion), CH₃⁺ and other carbocations, Br⁺, Cl⁺, I⁺, H₃O⁺ (H⁺);
  • neutral: BF₃, AlCl₃ and FeCl₃ (six electrons round B, Al or Fe’s incomplete shell), SO₃ (its S made very positive by three oxygens).
ON+O+nitronium ionFBFFboron trifluoride
Figure 13.65 Two electrophiles: the nitronium ion and boron trifluoride, whose boron has only six outer electrons.

b. Nucleophiles

Nucleophiles (“nucleus-loving”, drawn to positive charge) are reagents that are rich in electrons and attack a part of the substrate that is short of electrons (a δ+ carbon). They give a pair of electrons to make a new bond. They are either negative ions or neutral molecules with a lone pair:

  • negative: OH⁻, CH₃O⁻ (RO⁻), CN⁻, NH₂⁻, Cl⁻, Br⁻, I⁻;
  • neutral: NH₃, H₂O, RNH₂ (amines), ROH (alcohols), R–O–R (ethers).
O−H−hydroxideC−N−cyanideNHHHammoniaOHHwaterO−H−hydroxideC−N−cyanideNHHHammoniaOHHwater
Figure 13.66 Four nucleophiles: each has a lone pair to give.

In Figure 13.67 a hydroxide ion, a nucleophile, attacks bromoethane. The C–Br bond is polar: bromine, more electronegative, pulls the bonding electrons and leaves the carbon δ+. The OH⁻ gives a lone pair to that carbon, and the C–Br bond’s pair goes off with the bromine as a bromide ion. Bromoethane is the substrate, OH⁻ the reagent (a nucleophile), and Br⁻ the leaving group.

HO−nucleophile+CH3CH2Brδ+δ−substrateCH3CH2OH+Br−leaving groupHO−nucleophile+CH3CH2Brδ+δ−substrateCH3CH2OH+Br−leaving group
Figure 13.67 A nucleophile at work: OH⁻ attacks the δ+ carbon of bromoethane, and Br⁻ leaves. The product is ethanol.
Electrophile Nucleophile
Meaning electron-loving nucleus-loving
Electrons short of electrons rich in electrons (a lone pair)
In a new bond accepts an electron pair gives an electron pair
Kind of species positive ions, or neutral with an incomplete octet negative ions, or neutral with a lone pair
Attacks an electron-rich part (C=C, benzene ring) an electron-poor part (δ+ carbon)
Examples NO₂⁺, CH₃⁺, H⁺, BF₃, AlCl₃ OH⁻, CN⁻, Cl⁻, NH₃, H₂O
As acids and bases Lewis acids Lewis bases

c. Free radicals

A free radical is an atom or group of atoms with an unpaired electron. Most are very reactive, because the lone electron seeks a partner, and neutral (not charged). A radical whose unpaired electron is on a carbon is a carbon free radical. Free radicals are formed by homolytic fission, and are written with a dot for the unpaired electron:

CHX3−CHX3→energyCHX3X ∙ +CHX3X ∙ (methyl free radicals) \ce{CH3-CH3 ->[\text{energy}] CH3^. + CH3^.} \quad \text{(methyl free radicals)}
H−H→energyHX ∙ +HX ∙ (hydrogen atoms, free radicals) \ce{H-H ->[\text{energy}] H^. + H^.} \quad \text{(hydrogen atoms, free radicals)}

CH3CH3heatCHHH2
Figure 13.68 Homolytic fission of ethane gives two methyl free radicals.

Which of these is formed by homolytic fission?

Pick an answer to see why.

Which of these can act as a nucleophile?

Pick an answer to see why.

13.7.3 Inductive effect

In a bond between two different atoms X and Y, the shared pair isn’t shared equally. If Y is more electronegative than X, it pulls the bonding electrons towards itself: Y gets a small negative charge, δ−, and X a small positive charge, δ+. The σ bond is polarized.

That pull doesn’t stop at the first bond. The δ+ atom X, now short of electrons, pulls in turn a little on the electrons of the next bond, and that atom on the next, more and more weakly down the chain (Figure 13.69). This permanent shift of σ-bond electrons along a chain, caused by a difference in electronegativity, is the inductive effect (I effect). It is drawn with an arrowhead in the middle of the bond, pointing the way the electrons are pulled, and it fades fast: after about three bonds it is almost nothing.

The pull fades along the chainCH₃δδδ+CH₂δδ+CH₂δ+Clδ−electrons pulled towards Cl, the electronegative atom+I: pushesH₃CCOO⁻weaker acid−I: pullsCl₃CCOO⁻stronger acid
Figure 13.69 The inductive effect. Above: chlorine pulls electrons from carbon 1 (δ+), which pulls a little from carbon 2 (δδ+), and that from carbon 3 (δδδ+). Below: an alkyl group pushes electrons towards the carbon it is joined to (+I), and three chlorines pull them away (−I).

The inductive effect of an atom or group is measured against hydrogen.

a. Positive inductive effect (+I)

Groups that push electrons along the σ bond towards the carbon (or atom) they are joined to, more than hydrogen does, are electron-releasing groups, and have a positive inductive effect (+I). The alkyl groups are the main ones; the more branched the group, the stronger its push:

(CH3)3C–>(CH3)2CH–>CH3CH2–>CH3– (\text{CH}_3)_3\text{C}– > (\text{CH}_3)_2\text{CH}– > \text{CH}_3\text{CH}_2– > \text{CH}_3–

In propanoic acid, CH₃CH₂–COOH, the ethyl group pushes electrons towards the carboxyl carbon.

b. Negative inductive effect (−I)

Groups that pull electrons away from the carbon they are joined to, more than hydrogen does, are electron-withdrawing groups, and have a negative inductive effect (−I). In chloromethane, chlorine pulls electrons from the carbon (Figure 13.70); in the trichloroethanoate ion, three chlorines pull them from the carbon they share.

CClHHHδ+δ−
Figure 13.70 Chloromethane: the C–Cl bond is polarized, δ+ on carbon and δ− on chlorine.

−I groups, roughly from the strongest: –NO₂ > –CN > –F > –Cl > –Br > –I > –COOH > –OH > –C₆H₅.

What the inductive effect does: acid strength

A carboxylic acid is acidic because it can give away H⁺ and leave a negative ion, RCOO⁻. Anything that spreads out that negative charge makes the ion more stable, and the acid stronger. A −I group pulls electrons, and with them some of the charge, away from the COO⁻: it strengthens the acid. A +I group pushes more electrons onto the COO⁻: it weakens the acid.

Ethanoic acid and its chloro acidsCH₃COOH4.76ClCH₂COOH2.87Cl₂CHCOOH1.35Cl₃CCOOH0.66Butanoic acid: where the chlorine isbutanoic acid4.824-chloro4.523-chloro4.052-chloro2.86543210pKₐ: smaller is a stronger acid →
Figure 13.71 Acid strength measured as pKₐ (the smaller the pKₐ, the stronger the acid). Each chlorine on ethanoic acid makes it stronger; a chlorine on butanoic acid helps less the farther it is from the COOH.

So chloroethanoic acid is nearly 80 times as strong as ethanoic acid, and trichloroethanoic acid more than ten thousand times. And a chlorine far from the COOH helps little: in 4-chlorobutanoic acid it is three carbons away, and the acid is hardly stronger than butanoic acid itself.

Which acid is the strongest?

Pick an answer to see why.

13.7.4 Resonance effect (+R and −R)

Look at the two structures of benzene in Figure 13.72. Are they the same?

Figure 13.72 The two Kekulé structures of benzene, joined by a double-headed arrow. The curly arrows show the π electrons moving round to turn one into the other.

The two structures have the same atoms in the same places; only the positions of the double bonds differ. Neither one is the real benzene. In the real molecule the six π electrons are spread evenly round the whole ring (delocalized): all six C–C bonds are the same length, 139 pm, between a single bond (154 pm) and a double bond (134 pm). The real structure is a resonance hybrid of the two, often drawn as a hexagon with a circle inside.

When a molecule can be drawn by two or more structures that have the same arrangement of atoms but a different arrangement of π electrons or lone pairs, these are its resonance structures (resonating or canonical structures). They are joined by a double-headed arrow, ↔ (not the ⇌ of an equilibrium: the molecule doesn’t switch between them, it is one thing all the time). The real molecule, the hybrid, is more stable than any one of them: this extra stability is the resonance energy. Resonance happens in open chains (the carboxylate ion, buta-1,3-diene) as well as in rings.

When a group is joined to a chain or ring with π bonds, its own π electrons or lone pairs can be delocalized with them. Moving electrons in this way, through π bonds, a group can push electron density into the rest of the molecule or pull it out. This is the resonance effect (or mesomeric effect, R or M).

i. Positive resonance effect (+R)

A group with a lone pair on the atom joined to the ring (or the C=C) can push that pair into the π system: it releases electrons by delocalization, and the electron density of the ring rises, most of all at the ortho and para carbons (next to the group, and opposite it). Such groups show the positive resonance effect (+R): –OH, –OR, –NH₂, –NHR, –SH, –Cl, –Br.

OHOH+−OH+−OH+−OHOH+−OH+−OH+−
Figure 13.73 Phenol’s resonance structures. A lone pair on oxygen moves into the ring, and the negative charge appears at the two ortho carbons and the para carbon.

That is why phenol reacts with bromine water at once, at room temperature, while benzene needs a catalyst: its ortho and para carbons are rich in electrons and attract the electrophile.

ii. Negative resonance effect (−R)

A group joined to the ring by a multiple bond to an electronegative atom (C=O, N=O, C≡N) can pull π electrons out of the ring and onto that atom: it withdraws electrons by delocalization, and the electron density of the ring falls, most of all at the ortho and para carbons, which become δ+. Such groups show the negative resonance effect (−R): –NO₂, –CHO, >C=O, –COOH, –COOR, –C≡N.

O−N+OO−N+O−+O−N+O−+O−N+O−+O−N+OO−N+O−+O−N+O−+O−N+O−+
Figure 13.74 Nitrobenzene’s resonance structures. The nitro group pulls π electrons out of the ring, leaving a positive charge at the ortho and para carbons.

In benzaldehyde the C=O group does the same (Figure 13.75).

OO−+O−+O−+OO−+O−+O−+
Figure 13.75 Benzaldehyde’s resonance structures: the oxygen of the CHO group takes the π electrons, and the ortho and para carbons are left positive.
+R effect −R effect
Electrons released into the π system withdrawn from the π system
Group has a lone pair on the atom joined to the ring a multiple bond to an electronegative atom
Ring’s electron density rises, mostly at ortho and para falls, mostly at ortho and para
Examples –OH, –OR, –NH₂, –SH –NO₂, –CHO, –COOH, –CN

Which group shows a positive resonance effect (+R) when it is joined to a benzene ring?

Pick an answer to see why.

Project work

Exercise

A. Multiple choice questions

  1. In the IUPAC name written as W + X + Y + secondary suffix, what do W, X and Y stand for?

Pick an answer to see why.

  1. Match the functional groups A –CHO, B –CONH₂, C –OH and D –COOH with the classes 1 amide, 2 carboxylic acid, 3 aldehyde and 4 alcohol.

Pick an answer to see why.

  1. Which of the following is an electrophile?

Pick an answer to see why.

CH3CHCH3CH2CCH3CH3CH3
Figure 13.76 The compound for question 4.
  1. How many carbon atoms are in the longest chain of the compound shown above, (CH₃)₂CH–CH₂–C(CH₃)₃?

Pick an answer to see why.

  1. What is the IUPAC name of HOOC–CH(OH)–CH(OH)–COOH (tartaric acid)?

Pick an answer to see why.

  1. A sodium extract contains Na⁺ and SCN⁻ ions. Which foreign elements does the organic compound contain?

Pick an answer to see why.

  1. Which formula gives the number of chain isomers of the alkanes from C₄H₁₀ to C₇H₁₆ (n = 4 to 7)?

Pick an answer to see why.

  1. What happens in Lassaigne’s test?

Pick an answer to see why.

  1. An organic compound contains nitrogen and sulphur. What is formed when its sodium extract is treated with iron(III) chloride?

Pick an answer to see why.

  1. Look at these four pairs: CH₃–O–CH₂CH₃ and CH₃CH₂CH₂OH; CH₃CH₂CHO and CH₃COCH₃; CH₃COOCH₃ and CH₃CH₂COOH; CH₃CH₂CN and CH₃CH₂NC. Which statement is true?

Pick an answer to see why.

  1. A carbon atom holds H, CH₃, CH₂CH₃ and a fourth group Z. Which group Z makes the molecule non-superimposable on its mirror image?

Pick an answer to see why.

  1. An organic compound has the empirical formula CH₂O and a molecular mass of 90. What is its molecular formula?

Pick an answer to see why.

  1. Compare A, Cl–CH₂–CH₂–COOH, and B, CH₃–CH₂–CH₂–COOH. Which statement is true?

Pick an answer to see why.

  1. Which of the following is a nucleophile?

Pick an answer to see why.

  1. Which general formula does C₃H₈ fit?

Pick an answer to see why.

B. Short answer questions

1.

Explain the following terms: a. prefix, b. word root, c. primary suffix, d. secondary suffix, e. substituent.

Answer
2.

Write an example of a compound with each of these functional groups: a. –NHCO–, b. –COOH, c. –CHO, d. –O–, e. –CO–O–CO–.

Answer
NCNOHHHH
Figure 13.77 Urea, the compound for questions 3 and 13 of Section B.
3.

Write the chemistry of detecting the nitrogen in urea.

Answer
4.
  • a.Write the differences between a nucleophile and an electrophile.
  • b.Write the differences between chain isomers and position isomers.
Answer
5.

Explain how a sodium extract is prepared and why it is needed. Write the complete reactions for detecting nitrogen as a foreign element.

Answer
NCNSHHHH
Figure 13.78 Thiourea, the compound for question 6.
6.

Explain the process and reactions for detecting the foreign elements in the compound shown above, thiourea, (NH₂)₂CS.

Answer
7.

How many isomers are possible for the molecular formula C₅H₁₂? Write their structures and IUPAC names.

Answer
8.

Explain structural isomerism, with an example of each kind.

Answer
9.

What are optical isomers? Explain, with an example, why a chiral carbon is needed for optical activity.

Answer
10.

Explain each of these terms, with an example: homolytic fission, nucleophile, free radical, inductive effect, electrophile.

Answer
11.

What is Lassaigne’s test? Explain how chlorine is detected in an organic compound such as chloroform, CHCl₃.

Answer
12.

What are geometrical isomers? Explain the E–Z system of naming them.

Answer
13.

Name the elements in the compound shown above question 3, urea. Which of them is not one of the fundamental elements of organic compounds? How is it confirmed by Lassaigne’s test?

Answer
14.

Which property of benzene do the structures in Figure 13.72 show? Write any two features of such structures. Then write any two differences between the +R and −R effects.

Answer
15.

Why is the IUPAC system better than the common system of naming organic compounds?

Answer

C. Long answer questions

CH3CH2CHCH3OH
Figure 13.79 a.
CH3CHCH3CH2CH2CH3
Figure 13.80 b.
CH3CFCH2CH3CH2CClCH2CH3CH3
Figure 13.81 c.
CH3CHOHCH2CCH3O
Figure 13.82 d.
CH3CHCH3CHCHCH3CH3CH2CH2CH2CH2CH3
Figure 13.83 e.
CH3CCH3CH3CHCH3Cl
Figure 13.84 f.
CH3CHBrCOCHCH3CH3
Figure 13.85 g.
CH3CHCH3COOH
Figure 13.86 h.
1.

Write the IUPAC names of the compounds a to h shown above: a. C₂H₅–CH(OH)–CH₃; b. CH₃–CH(CH₃)–CH₂–CH₂–CH₃; c. CH₃–CF(C₂H₅)–CH₂–CCl(C₂H₅)–CH₃; d. CH₃–CH(OH)–CH₂–CO–CH₃; e. CH₃–CH(CH₃)–CH(CH(CH₃)₂)–(CH₂)₄–CH₃; f. (CH₃)₃C–CHCl–CH₃; g. CH₃–CHBr–CO–CH(CH₃)–CH₃; h. (CH₃)₂CH–COOH.

Answer
2.

What is Lassaigne’s test? You are given three unlabeled organic compounds. One contains sulphur and another bromine. How would you find which is which? Write a laboratory report with the procedure and conclusion.

Answer
3.

Who coined the term isomer? Explain the types of isomerism and their subtypes, with an example of each.

Answer
4.
  • a.Write any two differences between optically active and optically inactive organic compounds.
  • b.How is the positive inductive effect different from the negative inductive effect? Explain with examples.
  • c.In the two bond fissions of A–B shown in Figure 13.60, what makes the products different? Give an example of each.
Answer
CH3CH2CCH3CH3Cl
Figure 13.87 The compound for question 5.
5.
  • a.Draw the resonance structures of benzene.
  • b.How is geometrical isomerism different from optical isomerism? Explain with an example of each.
  • c.Is the compound shown above, CH₃–CH₂–CCl(CH₃)–CH₃, optically active? Explain.
Answer
6.

Write the rules for naming monofunctional organic compounds, with examples.

Answer
7.

Write all the steps of Lassaigne’s test for sulphur.

Answer

A companion to your textbook, not a replacement for it: study from the book your school uses, and where the two differ, follow your teacher. Found a mistake? Please tell us.