Skip to content

← Grade 12 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

13 questions

Unit 1 · Rotational Dynamics and Oscillatory Motion

Answer these questions

14.

While watching a gymnast spin, you might wonder how she controls how fast she turns.

  • a.Define moment of inertia and explain how it depends on the distribution of mass.
  • b.State the principle of conservation of angular momentum. Explain why a gymnast spins faster when she pulls in her arms.
  • c.In a stage show, a dancer of mass 60 kg spins on a frictionless turntable with her arms stretched out. Her moment of inertia is 5 kg m² and her angular velocity 2 rad/s. She then pulls her arms in, reducing her moment of inertia to 2 kg m² in 0.5 s. Find:
  • i.her new angular velocity;
  • ii.the change in her rotational kinetic energy;
  • iii.the average torque an outside agent would need to give her the same speed-up, from 2 rad/s to her new angular velocity in 0.5 s, if she kept her arms out (I = 5 kg m²).
Hint

c. i. Angular momentum is conserved. iii. This part imagines a different way to the same spin: τ=IΔωΔt \tau = I\dfrac{\Delta\omega}{\Delta t} with her arms out.

Answer
  • a.The moment of inertia of a body about an axis is the sum of the products of the mass of each of its particles and the square of its perpendicular distance from the axis: I=∑mr2 I = \sum mr^2 . It measures how hard the body is to set turning or to stop. Because each particle counts by the square of its distance, the same mass gives a much larger moment of inertia when it is spread far from the axis than when it is close to it.
  • b.If no external torque acts on a system, its total angular momentum stays constant: Iω= I\omega = constant, or I1ω1=I2ω2 I_1\omega_1 = I_2\omega_2 . When the gymnast pulls in her arms, her mass comes closer to the axis, so her moment of inertia falls. Nothing outside gives her a torque about her spin axis, so Iω I\omega stays the same, and her angular velocity must rise.
  • c.i. I1ω1=I2ω2⇒5×2=2×ω2⇒ω2= I_1\omega_1 = I_2\omega_2 \Rightarrow 5 \times 2 = 2 \times \omega_2 \Rightarrow \omega_2 = 5 rad/s.
  • ii.KE1=12×5×22=10 KE_1 = \tfrac{1}{2} \times 5 \times 2^2 = 10 J; KE2=12×2×52=25 KE_2 = \tfrac{1}{2} \times 2 \times 5^2 = 25 J. Change: 25−10= 25 - 10 = +15 J (an increase, from the work her arms did).
  • iii.τ=Iω2−ω1t=5×5−20.5= \tau = I\dfrac{\omega_2 - \omega_1}{t} = 5 \times \dfrac{5 - 2}{0.5} = 30 N m. (In the real spin there is no outside torque at all: her angular momentum stays 10 kg m²/s; she speeds up only by changing her moment of inertia.)
15.

The motion of a wheel rolling down an incline without slipping combines rotation and translation.

  • a.Define rolling motion and state the condition for pure rolling.
  • b.Derive the relation between the linear velocity and the angular velocity of a body in pure rolling.
  • c.A uniform rod of length 1.2 m and mass 2.4 kg lies on a smooth horizontal surface. A force of 12 N is applied at one end of the rod, perpendicular to it. Find:
  • i.the torque about the rod’s center of mass;
  • ii.the angular acceleration of the rod about its center of mass;
  • iii.the linear acceleration of its center of mass.
Hint

c. A force anywhere on a free body both accelerates its center of mass (F=Ma F = Ma ) and, if it doesn’t pass through the center of mass, turns it (τ=Icmα \tau = I_{\text{cm}}\alpha ).

Answer
  • a.Rolling is the motion of a round body that turns about its axis while its axis moves along a surface: rotation and translation together. It is pure rolling (rolling without slipping) when the point touching the surface is momentarily at rest relative to it, which means the center’s speed equals Rω R\omega .
  • b.Let a body of radius R R roll without slipping, turning at angular velocity ω \omega . In one complete turn, every point of its rim touches the surface once, so its center moves forward one circumference, 2πR 2\pi R . One turn takes T=2πω T = \dfrac{2\pi}{\omega} . So the speed of the center is v=2πRT=2πR2π/ω=Rω v = \dfrac{2\pi R}{T} = \dfrac{2\pi R}{2\pi/\omega} = R\omega .

(Or: the bottom point moves forward with the center at v v and backward round the center at Rω R\omega ; for it to be at rest, v−Rω=0 v - R\omega = 0 , so v=Rω v = R\omega .)

  • c.i. The force acts at the end, 1.22=0.6 \tfrac{1.2}{2} = 0.6 m from the center, at right angles to the rod: τ=12×0.6= \tau = 12 \times 0.6 = 7.2 N m.
  • ii.Icm=Ml212=2.4×1.2212=0.288 I_{\text{cm}} = \dfrac{Ml^2}{12} = \dfrac{2.4 \times 1.2^2}{12} = 0.288 kg m², so α=7.20.288= \alpha = \dfrac{7.2}{0.288} = 25 rad/s².
  • iii.a=FM=122.4= a = \dfrac{F}{M} = \dfrac{12}{2.4} = 5 m/s², the same as if the force acted at the center.
16.

A rigid body turns about a fixed axis, and the way its mass is spread affects its rotational inertia.

  • a.Define radius of gyration. How is it related to the moment of inertia?
  • b.Explain how the moment of inertia differs for bodies such as a ring, a disc and a sphere (any two, with reasons).
  • c.A uniform rod of mass 2 kg and length 1 m lies on a smooth inclined plane at 30° to the horizontal. It is hinged at one end to the plane, with the hinge’s axis at right angles to the plane, so the rod can swing round in the plane of the incline. It is held lying across the slope (horizontal), then released, and starts to swing down the slope. Find, just after it is released:
  • i.the torque on the rod about the hinge;
  • ii.its angular acceleration. (g = 9.8 m/s²)
Hint

c. Only the part of the weight along the incline, Mgsin⁡30° Mg\sin 30° , acts in the plane the rod swings in. It acts at the rod’s center, at right angles to the rod.

Answer
  • a.The radius of gyration of a body about an axis is the distance from the axis at which the whole mass of the body, placed at one point, would have the same moment of inertia as the body. It is related to the moment of inertia by I=MK2 I = MK^2 , or K=I/M K = \sqrt{I/M} .
  • b.For the same mass M M and radius R R :
  • A ring turning about its axis has all its mass at the full radius R R , so I=MR2 I = MR^2 , the largest possible for its size.
  • A disc has its mass spread from the center to the rim; much of it is close to the axis, so I=12MR2 I = \tfrac{1}{2}MR^2 , half the ring’s.
  • A solid sphere has even more of its mass close to the axis (the parts near its poles and its core), so I=25MR2 I = \tfrac{2}{5}MR^2 , the smallest of the three.

The more of a body’s mass that lies far from the axis, the larger its moment of inertia.
c. i. In the plane of the incline, the weight’s part down the slope is Mgsin⁡30°=2×9.8×0.5=9.8 Mg\sin 30° = 2 \times 9.8 \times 0.5 = 9.8 N, acting at the center, 0.5 m from the hinge and at right angles to the horizontal rod:
τ=9.8×0.5= \tau = 9.8 \times 0.5 = 4.9 N m.
ii. About its end, I=Ml23=2×123=0.667 I = \dfrac{Ml^2}{3} = \dfrac{2 \times 1^2}{3} = 0.667 kg m², so
α=τI=4.90.667= \alpha = \dfrac{\tau}{I} = \dfrac{4.9}{0.667} = 7.35 rad/s².

17.

The torque needed to turn a rigid body plays a central part in its dynamics.

  • i.Define torque and give its SI unit. Write its vector formula and explain each term.
  • ii.State the relation between torque and angular acceleration. What is the rotational analog of Newton’s second law?
  • iii.A steady torque of 1000 N m turns a wheel of moment of inertia 200 kg m² about an axis through its center. Find its angular velocity after 3 s, starting from rest.
Answer
  • i.Torque is the turning effect of a force: the product of the force and the perpendicular distance of its line of action from the axis of rotation. SI unit: N m. As a vector, τ⃗=r⃗×F⃗ \vec\tau = \vec r \times \vec F , where r⃗ \vec r is the position vector of the point where the force acts, measured from the axis (or point) of rotation, and F⃗ \vec F is the force. Its size is rFsin⁡θ rF\sin\theta , θ being the angle between r⃗ \vec r and F⃗ \vec F ; its direction is along the axis, perpendicular to both, by the right-hand rule.
  • ii.τ=Iα \tau = I\alpha : the torque on a rigid body about a fixed axis equals its moment of inertia about that axis times its angular acceleration. This is the rotational analog of Newton’s second law, F=ma F = ma , with torque for force, moment of inertia for mass and angular acceleration for acceleration. (In terms of momentum: τ=dLdt \tau = \dfrac{dL}{dt} , like F=dpdt F = \dfrac{dp}{dt} .)
  • iii.α=τI=1000200=5 \alpha = \dfrac{\tau}{I} = \dfrac{1000}{200} = 5 rad/s². From rest, ω=0+5×3= \omega = 0 + 5 \times 3 = 15 rad/s.
18.

A body turns with a constant angular acceleration under a constant torque.

  • a.Define angular acceleration. Write the equations of rotational motion for constant angular acceleration.
  • b.Distinguish between angular displacement, angular velocity and angular acceleration.
  • c.A disc starts from rest and speeds up uniformly to 20 rad/s in 5 s. Find i. its angular acceleration, ii. the angle it turns through in this time.
Answer

a. Angular acceleration is the rate of change of angular velocity, α=dωdt \alpha = \dfrac{d\omega}{dt} ; its unit is rad/s². For constant α, with initial angular velocity ω0 \omega_0 :
ω=ω0+αt \omega = \omega_0 + \alpha t , θ=ω0t+12αt2 \theta = \omega_0t + \tfrac{1}{2}\alpha t^2 , ω2=ω02+2αθ \omega^2 = \omega_0^2 + 2\alpha\theta .
b.

Angular displacement Angular velocity Angular acceleration
What it is the angle turned through about the axis the rate of change of angular displacement the rate of change of angular velocity
Formula θ (= arc ÷ radius) ω=dθdt \omega = \dfrac{d\theta}{dt} α=dωdt \alpha = \dfrac{d\omega}{dt}
SI unit rad rad/s rad/s²
Linear partner displacement velocity acceleration
  • c.i. α=ω−ω0t=20−05= \alpha = \dfrac{\omega - \omega_0}{t} = \dfrac{20 - 0}{5} = 4 rad/s².
  • ii.θ=ω0t+12αt2=0+12×4×52= \theta = \omega_0t + \tfrac{1}{2}\alpha t^2 = 0 + \tfrac{1}{2} \times 4 \times 5^2 = 50 rad (about 8 turns).
19.

Suppose a flywheel turns about its center, with masses attached symmetrically at different distances.

  • a.Define center of mass. How does its position affect the stability of a turning body?
  • b.Explain rotational kinetic energy. How is it different from translational kinetic energy?
  • c.Two masses, 1 kg and 2 kg, are fixed on a light (massless) rod, at 0.2 m and 0.1 m from its center O, as in the figure below. Find the moment of inertia of the system about an axis through O, perpendicular to the rod.
O2 kg1 kg0.1 m0.2 m
Figure 1.16 For question 19c.
Answer
  • a.The center of mass of a body is the point at which its whole mass can be taken to be concentrated, for describing its motion as a whole: a force through it moves the body without turning it. For a body turning about a fixed axis, if the center of mass lies on the axis (the masses balanced round it), its weight gives no torque about the axis and the axle feels no wobbling force as it spins, so it turns smoothly and steadily. If the center of mass is off the axis, the body is out of balance: gravity tends to turn it to bring the center of mass lowest, and at speed the shaking forces on the axle can damage it. This is why wheels are balanced with small weights at a garage.
  • b.Rotational kinetic energy is the kinetic energy a body has because it turns: the sum of the kinetic energies of all its particles going round their circles, KErot=12Iω2 KE_{\text{rot}} = \tfrac{1}{2}I\omega^2 . Translational kinetic energy, 12mv2 \tfrac{1}{2}mv^2 , is the energy of a body’s motion as a whole from place to place. A wheel spinning on a fixed axle has only rotational kinetic energy; a box sliding along has only translational; a rolling wheel has both. Rotational KE depends on how the mass is spread (through I I ), translational KE only on the total mass.
  • c.I=∑mr2=1×0.22+2×0.12=0.04+0.02= I = \sum mr^2 = 1 \times 0.2^2 + 2 \times 0.1^2 = 0.04 + 0.02 = 0.06 kg m².
20.

Long rods turning about different axes behave differently, depending on how their mass is spread.

  • a.Why is the moment of inertia called the rotational analog of mass?
  • b.Derive the expression for the moment of inertia of a uniform rod about an axis through its center, perpendicular to its length.
  • c.A rod of mass 5 kg and length 1 m turns about its center. Find its moment of inertia, and its rotational kinetic energy when it turns at 12 rad/s.
Answer
  • a.Mass measures how hard it is to change a body’s straight-line motion (F=ma F = ma ); moment of inertia measures how hard it is to change its turning (τ=Iα \tau = I\alpha ). It takes mass’s place in every turning formula: L=Iω L = I\omega for p=mv p = mv , 12Iω2 \tfrac{1}{2}I\omega^2 for 12mv2 \tfrac{1}{2}mv^2 . The one difference is that it depends on where the mass is, not only how much.
  • b.Take a uniform rod of mass M M and length l l , the origin at its center, the rod along the x-axis from −l/2 -l/2 to +l/2 +l/2 . A piece of length dx dx at distance x x has mass dm=Mldx dm = \dfrac{M}{l}dx and moment of inertia dI=x2 dm=Mlx2 dx dI = x^2\,dm = \dfrac{M}{l}x^2\,dx . So

I=∫−l/2l/2Mlx2 dx=Ml[x33]−l/2l/2=Ml×23×l38=Ml212 I = \displaystyle\int_{-l/2}^{l/2}\frac{M}{l}x^2\,dx = \frac{M}{l}\left[\frac{x^3}{3}\right]_{-l/2}^{l/2} = \frac{M}{l} \times \frac{2}{3} \times \frac{l^3}{8} = \frac{Ml^2}{12} .
c. I=5×1212= I = \dfrac{5 \times 1^2}{12} = 0.417 kg m².
KE=12Iω2=12×0.4167×122= KE = \tfrac{1}{2}I\omega^2 = \tfrac{1}{2} \times 0.4167 \times 12^2 = 30 J.

21.

A uniform rod of length L and mass M is pivoted at its center and can turn freely in a horizontal plane. Two small masses, m1 m_1 and m2 m_2 , are fixed at equal distances from the center, at its two ends.

seen from abovepivotm₁m₂rod, mass ML
Figure 1.17 For question 21: a uniform rod pivoted at its center with a small mass at each end.
  • a.Write the expression for the total moment of inertia of the system about the central pivot, naming each term.
  • b.How will the moment of inertia change if one mass is moved closer to the center? Explain.
  • c.The rod has mass M = 3 kg and length L = 1.2 m; the point masses are m1=m2=1 m_1 = m_2 = 1 kg, each 0.6 m from the center. Find the total moment of inertia about the center.
Answer
  • a.I=ML212+m1(L2)2+m2(L2)2 I = \dfrac{ML^2}{12} + m_1\left(\dfrac{L}{2}\right)^2 + m_2\left(\dfrac{L}{2}\right)^2 : the first term is the rod’s own moment of inertia about its center, the other two are the point masses, each its mass times the square of its distance from the pivot.
  • b.It decreases. The moved mass is now nearer the axis, so its mr2 mr^2 is smaller; the other terms are unchanged.
  • c.Rod: 3×1.2212=0.36 \dfrac{3 \times 1.2^2}{12} = 0.36 kg m². Masses: 2×1×0.62=0.72 2 \times 1 \times 0.6^2 = 0.72 kg m². Total: 1.08 kg m².
22.

A figure skater shows how angular momentum is conserved by changing her body position mid-spin.

  • a.Define angular momentum for a rotating body and give its SI unit.
  • b.State and explain the principle of conservation of angular momentum. Give one real-life example other than a skater.
  • c.A skater of moment of inertia 3 kg m² spins at 4 rad/s. She pulls in her arms, reducing her moment of inertia to 1.5 kg m². Find her new angular velocity. What does this tell us about angular momentum?
Answer
  • a.The angular momentum of a body turning about an axis is the product of its moment of inertia about the axis and its angular velocity, L=Iω L = I\omega (for a particle, the moment of its linear momentum, L⃗=r⃗×p⃗ \vec L = \vec r \times \vec p ). SI unit: kg m²/s.
  • b.If no external torque acts on a system, its total angular momentum stays constant: I1ω1=I2ω2 I_1\omega_1 = I_2\omega_2 . Since τ=dL/dt \tau = dL/dt , zero torque means L L cannot change; so if the moment of inertia changes, the angular velocity changes the opposite way. Example: a diver tucks in to somersault faster; or a planet moves faster when it is nearer the Sun.
  • c.ω2=I1ω1I2=3×41.5= \omega_2 = \dfrac{I_1\omega_1}{I_2} = \dfrac{3 \times 4}{1.5} = 8 rad/s. Her angular momentum is 3×4=12 3 \times 4 = 12 kg m²/s before and 1.5×8=12 1.5 \times 8 = 12 kg m²/s after: it is conserved, because no outside torque acted during the change. She spins faster only because her moment of inertia fell.
23.
  • a.Derive the formula for the work done by a torque in producing an angular displacement.
  • b.A steady torque of 8 N m is applied to a wheel. It turns through 5 rad in 2 s. Find the work done and the average power delivered.
Answer
  • a.Let a force F F act along the tangent at the rim of a wheel of radius r r , so its torque is τ=Fr \tau = Fr . When the wheel turns through a small angle dθ d\theta , the point where the force acts moves along the arc ds=r dθ ds = r\,d\theta , in the direction of the force. The work done is dW=F ds=Fr dθ=τ dθ dW = F\,ds = Fr\,d\theta = \tau\,d\theta . For a steady torque turning the wheel through θ, W=τθ W = \tau\theta (θ in radians).
  • b.W=τθ=8×5= W = \tau\theta = 8 \times 5 = 40 J. Average power P=Wt=402= P = \dfrac{W}{t} = \dfrac{40}{2} = 20 W.
24.

A ballet dancer spins with her arms stretched out, then pulls her arms in and spins faster.

  • a.Name and state the physical principle that explains why her angular velocity increases.
  • b.Derive the relation between angular momentum and moment of inertia for a rotating body.
  • c.Her moment of inertia is 4 kg m² and her angular velocity 2 rad/s. She reduces her moment of inertia to 2 kg m². Find her new angular velocity.
Answer
  • a.The principle of conservation of angular momentum: if no external torque acts on a system, its total angular momentum stays constant (I1ω1=I2ω2 I_1\omega_1 = I_2\omega_2 ). Pulling her arms in reduces her moment of inertia, so her angular velocity rises.
  • b.Let a rigid body turn with angular velocity ω \omega about a fixed axis, its particles m1,m2,… m_1, m_2, \dots at distances r1,r2,… r_1, r_2, \dots from the axis. A particle at ri r_i moves round its circle at vi=riω v_i = r_i\omega , so its angular momentum about the axis is miviri=miri2ω m_iv_ir_i = m_ir_i^2\omega . Adding them, with the same ω for all: L=(∑miri2)ω=Iω L = \left(\sum m_ir_i^2\right)\omega = I\omega .
  • c.ω2=I1ω1I2=4×22= \omega_2 = \dfrac{I_1\omega_1}{I_2} = \dfrac{4 \times 2}{2} = 4 rad/s.
25.

A uniform rod of length L and mass M can turn in a horizontal plane about an axis through its center, perpendicular to its length. Two small masses m1 m_1 and m2 m_2 are fixed at distances d1 d_1 and d2 d_2 from the center.

  • a.What is the significance of moment of inertia in rotational motion?
  • b.Write the formula for the moment of inertia of the uniform rod about this axis.
  • c.State the principle of conservation of angular momentum with a real-life example.
  • d.Find the total moment of inertia of the system (rod and masses) about the axis. If the system starts from rest and turns under a steady torque τ, find i. its angular acceleration α, ii. its angular velocity after turning through an angle θ.

Given: M = 6 kg, L = 2 m, m1=2 m_1 = 2 kg at d1=0.5 d_1 = 0.5 m, m2=3 m_2 = 3 kg at d2=0.8 d_2 = 0.8 m, τ = 12 N m, θ = π rad. (Take Irod=112ML2 I_{\text{rod}} = \tfrac{1}{12}ML^2 .)

Answer
  • a.Moment of inertia does for turning what mass does for straight-line motion: it is the body’s resistance to a change in its turning. For a given torque, a large moment of inertia means a small angular acceleration (α=τ/I \alpha = \tau/I ); it also sets a turning body’s angular momentum (Iω I\omega ) and kinetic energy (12Iω2 \tfrac{1}{2}I\omega^2 ).
  • b.Irod=ML212 I_{\text{rod}} = \dfrac{ML^2}{12} .
  • c.If no external torque acts, the total angular momentum of a system stays constant, I1ω1=I2ω2 I_1\omega_1 = I_2\omega_2 . Example: a diver tucks in to turn faster in a somersault.
  • d.I=6×2212+2×0.52+3×0.82=2+0.5+1.92= I = \dfrac{6 \times 2^2}{12} + 2 \times 0.5^2 + 3 \times 0.8^2 = 2 + 0.5 + 1.92 = 4.42 kg m².
  • i.α=τI=124.42= \alpha = \dfrac{\tau}{I} = \dfrac{12}{4.42} = 2.71 rad/s².
  • ii.From rest, ω2=0+2αθ=2×2.715×π=17.06 \omega^2 = 0 + 2\alpha\theta = 2 \times 2.715 \times \pi = 17.06 , so ω= \omega = 4.13 rad/s.
26.

A figure skater of moment of inertia I1 I_1 spins at angular velocity ω1 \omega_1 with her arms stretched out. She then pulls her arms in, reducing her moment of inertia to I2 I_2 .

  • a.Define angular momentum and state its SI unit.
  • b.State the principle of conservation of angular momentum.
  • c.Explain why the skater spins faster after pulling her arms in.
  • d.Given I1=5 I_1 = 5 kg m², ω1=2 \omega_1 = 2 rad/s and I2=2 I_2 = 2 kg m², find i. her new angular velocity ω2 \omega_2 , ii. the change in her rotational kinetic energy (KE=12Iω2 KE = \tfrac{1}{2}I\omega^2 ).
Answer
  • a.Angular momentum of a body about an axis is its moment of inertia times its angular velocity, L=Iω L = I\omega : the turning equivalent of linear momentum. SI unit: kg m²/s.
  • b.If no external torque acts on a system, its total angular momentum remains constant.
  • c.Pulling her arms in brings mass closer to the spin axis, so her moment of inertia falls from I1 I_1 to I2 I_2 . There is no outside torque about the vertical axis (the ice is nearly frictionless), so Iω I\omega can’t change: with a smaller I I , ω \omega must be larger.
  • d.i. ω2=I1ω1I2=5×22= \omega_2 = \dfrac{I_1\omega_1}{I_2} = \dfrac{5 \times 2}{2} = 5 rad/s.
  • ii.KE1=12×5×22=10 KE_1 = \tfrac{1}{2} \times 5 \times 2^2 = 10 J, KE2=12×2×52=25 KE_2 = \tfrac{1}{2} \times 2 \times 5^2 = 25 J: an increase of 15 J, supplied by the work her arms do pulling inward.