Skip to content

← Grade 12 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

16 questions

Unit 12 · Diffraction

Answer these questions

13.

Diffraction is a key wave phenomenon: light bends round obstacles or through small openings, making characteristic patterns on a screen.

  • a.Define diffraction of light. Under what conditions is diffraction significant?
  • b.Differentiate interference from diffraction, based on their sources and on how the fringes form.
  • c.Light of wavelength 500 nm passes through a single slit of width 0.1 mm. Calculate the angular width of the central maximum, and its width on a screen 2 m away.
Hint

c. Angular width 2λ/d 2\lambda/d ; width on the screen 2λD/d 2\lambda D/d .

Answer

a. Diffraction is the bending and spreading of light round the edge of an obstacle or through a narrow opening, into the region of the geometrical shadow. It is significant when the size of the opening or obstacle is comparable to the wavelength of light (for visible light, a fraction of a millimeter or less), and when the source is small (a point or a narrow line) and gives monochromatic light.
b.

Interference Diffraction
Sources waves from two (or more) separate coherent sources, e.g. two slits secondary wavelets from different points of the same wavefront, across one opening
Fringe width all the bright fringes equally wide central maximum twice as wide as the others
Brightness all the bright fringes about equally bright brightness falls quickly away from the center
Contrast bright and dark fringes stand out clearly across the whole pattern the side bands are faint, so they stand out poorly from the dark bands between them
Number of fringes many fringes only a few bands are visible

c. λ=5.0×10−7 \lambda = 5.0 \times 10^{-7} m, d=1.0×10−4 d = 1.0 \times 10^{-4} m, D=2 D = 2 m.
Angular width =2λd=2×5.0×10−71.0×10−4= = \dfrac{2\lambda}{d} = \dfrac{2 \times 5.0 \times 10^{-7}}{1.0 \times 10^{-4}} = 0.01 rad (about 0.57°).
Width on the screen =2λDd=0.01×2=0.02 = \dfrac{2\lambda D}{d} = 0.01 \times 2 = 0.02 m = 2 cm.

14.

When light meets obstacles or narrow openings, it bends and spreads: diffraction. Under what conditions does this bending become prominent, and how do the positions of the source and the screen decide which type of diffraction pattern is seen?

Answer

The bending is prominent when the opening or obstacle is comparable in size to the wavelength of the light: the narrower the slit (or the longer the wavelength), the more the light spreads. For light, slits and obstacles must be a fraction of a millimeter or less. A small, bright, monochromatic source, such as a laser, makes the pattern easy to see.
The type of pattern depends on the distances of the source and the screen from the opening:

  • If the source or the screen (or both) is close, at a finite distance, the wavefronts at the opening are curved, and we get Fresnel diffraction: the pattern depends on the distances and is complicated (the fringes at a shadow’s edge are an example).
  • If both are effectively at infinity (in practice, lenses make the light parallel before the slit and focus it after, or a laser and a distant screen are used), the wavefronts are plane, and we get Fraunhofer diffraction: a simple pattern of a bright central band with fainter bands on each side, whose shape doesn’t change with distance.
15.

The bending of light becomes more prominent in narrow apertures, and is classified into distinct types.

  • a.Compare Fresnel and Fraunhofer diffraction, with diagrams or descriptions of the setup.
  • b.Derive the condition for minima in single-slit diffraction using geometry.
  • c.A single slit of width 0.2 mm is lit by light of wavelength 600 nm. Calculate the angular position of the first minimum.
  • d.Why is light partially polarized when it reflects from a non-metallic surface?
Hint

d. Look ahead to Unit 13: at a surface, the two directions of vibration (along the surface, and in the plane of incidence) are reflected by different amounts.

Answer

a. Setups as in Figure 12.3.

Fresnel Fraunhofer
Source and screen at finite distances from the slit effectively at infinity
Wavefront at the slit curved (spherical or cylindrical) plane
Lenses none a convex lens before the slit makes the light parallel; one after it focuses each direction on the screen
Pattern depends on the distances; complicated simple: central maximum and fainter bands

b. As in section 12.3: a plane wavefront falls on a slit AB of width d d . Consider the light leaving at an angle θ \theta , focused at P. Drawing AE perpendicular to the ray from B, the path difference between the edges is BE=dsin⁡θ BE = d\sin\theta . If BE=λ BE = \lambda , divide the slit into two halves; each point in the upper half has a partner d/2 d/2 below it in the lower half, with path difference (d/2)sin⁡θ=λ/2 (d/2)\sin\theta = \lambda/2 . Every pair cancels, so P is dark: dsin⁡θ=λ d\sin\theta = \lambda . If BE=2λ BE = 2\lambda , divide the slit into four parts, which cancel in pairs: dark again. In general, if BE=nλ BE = n\lambda , the slit divides into 2n 2n parts that cancel in pairs, so the minima are at
dsin⁡θn=nλ,n=1,2,3,… d\sin\theta_n = n\lambda, \qquad n = 1, 2, 3, \dots

  • c.sin⁡θ1=λd=6.0×10−72.0×10−4=3.0×10−3 \sin\theta_1 = \dfrac{\lambda}{d} = \dfrac{6.0 \times 10^{-7}}{2.0 \times 10^{-4}} = 3.0 \times 10^{-3} , so θ1= \theta_1 = 3.0 × 10⁻³ rad = 0.17°.
  • d.Unpolarized light has vibrations in all directions across the ray; they can be split into two parts, one vibrating parallel to the surface and one in the plane of incidence. At a transparent, non-metallic surface such as glass or water, the part vibrating parallel to the surface is reflected more strongly than the part in the plane of incidence (which, at one angle, Brewster’s angle, isn’t reflected at all). So the reflected light has more vibrations in one direction than the other: it is partially polarized, and completely polarized at Brewster’s angle (Unit 13).
16.

Diffraction gratings disperse light into its components, helping us analyze wavelengths.

  • a.What is a diffraction grating? Mention two practical applications.
  • b.State and explain the grating equation for constructive interference.
  • c.A diffraction grating has 6000 lines/cm. Find the angle of the second-order maximum for light of wavelength 500 nm.
Answer
  • a.A diffraction grating is a plate with a large number of equally spaced, parallel, very narrow slits (or lines), typically hundreds to a thousand per millimeter. Uses: in spectrometers, to measure the wavelengths of light and find what stars, flames and chemicals are made of; to measure the wavelength of a laser; in fiber-optic networks to separate signals of different colors; and in everyday things like the color effects of CDs and security holograms.
  • b.(a+b)sin⁡θn=nλ (a + b)\sin\theta_n = n\lambda , where a+b=d a + b = d is the grating element, θn \theta_n the angle of the n n th order bright line and λ \lambda the wavelength. Light leaving neighboring slits at θ \theta differs in path by (a+b)sin⁡θ (a + b)\sin\theta ; when this is a whole number of wavelengths, the wavelets from all the slits arrive in step and add up to a bright line. n=0 n = 0 is the central (straight-through) line; n=1,2… n = 1, 2 \dots give the orders on both sides.
  • c.d=10−26000=1.67×10−6 d = \dfrac{10^{-2}}{6000} = 1.67 \times 10^{-6} m. sin⁡θ2=2λd=2×5.0×10−71.67×10−6=0.60 \sin\theta_2 = \dfrac{2\lambda}{d} = \dfrac{2 \times 5.0 \times 10^{-7}}{1.67 \times 10^{-6}} = 0.60 , so θ2= \theta_2 = 36.9°.
17.

Diffraction limits the resolving power of optical instruments like microscopes and telescopes.

  • a.Define resolving power and explain its relation to diffraction.
  • b.State Rayleigh’s criterion and its relevance to angular resolution.
  • c.Calculate the smallest angular separation between two objects that a telescope with an aperture of 0.2 m can resolve, using light of wavelength 550 nm.
Answer
  • a.Resolving power is the ability of an optical instrument to show two closely spaced objects as separate; it is the reciprocal of the smallest separation (or angle) it can resolve. Diffraction at the instrument’s aperture turns the image of every point into a small disc with rings (the Airy pattern). If two such discs overlap too much, the points can’t be told apart, so diffraction sets a limit: a wider aperture or a shorter wavelength makes the discs smaller and the resolving power greater.
  • b.Rayleigh’s criterion: two point sources are just resolved when the central maximum of one’s diffraction pattern falls on the first minimum of the other’s. For a circular aperture of diameter D D , this gives the smallest resolvable angle, the angular resolution, dθ=1.22λ/D d\theta = 1.22\lambda/D .
  • c.dθ=1.22λD=1.22×550×10−90.2= d\theta = \dfrac{1.22\lambda}{D} = \dfrac{1.22 \times 550 \times 10^{-9}}{0.2} = 3.4 × 10⁻⁶ rad, about 0.69 seconds of arc.
18.

The effect of diffraction depends on the relative sizes of the aperture and the wavelength.

  • a.Why is diffraction insignificant for everyday objects?
  • b.How does diffraction affect the performance of optical instruments?
  • c.A slit of width 0.05 mm is lit by monochromatic light of wavelength 650 nm. Calculate the angular position of the second diffraction minimum.
Answer
  • a.Diffraction is noticeable only when an object or opening is comparable in size to the wavelength. Light’s wavelength is under a micrometer, while everyday objects and openings are millimeters to meters across, millions of times larger; so light spreads by an angle of about λ/d \lambda/d , far too small to notice, and shadows look sharp.
  • b.Every lens or mirror is an aperture that diffracts light, so even a perfect instrument makes each point of an object into a small disc. Details closer than the size of those discs blur together: diffraction sets the limit of resolution, d=λ/2μsin⁡θ d = \lambda/2\mu\sin\theta for a microscope and dθ=1.22λ/D d\theta = 1.22\lambda/D for a telescope. Beyond this, more magnification shows no more detail.
  • c.sin⁡θ2=2λd=2×6.5×10−75.0×10−5=0.026 \sin\theta_2 = \dfrac{2\lambda}{d} = \dfrac{2 \times 6.5 \times 10^{-7}}{5.0 \times 10^{-5}} = 0.026 , so θ2= \theta_2 = 1.49° (0.026 rad).
19.

The behavior of light passing through narrow openings gives insight into the visibility of fringes and diffraction patterns.

  • a.What is the effect on the diffraction pattern if the slit width decreases?
  • b.Compare the intensity and width of the central maximum in single-slit diffraction with those of the central bright fringe in double-slit interference.
  • c.A laser beam of wavelength 650 nm passes through a slit of width 0.1 mm. Calculate the width of the central maximum on a screen 1.5 m away.
Answer
  • a.The pattern spreads out: every minimum and maximum moves away from the center (sin⁡θn=nλ/d \sin\theta_n = n\lambda/d ), and the central maximum becomes wider (width 2λD/d 2\lambda D/d ). It also gets dimmer, because less light passes through the narrower slit.
  • b.In single-slit diffraction, the central maximum is twice as wide as the other bands and much brighter: the first side band is under 5 % of its brightness. In double-slit interference, the central bright fringe is the same width as all the other bright fringes, and (within the slits’ own diffraction envelope) about equally bright.
  • c.Width =2λDd=2×6.5×10−7×1.51.0×10−4=1.95×10−2 = \dfrac{2\lambda D}{d} = \dfrac{2 \times 6.5 \times 10^{-7} \times 1.5}{1.0 \times 10^{-4}} = 1.95 \times 10^{-2} m = 19.5 mm.
20.

The single-slit diffraction pattern is determined by the angular spread and the size of the aperture.

  • a.Define angular width in single-slit diffraction.
  • b.Explain how diffraction influences the resolution of optical instruments.
  • c.Monochromatic light of wavelength 550 nm falls normally on a grating having 4000 lines/cm. Find the angle of the first-order maximum.
  • d.How does Huygens’ principle explain the diffraction of light?
Answer
  • a.The angular width of the central maximum is the angle between the directions of the first minima on either side of it, as seen from the slit: 2θ=2λ/d 2\theta = 2\lambda/d radians (for small angles). Half of it, λ/d \lambda/d , is the angular half-width.
  • b.Diffraction at an instrument’s aperture spreads the image of every point into a small disc with rings. Two points whose discs overlap too much can’t be seen as separate; by Rayleigh’s criterion they are just resolved when the center of one disc lies on the first dark ring of the other. This sets the smallest detail an instrument can show: dθ=1.22λ/D d\theta = 1.22\lambda/D for a telescope, d=λ/2μsin⁡θ d = \lambda/2\mu\sin\theta for a microscope. Larger apertures and shorter wavelengths resolve finer detail.
  • c.d=10−24000=2.5×10−6 d = \dfrac{10^{-2}}{4000} = 2.5 \times 10^{-6} m. sin⁡θ1=λd=5.5×10−72.5×10−6=0.22 \sin\theta_1 = \dfrac{\lambda}{d} = \dfrac{5.5 \times 10^{-7}}{2.5 \times 10^{-6}} = 0.22 , θ1= \theta_1 = 12.7°.
  • d.By Huygens’ principle, every point of a wavefront acts as a source of secondary wavelets, and the new wavefront is the surface touching them. When a wavefront reaches a slit, only the points in the opening send wavelets on; at the edges, the wavelets spread into the region behind the barrier, so the light bends round into the shadow. Wavelets from different points of the opening travel different distances to a point on the screen, so they interfere: where they arrive in step, the screen is bright; where they cancel (when the edges differ by λ,2λ… \lambda, 2\lambda \dots ), it is dark. Together these give the diffraction pattern.
21.

The grating element is key to understanding diffraction orders.

  • a.What is the grating element? How is it related to the number of lines per cm?
  • b.Derive the expression for the angular positions of the maxima in grating diffraction.
  • c.Calculate the number of diffraction orders observable with light of wavelength 500 nm and a grating with 5000 lines/cm.
  • d.Explain the relationship between the angular width of the central maximum and the wavelength of light in single-slit diffraction.
Hint

c. The highest order must have sin⁡θ<1 \sin\theta < 1 . What happens if d/λ d/\lambda comes out a whole number?

Answer
  • a.The grating element is the distance between corresponding points of neighboring slits: the width of one slit plus one ruling, d=a+b d = a + b . If the grating has N N lines per cm, d=1/N d = 1/N cm.
  • b.A plane wavefront falls normally on the grating, so all the slits are sources in phase. The wavelets leaving two neighboring slits at an angle θ \theta differ in path by (a+b)sin⁡θ (a + b)\sin\theta (drop a perpendicular from one slit onto the ray from the next). The same path difference separates every neighboring pair. If (a+b)sin⁡θ=nλ (a + b)\sin\theta = n\lambda , all the wavelets arrive at the focus of the lens in step and add up: a bright principal maximum. So the maxima are at

(a+b)sin⁡θn=nλ,sin⁡θn=Nnλ,n=0,1,2,… (a + b)\sin\theta_n = n\lambda, \qquad \sin\theta_n = Nn\lambda, \qquad n = 0, 1, 2, \dots

  • c.d=10−25000=2.0×10−6 d = \dfrac{10^{-2}}{5000} = 2.0 \times 10^{-6} m. n≤dλ=2.0×10−65.0×10−7=4 n \le \dfrac{d}{\lambda} = \dfrac{2.0 \times 10^{-6}}{5.0 \times 10^{-7}} = 4 . But n=4 n = 4 would need sin⁡θ=1 \sin\theta = 1 , θ=90° \theta = 90° : that light would travel along the surface of the grating and can’t reach a screen. So the orders that can be seen are n=1,2,3 n = 1, 2, 3 : 3 orders on each side of the central line (7 lines in all, counting the central one).
  • d.Angular width =2λ/d = 2\lambda/d : for a given slit it is directly proportional to the wavelength. Red light (about 700 nm) gives a central maximum nearly twice as wide as violet light (about 400 nm) through the same slit. That is why, in white light, the edges of the central maximum are colored, red outermost.
22.
  • a.Explain the pattern observed on the screen in single-slit diffraction, with a diagram.
  • b.Derive the condition for the first minimum in Fraunhofer diffraction.
  • c.Monochromatic light of wavelength 650 nm falls on a single slit of width 0.15 mm. The diffraction pattern is observed on a screen 2 m from the slit. Calculate the angle at which the second diffraction minimum occurs.
Answer
  • a.(Diagram as Figure 12.4, with the pattern of Figure 12.7.) On the screen there is a bright central maximum at O, straight ahead of the slit, where the wavelets from the whole slit arrive in step. On each side of it are dark bands (minima) at sin⁡θ=λ/d,2λ/d,… \sin\theta = \lambda/d, 2\lambda/d, \dots , with fainter bright bands (secondary maxima) between them, at about sin⁡θ=3λ/2d,5λ/2d,… \sin\theta = 3\lambda/2d, 5\lambda/2d, \dots The central maximum is twice as wide as the others, and the secondary maxima get rapidly fainter away from the center.
  • b.Let a plane wavefront fall normally on a slit AB of width d d , and consider the light leaving at θ \theta , focused at P. The path difference between the wavelets from the edges is BE=dsin⁡θ BE = d\sin\theta (AE perpendicular to the rays). Let dsin⁡θ=λ d\sin\theta = \lambda . Divide the slit into two equal halves, AC and CB. A point in AC and the point d/2 d/2 below it in CB differ in path by (d/2)sin⁡θ=λ/2 (d/2)\sin\theta = \lambda/2 , so their wavelets arrive in opposite phase and cancel. Every point in the top half pairs off this way with one in the bottom half, so the whole slit’s light cancels at P: the first minimum is at

dsin⁡θ=λ d\sin\theta = \lambda
c. sin⁡θ2=2λd=2×6.5×10−71.5×10−4=8.67×10−3 \sin\theta_2 = \dfrac{2\lambda}{d} = \dfrac{2 \times 6.5 \times 10^{-7}}{1.5 \times 10^{-4}} = 8.67 \times 10^{-3} , so θ2=8.67×10−3 \theta_2 = 8.67 \times 10^{-3} rad = 0.497°. (The screen distance isn’t needed for the angle.)

23.

A single-slit diffraction pattern is formed on a screen at a distance D D from a slit of width a a , as in Figure 12.4.

  • a.Write the angular condition for minima in single-slit diffraction.
  • b.Derive the expression for the linear position y y of the first minimum.
  • c.If a=0.2 a = 0.2 mm, D=2 D = 2 m and λ=600 \lambda = 600 nm, calculate the distance y y of the first minimum from the central maximum.
Answer
  • a.With the slit width written a a : asin⁡θ=mλ a\sin\theta = m\lambda , m=1,2,3,… m = 1, 2, 3, \dots
  • b.The first minimum (m=1 m = 1 ) is at sin⁡θ=λ/a \sin\theta = \lambda/a . On the screen, a distance y y from the center O, tan⁡θ=y/D \tan\theta = y/D . For the small angles of light through a slit, sin⁡θ≈tan⁡θ≈θ \sin\theta \approx \tan\theta \approx \theta , so

yD=λa⇒y=λDa \frac{y}{D} = \frac{\lambda}{a} \quad\Rightarrow\quad y = \frac{\lambda D}{a}
(and in general, the m m th minimum is at ym=mλD/a y_m = m\lambda D/a ).
c. y=λDa=6.0×10−7×22.0×10−4=6.0×10−3 y = \dfrac{\lambda D}{a} = \dfrac{6.0 \times 10^{-7} \times 2}{2.0 \times 10^{-4}} = 6.0 \times 10^{-3} m = 6 mm.

24.

Diffraction gratings disperse light into its spectral components, using the interference of waves diffracted by many closely spaced slits.

  • a.How does a diffraction grating disperse light into its components?
  • b.Derive the grating equation used to calculate diffraction angles.
  • c.A diffraction grating has 5000 lines per cm. Calculate the angle of the second-order maximum for light of wavelength 500 nm.
Answer
  • a.Each slit diffracts the light, and the light from all the slits interferes. A bright line forms only where neighboring slits’ light differs in path by a whole number of wavelengths, dsin⁡θ=nλ d\sin\theta = n\lambda . For a given order n n , the angle depends on the wavelength: sin⁡θ=nλ/d \sin\theta = n\lambda/d . So each color in white light goes off in its own direction, violet least and red most, and the light is spread into a spectrum in each order.
  • b.As in question 21 b: neighboring slits, a+b a + b apart, send light at θ \theta with path difference (a+b)sin⁡θ (a + b)\sin\theta ; all the slits reinforce when it equals nλ n\lambda : (a+b)sin⁡θn=nλ (a + b)\sin\theta_n = n\lambda .
  • c.d=2.0×10−6 d = 2.0 \times 10^{-6} m. sin⁡θ2=2×5.0×10−72.0×10−6=0.50 \sin\theta_2 = \dfrac{2 \times 5.0 \times 10^{-7}}{2.0 \times 10^{-6}} = 0.50 , so θ2= \theta_2 = 30°.
25.

Diffraction is broadly classified into two types, Fresnel and Fraunhofer, each occurring under specific conditions and producing distinct patterns.

  • a.State the conditions for Fresnel and Fraunhofer diffraction.
  • b.Discuss the differences in the fringe patterns formed.
  • c.In a Fraunhofer diffraction experiment with a single slit, light of wavelength 450 nm produces a central maximum 2 cm wide on a screen 1.5 m from the slit. Calculate the slit width.
Answer
  • a.Fresnel: the source, the screen, or both are at a finite distance from the obstacle or slit, so the wavefront reaching it is curved; no lenses. Fraunhofer: the source and the screen are effectively at infinity, so the wavefront at the slit is plane; in practice, convex lenses make the light parallel and focus it, or a laser and a distant screen are used.
  • b.A Fresnel pattern depends on the distances of the source and screen, and on the object’s exact shape: as the screen moves, the pattern changes form (even the center of a small round obstacle’s shadow can be bright). A Fraunhofer pattern has a fixed form, a bright central band with regularly placed, rapidly fainter bands on each side, and only its size changes with distance. Fraunhofer’s minima and maxima follow simple rules, dsin⁡θ=nλ d\sin\theta = n\lambda , so it is the easier one to measure and calculate.
  • c.Width w=2λDd w = \dfrac{2\lambda D}{d} , so d=2λDw=2×4.5×10−7×1.52.0×10−2=6.75×10−5 d = \dfrac{2\lambda D}{w} = \dfrac{2 \times 4.5 \times 10^{-7} \times 1.5}{2.0 \times 10^{-2}} = 6.75 \times 10^{-5} m = 67.5 µm.
26.

The width of a slit plays a crucial role in shaping the diffraction pattern, influencing how light spreads and forms maxima and minima on a screen.

  • a.How does changing the slit width affect the diffraction pattern?
  • b.Derive the relation between the slit width, the wavelength and the width of the central maximum.
  • c.Light of wavelength 700 nm passes through a slit of width 0.2 mm. Determine the angular width of the central maximum.
Answer
  • a.A narrower slit spreads the light more: the central maximum and all the bands get wider and farther apart (∝1/d \propto 1/d ), and dimmer. A wider slit squeezes the pattern towards the center; when the slit is very wide compared with the wavelength, the pattern is just a sharp image of the slit, with no visible spreading.
  • b.The first minima are at sin⁡θ=λ/d \sin\theta = \lambda/d (d d the slit width). On a screen at distance D D , the first minimum is at x1=Dtan⁡θ≈Dθ≈λD/d x_1 = D\tan\theta \approx D\theta \approx \lambda D/d (small angles). The central maximum stretches from −x1 -x_1 to +x1 +x_1 , so its width is

w=2x1=2λDd w = 2x_1 = \frac{2\lambda D}{d}
and its angular width 2λ/d 2\lambda/d : directly proportional to λ \lambda , inversely to d d .
c. Angular width =2λd=2×7.0×10−72.0×10−4= = \dfrac{2\lambda}{d} = \dfrac{2 \times 7.0 \times 10^{-7}}{2.0 \times 10^{-4}} = 7.0 × 10⁻³ rad, which is 0.40°.

27.

Fraunhofer diffraction through a single slit shows the wave nature of light, making a pattern of bright and dark fringes when light passes through a narrow aperture and is observed at a distance or with a lens.

  • a.Describe the conditions needed to observe Fraunhofer diffraction through a single slit.
  • b.Why is the central maximum wider and brighter than the others?
  • c.Derive the condition for the angular positions of the minima.
  • d.Monochromatic light of wavelength 600 nm falls on a single slit of width 0.15 mm. Calculate the angular position of the first diffraction minimum.
Answer
  • a.A monochromatic source, made into a parallel beam by a convex lens (or a laser); a slit narrow enough to be comparable to the wavelength (a fraction of a millimeter); the light falling normally on the slit; and a second convex lens after the slit with the screen in its focal plane (or a screen far away), so that the light in each direction is brought to one point.
  • b.Brighter: at the center every wavelet from the whole slit arrives in step, while at a secondary maximum all but one part of the slit cancel (only a third, a fifth… of the slit contributes). Wider: the central maximum runs from the first minimum on one side (sin⁡θ=−λ/d \sin\theta = -\lambda/d ) to the first minimum on the other (+λ/d +\lambda/d ), an angular width 2λ/d 2\lambda/d ; each secondary maximum lies between two successive minima, only λ/d \lambda/d apart.
  • c.As in question 15 b: path difference between the edges dsin⁡θ d\sin\theta ; when it is nλ n\lambda , the slit divides into 2n 2n parts that cancel in pairs, so the minima are at dsin⁡θn=nλ d\sin\theta_n = n\lambda , n=1,2,3,… n = 1, 2, 3, \dots
  • d.sin⁡θ1=λd=6.0×10−71.5×10−4=4.0×10−3 \sin\theta_1 = \dfrac{\lambda}{d} = \dfrac{6.0 \times 10^{-7}}{1.5 \times 10^{-4}} = 4.0 \times 10^{-3} , so θ1=4.0×10−3 \theta_1 = 4.0 \times 10^{-3} rad = 0.23°.
28.

In diffraction grating experiments, light is diffracted through thousands of closely spaced slits, producing sharp maxima at certain angles. These patterns are used to calculate wavelengths, analyze spectra and resolve fine details.

  • a.Define “grating element” and its relation to line density.
  • b.Why does increasing the number of lines improve a grating’s resolution?
  • c.Light of wavelength 520 nm falls normally on a grating with 6000 lines/cm.
  • i.Find the grating element.
  • ii.Calculate the maximum order of diffraction that can be observed with this light.
  • iii.Find the angle of diffraction of the second-order maximum.
Answer
  • a.The grating element d=a+b d = a + b is the distance from one slit to the next (one slit plus one ruling). It is the reciprocal of the line density: d=1/N d = 1/N , where N N is the number of lines per unit length.
  • b.The more slits there are, the more completely the light cancels at any angle even slightly away from dsin⁡θ=nλ d\sin\theta = n\lambda : with Ns N_\text{s} slits, each bright line is only about 1/Ns 1/N_\text{s} as wide (in angle) as the gap between orders. Narrower lines mean that two wavelengths very close together make two separate lines instead of one blurred one. The resolving power of a grating is λ/Δλ=nNs \lambda/\Delta\lambda = nN_\text{s} : more lines (or a higher order) separate closer wavelengths, such as the two yellow lines of sodium, 589.0 and 589.6 nm, which need nNs≥1000 nN_\text{s} \ge 1000 .
  • c.i. d=10−26000= d = \dfrac{10^{-2}}{6000} = 1.67 × 10⁻⁶ m.
  • ii.dλ=1.67×10−65.2×10−7=3.2 \dfrac{d}{\lambda} = \dfrac{1.67 \times 10^{-6}}{5.2 \times 10^{-7}} = 3.2 , so the highest observable order is 3.
  • iii.sin⁡θ2=2λd=2×5.2×10−71.67×10−6=0.624 \sin\theta_2 = \dfrac{2\lambda}{d} = \dfrac{2 \times 5.2 \times 10^{-7}}{1.67 \times 10^{-6}} = 0.624 , θ2= \theta_2 = 38.6°.