Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
7 questions
Unit 13 · Polarization
Printable PDFs
- The unit as a book (A5) 16 pages Answers as an A4 booklet, 4 sheets
- Study notes 3 pages
- Worksheet 4 pages Answer key
- Harder practice questions 2 pages Answer key
Answer these questions
Polarization is an important property of light waves: it shows that they are transverse, and has practical uses in optics.
- a.Define polarization of light.
- b.Differentiate between polarized and unpolarized light, with one example of each.
- c.A light ray falls on a glass surface at Brewster’s angle, so the reflected ray is completely polarized and the reflected and refracted rays are at 90°. If the angle of refraction is 33.7°, calculate the refractive index of the glass and the angle of incidence.
Answer
a. Polarization of light is the restricting of its vibrations (of its electric field) to a single direction, at right angles to its direction of travel.
b.
| Unpolarized light | Polarized light | |
|---|---|---|
| Vibrations | in all directions across the ray, at random | in one direction only |
| Turning an analyzer in front of it | brightness doesn’t change | brightness changes, to zero when crossed |
| Example | sunlight, a candle, a bulb | light through a Polaroid; an LCD screen’s light; glare reflected at Brewster’s angle |
c. At Brewster’s angle , so 56.3°.
By Brewster’s law, 1.50.
Polarization of light shows that the direction of light’s vibrations can be controlled, especially by reflection at particular angles.
- a.What is plane-polarized light?
- b.Explain polarization by reflection, with a suitable diagram.
- c.Light falls on a surface so that the angle between the reflected and refracted rays is 90°. If the angle of incidence is 56°, calculate:
- i.the refractive index of the medium,
- ii.the speed of light in that medium (take m/s).
Answer
- a.Light whose vibrations are in one direction only, across the direction of travel (so they all lie in one plane through the ray).
- b.As in section 13.5 and Figure 13.6. Unpolarized light falling on a transparent surface has two equal parts: vibrations perpendicular to the plane of incidence (along the surface) and vibrations in the plane of incidence. The surface reflects the first part more strongly than the second at most angles, so reflected light is partially polarized. At the polarizing angle , where the reflected and refracted rays are at 90°, the part vibrating in the plane of incidence isn’t reflected at all, so the reflected light is completely polarized, vibrating parallel to the surface, and .
- c.The reflected and refracted rays are at 90°, so 56° is the polarizing angle.
- i. 1.48.
- ii. 2.02 × 10⁸ m/s (2.03 × 10⁸ m/s if is rounded to 1.48 first).
Polaroids are optical devices that analyze and control the polarization of light, with important uses in reducing glare and improving contrast.
- a.What are Polaroids?
- b.Mention two practical applications of Polaroids in optics.
- c.Unpolarized light passes through two Polaroid sheets, one after the other.
- i.What happens to the intensity after the first Polaroid? Explain.
- ii.What happens if the second Polaroid’s axis is perpendicular to the first? Why?
- iii.Describe what happens as the second Polaroid is slowly turned from perpendicular to parallel to the first. How does this show polarization?
Answer
- a.Polaroids are thin plastic sheets that make plane-polarized light: a stretched film of polyvinyl alcohol whose long chain molecules are lined up and made conducting with iodine. They absorb the light vibrating along the chains and pass the light vibrating across them.
- b.Any two: polarized sunglasses (cut glare), camera filters (remove reflections), 3D film glasses, LCD screens, polarizing microscopes, stress analysis of plastic models.
- c.i. The intensity falls to half (a little less in a real sheet): the first Polaroid passes only the part of each vibration along its axis, and the average of over all directions is . The light that comes out is plane-polarized along its axis.
- ii.No light gets through: the light from the first sheet vibrates along its axis, which is at 90° to the second sheet’s axis, and .
- iii.The light gets brighter gradually, following Malus’s law (where is the angle between the axes), from zero when crossed to the full , half the original, when parallel. Unpolarized light through a single turning sheet doesn’t change in brightness, so the change shows that the light leaving the first sheet has a direction of vibration across the ray: it is polarized, and light is a transverse wave.
When light is reflected at a particular angle, known as Brewster’s angle, the reflected beam is completely polarized. This has important uses in optics.
- a.State Brewster’s law and derive it.
- b.Using a diagram, explain why light reflected at Brewster’s angle is completely polarized.
- c.State two practical uses of polarization in everyday life or technology.
Answer
- a.Brewster’s law: the refractive index of a medium equals the tangent of its polarizing angle, . Derivation as in section 13.5: by Snell’s law ; at the polarizing angle the reflected and refracted rays are at 90°, so and ; hence .
- b.Diagram as Figure 13.6. The reflected light is sent out by the electrons in the medium, which the refracted light sets vibrating. The part of the refracted light vibrating in the plane of incidence makes electrons vibrate at right angles to the refracted ray, which at Brewster’s angle is along the reflected ray. An oscillating electron sends out no light along its own direction of vibration, so that part isn’t reflected. Only the part vibrating perpendicular to the plane of incidence (along the surface) is reflected, so the reflected light vibrates in one direction only: completely polarized.
- c.Any two: polarized sunglasses cutting glare from water and roads; camera polarizing filters; LCD screens; 3D films; Brewster windows in lasers; stress analysis.
Figure 13.11 shows light reflected and refracted at the boundary between a denser and a rarer medium.
- a.Define Brewster’s angle and state its significance.
- b.Using the figure, explain why reflected light is completely polarized at Brewster’s angle.
- c.If the refractive index of the denser medium is 1.5, calculate Brewster’s angle.
- d.Unpolarized light falls on a glass slab so that the reflected light is completely polarized. If the refractive index of the glass is 1.66, calculate:
- i.Brewster’s angle,
- ii.the angle between the reflected and refracted rays,
- iii.the speed of light in the glass.
Answer
- a.Brewster’s angle (the polarizing angle) is the angle of incidence at which light reflected from a transparent surface is completely plane-polarized. Its significance: at this angle the reflected and refracted rays are at 90°, and , so it gives a way to make polarized light by reflection, to cut glare, to build loss-free laser windows, and to measure refractive index.
- b.In the figure, the reflected ray is at 90° to the refracted ray. The refracted light’s vibrations in the plane of incidence would make the medium’s electrons send light out along their own direction of vibration, which is the reflected ray’s direction, and an oscillating electron sends no light that way. So only the vibrations perpendicular to the plane of incidence (the dots) are reflected, and the reflected light is completely polarized.
- c. 56.3°.
- d.i. 58.9°.
- ii.90°.
- iii. 1.81 × 10⁸ m/s.
A ray of light passes from a denser medium into a rarer medium, falling at an angle of incidence . The reflected and refracted rays are at 90° to each other (Figure 13.12). The angles of reflection and refraction are and .
- a.Find the critical angle of the denser medium.
- b.Define plane-polarized light and differentiate it from unpolarized light.
- c.Explain, using the vibrations of the electromagnetic wave, why the reflected light is completely polarized.
Hint
a. With the reflected and refracted rays at 90°, is the polarizing angle for light going from the denser medium into the rarer one. What is the refractive index of the rarer medium relative to the denser one?
Answer
a. Let the refractive index of the denser medium relative to the rarer one be . Going from the denser into the rarer medium, the refractive index of the second relative to the first is , and is the polarizing angle, so by Brewster’s law
(Check: , and gives , so Snell’s law gives the same.) The critical angle of the denser medium has . So
For glass of , and .
- b.Plane-polarized light vibrates in one direction only across the ray; unpolarized light vibrates in all directions across the ray at random. A turning analyzer changes the brightness of plane-polarized light (down to zero when crossed) but not of unpolarized light.
- c.Light is an electromagnetic wave whose electric field vibrates across the ray. The reflected light is sent out by the electrons of the medium, set vibrating by the electric field of the light. Split the incident light into the part vibrating perpendicular to the plane of incidence and the part vibrating in it. The second part makes the electrons vibrate at right angles to the refracted ray, which, since the refracted and reflected rays are at 90°, is along the reflected ray. Vibrating charges send out no electromagnetic waves along their own line of vibration, so this part isn’t reflected. The reflected light is only the part vibrating perpendicular to the plane of incidence: completely plane-polarized.
Certain anisotropic materials, such as calcite, show double refraction, splitting a beam of light into two rays; this shows that light waves are transverse.
- a.Explain polarization of light and its importance in wave optics.
- b.State and explain Brewster’s law.
- c.Describe a simple experiment that shows the transverse nature of light.
- d.What are Polaroids, and how are they used to make polarized light?
- e.Unpolarized light falls on a transparent surface at the polarizing angle. If the refractive index of the material is 1.5, calculate the polarizing angle.
Answer
- a.Polarization is the restricting of light’s vibrations to one direction across the ray. It matters in wave optics because only transverse waves can be polarized: it settles that light is a transverse wave (interference and diffraction alone show only that it is a wave). It also explains how double refraction and optical activity work, and gives tools such as polarizing filters and microscopes.
- b.Brewster’s law: , where is the angle of incidence at which the reflected light is completely polarized. At that angle the reflected and refracted rays are at 90°; Snell’s law with gives .
- c.Two tourmaline crystals or two Polaroids. Look at a lamp through both. Keep the first fixed and turn the second about the line of sight. The light is brightest when their axes are parallel and disappears when they are crossed at 90°, then returns. If light were longitudinal, turning the second filter about the ray could make no difference; the change shows the vibrations are across the ray, so light is transverse.
- d.Polaroids are thin plastic sheets of stretched polyvinyl alcohol with iodine, whose long, lined-up, conducting chain molecules absorb the part of the light vibrating along them. Unpolarized light passing through a Polaroid comes out plane-polarized, vibrating across the chains (along the transmission axis), at a little under half its intensity.
- e. 56.3°.
