Skip to content

← Grade 12 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

15 questions

Unit 11 · Interference of Light

Answer these questions

11.

The interference of light depends on the coherent nature of the sources and on the path differences traveled by the light waves.

  • a.What are coherent sources of light? Why are they necessary for observing interference?
  • b.Define the term “path difference” in the context of the interference of light.
  • c.Explain how constructive and destructive interference occur, in terms of path difference.
Answer
  • a.Coherent sources are sources that give out light of the same frequency (wavelength) with a constant phase difference between them. They are necessary because the positions of the bright and dark places depend on the phase difference: if it is constant, the pattern stays still and can be seen; if it changes at random, as between two independent lamps, the bright and dark places move about millions of times a second, and the eye sees only an even glow.
  • b.The path difference at a point is the difference between the distances that the two waves have traveled from their (in-phase) sources to that point, Δx=S2P−S1P \Delta x = S_2P - S_1P (measured as optical paths, μd, if the light passes through different media). It sets the phase difference: φ=(2π/λ)Δx \varphi = (2\pi/\lambda)\Delta x .
  • c.If the path difference is a whole number of wavelengths, Δx=nλ \Delta x = n\lambda , the waves arrive in phase, crest with crest: their amplitudes add, constructive interference, a bright point. If it is an odd number of half wavelengths, Δx=(2n+1)λ/2 \Delta x = (2n+1)\lambda/2 , they arrive in antiphase, crest with trough: their amplitudes subtract, destructive interference, a dark point (completely dark for equal amplitudes).
12.

The principle of superposition explains how waves combine to produce interference patterns.

  • a.State the principle of superposition of waves.
  • b.i. What are the conditions for sustained interference?
  • ii.What happens when the path difference is λ/2?
Answer
  • a.When two or more waves pass through the same point of a medium at the same time, the resultant displacement at that point at any instant is the (vector) sum of the displacements that the individual waves would produce there.
  • b.i. The sources must be coherent: the same frequency (monochromatic light) and a constant phase difference, which in practice means both derived from one source; the amplitudes should be equal or nearly so; the source should be narrow; the path difference must be less than the coherence length; the two waves must have the same polarization; the slits should be narrow and close together and the screen far away; and the setup must be steady.
  • ii.A path difference of λ/2 means a phase difference of π: the waves arrive in antiphase, crest on trough, and cancel. There is destructive interference, a dark point (completely dark if the amplitudes are equal).
13.

Sustained interference is a key idea in wave optics: it explains the stable, visible patterns formed when waves combine.

  • a.What do you mean by sustained interference? State the necessary conditions for it.
  • b.i. Two coherent sources produce an interference pattern. Why is a screen necessary to observe it?
  • ii.State one limitation of observing interference using two independent light sources.
Answer
  • a.Sustained interference is an interference pattern whose bright and dark fringes stay in fixed positions for as long as it is watched, so that it can be seen and measured. Conditions: the two sources must be coherent (the same frequency and a constant phase difference, usually from one source); monochromatic light; amplitudes equal or nearly equal; a narrow source; the path difference within the coherence length; the same polarization; the slits narrow and close together and the screen far away; a steady setup.
  • b.i. Interference happens throughout the space where the two beams overlap, but light passing through air is invisible: you see light only when it enters your eye. The screen scatters light from each point towards the eye, so each point looks as bright as the light arriving there, and the fringes become visible. (You could also look into the beams through a lens, which is how a traveling microscope views them.)
  • ii.Two independent sources are not coherent: their phase difference changes at random many millions of times a second, so the fringes move as fast, and no stable pattern is seen, only uniform illumination.
14.

The interference of light makes bright and dark fringes, by the superposition of waves from coherent sources.

  • a.Define constructive and destructive interference.
  • b.Explain why two independent bulbs are not coherent sources.
  • c.Two slits are separated by 0.5 mm, and a screen is placed 2 m away. If the wavelength of the light used is 600 nm, calculate the fringe width.
Answer
  • a.Constructive interference is the reinforcement of two waves that meet in phase (path difference nλ n\lambda , phase difference 2nπ 2n\pi ), giving a resultant amplitude equal to the sum of their amplitudes, a bright point. Destructive interference is the cancellation of two waves that meet in antiphase (path difference (2n+1)λ/2 (2n+1)\lambda/2 , phase difference (2n+1)π (2n+1)\pi ), giving a resultant equal to the difference of their amplitudes, a dark point.
  • b.In a bulb, light is given out by countless atoms independently, each in a short burst of waves lasting a few nanoseconds or less, with a random phase, and over a range of frequencies. The phase difference between the light from two separate bulbs therefore changes at random, very rapidly, and is never constant, so they are not coherent, and their fringes, if any, shift too fast to be seen.
  • c.d=0.5 d = 0.5 mm =5.0×10−4 = 5.0 \times 10^{-4} m, D=2 D = 2 m, λ=600 \lambda = 600 nm =6.0×10−7 = 6.0 \times 10^{-7} m.

β=λDd=6.0×10−7×25.0×10−4=2.4×10−3 m=2.4 mm \beta = \frac{\lambda D}{d} = \frac{6.0 \times 10^{-7} \times 2}{5.0 \times 10^{-4}} = 2.4 \times 10^{-3}\ \text{m} = \textbf{2.4 mm}

15.

Young’s double slit experiment demonstrates the interference of light waves, and helps us understand how the bright and dark fringes form on a screen.

  • i.Complete the diagram, and write the condition for constructive interference.
  • ii.What is the condition for destructive interference?
  • iii.Obtain an expression for the fringe width. Does the central fringe in this setup lie upwards or downwards on the screen?
lampsingle slitdouble slitscreen
Figure 11.11 For question 15: a lamp, a single slit, a double slit and a screen.
Hint

iii. Where on the screen is a point equally far from both slits?

Answer
  • i.The completed diagram is Figure 11.7: wavefronts from the lamp pass through the single slit and reach the two slits together; from each slit, waves spread out and overlap on the screen, with bright and dark fringes marked on it. Constructive interference (a bright fringe) where the path difference is a whole number of wavelengths, S2P−S1P=nλ S_2P - S_1P = n\lambda (phase difference 2nπ 2n\pi ), n = 0, 1, 2, ….
  • ii.Destructive interference (a dark fringe) where the path difference is an odd number of half wavelengths, S2P−S1P=(2n+1)λ/2 S_2P - S_1P = (2n+1)\lambda/2 (phase difference (2n+1)π (2n+1)\pi ).
  • iii.With the geometry of Figure 11.9, the path difference at a point P a distance x from the center is dsin⁡θ≈xd/D d\sin\theta \approx xd/D . Bright fringes are at xn=nλD/d x_n = n\lambda D/d , so the distance between neighboring bright fringes is

β=xn+1−xn=λDd \beta = x_{n+1} - x_n = \frac{\lambda D}{d}
(the same between dark fringes). The central fringe is where the path difference is zero: at the point of the screen equally far from both slits, on the line through the middle of the two slits, perpendicular to them. Here the single slit is on that line too, so the central fringe lies neither up nor down, but straight opposite the middle of the double slit, at the center of the pattern. (If the single slit were moved up, the light would reach S₁ first; the central fringe would then move down, to where the extra path from S₂ to the screen makes up for it.)

16.

The interference of light is a fundamental effect that shows the wave nature of light, as observed clearly in Young’s double slit experiment (YDSE).

  • a.What is the interference of light?
  • b.What are coherent sources? Give one example.
  • c.State the principle of Young’s double slit experiment. Mention the conditions for obtaining a clear interference pattern.
  • d.What happens to the interference pattern in YDSE when:
  • i.the distance between the slits is increased;
  • ii.the screen is moved farther from the slits;
  • iii.the whole setup is immersed in water?

Give reasons for each case.
e. Derive the expression for the fringe width in YDSE. Discuss how it is affected by changing the wavelength and the slit separation.

Answer
  • a.The interference of light is the change in brightness, from bright to dark, produced where two or more coherent light waves overlap, because their displacements add (superposition): bright where they arrive in phase, dark where they arrive in antiphase.
  • b.Coherent sources emit light of the same frequency with a constant phase difference. Example: the two slits of Young’s experiment lit by one narrow source (or a laser beam divided in two).
  • c.One wavefront from a narrow source is divided at two narrow slits close together, which therefore act as two coherent sources in phase. Their light overlaps on a screen, and at each point the waves reinforce or cancel according to their path difference, making evenly spaced bright and dark fringes. Conditions for a clear pattern: monochromatic light; a narrow source slit; the two slits narrow, close together and equally lit; the screen far away; a path difference within the coherence length; a dark room and a steady setup.
  • d.i. The fringes become narrower (closer together), since β=λD/d∝1/d \beta = \lambda D/d \propto 1/d ; with a large d they become too close to see.
  • ii.The fringes become wider, β∝D \beta \propto D , and the pattern dimmer, since the same light is spread over a larger area.
  • iii.The fringes become narrower, by the factor μ = 1.33: in water the wavelength is λ/μ \lambda/\mu (the frequency is unchanged and the speed is c/μ c/\mu ), so β′=λD/μd=β/μ \beta' = \lambda D/\mu d = \beta/\mu , about three quarters of the width in air.
  • e.For a point P on the screen at a distance x from the center, the path difference is S2P−S1P=dsin⁡θ≈dtan⁡θ=xd/D S_2P - S_1P = d\sin\theta \approx d\tan\theta = xd/D (θ is small). For a bright fringe xd/D=nλ xd/D = n\lambda , so xn=nλD/d x_n = n\lambda D/d , and the fringe width is

β=xn+1−xn=λDd \beta = x_{n+1} - x_n = \frac{\lambda D}{d}
It is proportional to the wavelength (red light gives wider fringes than blue) and inversely proportional to the slit separation (slits closer together give wider fringes).

17.

Path difference and coherence are crucial ideas that decide whether an interference pattern forms, and whether it is stable.

  • a.What is meant by path difference in wave interference?
  • b.Define optical path. How is it different from geometrical path?
  • c.State the conditions required for sustained interference. Why are temporal and spatial coherence necessary?
  • d.Explain what happens to the interference pattern in the following situations. Give reasons.
  • i.The two interfering waves differ slightly in frequency.
  • ii.One of the coherent sources becomes slightly brighter than the other.
  • e.Two coherent sources produce an interference pattern in air. Derive an expression for the positions of the bright fringes on the screen, in terms of the path difference and the wavelength. Explain what changes if the experiment is done in glass instead of air.
Hint

d. i. A phase difference that grows steadily with time: what does that do to the fringes?

Answer
  • a.The path difference is the difference between the distances traveled by the two waves from their sources to the point where they meet. It decides their phase difference there, φ=(2π/λ)Δx \varphi = (2\pi/\lambda)\Delta x , and so whether they reinforce or cancel.
  • b.The optical path is the distance light would travel in a vacuum in the time it takes to travel a given path in a medium: s=μd s = \mu d , where d is the geometrical path (the actual distance) and μ the medium’s refractive index. They are equal in a vacuum (and nearly so in air); in a medium the optical path is longer, since the light is slower there and the path holds more wavelengths. Phase differences depend on optical paths.
  • c.Conditions: coherent sources (the same frequency, a constant phase difference), monochromatic light, nearly equal amplitudes, a narrow source, the path difference within the coherence length, the same polarization, the slits close together with the screen far away, a steady setup. Temporal coherence is needed because each source gives wave trains of limited length: if the path difference is longer than a train (the coherence length), the two parts meeting come from different, unrelated trains, their phase difference changes at random, and the fringes vanish. Spatial coherence is needed because a wide source is many sources side by side, each giving a pattern slightly shifted; together they blur the fringes away, so the light at the two slits must come from a narrow source, effectively one point.
  • d.i. If the frequencies differ slightly, the phase difference between the waves changes steadily with time, by 2π every 1/(f1−f2) 1/(f_1 - f_2) seconds. The fringes therefore drift across the screen continuously, one fringe each such period; unless that is very slow, they move too fast to be seen, and the pattern disappears into an even glow (like beats in sound, which you hear as a throbbing).
  • ii.The fringes stay in the same places, with the same width, but the contrast falls: the bright fringes have amplitude a1+a2 a_1 + a_2 and the dark ones a1−a2 a_1 - a_2 , no longer zero, so the dark fringes are not completely dark. The fringe visibility (Imax−Imin)/(Imax+Imin) (I_{max} - I_{min})/(I_{max} + I_{min}) drops below 1.
  • e.For a point P at a distance x from the center of the screen, the path difference is Δx=S2P−S1P=dsin⁡θ≈xd/D \Delta x = S_2P - S_1P = d\sin\theta \approx xd/D . A bright fringe forms where Δx=nλ \Delta x = n\lambda : xd/D=nλ xd/D = n\lambda , so xn=nλD/d x_n = n\lambda D/d . In glass (refractive index μ) the wavelength becomes λ/μ \lambda/\mu , or equivalently the optical path difference becomes μ Δx \mu\,\Delta x ; so the bright fringes are at xn=nλD/μd x_n = n\lambda D/\mu d , all closer to the center, and the fringe width falls to β/μ \beta/\mu (by a third for μ = 1.5).
18.

Fringe visibility and coherence are key factors in how clear and stable an interference pattern is, especially in Young’s double slit experiment (YDSE).

  • a.What is meant by fringe visibility?
  • b.State the condition for the appearance of dark fringes in an interference pattern.
  • c.Why is monochromatic light essential for a clear and steady interference pattern? What would happen if white light were used?
  • d.In Young’s double slit experiment, why is a single slit placed before the double slit? Explain its role in maintaining coherence.
  • e.In a Young’s double slit experiment, the distance between the slits is 0.3 mm and the distance from the slits to the screen is 1.2 m. The wavelength of the light used is 480 nm.
  • i.Calculate the fringe width.
  • ii.How far is the fourth bright fringe from the central maximum?
Answer
  • a.Fringe visibility (contrast) measures how clearly the bright fringes stand out from the dark ones: V=Imax−IminImax+Imin V = \dfrac{I_{max} - I_{min}}{I_{max} + I_{min}} . It is 1 for perfect fringes with completely dark minima, and 0 when there are no fringes.
  • b.A dark fringe appears where the path difference is an odd number of half wavelengths, Δx=(2n+1)λ/2 \Delta x = (2n+1)\lambda/2 , that is a phase difference of (2n+1)π (2n+1)\pi ; it is completely dark when the two waves have equal amplitudes.
  • c.The fringe width depends on the wavelength. With one wavelength, every fringe has the same width, and many sharp fringes are seen. With white light, each color makes fringes of its own width; they coincide only at the center, which is white, and on each side are a few colored fringes (blue inside, red outside), after which the colors overlap and the screen looks evenly whitish: only a few fringes are seen. (White light also has a very short coherence length, so the path difference must be nearly zero.)
  • d.The single slit makes a narrow source, so that the light reaching both slits comes from practically one point and its wavefront reaches S₁ and S₂ with a fixed phase difference (zero, if they are equally far from it). Light from a wide source arrives at the slits from many points, each with its own phase difference, giving many shifted patterns that blur together. So the single slit gives the spatial coherence that makes S₁ and S₂ coherent.
  • e.d=0.3 d = 0.3 mm =3.0×10−4 = 3.0 \times 10^{-4} m, D=1.2 D = 1.2 m, λ=480 \lambda = 480 nm =4.8×10−7 = 4.8 \times 10^{-7} m.
  • i.β=λDd=4.8×10−7×1.23.0×10−4=1.92×10−3 \beta = \dfrac{\lambda D}{d} = \dfrac{4.8 \times 10^{-7} \times 1.2}{3.0 \times 10^{-4}} = 1.92 \times 10^{-3} m = 1.92 mm.
  • ii.x4=4β=4×1.92= x_4 = 4\beta = 4 \times 1.92 = 7.68 mm.
19.

In the double slit experiment, a monochromatic light source is used to produce an interference pattern on a screen.

  • a.Derive the expression for the fringe separation (β) in terms of the wavelength (λ) of the light, the distance (d) between the slits, and the distance (D) between the slits and the screen.
  • b.Explain how the bright and dark fringes form. How does the pattern change when the distance between the slits is increased, or the wavelength of the light is changed?
  • c.What happens to the interference pattern if the monochromatic light is replaced by white light? Explain the change in the pattern and what it means.
  • d.Discuss the conditions required for a clear interference pattern in the double slit experiment.
SS₁S₂POscreen
Figure 11.12 For question 19: a source S, its wavefronts reaching the slits S₁ and S₂, and the paths from the two slits to a point on the screen.
Answer

a. Let P be a point on the screen at a distance x from the center O, making an angle θ with the central line at the slits. The path difference is S2P−S1P=dsin⁡θ S_2P - S_1P = d\sin\theta ; for a small angle, sin⁡θ≈tan⁡θ=x/D \sin\theta \approx \tan\theta = x/D , so the path difference is xd/D xd/D . Bright fringes are where it equals nλ n\lambda : xn=nλD/d x_n = n\lambda D/d . The separation of neighboring bright fringes is
β=xn+1−xn=(n+1)λDd−nλDd=λDd \beta = x_{n+1} - x_n = \frac{(n+1)\lambda D}{d} - \frac{n\lambda D}{d} = \frac{\lambda D}{d}
(and the same for dark fringes, at (2n+1)λD/2d (2n+1)\lambda D/2d ).

  • b.The waves from S₁ and S₂ overlap on the screen. Where their path difference is a whole number of wavelengths they arrive in phase and reinforce: bright fringes. Where it is an odd number of half wavelengths they arrive in antiphase and cancel: dark fringes. Since the path difference grows steadily with x, bright and dark fringes alternate at equal spacing. Increasing d makes the fringes narrower (β∝1/d \beta \propto 1/d ); a longer wavelength makes them wider and a shorter one narrower (β∝λ \beta \propto \lambda ).
  • c.With white light, every color makes its own fringes, of width proportional to its wavelength. At the center all the colors are bright together, so the central fringe is white. Beside it are a few colored fringes, each blue-violet on its inner edge and red on its outer edge, because blue’s fringes are narrower; farther out the colors overlap and the screen is evenly whitish, so only a few fringes are seen. It means the fringe positions depend on the wavelength, which is why the experiment can measure wavelengths, and why the white central fringe can be used to find the point of zero path difference.
  • d.The two sources must be coherent (from one narrow source slit, or a laser); the light monochromatic; the two slits narrow, close together and equally bright; the screen far away compared with d; the path difference within the coherence length; the room dark and the setup steady.
20.

The figure shows a setup of Young’s double slit experiment.

  • a.Write the condition for constructive interference, and explain its significance.
  • b.Derive the expression for the fringe width Δy on the screen, in terms of the slit separation d, the distance x to the screen, and the wavelength λ.
  • c.If d = 0.5 mm, x = 1.5 m and λ = 600 nm, calculate the fringe width Δy.
screenθxyΔy = xλ/dd
Figure 11.13 For question 20: two slits a distance d apart, a screen at a distance x, and a point on it at a height y, seen from the slits at an angle θ.
Answer
  • a.The path difference between the waves from the two slits must be a whole number of wavelengths, dsin⁡θ=nλ d\sin\theta = n\lambda (n = 0, 1, 2, …), so that they arrive in phase. It gives the directions, and so the positions on the screen, of the bright fringes: light is concentrated there, and missing from the dark fringes between.
  • b.A point on the screen at a height y above the center is seen from the slits at an angle θ with tan⁡θ=y/x \tan\theta = y/x . The path difference is dsin⁡θ≈dtan⁡θ=dy/x d\sin\theta \approx d\tan\theta = dy/x for a small θ. Bright fringes are where dy/x=nλ dy/x = n\lambda , so yn=nλx/d y_n = n\lambda x/d . The fringe width is

Δy=yn+1−yn=xλd \Delta y = y_{n+1} - y_n = \frac{x\lambda}{d}
c. Δy=xλd=1.5×6.0×10−75.0×10−4=1.8×10−3 \Delta y = \dfrac{x\lambda}{d} = \dfrac{1.5 \times 6.0 \times 10^{-7}}{5.0 \times 10^{-4}} = 1.8 \times 10^{-3} m = 1.8 mm.

21.

The double slit experiment is fundamental to understanding interference patterns, in which the fringe width depends on the wavelength, the slit separation and the screen distance.

  • a.Derive an expression for the fringe width (β) in the double slit interference pattern. How is the fringe width related to the wavelength of the light, the distance between the slits, and the distance from the slits to the screen?
  • b.In a double slit experiment, monochromatic light of wavelength 600 nm falls on two slits 0.5 mm apart. The screen is 2 m from the slits. Calculate the fringe width (β).
  • c.What happens to the interference pattern if the distance between the slits is doubled, keeping the wavelength and the screen distance the same? Explain your answer.
  • d.Describe the conditions under which constructive and destructive interference occur in the double slit experiment. How do they lead to the bright and dark fringes?
Answer
  • a.For a point at a distance x from the center of the screen, the path difference is dsin⁡θ≈xd/D d\sin\theta \approx xd/D . Bright fringes satisfy xd/D=nλ xd/D = n\lambda , so xn=nλD/d x_n = n\lambda D/d , and β=xn+1−xn=λD/d \beta = x_{n+1} - x_n = \lambda D/d . The fringe width is directly proportional to the wavelength (β ∝ λ) and to the screen distance (β ∝ D), and inversely proportional to the slit separation (β ∝ 1/d).
  • b.β=λDd=6.0×10−7×25.0×10−4=2.4×10−3 \beta = \dfrac{\lambda D}{d} = \dfrac{6.0 \times 10^{-7} \times 2}{5.0 \times 10^{-4}} = 2.4 \times 10^{-3} m = 2.4 mm.
  • c.The fringe width halves, to 1.2 mm, since β ∝ 1/d: the fringes come twice as close together (twice as many in the same width), and the central fringe stays at the center.
  • d.Constructive interference where the path difference is nλ n\lambda (phase difference 2nπ 2n\pi ): the waves arrive in phase and reinforce, giving bright fringes at x=nλD/d x = n\lambda D/d . Destructive interference where it is (2n+1)λ/2 (2n+1)\lambda/2 (phase difference (2n+1)π (2n+1)\pi ): the waves arrive in antiphase and cancel, giving dark fringes at x=(2n+1)λD/2d x = (2n+1)\lambda D/2d . As x increases the path difference increases steadily, so bright and dark fringes alternate, evenly spaced.
22.

Interference of light is a fundamental wave effect, which forms alternate bright and dark bands by superposition.

  • a.Explain the interference of light. Discuss the conditions needed to observe interference, and distinguish between constructive and destructive interference.
  • b.Monochromatic light of wavelength 500 nm passes through a double slit. The distance between the slits is 0.2 mm, and the screen is 1.5 m from the slits. Calculate the fringe separation (β) on the screen.
  • c.If the wavelength of the light is changed to 600 nm, how does the fringe separation change? Explain the effect of the wavelength on the fringe width.
Answer

a. When two coherent light waves overlap, their displacements add (superposition). Where they arrive in phase, the light is brighter; where in antiphase, darker or dark: this redistribution of light into bright and dark bands is interference. Conditions: coherent sources (the same frequency and a constant phase difference), monochromatic light, nearly equal amplitudes, a narrow source, the path difference within the coherence length, the same polarization, the sources close together and the screen far away.

Constructive Destructive
Path difference nλ n\lambda (2n+1)λ/2 (2n+1)\lambda/2
Phase difference 2nπ 2n\pi (2n+1)π (2n+1)\pi
Waves meet crest on crest crest on trough
Resultant amplitude a1+a2 a_1 + a_2 a1−a2 a_1 - a_2
Result bright fringe dark fringe
  • b.β=λDd=5.0×10−7×1.52.0×10−4=3.75×10−3 \beta = \dfrac{\lambda D}{d} = \dfrac{5.0 \times 10^{-7} \times 1.5}{2.0 \times 10^{-4}} = 3.75 \times 10^{-3} m = 3.75 mm.
  • c.β=6.0×10−7×1.52.0×10−4=4.5×10−3 \beta = \dfrac{6.0 \times 10^{-7} \times 1.5}{2.0 \times 10^{-4}} = 4.5 \times 10^{-3} m = 4.5 mm: the fringe separation increases by the same factor as the wavelength, 6/5. Since β ∝ λ, longer wavelengths (toward red) give wider fringes and shorter ones (toward violet) narrower fringes.
23.

The fringe width in the double slit experiment measures the spacing between successive bright or dark bands, and gives an insight into the wave nature of light.

  • a.Explain the idea of fringe width in a double slit experiment. Derive the expression for the fringe width, and discuss the factors that affect it.
  • b.In a double slit experiment, monochromatic light of wavelength 700 nm passes through slits 0.25 mm apart. The screen is 2 m away. Calculate the distance between the third bright fringe and the central maximum.
  • c.If the wavelength of the light is changed to 800 nm, calculate the new position of the third bright fringe. How does changing the wavelength affect the positions of the fringes?
Answer
  • a.The fringe width β is the distance between the centers of two neighboring bright (or dark) fringes; all fringes have the same width, so the positions of the bright fringes are simply 0, β, 2β, …. Derivation: at a point x from the center, the path difference is dsin⁡θ≈xd/D d\sin\theta \approx xd/D ; bright fringes at xd/D=nλ xd/D = n\lambda , xn=nλD/d x_n = n\lambda D/d , so β=xn+1−xn=λD/d \beta = x_{n+1} - x_n = \lambda D/d . It increases with the wavelength and the screen distance, and decreases as the slit separation increases; in a medium of refractive index μ it is β/μ \beta/\mu .
  • b.x3=3λDd=3×7.0×10−7×22.5×10−4=1.68×10−2 x_3 = \dfrac{3\lambda D}{d} = \dfrac{3 \times 7.0 \times 10^{-7} \times 2}{2.5 \times 10^{-4}} = 1.68 \times 10^{-2} m = 16.8 mm.
  • c.x3=3×8.0×10−7×22.5×10−4=1.92×10−2 x_3 = \dfrac{3 \times 8.0 \times 10^{-7} \times 2}{2.5 \times 10^{-4}} = 1.92 \times 10^{-2} m = 19.2 mm. Every fringe’s distance from the center is proportional to the wavelength, so with a longer wavelength all the fringes move outwards, away from the central maximum (which stays at the center), and spread farther apart.
24.

The interference of light shows its wave nature, by producing alternate bright and dark fringes by the superposition of coherent waves.

  • a.Define interference. Discuss the conditions needed to observe it, and explain the difference between constructive and destructive interference.
  • b.How would the interference pattern change if the distance between the slits were halved, keeping the wavelength and screen distance the same? Explain the effect of the slit separation on the pattern.
  • c.Monochromatic light of wavelength 450 nm is used in a double slit experiment. The distance between the slits is 0.1 mm, and the screen is 3 m from the slits. Calculate the distance between the first and second dark fringes.
Answer
  • a.Interference is the redistribution of light energy, into bright and dark places, where two or more coherent waves overlap and add by superposition. Conditions: coherent sources, monochromatic light, nearly equal amplitudes, a narrow source, a path difference within the coherence length, the same polarization, close slits and a distant screen. In constructive interference the waves meet in phase (path difference nλ) and reinforce, giving bright fringes; in destructive interference they meet in antiphase (path difference (2n+1)λ/2) and cancel, giving dark fringes.
  • b.The fringe width doubles, since β=λD/d∝1/d \beta = \lambda D/d \propto 1/d : the fringes spread twice as far apart, so fewer fit on the screen, and with the slits closer together the central part of the pattern looks larger and easier to measure.
  • c.Neighboring dark fringes are one fringe width apart:

β=λDd=4.5×10−7×31.0×10−4=1.35×10−2 m=13.5 mm \beta = \frac{\lambda D}{d} = \frac{4.5 \times 10^{-7} \times 3}{1.0 \times 10^{-4}} = 1.35 \times 10^{-2}\ \text{m} = \textbf{13.5 mm}
(The first dark fringe is at β/2=6.75 \beta/2 = 6.75 mm from the center and the second at 3β/2=20.25 3\beta/2 = 20.25 mm.)

25.

A microwave source T is directed towards a metal plate with two narrow slits S₁ and S₂. A receiver is slowly moved along the line PO, as shown in the figure. The wavelength of the microwaves is 2.8 cm, the separation of the slits is 4.0 cm, and the receiver’s line is 80 cm from the slits.

  • a.Calculate the separation between adjacent maxima.
  • b.What is the phase difference between the two waves at P, if P is the first maximum beside O?
  • c.Why are well-defined interference patterns harder to observe when the slits are far apart, or when the source is not coherent? Explain.

The textbook gives the wavelength as 2.8 nm and the slits 4 mm apart, with the answer 5.6 × 10⁻⁷ m. But 2.8 nm is an X-ray, not a microwave (microwaves are about 1 mm to 1 m long), and half a micrometer is a spacing no receiver could be moved through. The book’s numbers don’t work, so here the wavelength is 2.8 cm, that of the microwave kits used in school labs, and the slits 4.0 cm apart.

TS₁S₂PO80 cm
Figure 11.14 For question 25: the microwave transmitter T, the metal plate with two slits S₁ and S₂, and the receiver at O, moved along the line OP.
Hint

a. Here λ is not small compared with d: find the angle of the first maximum from dsin⁡θ=λ d\sin\theta = \lambda without the small-angle approximation.

Answer

a. λ=2.8 \lambda = 2.8 cm, d=4.0 d = 4.0 cm, D=0.80 D = 0.80 m. The first maximum is where dsin⁡θ=λ d\sin\theta = \lambda :
sin⁡θ1=λd=2.84.0=0.70,θ1=44.4∘ \sin\theta_1 = \frac{\lambda}{d} = \frac{2.8}{4.0} = 0.70, \qquad \theta_1 = 44.4^\circ
This angle is far from small, so β=λD/d \beta = \lambda D/d (which would give 0.56 m) can’t be used. On the receiver’s line,
y1=Dtan⁡θ1=0.80×tan⁡44.4∘=0.80×0.980=0.78 m y_1 = D\tan\theta_1 = 0.80 \times \tan 44.4^\circ = 0.80 \times 0.980 = 0.78\ \text{m}
The second maximum would need sin⁡θ=2λ/d=1.4 \sin\theta = 2\lambda/d = 1.4 , which is impossible, so there are only three maxima, at O and 0.78 m on either side. The separation between adjacent maxima is 0.78 m. (The receiver is twenty slit separations away, far enough for the path difference to be dsin⁡θ d\sin\theta : worked out exactly from the two distances, the first maximum is also 0.78 m from O.)

  • b.At the first maximum the path difference is one wavelength, so the phase difference is (2π/λ)×λ= (2\pi/\lambda) \times \lambda = 2π (360°): the waves arrive in phase. (At the nth maximum it would be 2nπ.)
  • c.When the slits are far apart, the fringe width λD/d \lambda D/d is very small, so the maxima are packed so closely that the receiver (or the eye) can’t separate them, and the pattern looks uniform. A wide d also makes the pattern more sensitive to the width of the source (spatial coherence). When the source is not coherent, the phase difference between the waves at the two slits changes at random, so the maxima and minima move about continuously and average out: no steady pattern is seen.