Skip to content

← Electricity and Magnetism

Electric Field

Unit 20 · CDC textbook pages 387–402

Hide the stories, facts, photos, activities and interactives, for revising before an exam
In this unit 10 sections
  1. 20.1 Introduction
  2. 20.2 Electric field lines
  3. 20.3 Electric field strength
  4. 20.4 The field between the plates is uniform
  5. 20.5 Electric flux
  6. 20.6 Gauss’s law
  7. 20.7 Gauss’s law for a point charge
  8. 20.8 Gauss’s law: a uniformly charged sphere
  9. 20.9 Gauss’s law for an infinite line of charge
  10. Exercise

Rub a balloon on your hair and hold it a few centimeters above some torn paper. The paper jumps up to it, though nothing touches it. Before the jump, was anything different in the space between the balloon and the paper? Physics answers yes: the balloon has filled the space round it with an electric field, and the paper is pushed by the field where it sits.

That idea, a field filling space, is one of the most useful in all of physics. This unit describes the electric field with pictures (field lines) and with numbers (the field strength), uses it to steer beams of electrons, and ends with Gauss’s law, a single statement from which the field of a charged sphere, a charged wire or a charged sheet follows in a few lines. Unit 19 gave the force between two charges, and a first look at E=F/q E = F/q ; Unit 21 adds the energy.

A painted portrait of Carl Friedrich Gauss as an old man, with white hair, a dark velvet cap and a dark coat
Figure 20.1 Carl Friedrich Gauss (1777–1855), painted in 1840 by Christian Albrecht Jensen. Photo: Christian Albrecht Jensen, Public domain

20.1 Introduction

In physics, a field is a region in which an object feels a force without being touched. An electric (or electrostatic) field is made by charged objects, and any other charged object in it feels a force.

You can make an electric field easily by rubbing a glass rod with a silk cloth. The rubbing transfers electrons from the glass to the silk, leaving the cloth negative and the rod positive. The rod is now surrounded by an electric field: it will attract small pieces of paper, or bend a thin stream of water from a tap.

Nature makes its own electric fields. The strong field between the base of a thundercloud and the ground helps to open the path along which the current of a lightning flash flows.

What you need from Unit 19:

  1. Electric charge Q Q is measured in coulombs (C), and can be positive or negative.
  2. Opposite charges attract each other; like charges repel.
  3. A charged object placed in an electric field feels a force.
  4. A uniformly charged sphere acts, outside it, as if all its charge were at its center.
  5. Just like gravitational fields, electric fields can be drawn as field lines.

20.2 Electric field lines

Sometimes it is obvious where a force comes from: a brake pad rubbing on a bicycle wheel’s rim slows it down. In other cases there is no contact at all, yet there is a force: two magnets push each other apart, two charged objects attract. Such forces are said to act at a distance.

The word field is used for the space round an object in which it exerts such a force. When a comb picks up paper, we say the paper is sitting in the comb’s electric field. The idea is powerful because so much is common to all fields, electric, magnetic and gravitational: what you learn here you will use again.

Any two charged objects exert equal and opposite forces on each other without touching. We say an electric field surrounds each charge. To explore a field, imagine a small positive test charge: small enough not to disturb the charges that make the field. Wherever you put it, it feels a force in a definite direction. An electric field line (or line of force) is a line drawn so that at every point on it, its direction (its tangent) is the direction of the force on a positive test charge placed there.

The idea of field lines was introduced by Michael Faraday in the 1830s. The lines are imaginary, but they make a field’s shape easy to see and to reason about. They are drawn by a few rules:

  • Lines start on positive charges and end on negative charges (or go off to, or come in from, far away).
  • Each line carries an arrow showing the direction of the force on a positive charge: away from positive charges, towards negative ones.
  • Where the field is strong, the lines are close together; where it is weak, they are far apart. The lines behave as if they pushed each other apart sideways.
  • The lines never cross: at a crossing point a test charge would be pushed two ways at once, but the field at a point has only one direction.
  • The lines meet the surface of a conductor at 90°. (If a line met it at a slant, the field would have a part along the surface, and the conductor’s free charges would move until that part was gone.)

Field patterns

Figure 20.2 A charged sphere: the lines run straight out from it, like spokes, as from a point charge at its center.
+−
Figure 20.3 A positive and a negative charge: every line from the + ends on the −. A pair of equal and opposite charges is called a dipole.
++E = 0
Figure 20.4 Two equal positive charges: the lines bend away from each other. Midway between them is a neutral point, where the two fields cancel.
−−−−−−−−−metal sheet+
Figure 20.5 A positive charge near a flat metal sheet: the lines curve round to meet the metal at right angles, ending on negative charges that the charge has drawn to the sheet’s surface by induction.
+−+−+−+−+−+−+−
Figure 20.6 Two long parallel plates with opposite charges, in cross-section: between them the lines are straight, parallel and evenly spaced (a uniform field); at the ends they bow outwards.

The field patterns above are all traced from Coulomb’s law, line by line. Between two parallel plates the field is uniform (the same strength and direction everywhere) in the region between them, and weaker towards their edges. At the edges the lines curve outwards, as the field weakens from its large value between the plates to the much weaker field well away from them: these are called edge effects.

Try it

Explore a field with a test charge

+−drag the yellow test charge
Charges:
Field strength at the test charge
2,096 N/C
Force on a +1 nC test charge
2.1 µN

The lines start on the + charge and end on the − charge. A + test charge is pushed along them; a − one would be pulled the other way.

Radial fields

The field between two plates is uniform. What shape of field does a small “point” charge, such as a single proton, make? An isolated positive charge makes the field of Figure 20.2: the lines go straight out from it in every direction, so it is called a radial field. The lines spread out in three dimensions from the charge, like the spines of a hedgehog; the drawing shows only a flat slice through it. For a negative charge, the arrows point inwards.

The equipotential surfaces round a point charge (Unit 21) are spheres centered on it, drawn as circles in a slice.

A charged sphere, or even a roughly round charged head, also makes a radial field, as the hair in the photo shows.

A smiling girl with both hands on the metal dome of a Van de Graaff generator, her hair standing straight out from her head
Figure 20.7 At Science City in Kolkata, a girl touches the dome of a Van de Graaff generator, a machine that builds up a large charge. The charge spreads over her too; each hair, charged alike, is pushed away from her head and from the others, and points along the radial field. Photo: Biswarup Ganguly, CC BY 3.0

Which is NOT a rule for drawing electric field lines?

Pick an answer to see why.

20.3 Electric field strength

The electric field strength E E at a point in a field is the force per unit charge on a small positive test charge placed at that point.

Imagine an isolated charge Q Q in space, and a point P a distance r r from it. Put a small positive test charge q q at P and measure the force F F on it. Then

E=Fq E = \frac{F}{q}

(a)30 cmE = 3.0 × 10⁵ N/CP−Q = −3.0 × 10⁻⁶ C(b)E = 3.0 × 10⁵ N/CP+Q = +3.0 × 10⁻⁶ C
Figure 20.8 The field at a point P, 30 cm from a point charge: towards a negative charge (a), away from a positive one (b).
  • The SI unit of E E is the newton per coulomb, N/C. The volt per meter, V/m, means the same thing (20.4 and Unit 21 show why).
  • E E is a vector, in the direction of the force on a positive test charge: dividing a vector by a positive number q q only scales it up or down. The force on a negative charge points the other way, against the field.
  • The test charge must be small, so that it doesn’t push the charges making the field out of place. E E then doesn’t depend on q q : double the test charge and the force doubles too.

Once E E at a point is known, the force on any charge q q put there is

F=qE F = qE

Derivation: the field of a point charge

  1. By Coulomb’s law, the force on the test charge q q a distance r r from Q Q is

F=14πε0 Qqr2 F = \frac{1}{4\pi\varepsilon_0}\,\frac{Qq}{r^2}
2. The field strength is the force per unit charge:

E=Fq=14πε0 Qqr2×1q E = \frac{F}{q} = \frac{1}{4\pi\varepsilon_0}\,\frac{Qq}{r^2}\times\frac{1}{q}
3. The test charge cancels:

E=14πε0 Qr2=kQr2 \boxed{E = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{r^2} = \frac{kQ}{r^2}}

The field depends only on the charge that makes it and the distance, not on the test charge. Measuring r r from the charge out to the point, a positive E E (from a positive Q Q ) points outwards, away from the charge, which is what we expect when both it and the test charge are positive. When Q Q is negative, E E points towards Q Q . The lines of a point charge radiate straight out (positive) or in (negative): a radial field.

The field falls off as 1/r2 1/r^2 : twice as far, a quarter as strong.

01,0002,0003,0004,0000.00.10.20.30.4r (m)E (N/C)
Figure 20.9 The field strength of a 1.0 nC point charge against distance, drawn from E=kQ/r2 E = kQ/r^2 . Halving the distance from 0.2 m to 0.1 m makes the field four times as strong.

A charge of +2.0 µC placed at a point feels a force of 0.040 N to the east. A charge of −4.0 µC placed at the same point instead would feel:

Pick an answer to see why.

The field between two parallel plates

Join two flat metal plates, facing each other, to the terminals of a battery. One plate becomes positive, the other negative, and between them is the field of Figure 20.6, drawn again with its battery below. The field lines are parallel to each other, at right angles to the plates, run from the positive plate to the negative, and are evenly spaced: the field is uniform.

+−+−+−+−+−+−+−QF = QEdV+E
Figure 20.10 Two parallel plates d apart, joined to a battery of p.d. V. The field between them is uniform, so a charge Q feels the same force F = QE wherever it is between them.

20.4 The field between the plates is uniform

“Uniform” means the field strength has the same size and direction everywhere between the plates (away from their edges). Its size can be found from the potential difference V V between the plates and their separation d d :

E=Vd \boxed{E = \frac{V}{d}}

Derivation: E=V/d E = V/d

Consider a small positive charge Q Q between the plates (Figure 20.10).

  1. The force on it is F=QE F = QE , where E E is the field strength between the plates. It is the same everywhere between them, because the field is uniform.
  2. If the charge moves from the positive plate to the negative plate, a distance d d along the force, the work done on it by the field is force × distance moved:

W=Fd=QEd W = Fd = QEd
3. By definition, the potential difference between the plates is the work done per unit charge when a charge moves from one plate to the other:

V=WQ=QEdQ=Ed V = \frac{W}{Q} = \frac{QEd}{Q} = Ed
4. Rearranging V=Ed V = Ed :

E=Vd E = \frac{V}{d}

This is why the volt per meter is a unit of field strength: 1 V/m = 1 (J/C)/m = 1 N m/(C m) = 1 N/C.

Charges moving along the field

A charge q q of mass m m let go from rest at one plate is pushed straight across by the constant force qE qE : it speeds up with constant acceleration a=qE/m a = qE/m , just as a stone dropped in uniform gravity does. By the time it reaches the other plate the field has done work qEd=qV qEd = qV on it, so its kinetic energy is

12mv2=qV \tfrac12 mv^2 = qV

This is how every electron gun works, from an old TV’s picture tube to an X-ray machine in a hospital: electrons boiled off a hot wire are accelerated through a p.d. of thousands of volts. Unit 21 takes it further.

Deflecting a beam of charged particles

A beam of charged particles fired across the field between two plates is bent sideways. By changing the p.d. between the plates, you control how much.

Try it

Steering an electron beam

+−screenelectronsplates 5.0 cm long, 2.0 cm apart
Field E
5,000 V/m
Time between the plates
2.50 ns
Deflection at the plates’ end
2.7 mm

On a screen 10 cm past the plates the spot moves 13.7 mm from the middle. The screen is drawn nearer, so the beam fits.

The field points down, from the + plate to the −, so the force on the negative electrons is up. Between the plates they curve along a parabola; past the plates no force acts, and they go straight on.

Suppose a beam of identical positively charged particles enters the field between plates A (positive) and B (negative), moving parallel to the plates. They are deflected towards the negative plate B; negatively charged particles would be deflected towards the positive plate. The field is uniform, so the force on each particle is constant in size and direction, and the beam curves along a parabola, exactly as a ball thrown horizontally does under gravity (Unit 3). On a screen past the plates, the beam’s path can be seen and measured.

If the p.d. between the plates is VP V_P and their separation is d d , the field is E=VP/d E = V_P/d , and the force on each particle of charge q q is

F=qE=qVPd F = qE = \frac{qV_P}{d}

Derivation: the path is a parabola

Take the particle entering the field at the origin with speed v v , parallel to the plates, x x along the plates and y y across them, towards the plate it is pushed to. Let each plate be L L long.

  1. Across the plates the force is constant, so the acceleration is constant:

a=Fm=qEm=qVPmd a = \frac{F}{m} = \frac{qE}{m} = \frac{qV_P}{md}
where m m is the particle’s mass.
2. Along the plates there is no force, so the particle keeps its speed v v (its starting velocity is the whole of the horizontal part). After a time t t :

x=vt(i) x = vt \quad\text{(i)}
3. Across the plates it starts with no velocity, so after the time t t :

y=12at2=12 qEm t2(ii) y = \tfrac12 at^2 = \tfrac12\,\frac{qE}{m}\,t^2 \quad\text{(ii)}
4. Eliminate t t : from (i), t=x/v t = x/v . Put it into (ii):

y=qE2mv2 x2 \boxed{y = \frac{qE}{2mv^2}\,x^2}
This is y=(constant)×x2 y = (\text{constant})\times x^2 : the path is a parabola.
5. The particle is between the plates for a time t=L/v t = L/v , so it leaves them deflected by

y=qE2mv2 L2=qVPL22mdv2 y = \frac{qE}{2mv^2}\,L^2 = \frac{qV_P L^2}{2mdv^2}
The deflection is directly proportional to the plate p.d. VP V_P : double the p.d., double the deflection. That is what makes the deflecting plates a measuring instrument, as in the cathode ray oscilloscope.

For an electron, q=e q = e and m=me m = m_e :

y=eE2mev2 x2 y = \frac{eE}{2m_ev^2}\,x^2

Past the plates there is no force, and the particle goes straight on along the tangent to the parabola where it left.

A beam of protons and a beam of electrons enter the same field between two plates, both with the same speed, moving parallel to the plates. Compared with the electrons, the protons are deflected:

Pick an answer to see why.

20.5 Electric flux

Field lines have so far been a picture. Now we count them. Consider a field that is uniform in size and direction, and a flat surface of area A A at right angles to it (Figure 20.11a).

(a)(b)EEAΦ = EAθnormalAA⊥Φ = EA cos θ
Figure 20.11 A flat surface of area A in a uniform field, seen edge on. (a) At right angles to the field: Φ = EA. (b) Tilted, its normal at θ to the field: the lines through it are those through its projection A⊥ = A cos θ, so Φ = EA cos θ.

The number of lines through each square meter (the line density) is drawn in proportion to the field strength. So the total number of lines through the surface is proportional to E×A E \times A . This product of the field strength and the area at right angles to the field is called the electric flux, Φ \Phi (the capital Greek letter phi):

Φ=EA \Phi = EA

From the units of E E and A A , flux is measured in newton meters squared per coulomb, N m²/C. Electric flux is a measure of the number of field lines passing through a surface.

If the surface is not at right angles to the field, fewer lines pass through it. Let the normal to the surface (the line at right angles to it) make an angle θ \theta with the field (Figure 20.11b). The lines that pass through A A are exactly those that pass through A⊥ A_\perp , the projection of A A on a plane at right angles to the field. From the drawing,

A⊥=Acos⁡θ A_\perp = A\cos\theta

so the flux through the tilted surface is

Φ=EA⊥=EAcos⁡θ \boxed{\Phi = EA_\perp = EA\cos\theta}

  • The flux through a surface of fixed area is greatest, EA EA , when the surface is at right angles to the field (its normal along the field, θ=0° \theta = 0° ).
  • The flux is zero when the surface lies along the field (its normal at right angles to the field, θ=90° \theta = 90° ): the lines skim past without crossing it.

For a closed surface (one with an inside and an outside, such as a box or a ball), the normal is taken pointing outwards: flux out of the surface counts as positive, flux into it as negative.

A flat sheet of area 0.20 m² is in a uniform field of 500 N/C. Its normal makes 60° with the field. The flux through it is:

Pick an answer to see why.

20.6 Gauss’s law

Gauss’s law comes from the inverse square nature of the force between point charges. It follows from Coulomb’s law, yet it is often far more convenient: it gives the field of highly symmetrical arrangements of charge in a few lines, and it lets you reason about difficult problems without any calculation.

To see where it comes from, imagine a box made of a material that has no effect on electric fields.

(a)empty(b)+lines out(c)−lines in
Figure 20.13 Three imaginary boxes: (a) empty; (b) a positive charge inside; (c) a negative charge inside.
  • With the box empty (a), a positive test charge brought close to any face of it feels no force.
  • With a positive charge inside (b), the test charge feels an outward force near every face. Put twice as much charge inside, and the outward force near every face doubles.
  • With a negative charge inside (c), the test charge feels an inward force near every face; doubling the charge doubles it.

Thinking of the field lines as water, they seem to flow out of a box containing positive charge and into a box containing negative charge, in proportion to the charge.

Now put an empty box in a uniform field.

side 1side 2E
Figure 20.14 An empty box in a uniform field: every line that enters through side 1 leaves through side 2.

Near side 1 a positive test charge is pushed inwards; near side 2, outwards. The field is parallel to the other four sides, so near them there is no push in or out. In the water picture, as much flows in as flows out: the net flow is zero. Whenever there is charge in the box, there is a net flow of field lines out of it or into it; with no charge inside, the net flow is zero, however the field outside is shaped.

These observations, with flux as the measure of the “flow” of field lines, lead to Gauss’s law:

Φ=qε0 \boxed{\Phi = \frac{q}{\varepsilon_0}}

where Φ \Phi is the total (net) electric flux out of a closed surface, and q q is the net charge inside it. The closed surface, called a Gaussian surface, can be a box like ours or any closed shape at all. It is imaginary: you choose it, usually with the same symmetry as the charges, so that the field has the same size all over it.

In words: the total electric flux through any closed surface equals the net charge inside the surface divided by ε0 \varepsilon_0 .

  • Charges outside the surface add nothing to the total: each of their lines that enters the surface also leaves it.
  • Only the net charge counts: +3 µC and −3 µC inside give zero total flux, though there is a field.
  • The size and shape of the surface don’t matter, only what it encloses.

Gauss’s law is one of the four fundamental equations (Maxwell’s equations) that govern electric and magnetic fields throughout the universe. Whether you travel into a star in a distant galaxy, down among the strands of a DNA molecule, or into the microprocessor of your phone, the flux of the electric field through any closed surface depends only on the charge it encloses. In nearly 200 years of experiments, no electric field has ever been found that breaks Gauss’s law.

A closed surface encloses charges of +5 nC, −2 nC and +1 nC, and a charge of +10 nC lies just outside it. The total flux through the surface is:

Pick an answer to see why.

20.7 Gauss’s law for a point charge

Check the law on the simplest case: a point charge q q , surrounded by a sphere of radius r r centered on it.

+rqGaussian surface
Figure 20.15 A point charge q at the center of a spherical Gaussian surface of radius r. The field crosses the surface at right angles everywhere, with the same strength.
  1. On the sphere, the field has the same size everywhere, since every point of it is the same distance r r from the charge:

E=14πε0 qr2 E = \frac{1}{4\pi\varepsilon_0}\,\frac{q}{r^2}

  • 2.The field points straight out, so it is at right angles to the surface (along its normal) at every point: cos⁡θ=1 \cos\theta = 1 .
  • 3.So the flux is just E E times the whole area of the sphere, A=4πr2 A = 4\pi r^2 :

Φ=EA=14πε0 qr2×4πr2=qε0 \Phi = EA = \frac{1}{4\pi\varepsilon_0}\,\frac{q}{r^2}\times4\pi r^2 = \frac{q}{\varepsilon_0}

The flux doesn’t depend on the radius r r : a bigger sphere has a weaker field on it, 1/r2 1/r^2 , but a larger area, r2 r^2 , and the two cancel exactly. That is why Gauss’s law works for every surface: it is the inverse square law in disguise. It is also why Coulomb’s constant is written with a 4π 4\pi : the area of a sphere.

The argument also runs backwards. Start from Gauss’s law and the symmetry (a point charge has no favorite direction, so its field must point straight out and have the same size all over the sphere): then E×4πr2=q/ε0 E\times4\pi r^2 = q/\varepsilon_0 , which is Coulomb’s law. Gauss’s law and Coulomb’s law say the same thing.

20.8 Gauss’s law: a uniformly charged sphere

An insulating solid sphere of radius a a carries a total positive charge Q Q , spread evenly through its volume, with a volume charge density ρ \rho (charge per unit volume).

(a)rar > a(b)rar < a
Figure 20.16 A uniformly charged insulating sphere of radius a, and a spherical Gaussian surface of radius r: (a) outside the sphere; (b) inside it.

The charge has spherical symmetry, so the field must point straight out from the center and have the same size at every point at the same distance r r from it. So choose spherical Gaussian surfaces centered on the sphere: on each, E E is the same everywhere and at right angles to the surface, and the flux is simply E×4πr2 E \times 4\pi r^2 .

The field at a point outside the sphere (r>a r > a )

  1. The Gaussian surface of radius r r (Figure 20.16a) encloses all the charge, Q Q .
  2. By Gauss’s law, Φ=EA=Qε0 \Phi = EA = \dfrac{Q}{\varepsilon_0} , with A=4πr2 A = 4\pi r^2 .
  3. So E×4πr2=Qε0 E\times4\pi r^2 = \dfrac{Q}{\varepsilon_0} , and

E=14πε0 Qr2(r>a) \boxed{E = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{r^2}} \quad (r > a)

Outside it, the field of a uniformly charged sphere is exactly that of a point charge Q Q at its center. This is the proof promised in Unit 19, and it holds for gravity too: it is why a planet pulls as if all its mass were at its center (Unit 7).

The field at a point inside the sphere (r<a r < a )

  1. Now the Gaussian surface of radius r<a r < a (Figure 20.16b) encloses only part of the charge. The volume inside it is V′=43πr3 V' = \tfrac43\pi r^3 , so the charge inside is

qin=ρV′=ρ×43πr3 q_{in} = \rho V' = \rho\times\tfrac43\pi r^3

  • 2.By Gauss’s law, E×4πr2=qinε0=ρ×43πr3ε0 E\times4\pi r^2 = \dfrac{q_{in}}{\varepsilon_0} = \dfrac{\rho\times\tfrac43\pi r^3}{\varepsilon_0}
  • 3.Dividing by 4πr2 4\pi r^2 :

E=ρ3ε0 r E = \frac{\rho}{3\varepsilon_0}\,r
4. The whole sphere, of volume 43πa3 \tfrac43\pi a^3 , holds Q Q , so ρ=Q43πa3 \rho = \dfrac{Q}{\tfrac43\pi a^3} . Putting it in:

E=14πε0 Qa3 r(r<a) \boxed{E = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{a^3}\,r} \quad (r < a)

Inside, the field grows in proportion to r r : it is zero at the center (where the pushes of the charge all round cancel) and grows steadily outwards, because the charge enclosed (∝r3 \propto r^3 ) grows faster than the area (∝r2 \propto r^2 ).

The field at the surface (r=a r = a )

Both formulas give the same value at r=a r = a :

E=14πε0 Qa3 a=14πε0 Qa2 E = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{a^3}\,a = \frac{1}{4\pi\varepsilon_0}\,\frac{Q}{a^2}

The field is greatest at the surface and the graph has no jump there.

0E₀0a2a3a4arEinsideoutside
Figure 20.17 The field of a uniformly charged insulating sphere: a straight line from zero at the center to its greatest value E₀ at the surface, then falling as 1/r².

20.9 Gauss’s law for an infinite line of charge

A very long, straight, thin wire carries charge spread evenly along it, λ \lambda coulombs per meter (the linear charge density).

Erlline charge λ
Figure 20.18 A long line of charge with a coaxial cylindrical Gaussian surface of radius r and length l. The field points straight out from the line, through the curved side only.
  1. Symmetry. The line is infinitely long and the same all along, so the field is the same at all points the same distance from it, whatever their height along the line. And it can only point straight out from the line, at right angles to it.
  2. Choose the Gaussian surface: a cylinder of radius r r and length l l , with the line along its axis.
  3. The ends: the field runs along them, parallel to their surfaces, so the flux through both ends is zero.
  4. The curved side: the field is at right angles to it and the same size all over it. Its area is A=2πrl A = 2\pi rl , so the flux is E×2πrl E\times2\pi rl .
  5. The charge enclosed is the charge on length l l of the line: qin=λl q_{in} = \lambda l .
  6. Gauss’s law:

E (2πrl)=λlε0 E\,(2\pi rl) = \frac{\lambda l}{\varepsilon_0}
7. The length l l cancels (as it must: we chose it):

E=λ2πε0r \boxed{E = \frac{\lambda}{2\pi\varepsilon_0 r}}

The field of a line falls off as 1/r 1/r , not 1/r2 1/r^2 : its lines spread out in only two directions, round the line, instead of three. (It holds for a real wire at distances much smaller than its length, away from its ends.)

An infinite sheet of charge

The same reasoning gives the field of a large flat sheet with charge spread evenly over it, σ \sigma coulombs per square meter (the surface charge density).

sheet, σEEend, area Aend, area A
Figure 20.19 A large sheet of charge with a short cylindrical Gaussian surface (a “pillbox”) through it. The field points straight away from both faces of the sheet, through the two ends only.
  1. Symmetry. A positive sheet has no reason to push one way along itself rather than another, so the field points straight away from it, at right angles, on both sides, with the same size at the same distance on either side.
  2. Choose the Gaussian surface: a short cylinder through the sheet, its two flat ends (each of area A A ) parallel to the sheet, one on each side.
  3. The curved side: the field runs along it, so no flux.
  4. The two ends: the field crosses each at right angles, outwards: flux EA EA through each, 2EA 2EA in all.
  5. The charge enclosed: the patch of sheet inside the cylinder, qin=σA q_{in} = \sigma A .
  6. Gauss’s law: 2EA=σAε0 2EA = \dfrac{\sigma A}{\varepsilon_0} , so

E=σ2ε0 \boxed{E = \frac{\sigma}{2\varepsilon_0}}

The field doesn’t depend on the distance from the sheet at all: a large flat sheet makes a uniform field. Two parallel plates with opposite charges +σ +\sigma and −σ -\sigma add their fields between them (each σ/2ε0 \sigma/2\varepsilon_0 , both pointing from + to −) and cancel outside, so between the plates

E=σε0 E = \frac{\sigma}{\varepsilon_0}

uniform, as in 20.4: Gauss’s law explains why the field between parallel plates is uniform.

At 10 cm from a long charged wire the field is 6.0 × 10⁴ N/C. At 30 cm from it, the field is:

Pick an answer to see why.

Exercise

Choose the correct option

ABCDelectron beamfield E, downwards
Figure 20.20 For question 1: an electron beam and four possible paths through a field pointing down.
  1. Which path in Figure 20.20 shows a possible movement of an electron in the electric field shown?

Pick an answer to see why.

  1. Which describes the electric field pattern of an isolated negative point charge?

Pick an answer to see why.

  1. Which one of the following correctly describes the electric field strength?

Pick an answer to see why.

  1. The electric field between two charged plates is 650 N/C. If the distance between the plates is 12 cm, what should be the potential difference between them?

Pick an answer to see why.

  1. Two horizontal conducting plates are 5 cm apart. The upper plate is at +10 V and the lower plate at 0 V. Which describes the electric field between the plates?

Pick an answer to see why.

Answer these questions

6.

The figure shows the electric field pattern drawn by a student for two oppositely charged plates set at right angles. State two errors the student has made.

−−−−+++field line
Figure 20.21 The student’s drawing.
Hint
Answer
7.

At a distance r r from the center of a radioactive nucleus, the electric field strength is E E . The figure shows a graph of E E against 1/r2 1/r^2 .

0.00.51.0024681/r² (10²⁷ m⁻²)E (10²¹ N/C)
Figure 20.22 The field strength E near the nucleus against 1/r².
  • i.Find the gradient of the graph, and from it the charge on the nucleus.
  • ii.The nucleus emits an alpha particle. State the change, if any, to the graph for the resulting (daughter) nucleus. Explain your answer.
Hint
Answer

Numerical problems

8.

A negatively charged droplet of oil is held stationary between two horizontal plates, 2.10 cm apart, with a potential difference of 1.50 kV between them. The droplet is spherical, with a radius of 1.27 × 10⁻⁶ m, and the density of the oil is 950 kg/m³. Two forces act on it: its weight, and the electric force.

+−+−+−+−+−electric forceweight2.10 cm+1.50 kV
Figure 20.24 The oil drop between the plates, and the two forces on it.
  • i.Show that the size of the charge on the droplet is about 1.1 × 10⁻¹⁸ C. (g = 9.8 m/s²)
  • ii.Calculate the number of electrons that make up this charge.
Hint
Answer

A companion to your textbook, not a replacement for it: study from the book your school uses, and where the two differ, follow your teacher. Found a mistake? Please tell us.