Smell a fish that has been left out too long, and you are smelling an amine: trimethylamine. Squeeze lemon over the fish and the smell fades, because the acid turns the amine into a salt that can’t evaporate. The same nitrogen-containing group runs through your own body: in every amino acid of every protein, in the bases that spell out your DNA, in adrenaline when you are frightened and in serotonin and dopamine in your brain. Caffeine in your tea and nicotine in a cigarette are amines too.
Chemically, all of them are relatives of one small, smelly molecule, ammonia, NH₃. Replace one, two or three of its hydrogens by carbon groups and you have an amine. This unit is about what that replacement does: how amines are named, made and separated, why they are bases and why aniline is so much weaker a base than the rest, and how aniline, through a cold and careful reaction called diazotization, became the parent of the synthetic dye industry.
Introduction
| Substance | Amine group in it | Where you meet it |
|---|---|---|
| Amino acids | –NH₂ (in proteins, –NH–) | every protein in your food and body; plants keep stores of them, called “pools”, in the cytoplasm, mitochondria and chloroplasts |
| DNA and RNA bases | –NH₂ and ring nitrogens | the genetic code |
| Adrenaline, dopamine, serotonin | –NH– or –NH₂ | messengers in the body and brain |
| Caffeine, nicotine, morphine | ring nitrogens | tea and coffee, tobacco, painkillers (these plant amines are called alkaloids) |
| Trimethylamine, putrescine, cadaverine | –N(CH₃)₂, –NH₂ | the smell of rotting fish and decaying flesh |
| Aniline | –NH₂ on a benzene ring | dyes, foam for mattresses, rubber, medicines |
Amines are organic compounds derived from ammonia by replacing one or more of its hydrogen atoms with alkyl or aryl groups. Seen the other way, a primary amine is the amino derivative of a hydrocarbon: an alkane or arene with one hydrogen replaced by –NH₂. Amines are:
- aliphatic, when every group on the nitrogen is an alkyl group: CH₃NH₂, (C₂H₅)₂NH;
- aromatic, when the nitrogen is bonded directly to a benzene ring: aniline, C₆H₅NH₂. (C₆H₅CH₂NH₂, with a CH₂ between the ring and the nitrogen, behaves as an aliphatic amine.)
A. Aliphatic amines
16.1 Nomenclature, classification and isomerism of amines
Classification
Amines are classified by how many of ammonia’s hydrogens have been replaced (Figure 16.2):
- primary (1°): one hydrogen replaced, R–NH₂; the functional group is the amino group, –NH₂;
- secondary (2°): two replaced, R₂NH; the group is the imino group, >NH;
- tertiary (3°): all three replaced, R₃N; the group is the tertiary nitrogen, >N–.
A tertiary amine still has a lone pair, so it can take a fourth alkyl group from an alkyl halide. The product is a quaternary ammonium salt, R₄N⁺X⁻, with four groups on a positive nitrogen and no lone pair (Figure 16.3). It is an ionic salt, not an amine.
Nomenclature
Common names name the alkyl groups on the nitrogen in alphabetical order and add amine, written as one word: methylamine, ethylmethylamine, trimethylamine.
IUPAC names treat the amine as the parent alkane with the ending -e changed to -amine, with a number for the carbon holding the nitrogen where needed:
position number + alkane name, its -e changed to -amine: propan-2-amine
| S.N. | Formula | IUPAC name | Common name |
|---|---|---|---|
| 1. | CH₃–NH₂ | methanamine | methylamine |
| 2. | CH₃–CH₂–NH₂ | ethanamine | ethylamine |
| 3. | CH₃–CH₂–CH₂–NH₂ | propan-1-amine | propylamine |
| 4. | CH₃–CH(NH₂)–CH₃ | propan-2-amine | isopropylamine |
| 5. | (CH₃)₃C–NH₂ | 2-methylpropan-2-amine | tert-butylamine |
Compound 5 has a three-carbon chain with a methyl and the amino group both on carbon 2: 2-methylpropan-2-amine, commonly tert-butylamine. The prefix amino- is used instead of the ending only when a group of higher priority takes the suffix, as in 2-aminoethanoic acid (glycine).
For secondary and tertiary amines, the largest alkyl group gives the parent name; the others are named as prefixes with N- to show they sit on the nitrogen, not on a carbon (Figure 16.5): CH₃CH₂–NH–CH₃ is N-methylethanamine; (CH₃)₂N–CH₂CH₃ is N,N-dimethylethanamine.
Isomerism of aliphatic amines
Amines show four kinds of structural isomerism:
- Chain isomerism: butan-1-amine and 2-methylpropan-1-amine.
- Position isomerism: propan-1-amine and propan-2-amine.
- Functional isomerism: 1°, 2° and 3° amines of the same formula, such as propan-1-amine, N-methylethanamine and N,N-dimethylmethanamine.
- Metamerism: amines of the same class with different alkyl groups on the nitrogen, such as N-ethylethanamine and N-methylpropan-1-amine.
Which of these is a secondary amine?
Pick an answer to see why.
16.2 Separation of 1°, 2° and 3° amines: Hofmann’s method
When an alkyl halide reacts with ammonia, the product is usually a mixture of primary, secondary and tertiary amines (Section 16.3). Their boiling points are close, so they are hard to separate by distillation alone. The German chemist August Wilhelm von Hofmann found a way: treat the mixture with diethyl oxalate, (COOC₂H₅)₂. Each amine reacts according to how many hydrogens its nitrogen has.
- A primary amine has two N–H hydrogens. Two molecules of it replace both ethoxy groups of diethyl oxalate, giving a solid, a dialkyloxamide (Figure 16.12).
- A secondary amine has only one N–H. It replaces only one ethoxy group, giving a liquid, a dialkyloxamic ester (Figure 16.13).
- A tertiary amine has no N–H, so it doesn’t react.
Then the three are taken apart (Figure 16.14):
- The solid oxamide is filtered off.
- The filtrate is fractionally distilled. The unchanged tertiary amine, with the lowest boiling point, distills first; the oxamic ester is left behind.
- The oxamide is boiled with potassium hydroxide, which gives back the primary amine; it distills off (Figure 16.15).
- The oxamic ester is boiled with potassium hydroxide, which gives back the secondary amine (Figure 16.16).
16.3 Preparation of primary amines
a. From haloalkanes (ammonolysis)
A haloalkane heated with alcoholic ammonia in a sealed tube gives a primary amine. The lone pair of ammonia attacks the carbon and pushes out the halide (a nucleophilic substitution, as in Haloalkanes):
The difficulty is that the product, ethanamine, is itself a base with a lone pair, and a better nucleophile than ammonia. It attacks the haloalkane too, giving a secondary amine, which attacks again, giving a tertiary amine and finally a quaternary salt:
So the reaction gives a mixture. Using a large excess of ammonia makes it far more likely that each haloalkane molecule meets ammonia rather than an amine, and the primary amine is then the main product; using excess haloalkane gives mainly the quaternary salt. (Mixing the two in a 1 : 1 ratio gives a mixture of all four.) The mixture is separated by Hofmann’s method, above.
b. By reduction of nitriles
A nitrile (alkyl cyanide) takes four hydrogen atoms across its C≡N triple bond and becomes a primary amine with the same number of carbons:
The [H] comes from sodium and ethanol (the Mendius reduction), from LiAlH₄ in dry ether, or from H₂ over nickel. Since a nitrile is made from a haloalkane and KCN, this route makes an amine with one carbon more than the haloalkane: CH₃Br → CH₃CN → CH₃CH₂NH₂.
c. From amides
i. Hofmann bromamide reaction
An amide, warmed with bromine and aqueous potassium hydroxide (or sodium hydroxide), gives a primary amine with one carbon fewer than the amide. The lost carbon leaves as carbonate:
In the reaction the alkyl group moves from the carbonyl carbon to the nitrogen, and the carbonyl carbon leaves as CO₂ (as carbonate in the alkali). It is the standard way of shortening a chain by one carbon, and it was discovered by Hofmann in 1881.
ii. Reduction of amides
Lithium aluminium hydride reduces an amide to an amine with the same number of carbons: the C=O becomes CH₂.
d. By reduction of nitroalkanes
As in Nitro Compounds, tin and concentrated hydrochloric acid (or H₂ over nickel, or LiAlH₄) reduce a nitroalkane to the primary amine:
Which preparation gives an amine with one carbon fewer than the starting compound?
Pick an answer to see why.
16.4 Physical properties of aliphatic amines
- State. Methanamine, N-methylmethanamine, N,N-dimethylmethanamine and ethanamine are gases at room temperature (ethanamine boils at 17 °C); the next ones are volatile liquids, and the higher amines are solids.
- Smell. The lower amines smell like ammonia; those from about three to six carbons have a strong fishy smell (trimethylamine is the smell of fish going off). The higher amines have little smell, since they hardly evaporate.
- Hydrogen bonding and boiling points. Primary and secondary amines have N–H bonds, so their molecules hydrogen-bond to one another, N–H···N. Their boiling points are therefore higher than those of alkanes of similar molar mass. But nitrogen is less electronegative than oxygen, so the N–H···N bond is weaker than O–H···O, and amines boil lower than alcohols and much lower than carboxylic acids.
| Compound (molar mass) | Boiling point |
|---|---|
| butane, C₄H₁₀ (58 g/mol) | −0.5 °C |
| N,N-dimethylmethanamine, (CH₃)₃N (59 g/mol), 3° | 3 °C |
| N-methylethanamine, CH₃CH₂NHCH₃ (59 g/mol), 2° | 37 °C |
| propan-1-amine, CH₃CH₂CH₂NH₂ (59 g/mol), 1° | 48 °C |
| propan-1-ol, CH₃CH₂CH₂OH (60 g/mol) | 97 °C |
Among isomers, 1° > 2° > 3°: a primary amine has two N–H hydrogens to hydrogen-bond with, a secondary one, and a tertiary none, so tertiary amines boil almost as low as alkanes.
- Solubility. The lower amines dissolve readily in water: their lone pair accepts hydrogen bonds from water, and 1° and 2° amines also donate them. Solubility falls as the carbon chain grows; amines with more than about six carbons hardly dissolve.
- Density. Amines are less dense than water (ethanamine about 0.69 g/cm³).
Propan-1-amine (59 g/mol) boils at 48 °C, but its isomer N,N-dimethylmethanamine at only 3 °C. Why?
Pick an answer to see why.
16.5 Chemical properties of aliphatic amines
a. Basic nature of amines
Amines are bases: the lone pair on the nitrogen can accept a proton, H⁺, exactly as ammonia’s does. In water a little of the amine takes a proton from water, leaving OH⁻ ions, so an amine solution turns red litmus blue:
The nitrogen is sp³ hybridized; three of its orbitals bond, and the fourth holds the lone pair, which points away from the groups and is free to bond to H⁺. Amines are basic because they donate this lone pair (a Lewis base) or accept a proton (a Brønsted–Lowry base); a base doesn’t lose electrons.
How strong a base is measured by its Kb, or more often by the pKaH, the pKa of its protonated form, RNH₃⁺. The higher the pKaH, the stronger the base: the ion holds its proton more tightly. Amines are weak bases, but stronger than ammonia.
| Base (in water, 25 °C) | pKaH | Base (in water, 25 °C) | pKaH |
|---|---|---|---|
| NH₃ | 9.25 | ||
| CH₃NH₂ (1°) | 10.66 | C₂H₅NH₂ (1°) | 10.65 |
| (CH₃)₂NH (2°) | 10.73 | (C₂H₅)₂NH (2°) | 10.84 |
| (CH₃)₃N (3°) | 9.80 | (C₂H₅)₃N (3°) | 10.75 |
| C₆H₅NH₂ (aniline) | 4.87 |
(pKaH and pKb are linked by pKaH + pKb = 14.00 at 25 °C, so methanamine’s pKb is 3.34 and aniline’s 9.13. The values are from the CRC Handbook of Chemistry and Physics, the same as in Ionic Equilibrium.)
Why amines are stronger bases than ammonia
An alkyl group pushes electrons towards the nitrogen (the +I effect). This makes the lone pair more available, and, once the proton is on, it spreads the positive charge of the ion R–NH₃⁺ and steadies it. So methanamine (pKaH 10.66) is a stronger base than ammonia (9.25).
1°, 2° and 3°: in the gas and in water
If the +I effect were the whole story, every extra alkyl group would make the amine stronger, and the order would be 3° > 2° > 1° > NH₃. That is exactly what is found when the amines are gases, with no water around them: their proton affinities (the energy released when a molecule takes a proton) rise from ammonia, 854 kJ/mol, to trimethylamine, 949 kJ/mol.
In water, the order changes, because two more things matter:
- Hydration of the ion. The ion RNH₃⁺ is steadied by water molecules hydrogen-bonded to its N–H hydrogens. A primary ammonium ion has three such hydrogens, a secondary one two, a tertiary one only one. Fewer hydrogen bonds mean a less stable ion, and so a weaker base.
- Crowding (steric hindrance). Three alkyl groups crowd the nitrogen, making it harder for water molecules to get close to the ion and for the proton to reach the lone pair.
These pull against the +I effect. For the methylamines the result is 2° > 1° > 3° > NH₃: trimethylamine falls below methylamine. Try both sides in the widget.
Which is the strongest base in water?
Pick an answer to see why.
b. Reaction with acids: salt formation
Being bases, amines react with acids to form alkylammonium salts. The lone pair takes the acid’s proton:
It is an acid–base reaction (neutralization): no atoms are added across a double bond, as in an addition reaction. The salt is an ionic solid, soluble in water, with no smell; adding NaOH gives the free amine back. This is why many amine medicines are sold as hydrochlorides (“… hydrochloride” on a strip of tablets): the salt dissolves and keeps better.
c. Carbylamine reaction (a test for primary amines)
A primary amine, warmed with chloroform and alcoholic potassium hydroxide, gives an isocyanide (carbylamine), R–N≡C:
Isocyanides have a very unpleasant smell, which is the sign of the test. Only primary amines (aliphatic or aromatic) give it, since the reaction needs the two hydrogens on the nitrogen; secondary and tertiary amines don’t.
d. Alkylation: with haloalkanes
An amine’s lone pair attacks a haloalkane, as ammonia’s does, and the nitrogen gains an alkyl group:
With excess haloalkane the alkylation goes on to the tertiary amine and the quaternary salt:
e. Acylation: with acid chlorides
Primary and secondary amines react with acid chlorides (and anhydrides): the acyl group, R–CO–, replaces a hydrogen on the nitrogen, and the product is an N-substituted amide:
A base such as pyridine is added to take up the HCl, which would otherwise turn half the amine into its salt. Tertiary amines don’t react: they have no N–H hydrogen to replace.
f. Reaction with nitrous acid, HNO₂ (test for 1°, 2°, 3° amines)
Nitrous acid is unstable, so it is made in the mixture from sodium nitrite and dilute hydrochloric acid, kept cold:
The three classes of amine do three different things with it, which is why it serves as a test.
Primary amines give an alcohol, with brisk bubbles of nitrogen gas:
(An aliphatic diazonium ion, R–N₂⁺, forms first, but it is so unstable that it loses N₂ at once, even at 0 °C. In practice a mixture of alcohol, alkene and other products forms; the steady evolution of nitrogen is the reliable sign.)
Secondary amines give an N-nitrosamine, a yellow oily liquid that doesn’t dissolve in the acid: the –N=O group (nitroso) replaces the hydrogen on the nitrogen.
Warmed with phenol and concentrated sulphuric acid, the yellow oil gives a strong color that changes when the mixture is diluted and made alkaline (Liebermann’s nitroso reaction), confirming a secondary amine.
Tertiary amines have no hydrogen on the nitrogen to replace. In the cold they simply form a soluble salt, a trialkylammonium nitrite, and nothing visible happens (Figure 16.28):
Warmed, or left for a long time, the nitrite salt does react, slowly: nitrous acid takes one alkyl group off the nitrogen (nitrosative dealkylation). That group leaves as an aldehyde, and the secondary amine left behind is nitrosated, so the products are an N-nitrosamine and an aldehyde: triethylamine gives N-nitrosodiethylamine and ethanal. It is thousands of times slower than the secondary amine’s reaction, which is why the cold test still tells the classes apart.
| Amine | With cold HNO₂ (NaNO₂ + HCl) | What you see |
|---|---|---|
| Primary, R–NH₂ | alcohol + N₂ + H₂O | brisk bubbles of colorless gas |
| Secondary, R₂NH | N-nitrosamine, R₂N–NO | yellow oily layer |
| Tertiary, R₃N | soluble salt, R₃NH⁺NO₂⁻ | clear solution, no change |
An amine gives a yellow oily layer with sodium nitrite and dilute HCl in the cold. It is a:
Pick an answer to see why.
g. Uses of aliphatic amines
- Rubber. Dimethylamine is used to make the chemicals that speed up the vulcanization of rubber.
- Medicines. Many drugs are amines: adrenaline (epinephrine) and ephedrine, both secondary amines, raise blood pressure and open the airways; procaine (Novocain), a local anesthetic once common in dentistry; diphenhydramine (Benadryl), an antihistamine, a tertiary amine.
- Surfactants. Quaternary ammonium salts with one long carbon chain are cationic surfactants: in fabric softeners, hair conditioners and disinfectants such as benzalkonium chloride.
- Making other chemicals. Amines are starting materials for dyes, drugs, pesticides, and polymers such as nylon (made from hexane-1,6-diamine).
B. Aromatic amines: aniline
Aniline (benzenamine, phenylamine), C₆H₅NH₂, is the simplest aromatic amine: an amino group on a benzene ring. Its name comes from anil, the indigo plant, the plant from whose dye it was first made: it was distilled from indigo in 1826, and named aniline in 1840 by Carl Julius Fritzsche, who got it by heating indigo with potash.
16.6 Preparation of aniline
a. From nitrobenzene
Aniline is made by reducing nitrobenzene (Nitro Compounds, Section 15.7): in the laboratory with tin (or iron) and concentrated hydrochloric acid, then sodium hydroxide to free the aniline; in industry by hydrogen over a catalyst.
b. From phenol
Phenol heated with ammonia and anhydrous zinc chloride at about 300 °C (under pressure) gives aniline and water: the –OH is replaced by –NH₂.
c. From chlorobenzene
As in Haloarenes, chlorobenzene heated with ammonia and copper(I) oxide at about 200 °C and 60 atm gives aniline:
16.7 Physical properties of aniline
- A colorless, oily liquid when freshly distilled; it slowly turns yellow, then brown, in air and light, as it is oxidized.
- Boiling point 184 °C, melting point −6 °C.
- Slightly denser than water: 1.02 g/cm³.
- Sparingly soluble in water (about 3.6 g in 100 mL): the big benzene ring outweighs the hydrogen bonds of its –NH₂; soluble in ethanol, ether and benzene.
- It has a faint, unpleasant fishy smell.
- It is toxic: absorbed through the skin as well as breathed in, it turns hemoglobin into methemoglobin, which can’t carry oxygen.
16.8 Chemical properties of aniline
a. Basicity: aniline, aliphatic amines and ammonia
Aniline is a base, but a far weaker one than ammonia or the aliphatic amines:
| Base | pKaH of its ion | pKb |
|---|---|---|
| CH₃NH₂ | 10.66 | 3.34 |
| NH₃ | 9.25 | 4.75 |
| C₆H₅NH₂ | 4.87 | 9.13 |
The difference in pKaH between ammonia and aniline is 4.38, so ammonia is about times stronger a base.
The reason is resonance. Aniline’s nitrogen lone pair is next to the ring’s π electrons and overlaps with them: it is partly delocalized into the ring. Its resonance structures are drawn in Figure 16.32; in three of them the lone pair has moved into the ring, leaving a negative charge on the ortho and para carbons.
This has two consequences:
- The lone pair is less available to take a proton.
- If aniline does take a proton, the ion C₆H₅NH₃⁺ has no lone pair left to delocalize: protonation destroys the extra resonance stability of aniline. Aniline loses more by being protonated than ammonia does, so it holds back.
In addition, the sp² carbon of the ring pulls electrons slightly (−I), the opposite of an alkyl group’s push. So the order of basic strength in water is:
- Aliphatic amines are more basic than ammonia: alkyl groups push electrons onto nitrogen (+I).
- Ammonia is more basic than aniline: its lone pair is not involved in resonance.
- Aniline is the weakest: its lone pair is delocalized into the ring.
Why is aniline a weaker base than methanamine?
Pick an answer to see why.
b. Alkylation
Aniline reacts with haloalkanes as aliphatic amines do. Each N–H hydrogen in turn is replaced, giving a secondary amine, a tertiary amine and finally a quaternary ammonium salt:
c. Acylation
Aniline reacts with ethanoyl chloride (in pyridine) or ethanoic anhydride to give acetanilide (N-phenylethanamide): an acetyl group replaces one hydrogen on the nitrogen.
Acetanilide matters for two reasons: it was one of the first fever medicines (sold as Antifebrin in 1886, and later replaced by its safer relative paracetamol, into which the body turns it), and acetylation is how the amino group is protected before nitration and bromination (Section 16.8 g).
d. Diazotization
Aniline treated with sodium nitrite and dilute hydrochloric acid at 0–5 °C (in ice) gives benzenediazonium chloride:
The diazonium ion, C₆H₅–N⁺≡N, is far more stable than an aliphatic one, because the ring’s π electrons spread its charge; still, it is kept below 5 °C and used at once: warmed, it loses nitrogen and gives phenol, and dry diazonium salts can explode. Compare this with the aliphatic primary amines, which give an alcohol and nitrogen straight away. Benzenediazonium chloride is the starting point for a whole family of compounds: phenol Grade 12: Phenol, the haloarenes (Sandmeyer reaction, Haloarenes), and the azo dyes below.
e. Carbylamine reaction
Aniline is a primary amine, so it gives the carbylamine reaction: warmed with chloroform and alcoholic potassium hydroxide, it gives phenyl isocyanide, with its foul smell.
f. Coupling reactions: azo dyes
A diazonium ion is a weak electrophile. It attacks a strongly activated benzene ring, one carrying –NH₂ or –OH, at its para carbon, and joins to it through an –N=N– (azo) group. Two rings joined by –N=N– make a long chain of alternating double bonds that absorbs visible light, so the products are colored: they are azo dyes.
With aniline (in faintly acidic solution, at 0–5 °C) the product is 4-aminoazobenzene (p-aminoazobenzene), a yellow dye. (The diazonium ion attacks the nitrogen first, giving diazoaminobenzene, C₆H₅N=N–NHC₆H₅, which rearranges in acid to the para product.)
With phenol (in cold sodium hydroxide) it gives 4-hydroxyazobenzene, an orange dye, and with naphthalen-2-ol (2-naphthol) a scarlet one, 1-phenylazo-2-naphthol; this last is the classic test for a diazonium salt, and so for a primary aromatic amine.
The nitrogen of the diazonium group stays in the product, unlike in the reactions that make phenol or the haloarenes. More than half of all the dyes made today are azo dyes, from the methyl orange in a school laboratory to the yellows and reds of food colors and clothing. Some are made from aniline itself; most from its relatives.
Benzenediazonium chloride is mixed with phenol in cold sodium hydroxide. The product is:
Pick an answer to see why.
g. Electrophilic substitution reactions
The –NH₂ group is a strong activator of the benzene ring and an ortho and para director. Its lone pair is delocalized into the ring (+R effect, Figure 16.32), raising the electron density most at the ortho and para carbons, which is where electrophiles attack. (The ring carbons are not carbanions: they simply carry more of the ring’s electron density.) Aniline is so reactive that its substitutions are hard to stop at one group, and two of them need a trick: the amino group is first protected by acetylation.
i. Bromination
Without protection, aniline and bromine water give at once a white precipitate of 2,4,6-tribromoaniline, bromine at both ortho carbons and the para carbon. No catalyst is needed. (Phenol does the same.)
With protection, only one bromine goes in, at the para carbon: aniline is acetylated, the acetanilide is brominated in ethanoic acid, and the 4-bromoacetanilide is hydrolyzed to 4-bromoaniline (Figure 16.43).
ii. Nitration
Aniline is nitrated through acetanilide: acetylation, nitration with the nitrating mixture below about 10 °C (mainly at the para carbon), then hydrolysis, gives 4-nitroaniline (Figure 16.44).
iii. Sulphonation
Aniline with concentrated sulphuric acid first forms a salt, anilinium hydrogen sulphate. Heated at about 453–473 K (180–200 °C) for several hours, this gives sulphanilic acid, 4-aminobenzenesulphonic acid. No pyridine is used.
Sulphanilic acid has a basic –NH₂ and an acidic –SO₃H on the same molecule, so the acid group gives its proton to the amino group: the molecule exists as a zwitterion (an ion with both charges), ⁺H₃N–C₆H₄–SO₃⁻. That is why it is a high-melting solid that hardly dissolves in water or organic solvents. Its amide, sulphanilamide, is the active part of the first sulpha drugs, the antibacterial medicines of the 1930s.
Why is acetanilide, not aniline, nitrated to make 4-nitroaniline?
Pick an answer to see why.
16.9 Uses of aniline
- Polyurethane. Most of the world’s aniline goes to make MDI (methylene diphenyl diisocyanate), which with other chemicals makes polyurethane foams: mattresses, cushions, insulation for refrigerators and buildings, shoe soles.
- Rubber chemicals. Aniline is the starting point for antioxidants that stop tyres cracking and for accelerators of vulcanization.
- Dyes. Azo dyes and many others, through diazonium salts.
- Medicines. Sulpha drugs and other medicines are made from aniline and its derivatives.
- Pesticides and herbicides, and the explosive tetryl.
Exercise
Multiple choice questions
- How many structural isomers of C₃H₉N can be formed?
Pick an answer to see why.
- Which of the following is a tertiary amine?
Pick an answer to see why.
- Which compound is used to separate a mixture of primary, secondary and tertiary amines?
Pick an answer to see why.
- What is the product when excess chloroethane is treated with ammonia?
Pick an answer to see why.
- What is Z in ?
Pick an answer to see why.
- Which of the following is the strongest base in water?
Pick an answer to see why.
- What is the product when propan-1-amine is treated with nitrous acid?
Pick an answer to see why.
- Which of the following gives the carbylamine test?
Pick an answer to see why.
- What is the product when alkyl cyanides are reduced?
Pick an answer to see why.
- Which is the correct order of basic strength of the methylamines in water?
Pick an answer to see why.
- In the sequence below, S gives a secondary amine with two carbon atoms when reduced. Which is correct?
Pick an answer to see why.
- To which positions does an electrophile go in the electrophilic substitution of aniline?
Pick an answer to see why.
- Choose the correct option.
| Reactant | Conditions | Product |
|---|---|---|
| CH₃NH₂ | alc. KOH/CHCl₃ | M |
| C₆H₅NO₂ | N | C₆H₅NHOH |
| O | HNO₂ + HCl at 0–5 °C | C₆H₅N₂⁺Cl⁻ |
Pick an answer to see why.
- What is the product when aniline is treated with benzenediazonium chloride?
Pick an answer to see why.
- An alcohol of molecular mass 46 u is obtained by treating a compound M with nitrous acid. What could M be?
Pick an answer to see why.
- Which compound is obtained by the reduction of methyl isocyanide?
Pick an answer to see why.
- Why is the amino group protected during nitration?
Pick an answer to see why.
- Which compound is used to separate methanamine, N-methylmethanamine and N,N-dimethylmethanamine?
Pick an answer to see why.
- During the nitration of aniline, why is the –NH₂ group acylated (protected) first?
Pick an answer to see why.
- Which compound is obtained by the reduction of ethyl isocyanide?
Pick an answer to see why.
Short answer questions
A compound V is treated with sodium nitrite and dilute HCl at 0–5 °C to give W. Hydrolysis of W gives X, which gives a violet color with FeCl₃, forming Y. W and X undergo a coupling reaction to give Z. V can also be obtained by treating nitrobenzene with Sn/HCl. Identify V, W, X, Y and Z, with equations.
Answer
Identify P, Q, R and S, and name the reaction between P and S.
| Reactant | Reagent / conditions | Product |
|---|---|---|
| P | Cu₂Cl₂/HCl | Q |
| Q | NH₃/Cu₂O | R |
| R | NaNO₂/dil. HCl | P |
| P | S | p-aminoazobenzene |
Answer
Identify A, B, C, D and E:
Answer
Your teacher gives you a beaker holding a mixture of ethanamine, N-ethylethanamine and N,N-diethylethanamine, and asks you to hand in each compound separately. Explain the procedure and write the reactions.
Answer
a. What happens when benzamide is heated with aqueous KOH and bromine at about 70 °C? b. Which is more basic, ammonia or aniline? Explain. c. Convert ethanamine into methanamine.
Answer
a. Convert methanamine into ethanamine. b. Arrange CH₃CH₂NH₂, C₆H₅NH₂ and CH₃NH₂ in increasing order of basicity, and justify the order. [2 + 1 + 2]
Answer
Identify A, B, C, D and E:
C is an aliphatic primary amine of molecular mass 45 u.
Answer
Long answer questions
A. An aliphatic gas L is passed through a red-hot iron tube and gives M. Nitration of M gives N, and reduction of N gives O. For nitrating O, its active group is first protected, and the product P is mainly p-nitroaniline. Identify L, M, N, O and P.
B. Give an example of each: i. a coupling reaction of aniline; ii. separating only the primary amine from a mixture; iii. a test for a secondary amine.
Answer
A. Describe in detail how you would separate a mixture of CH₃NH₂, CH₃NHCH₂CH₃ and (CH₃)₃N.
B. What product is obtained when nitrobenzene is treated with: a. Zn/NH₄Cl, heat; b. NaOH/Na₃AsO₃; c. conc. H₂SO₄, heat?
Answer
A = (CH₃)₂NH and B = CH₃NH₂. a. What is the product when each is treated with diethyl oxalate? b. How would you obtain B by Hofmann’s bromamide reaction? c. Show the steps to obtain methanamine from ethanamine. d. Write any three methods of preparation of aniline.
Answer
Printable PDFs
- Study notes 3 pages
- Worksheet 4 pages Answer key
Quiz yourself: Materials and Chemicals We Use, Grades 5–12 →
Practice every question in the book, and keep track of the ones you miss →
A companion to your textbook, not a replacement for it: study from the book your school uses, and where the two differ, follow your teacher. Found a mistake? Please tell us.
