Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
26 questions
Unit 5 · Work, Energy and Power
Printable PDFs
- The unit as a book (A5) 22 pages Answers as an A4 booklet, 6 sheets
- Study notes 2 pages
- Worksheet 4 pages Answer key
- Harder practice questions 2 pages Answer key
Answer these questions
- a.Explain what is meant by work.
- b.Obtain an expression for the work done by a constant force.
- c.A man carrying a load of 200 N on his head climbs up a hill through a height of 500 m. Is he doing work? Justify your answer.
Answer
- a.Work is done when a force moves its point of application in the direction of the force; it is measured by the force times the displacement along the force. It is a scalar, measured in joules.
- b.A constant force F acts on a body at an angle θ to its displacement d. Resolve F into along d and at right angles to it. Only acts along the motion, so the work done is . For θ = 0, ; for θ = 90°, .
- c.Yes. To carry the load up he pushes it upward with a force equal to its weight, 200 N, and it rises 500 m in the direction of his push. The work he does on the load is 1.0 × 10⁵ J, stored as the load’s potential energy. (He also does work lifting his own body.)
- a.Explain what is meant by the work–energy theorem.
- b.Explain how the principle of conservation of energy applies to a man sliding from rest down a vertical pole, if there is a constant force of friction on him.
Answer
- a.The work–energy theorem says that the work done by the resultant force on a body equals the change in its kinetic energy: . If the net work is positive the body speeds up; if negative, it slows down.
- b.As he slides down a height h, he loses potential energy mgh. Friction f does negative work on him. So his kinetic energy at the bottom is , less than mgh. The difference, , isn’t destroyed: it becomes heat in his hands and the pole (which is why sliding down a rope burns the palms). The total energy, kinetic + potential + heat, stays the same.
- a.How can the law of conservation of mechanical energy be used in real situations where there is friction?
- b.An 850 kg roller coaster is released from rest at point A of the track shown in the picture. Assume there is no friction or air resistance. How fast is it moving at point B?
Answer
- a.Add the work done by friction (which is negative) to the energy equation: . The mechanical energy lost, , is the heat made by friction. If we know the friction force and the path length, and we can find the final speed; or, from the speeds and heights, we can find how much work friction did.
- b.With no friction, mechanical energy is conserved. The car falls from 140 m to 95 m, a drop of 45 m:
(The mass doesn’t matter; 30 m/s exactly with g = 10.)
- a.Can the kinetic energy of a body ever be negative?
- b.The momentum of a body is increased by 100 %. What is the percentage increase in its kinetic energy?
Answer
- a.No. : mass is positive and can’t be negative, so K is zero (at rest) or positive.
- b.Momentum doubles, and , so K becomes 4 times as large: an increase of 300 %.
- a.Explain how the mechanical energy of a freely falling body stays constant until it reaches the ground.
- b.When a constant force acts on a body that is speeding up, is the power of the force constant? If not, how would the force have to change with speed for the power to stay constant?
Answer
- a.See Section 5.6.1. Let it fall from rest from height h. After falling x, , so its kinetic energy is and its potential energy : total mgh. At the start (K = 0, U = mgh) and on reaching the ground (K = mgh, U = 0) the total is also mgh. The potential energy it loses is exactly the kinetic energy it gains.
- b.No. , and v increases while F stays the same, so the power increases steadily. For constant power, F must fall as the speed rises: , the force inversely proportional to the speed. (That is how a vehicle with a constant engine power behaves: a large force at low speed, a small one at high speed, which is why it has gears.)
- a.Define the coefficient of friction.
- b.A 68.5 kg skater moving at 2.40 m/s on rough horizontal ice slows down uniformly and stops in 3.52 s, because of friction from the ice. What force does friction exert on the skater?
Answer
- a.The coefficient of friction μ is the ratio of the friction between two surfaces to the normal reaction pressing them together, (Unit 4): limiting friction for μs, kinetic friction for μk.
- b. m/s². −46.7 N, that is, 46.7 N opposite to the motion.
- a.Show that mechanical energy is conserved for a body falling freely.
- b.State the principle of conservation of mechanical energy.
- c.A block of weight 150 N is pulled 20 m along a horizontal surface at constant velocity. The coefficient of kinetic friction is 0.20, and the pull makes an angle of 60° with the vertical. Find the work done by the pull.
Hint
c. The pull’s upward part lifts the block a little, so the normal reaction is less than 150 N.
Answer
- a.See Section 5.6.1, and question 17a.
- b.When only conservative forces do work on a system, its total mechanical energy, kinetic plus potential, stays constant: constant.
- c.At 60° to the vertical, the pull P has a horizontal part and a vertical part . Vertically, . At constant velocity the horizontal forces balance:
Work done by the pull 538 J.
- a.Distinguish between an elastic and an inelastic collision.
- b.Explain an elastic collision in one dimension.
- c.A vehicle of mass 1.5 × 10⁵ kg with an engine of power 650 kW climbs a slope that rises 1 in 100, at a constant speed of 60 km/h. Find the friction force between its wheels and the slope.
Answer
- a.In both, momentum and total energy are conserved. In an elastic collision kinetic energy is also conserved (e = 1, conservative forces, no heat or sound); in an inelastic collision some kinetic energy becomes heat, sound or deformation (e < 1, non-conservative forces). In a perfectly inelastic collision the bodies stick together.
- b.See Section 5.8.1: with , momentum and kinetic energy conservation give , and then and by (5.4) and (5.5).
- c. m/s. The engine’s force: N. At constant speed it balances friction plus the slope’s pull, N. So friction N 2.43 × 10⁴ N (2.4 × 10⁴ N with g = 10).
- a.State the work–energy theorem.
- b.A mass at rest explodes into two parts of 4 units and 40 units. The larger part has 100 J of kinetic energy. Find the kinetic energy of the smaller part.
- c.Comment on why the smaller part gets so much more energy.
Answer
- a.The work done by the resultant force on a body equals the change in its kinetic energy.
- b.The momenta are equal and opposite, so : 1000 J.
- c.Both parts get momentum of the same size, p. Kinetic energy is , so for the same momentum the lighter part, moving ten times as fast, has ten times the kinetic energy. The energy comes from the explosion (chemical energy), not from nothing; the total, 1100 J, is shared inversely as the masses.
Numerical problems
A ball of mass 0.1 kg is thrown vertically upward at 20 m/s. What is its potential energy at its highest point? What is its potential energy when it is three-quarters of the way up, on its way up?
Answer
At the top it stops, so all its kinetic energy, J, has become potential energy: 20 J. Potential energy is proportional to height, so at three-quarters of the maximum height it is 15 J. (The value of g doesn’t matter.)
A block of mass 20 kg slides from the rim to the bottom of a smooth bowl of diameter 0.5 m. Find its speed at the bottom.
Answer
From the rim to the bottom of a hemispherical bowl the block falls through the radius, m. With no friction, :
(2.24 m/s with g = 10.)
An object moves from point A, position vector , to point B, , under a force (in N and m). Find the work done by the force.
Answer
Displacement . 0 J: the displacement is at right angles to the force.
A particle moves along the x-axis from x = 0 to x = 5 m under a force (F in N, x in m). Find the work done by the force.
Answer
135 J.
A car of mass 1000 kg moves at a constant 20 m/s along a level road against a friction force of 200 N. Find the power developed by its engine. The car then climbs a slope at the same constant speed, with the same friction force; . Find the new power.
Answer
On the level, the engine’s force balances friction: 4 kW.
On the slope it must also balance N: W = 13.8 kW (14 kW with g = 10).
In a football match, player A collides with player B, running towards him from the other side, and they become entangled. Player A’s mass is 40 kg and his velocity 4 m/s; player B’s mass is 60 kg and his velocity 3 m/s. Find their velocity just after the collision, assuming other forces are negligible.
Answer
Take A’s direction as positive: m/s, m/s. They move off together (perfectly inelastic):
Both move at 0.2 m/s in B’s direction: B had the larger momentum (180 against 160 kg m/s).
A train of mass 2.0 × 10⁵ kg moves at a constant 72 km/h up a straight incline against a friction force of 1.28 × 10⁴ N. The track rises 1.0 m for every 100 m along it. Find a. the rate at which the train’s potential energy increases, and b. the power the train must develop.
Answer
m/s; it rises m every second.
- a.Rate of increase of PE W = 392 kW (400 kW with g = 10).
- b.Power against friction kW. Total power 648 kW (656 kW with g = 10).
A radioactive nucleus of mass 210 units, at rest, decays into an alpha particle of mass 4 units and a residual nucleus of mass 206 units. If the alpha particle’s kinetic energy is E, find the kinetic energy of the residual nucleus.
Answer
The two have momenta of equal size, so : , about 2 % of the alpha particle’s.
A railway truck of mass 4 × 10⁴ kg moving at 3 m/s collides with another truck of mass 2 × 10⁴ kg at rest. They couple together and move off. What fraction of the first truck’s initial kinetic energy remains as kinetic energy of the two trucks?
Answer
Momentum: , so m/s.
Before: J. After: J.
Fraction remaining . (In general, for a moving body sticking to one at rest, the fraction is .)
A bullet of mass 0.010 kg is fired vertically upward at 100 m/s into a wooden block of mass 0.190 kg hanging by a long string above the gun. The bullet stays embedded in the block. Through what height does the block rise?
Answer
The collision (momentum conserved): , so m/s just after.
The rise (mechanical energy conserved): , so
(1.25 m with g = 10.) Kinetic energy is not conserved in the collision itself: of the bullet’s 50 J, only 2.5 J remains as kinetic energy; the rest becomes heat and the work of tearing the wood.
A vehicle of mass 2000 kg traveling at 10 m/s on a level road is stopped in 12.5 m by its brakes. Find the average retarding force. What power must its engine develop to take it up a slope of 1 in 10 at a constant 10 m/s, if the frictional resistance is 200 N?
Answer
Work–energy: J, so 8000 N.
Up the slope: N, plus 200 N friction = 2160 N. W = 21.6 kW (22 kW with g = 10).
Anisha pushes her physics book 1.50 m along a horizontal table top with a horizontal force of 2.40 N. The opposing force of friction is 0.600 N. Find a. the work done by her 2.40 N force, b. the work done by friction, c. the total work done on the book.
Answer
- a. 3.60 J.
- b. −0.900 J.
- c. 2.70 J, which is the book’s gain in kinetic energy (work–energy theorem).
How many joules of energy does a 100 W light bulb use in one hour? How fast would a 70 kg person have to run to have that much kinetic energy?
Answer
3.6 × 10⁵ J.
, so 101 m/s, about 365 km/h, close to a Formula 1 car’s top speed and far beyond any runner (the fastest sprinters reach about 12 m/s). An hour of light holds a lot of energy.
A ball of mass 0.420 kg is moving at 2.00 m/s. Rojina kicks it with a constant force of 40.0 N in the direction of its motion. Over what distance must her foot stay in contact with the ball to raise its speed to 6.00 m/s?
Answer
Work–energy: J, so
0.168 m.
A worker pushes a block of ice with a constant horizontal force of 80 N on a smooth level floor (friction negligible). The block starts from rest and moves 11 m in 5 s. a. What is the mass of the block? b. If the worker stops pushing after 5 s, how far does the block move in the next 5 s?
Answer
- a.From : m/s². 90.9 kg.
- b.At 5 s, m/s. With no force and no friction it keeps this velocity (first law): 22 m.
A 6.0 kg box moving at 3.0 m/s on a smooth horizontal surface runs into a light spring of force constant 75 N/cm. Use the work–energy theorem to find the greatest compression of the spring.
Answer
N/cm N/m. The spring’s force does work on the box (the area under its force graph) while the box’s kinetic energy falls from J to 0:
A tandem (two-person) bicycle team must overcome a force of 165 N to keep a speed of 9.00 m/s. Find the power each rider must give, if they share equally, in watts and in horsepower.
Answer
Total power W. Each rider: 742.5 W 1.00 hp, about one horsepower each: more than even a professional cyclist can keep up for long, so this team could hold 9 m/s only briefly.
