Skip to content

← Grade 11 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

20 questions

Unit 6 · Circular Motion

Answer these questions

19.
  • a.Differentiate between linear and circular motion.
  • b.Show that f=1T f = \dfrac{1}{T} , where f is the frequency and T the time period.
  • c.A particle in uniform circular motion has a constant speed, yet a net force acts on it. Why?
Answer

a.

Linear motion Circular motion
The body moves along a straight line. The body moves along a circle, at a fixed distance from a center.
Described by displacement, velocity and acceleration along the line. Described also by angular displacement, angular velocity and angular acceleration.
At a steady speed, the velocity is constant and no net force acts. At a steady speed, the velocity still changes direction, so there is a centripetal acceleration and a net force towards the center.
Its direction can stay the same. Its direction changes at every point.
  • b.One revolution takes T seconds, so in one second the body makes 1/T 1/T revolutions. The number of revolutions per second is the frequency, so f=1T f = \dfrac{1}{T} .
  • c.Its velocity, along the tangent, keeps changing direction, and a change of velocity is an acceleration (v2/r v^2/r , towards the center). By Newton’s second law an acceleration needs a resultant force, mv2/r mv^2/r towards the center. The force is at right angles to the motion, so it changes only the direction, never the speed.
20.
  • a.Define the angle of banking. Why is banking necessary?
  • b.At what angle should a circular road be banked so that a car running at 50 km/h can go round a bend of radius 200 m safely? (g = 9.8 m/s²)
Answer
  • a.The angle of banking is the angle through which the outer edge of a road (or the outer rail of a track) at a bend is raised above the inner edge, the angle the road makes with the horizontal. It is needed because a vehicle on a bend needs a centripetal force: on a banked road the horizontal part of the normal reaction provides it, so the vehicle needn’t rely on friction, which may be small on a wet or icy road and wears the tyres.
  • b.v=50÷3.6=13.9 v = 50 \div 3.6 = 13.9 m/s.

tan⁡θ=v2rg=13.92200×9.8=1931960=0.0984⇒θ=5.6° \tan\theta = \frac{v^2}{rg} = \frac{13.9^2}{200 \times 9.8} = \frac{193}{1960} = 0.0984 \Rightarrow \theta = 5.6°

21.
  • a.What provides the centripetal force in a conical pendulum?
  • b.Differentiate between a simple pendulum and a conical pendulum.
  • c.Find the angular velocity of a particle that goes round a circle 100 times in a minute.
Answer

a. The horizontal part of the tension in the string, Tsin⁡θ T\sin\theta , towards the center of the circle. (The vertical part, Tcos⁡θ T\cos\theta , balances the weight.)
b.

Simple pendulum Conical pendulum
The bob swings to and fro in a vertical plane along an arc. The bob goes round a horizontal circle; the string sweeps out a cone.
Its speed changes: greatest at the middle, zero at the ends. Its speed is constant.
Gravity provides the restoring force back to the middle. The tension’s horizontal part provides the centripetal force.
Period 2πl/g 2\pi\sqrt{l/g} (small swings). Period 2π(lcos⁡θ)/g 2\pi\sqrt{(l\cos\theta)/g} .

c. f=10060=1.667 f = \dfrac{100}{60} = 1.667 rev/s, so ω=2πf=2π×1.667= \omega = 2\pi f = 2\pi \times 1.667 = 10.47 rad/s.

22.
  • a.Why is a body in circular motion accelerating, even though it moves at a constant speed?
  • b.The positive nucleus of an atom attracts the electrons, yet in Bohr’s model the electrons don’t fall into it. Why?
  • c.Calculate the force needed to keep a 0.2 kg mass moving in a horizontal circle of radius 0.5 m with a period of 0.5 s.
Answer
  • a.Acceleration is the rate of change of velocity, and velocity has a direction. Moving in a circle, the body’s direction changes all the time, so its velocity changes and it accelerates, towards the center, at v2/r v^2/r , even though its speed is constant.
  • b.In Bohr’s model the electron is moving round the nucleus at high speed. The nucleus’s attraction provides exactly the centripetal force it needs for its circular orbit, mv2/r mv^2/r : the pull keeps bending its path into a circle instead of pulling it in, just as the Earth’s gravity keeps the Moon in orbit without pulling it down. (Bohr also had to postulate that electrons in these orbits don’t lose energy by radiating; quantum mechanics later explained why.)
  • c.F=4π2mrT2=4π2×0.2×0.50.52=3.9480.25=15.8 N F = \frac{4\pi^2 m r}{T^2} = \frac{4\pi^2 \times 0.2 \times 0.5}{0.5^2} = \frac{3.948}{0.25} = 15.8 \text{ N}
23.
  • a.A particle moves in a circle at a constant speed. Is its acceleration constant?
  • b.What provides the centripetal force on a car going round a level bend?
  • c.Two bodies move round circles whose radii are in the ratio 2 : 3. If their accelerations are the same, find the ratio of the squares of their speeds.
Answer
  • a.No. Its size, v2/r v^2/r , is constant, but its direction keeps changing, always pointing to the center from wherever the particle is. A vector whose direction changes is not constant.
  • b.The friction between the tyres and the road, directed towards the center of the bend.
  • c.a=v2r a = \dfrac{v^2}{r} is the same for both, so v2∝r v^2 \propto r : v12v22=r1r2= \dfrac{v_1^2}{v_2^2} = \dfrac{r_1}{r_2} = 2 : 3.
24.
  • a.Why does an airplane tilt while flying round a curve?
  • b.A racing car at a constant speed of 50 m/s takes 40 s for one lap of a circular track. Find the size of its acceleration.
Answer
  • a.To turn, the plane needs a centripetal force. The lift on its wings acts at right angles to the wings. By banking (tilting its wings), the plane tilts the lift towards the center of the turn: the lift’s vertical part holds the plane up, and its horizontal part provides the centripetal force, with tan⁡θ=v2/(rg) \tan\theta = v^2/(rg) .
  • b.Circumference =vT=50×40=2000 = vT = 50 \times 40 = 2000 m, so r=20002π=318 r = \dfrac{2000}{2\pi} = 318 m.

a=v2r=2500318=7.85 m/s2 a = \frac{v^2}{r} = \frac{2500}{318} = 7.85 \text{ m/s}^2
(Or directly a=vω=v×2πT=50×2π40=7.85 a = v\omega = v \times \dfrac{2\pi}{T} = 50 \times \dfrac{2\pi}{40} = 7.85 m/s², towards the center.)

25.
  • a.Define angular displacement.
  • b.Derive an expression for the force towards the center on a body of mass m moving at a constant speed v round a circle of radius r.
  • c.The tip of the hour hand of a clock moves 1/20 as fast as the tip of the minute hand. If the minute hand is 10 cm long, how long is the hour hand?
Hint

c. The hour hand turns at 1/12 the angular velocity of the minute hand. Use v=rω v = r\omega for each tip.

Answer
  • a.Angular displacement is the angle swept out at the center by the radius vector of a body moving round a circle, θ=s/r \theta = s/r , in radians.
  • b.As in Section 6.3: in a short time Δt \Delta t the body goes from A to B and the radius turns through θ. The velocities v⃗A \vec v_A , v⃗B \vec v_B , each of size v v , drawn from one point form a triangle PQR with QR=∣Δv⃗∣ QR = |\Delta\vec v| , similar to triangle OAB (both isosceles with angle θ between the equal sides). So Δvv=ABr \dfrac{\Delta v}{v} = \dfrac{AB}{r} , and with AB≈vΔt AB \approx v\Delta t , ΔvΔt=v2r \dfrac{\Delta v}{\Delta t} = \dfrac{v^2}{r} . As Δt→0 \Delta t \to 0 , a=v2r a = \dfrac{v^2}{r} , directed towards the center. By Newton’s second law the force is

F=ma=mv2r F = ma = \frac{mv^2}{r}
towards the center.
c. ωh=ωm12 \omega_h = \dfrac{\omega_m}{12} . The tips’ speeds: vh=rhωh v_h = r_h\omega_h , vm=rmωm v_m = r_m\omega_m , with vh=vm20 v_h = \dfrac{v_m}{20} :
rhωm12=rmωm20⇒rh=1220rm=1220×10=6 cm r_h \frac{\omega_m}{12} = \frac{r_m\omega_m}{20} \Rightarrow r_h = \frac{12}{20} r_m = \frac{12}{20} \times 10 = 6 \text{ cm}

26.
  • a.What is a conical pendulum?
  • b.Show that the period of a conical pendulum of length l whose string makes an angle θ with the vertical is 2πlcos⁡θg 2\pi\sqrt{\dfrac{l\cos\theta}{g}} .
  • c.A 10 kg object is whirled round a horizontal circle of radius 4 m by a string inclined to the vertical, at a steady 5 m/s. Find i. the tension in the string and ii. the angle of the string to the vertical (g = 10 m/s²).
Answer
  • a.A conical pendulum is a bob hanging on a string that moves round a horizontal circle at a constant speed, the string keeping a constant angle with the vertical and sweeping out a cone.
  • b.Forces on the bob: weight mg mg down, tension T T along the string. Vertically Tcos⁡θ=mg T\cos\theta = mg ; horizontally Tsin⁡θ=mv2/r T\sin\theta = mv^2/r . Dividing, tan⁡θ=v2rg \tan\theta = \dfrac{v^2}{rg} . From the geometry tan⁡θ=rh \tan\theta = \dfrac{r}{h} , with h=lcos⁡θ h = l\cos\theta . So rh=v2rg \dfrac{r}{h} = \dfrac{v^2}{rg} , giving ω2=v2r2=gh \omega^2 = \dfrac{v^2}{r^2} = \dfrac{g}{h} . The period is

τ=2πω=2πhg=2πlcos⁡θg \tau = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{h}{g}} = 2\pi\sqrt{\frac{l\cos\theta}{g}}
c. i. mv2r=10×254=62.5 \dfrac{mv^2}{r} = \dfrac{10 \times 25}{4} = 62.5 N; mg=100 mg = 100 N.
T=(mg)2+(mv2r)2=1002+62.52=13 906=118 N T = \sqrt{(mg)^2 + \left(\frac{mv^2}{r}\right)^2} = \sqrt{100^2 + 62.5^2} = \sqrt{13\,906} = 118 \text{ N}
ii. tan⁡θ=v2rg=2540=0.625⇒θ= \tan\theta = \dfrac{v^2}{rg} = \dfrac{25}{40} = 0.625 \Rightarrow \theta = 32° to the vertical.

27.
  • a.What is meant by the banking of a track?
  • b.Find the angle through which the outer edge of a road must be raised at a bend of radius r, for a speed v.
  • c.A train of mass 10⁵ kg rounds a curve of radius 150 m at 20 m/s. Find the horizontal thrust on the outer rail if the track is not banked. At what angle must the track be banked so that there is no thrust on the rail? (g = 9.8 m/s²)
Answer
  • a.Banking a track means raising its outer edge (or outer rail) above the inner one at a bend, so that the track slopes down towards the center of the bend.
  • b.On the banked road the normal reaction R is at θ to the vertical. Vertically Rcos⁡θ=mg R\cos\theta = mg ; horizontally Rsin⁡θ=mv2/r R\sin\theta = mv^2/r . Dividing, tan⁡θ=v2rg \tan\theta = \dfrac{v^2}{rg} , so θ=tan⁡−1v2rg \theta = \tan^{-1}\dfrac{v^2}{rg} .
  • c.Unbanked, the outer rail’s sideways push on the wheel flanges provides all the centripetal force; the thrust of the wheels on the rail is equal and opposite:

F=mv2r=105×202150=2.67×105 N F = \frac{mv^2}{r} = \frac{10^5 \times 20^2}{150} = 2.67 \times 10^5 \text{ N}
For no thrust: tan⁡θ=v2rg=400150×9.8=0.272⇒θ= \tan\theta = \dfrac{v^2}{rg} = \dfrac{400}{150 \times 9.8} = 0.272 \Rightarrow \theta = 15.2°.

28.
  • a.What is motion in a vertical circle?
  • b.Find the critical velocity a body needs at the top to go safely round a vertical circle.
  • c.A construction team wants cars to go round a level bend without skidding even in bad conditions. Find the least radius the bend can have if a car may travel at 110 km/h when the coefficient of static friction between the tyres and the road is only 0.60. (g = 9.8 m/s²)
Answer
  • a.Motion in a vertical circle is the motion of a body round a circle in a vertical plane (a stone whirled on a string beside you, a Ferris wheel, a roller-coaster loop). Gravity acts along the path, so the tension (or the normal force) changes round the circle, and, unless driven, the speed changes too.
  • b.At the top, the tension and the weight both point to the center: T+mg=mv2r T + mg = \dfrac{mv^2}{r} . The string can’t push, so T≥0 T \geq 0 ; the least speed is when T=0 T = 0 : mg=mv2r mg = \dfrac{mv^2}{r} , so the critical velocity is v=gr v = \sqrt{gr} . (Moving freely, the body needs 5gr \sqrt{5gr} at the bottom to arrive at the top with it.)
  • c.v=110÷3.6=30.6 v = 110 \div 3.6 = 30.6 m/s. Friction must provide the centripetal force: mv2r≤μmg \dfrac{mv^2}{r} \le \mu mg , so

r≥v2μg=30.620.60×9.8=9345.88=159 m r \ge \frac{v^2}{\mu g} = \frac{30.6^2}{0.60 \times 9.8} = \frac{934}{5.88} = 159 \text{ m}
The least radius is about 159 m.

Numerical problems

29.

A 100 g mass hangs on a string 40 cm long. Keeping the string taut, it is made to go round a horizontal circle of radius 10 cm. Find its angular speed. (g = 9.8 m/s²)

Answer

It is a conical pendulum with l=0.40 l = 0.40 m, r=0.10 r = 0.10 m. sin⁡θ=0.100.40=0.25 \sin\theta = \dfrac{0.10}{0.40} = 0.25 , so cos⁡θ=1−0.0625=0.968 \cos\theta = \sqrt{1 - 0.0625} = 0.968 and h=lcos⁡θ=0.387 h = l\cos\theta = 0.387 m.
ω=gh=9.80.387=25.3=5.03 rad/s \omega = \sqrt{\frac{g}{h}} = \sqrt{\frac{9.8}{0.387}} = \sqrt{25.3} = 5.03 \text{ rad/s}

30.

What is the angular velocity of the minute hand of a clock? What is its angular displacement in 20 minutes? If the minute hand is 5 cm long, what is the linear velocity of its tip?

Answer

It turns once in 3600 s: ω=2π3600= \omega = \dfrac{2\pi}{3600} = 1.745 × 10⁻³ rad/s.
In 20 minutes, a third of a turn: θ=2π3= \theta = \dfrac{2\pi}{3} = 2.09 rad (120°).
v=rω=0.05×1.745×10−3= v = r\omega = 0.05 \times 1.745 \times 10^{-3} = 8.73 × 10⁻⁵ m/s (under a tenth of a millimeter per second).

31.

A 0.8 kg stone is tied to one end of a string 0.9 m long, which breaks if its tension goes above 600 N. The stone is whirled in a horizontal circle about the fixed other end. Find the greatest speed it can reach without breaking the string. (Ignore its weight.)

Answer

T=mv2r⇒v=Trm=600×0.90.8=675=26.0 m/s T = \frac{mv^2}{r} \Rightarrow v = \sqrt{\frac{Tr}{m}} = \sqrt{\frac{600 \times 0.9}{0.8}} = \sqrt{675} = 26.0 \text{ m/s}

32.

A 200 g bob is whirled in a horizontal circle of radius 50 cm on a string inclined at 30° to the vertical. Find the tension in the string and the speed of the bob. (g = 9.8 m/s²)

Answer

T=mgcos⁡θ=0.2×9.8cos⁡30°=1.960.866=2.26 N T = \frac{mg}{\cos\theta} = \frac{0.2 \times 9.8}{\cos 30°} = \frac{1.96}{0.866} = 2.26 \text{ N}
tan⁡θ=v2rg⇒v=rgtan⁡θ=0.5×9.8×0.577=2.83=1.68 m/s \tan\theta = \frac{v^2}{rg} \Rightarrow v = \sqrt{rg\tan\theta} = \sqrt{0.5 \times 9.8 \times 0.577} = \sqrt{2.83} = 1.68 \text{ m/s}
Tension about 2.3 N, speed about 1.7 m/s.

33.

On a meter-gauge railway (the rails 1 m apart), a bend has a radius of curvature of 50 m. A train goes round it at 36 km/h. For no side thrust on the rails, how high must the outer rail be above the inner one? (g = 9.8 m/s²)

Answer

v=36÷3.6=10 v = 36 \div 3.6 = 10 m/s. tan⁡θ=v2rg=10050×9.8=0.204 \tan\theta = \dfrac{v^2}{rg} = \dfrac{100}{50 \times 9.8} = 0.204 , θ = 11.5°.
The rise across the 1 m gauge: h=dsin⁡θ=1×sin⁡11.5°= h = d\sin\theta = 1 \times \sin 11.5° = 0.20 m. (For small angles sin⁡θ≈tan⁡θ \sin\theta \approx \tan\theta , giving the same 0.20 m.)

34.

A stone on an 80 cm string is whirled in a horizontal circle at a constant speed, making 14 revolutions in 25 s. Find the size and direction of its acceleration.

Answer

f=1425=0.56 f = \dfrac{14}{25} = 0.56 Hz, ω=2πf=3.52 \omega = 2\pi f = 3.52 rad/s.
a=rω2=0.80×3.522= a = r\omega^2 = 0.80 \times 3.52^2 = 9.9 m/s², directed along the radius towards the center of the circle.

35.

A car moves round a horizontal circular track of radius 10 m at a constant 10 m/s. A plumb bob hangs from the roof of the car on a light rigid rod. Find the angle the rod makes with the vertical. (g = 10 m/s²)

Answer

The bob goes round with the car, a conical pendulum: tan⁡θ=v2rg=10010×10=1 \tan\theta = \dfrac{v^2}{rg} = \dfrac{100}{10 \times 10} = 1 , so θ = 45°, the bob swung out away from the center of the track.

36.

A 500 g stone on a string 50 cm long, which breaks if its tension goes above 20 N, is whirled in a vertical circle whose center is 100 cm above the ground. The angular speed is increased very slowly until the string breaks. Where is the break most likely, at what angular speed, and where does the stone hit the ground? (g = 10 m/s²)

Answer

This is the worked example in Section 6.6.

Where: at the lowest point, where the tension is greatest, 50 cm above the ground.

Angular speed: 20=0.5 v20.5+0.5×10⇒v=15=3.87 20 = \dfrac{0.5\,v^2}{0.5} + 0.5 \times 10 \Rightarrow v = \sqrt{15} = 3.87 m/s; ω=v/r= \omega = v/r = 7.75 rad/s.

Landing: fired horizontally from 0.50 m: t=2×0.5/10=0.316 t = \sqrt{2 \times 0.5/10} = 0.316 s; it lands 3.87×0.316= 3.87 \times 0.316 = 1.22 m from the point below the break, after 0.32 s in the air.

37.

A spaceman in training is whirled round in a seat 5 m from the axis of rotation. He can withstand an acceleration of up to 9g. What is the greatest number of revolutions per second allowed? (g = 10 m/s²)

Answer

a=4π2f2r⇒f=12πar=12π905=4.246.28=0.675 rev/s a = 4\pi^2 f^2 r \Rightarrow f = \frac{1}{2\pi}\sqrt{\frac{a}{r}} = \frac{1}{2\pi}\sqrt{\frac{90}{5}} = \frac{4.24}{6.28} = 0.675 \text{ rev/s}

38.

A 0.4 kg mass is whirled on a string at a constant speed v in a vertical circle of radius 1 m. The least tension in the string is 3 N. Find i. v, ii. the greatest tension, iii. the tension when the string is horizontal. (g = 10 m/s²)

Answer
  • i.The least tension is at the top: Tmin⁡=mv2r−mg⇒3=0.4v2−4 T_{\min} = \dfrac{mv^2}{r} - mg \Rightarrow 3 = 0.4v^2 - 4 , so v2=17.5 v^2 = 17.5 , v= v = 4.2 m/s.
  • ii.At the bottom: Tmax⁡=mv2r+mg=7+4= T_{\max} = \dfrac{mv^2}{r} + mg = 7 + 4 = 11 N.
  • iii.With the string horizontal, the weight is along the tangent: T=mv2r= T = \dfrac{mv^2}{r} = 7 N.