Skip to content

← Grade 11 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

25 questions

Unit 4 · Dynamics

Answer these questions

21.
  • a.State Newton’s first law of motion.
  • b.How does it define force?
  • c.Why is it called the law of inertia?
Answer
  • a.Every body continues in its state of rest, or of uniform motion in a straight line, unless an external resultant force acts on it to change that state.
  • b.It tells us what a force does: a force is that which changes, or tends to change, a body’s state of rest or of uniform motion in a straight line.
  • c.It says that, left to itself, a body keeps its state, at rest or moving steadily. This tendency to resist a change in state is inertia, so the first law is the law of inertia.
22.
  • a.State the impulse–momentum theorem.
  • b.Show that impulse equals the change in momentum of a body.
  • c.Why are china and glassware wrapped in straw or paper before packing?
Answer
  • a.The impulse of a force on a body (force × time it acts) equals the change in the body’s momentum: F⃗Δt=mv⃗−mu⃗ \vec F\Delta t = m\vec v - m\vec u .
  • b.By the second law, F⃗=mv⃗−mu⃗Δt \vec F = \dfrac{m\vec v - m\vec u}{\Delta t} . Multiply both sides by Δt \Delta t : F⃗Δt=mv⃗−mu⃗ \vec F\Delta t = m\vec v - m\vec u . The left side is the impulse, the right side the change in momentum.
  • c.If a packed dish is jolted, its change in momentum is fixed by its speed. The straw or paper lets it come to rest gradually, over a longer time; since F=Δp/Δt F = \Delta p/\Delta t , a longer time means a smaller force on the dish, too small to break it.
23.
  • a.Why is the second law called the real law of motion?
  • b.Why is k taken as 1 in deriving F = ma?
  • c.A 2 kg body moving at 8 m/s is stopped in 2 s by a force. Find the force.
Answer
  • a.Both the other laws come out of it (or with it). With F=0 F = 0 , m(v−u)/t=0 m(v - u)/t = 0 , so v=u v = u : the first law. With the second and third laws together we get conservation of momentum. See “Why the second law is the real law” in Section 4.3.
  • b.F=kma F = kma holds with any unit of force. We choose the unit so that k=1 k = 1 : the newton is defined as the force that gives 1 kg an acceleration of 1 m/s², so 1=k×1×1 1 = k \times 1 \times 1 and k=1 k = 1 . This makes the law as simple as possible, F=ma F = ma .
  • c.a=0−82=−4 a = \dfrac{0 - 8}{2} = -4 m/s², so F=ma=2×(−4)=−8 F = ma = 2 \times (-4) = -8 N: a force of 8 N against the motion. (Or impulse: F×2=2×8 F \times 2 = 2 \times 8 .)
24.
  • a.Define a couple.
  • b.A wheel of radius 0.5 m is turned through 30° by a couple of two forces of 100 N each. Find the work done.
  • c.In finding this work, why is the arm of the couple twice the radius?
Answer
  • a.A couple is a pair of equal and opposite parallel forces whose lines of action don’t coincide. It turns a body without moving it along.
  • b.The forces act at the ends of a diameter, so the arm is 2r=1.0 2r = 1.0 m and the torque τ=100×1.0=100 \tau = 100 \times 1.0 = 100 N m. The angle is 30°=π/6 30° = \pi/6 rad:

W=τθ=100×π6=52.4 J W = \tau\theta = 100 \times \frac{\pi}{6} = \mathbf{52.4 \text{ J}}
c. The two forces act at opposite ends of a diameter, so the perpendicular distance between their lines of action is the diameter, 2r 2r . (Equally, each force moves an arc rθ r\theta , and together they do 2Frθ 2Fr\theta .)

25.
  • a.“Friction is a necessary evil.” Justify this.
  • b.Show that the angle of friction equals the angle of repose.
  • c.A ball sliding on ice at 14 m/s comes to rest after 40 m. Find the coefficient of friction (g = 9.8 m/s²).
Hint

c. Friction is the only horizontal force: a=−μg a = -\mu g .

Answer
  • a.Necessary, because without it we couldn’t walk, write, hold anything, drive a nail, or start, steer and stop a vehicle. Evil, because it wastes energy as heat, wears out moving parts, and keeps every machine below 100 % efficiency. (Section 4.8.)
  • b.Angle of friction: tan⁡λ=F/R=μ \tan\lambda = F/R = \mu (Section 4.9). Angle of repose: on the plane at θ, just slipping, F=mgsin⁡θ F = mg\sin\theta and R=mgcos⁡θ R = mg\cos\theta , so tan⁡θ=F/R=μ \tan\theta = F/R = \mu (Section 4.10). Both tangents equal μ, so λ=θ \lambda = \theta .
  • c.Friction gives a=−μg a = -\mu g . From v2=u2+2as v^2 = u^2 + 2as : 0=142−2μg×40 0 = 14^2 - 2\mu g \times 40 , so

μ=1962×9.8×40=196784=0.25 \mu = \frac{196}{2 \times 9.8 \times 40} = \frac{196}{784} = \mathbf{0.25}

26.
  • a.How would you verify the principle of moments in the laboratory?
  • b.A uniform meter rule of mass 100 g carries masses of 10 g, 30 g, 50 g, 70 g and 90 g at the 10 cm, 30 cm, 50 cm, 70 cm and 90 cm marks. Find the position of the center of gravity.
Hint

b. The rule’s own 100 g acts at its middle, the 50 cm mark. Take moments about the zero end.

Answer
  • a.Balance a meter rule on a knife edge at its center (so its weight has no moment). Hang two or more known masses from it with thread loops, on both sides, and slide them until the rule balances horizontally. Read each mass’s distance from the knife edge. Find the sum of the clockwise moments (mass × distance on one side) and of the anticlockwise moments on the other: they are equal. Repeat with other masses and positions. (Try it in the widget above.)
  • b.The center of gravity is where the total weight acts, so its moment about the zero end equals the sum of the moments of all the parts:

Moments about the 0 cm mark (in g cm): 10×10+30×30+50×50+70×70+90×90+100×50 10 \times 10 + 30 \times 30 + 50 \times 50 + 70 \times 70 + 90 \times 90 + 100 \times 50
=100+900+2500+4900+8100+5000=21 500 = 100 + 900 + 2500 + 4900 + 8100 + 5000 = 21\,500
Total mass =10+30+50+70+90+100=350 = 10 + 30 + 50 + 70 + 90 + 100 = 350 g.
x=21 500350=61.4 cm from the zero end x = \frac{21\,500}{350} = \mathbf{61.4 \text{ cm}} \text{ from the zero end}

27.
  • a.State the principle of conservation of linear momentum and explain it from Newton’s third law.
  • b.A superhero throws a boulder of weight 2400 N. What horizontal force must he apply to give it a horizontal acceleration of 12.0 m/s²?
  • c.If a friction of 60 N opposes the motion, what horizontal force gives the same acceleration?
Answer
  • a.With no external force on a system, its total momentum stays constant: m1u1+m2u2=m1v1+m2v2 m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2 . In a collision, by the third law F12=−F21 F_{12} = -F_{21} , for the same time Δt; each force is the rate of change of momentum of the body it acts on, so the two bodies’ momenta change by equal and opposite amounts, and the total doesn’t change (the derivation in Section 4.2).
  • b.Mass m=Wg=24009.8=244.9 m = \dfrac{W}{g} = \dfrac{2400}{9.8} = 244.9 kg. Force F=ma=244.9×12.0= F = ma = 244.9 \times 12.0 = 2940 N (with g = 10, 2880 N).
  • c.The applied force must beat the friction as well: F=2940+60= F = 2940 + 60 = 3000 N.
28.
  • a.Define impulse.
  • b.The graph shows the force on an object against time. Find the impulse between 0 and 10 s.
  • c.If the object’s mass is 2 kg, find its acceleration at i. 2 s and ii. 6 s.
F (N)t (s)2002610
Figure 4.25 For question 28: the force rises steadily from 0 to 20 N in the first 2 s, stays at 20 N until 6 s, then falls steadily to 0 at 10 s.
Hint

b. Impulse is the area under the force–time graph: split it into a triangle, a rectangle and a triangle.

Answer
  • a.Impulse is the product of a force and the time for which it acts, F⃗Δt \vec F\Delta t (the area under a force–time graph); it equals the change in momentum it produces. Unit: N s.
  • b.Area = triangle (0–2 s) + rectangle (2–6 s) + triangle (6–10 s)

=12×2×20+4×20+12×4×20=20+80+40= = \tfrac{1}{2} \times 2 \times 20 + 4 \times 20 + \tfrac{1}{2} \times 4 \times 20 = 20 + 80 + 40 = 140 N s (= 140 kg m/s).
c. At both 2 s and 6 s the force is 20 N, so a=F/m=20/2= a = F/m = 20/2 = 10 m/s² each time.

29.
  • a.Define the angle of friction and the angle of repose, and show that they are equal.
  • b.A 1 kg block on a plane inclined at 30° starts to slide down from rest. If the coefficient of kinetic friction is 0.2, find its velocity after 5 s.
  • c.Find its velocity one second later, at 6 s.
Hint

b. Along the slope: ma=mgsin⁡θ−μmgcos⁡θ ma = mg\sin\theta - \mu mg\cos\theta .

Answer
  • a.The angle of friction is the angle between the normal reaction and the resultant of the normal reaction and the limiting friction; the angle of repose is the angle of a plane at which a body on it just begins to slide. Both have tan⁡=μ \tan = \mu (Sections 4.9 and 4.10, and Question 25b), so they are equal.
  • b.a=g(sin⁡30°−0.2cos⁡30°)=9.8×(0.5−0.173)=9.8×0.327=3.20 a = g(\sin 30° - 0.2\cos 30°) = 9.8 \times (0.5 - 0.173) = 9.8 \times 0.327 = 3.20 m/s².

v=at=3.20×5= v = at = 3.20 \times 5 = 16.0 m/s (with g = 10, a=3.27 a = 3.27 m/s² and v=16.3 v = 16.3 m/s).
c. v=3.20×6= v = 3.20 \times 6 = 19.2 m/s (19.6 m/s with g = 10).

Numerical problems

30.

A little wagon of mass 7 kg moves in a straight line on a frictionless horizontal surface at 4 m/s. It is then pushed 3 m in the direction of its velocity by a force of 10 N. Find the acceleration produced and the wagon’s final speed.

Answer

a=F/m=10/7= a = F/m = 10/7 = 1.43 m/s².
v2=u2+2as=16+2×1.43×3=16+8.57=24.57 v^2 = u^2 + 2as = 16 + 2 \times 1.43 \times 3 = 16 + 8.57 = 24.57 , so v= v = 4.96 m/s.

31.

Find the acceleration of a block sliding down a plane inclined at 45° to the horizontal, if the coefficient of sliding friction is 0.3 (g = 9.8 m/s²).

Answer

a=g(sin⁡45°−μcos⁡45°)=9.8×0.707×(1−0.3)=9.8×0.495= a = g(\sin 45° - \mu\cos 45°) = 9.8 \times 0.707 \times (1 - 0.3) = 9.8 \times 0.495 = 4.85 m/s² (4.95 m/s² with g = 10).

32.

A 150 g wooden block rests on an inclined plane; the coefficient of static friction is 0.30. Find a. the greatest angle to which the plane can be tilted without the block slipping, and b. the force parallel to the plane needed to stop it slipping when the plane is at 30° (g = 9.8 m/s²).

Answer
  • a.θ=tan⁡−10.30= \theta = \tan^{-1}0.30 = 16.7°.
  • b.At 30° the block would slide. Down the slope: mgsin⁡30°=0.15×9.8×0.5=0.735 mg\sin 30° = 0.15 \times 9.8 \times 0.5 = 0.735 N. The most friction can give, up the slope: μmgcos⁡30°=0.30×0.15×9.8×0.866=0.382 \mu mg\cos 30° = 0.30 \times 0.15 \times 9.8 \times 0.866 = 0.382 N. The extra force needed up the slope is 0.735−0.382= 0.735 - 0.382 = 0.35 N (0.36 N with g = 10).
33.

A shot-putter moves a 7 kg shot from rest through 2.8 m and releases it at 13 m/s. Find the average force on the shot.

Answer

a=v2−u22s=1695.6=30.2 a = \dfrac{v^2 - u^2}{2s} = \dfrac{169}{5.6} = 30.2 m/s²; F=ma=7×30.2= F = ma = 7 \times 30.2 = 211 N (about 2.1×102 2.1 \times 10^2 N). (Gravity is ignored.)

34.

A 5 kg block on a horizontal table is tied by a cord, over a light frictionless pulley at the table’s edge, to a hanging 5 kg block. The coefficient of kinetic friction between the block and the table is 0.5. Find the acceleration and the tension in the cord (g = 9.8 m/s²).

5 kg5 kg
Figure 4.26 For question 34: a 5 kg block on a table, tied over a pulley at the edge to a hanging 5 kg block.
Answer

Hanging block: m2g−T=m2a m_2g - T = m_2a . Block on the table: T−μm1g=m1a T - \mu m_1g = m_1a . Adding:
a=m2g−μm1gm1+m2=5×9.8−0.5×5×9.810=24.510=2.45 m/s2 a = \frac{m_2g - \mu m_1g}{m_1 + m_2} = \frac{5 \times 9.8 - 0.5 \times 5 \times 9.8}{10} = \frac{24.5}{10} = \mathbf{2.45 \text{ m/s}^2}
T=m2(g−a)=5×(9.8−2.45)= T = m_2(g - a) = 5 \times (9.8 - 2.45) = 36.75 N.
(With g = 10: a = 2.5 m/s², T = 37.5 N.)

35.

A shot of mass 7.30 kg is released at 15.0 m/s at 40° above the horizontal. Find the horizontal and vertical components of its momentum.

Answer

p=mv=7.30×15.0=109.5 p = mv = 7.30 \times 15.0 = 109.5 kg m/s.
Horizontal: pcos⁡40°=109.5×0.766= p\cos 40° = 109.5 \times 0.766 = 83.9 kg m/s; vertical: psin⁡40°=109.5×0.643= p\sin 40° = 109.5 \times 0.643 = 70.4 kg m/s.

36.

Two skaters collide and hold on to each other on frictionless ice. One, of mass 70.0 kg, moves to the right at 2.00 m/s; the other, of mass 65.0 kg, moves to the left at 2.50 m/s. Find their velocity just after the collision.

Answer

Right positive: 70.0×2.00+65.0×(−2.50)=(70.0+65.0)v 70.0 \times 2.00 + 65.0 \times (-2.50) = (70.0 + 65.0)v , so 140−162.5=135v 140 - 162.5 = 135v and v=−0.167 v = -0.167 m/s: 0.167 m/s to the left.

37.

A bullet of mass 1.80 g moving at 350 m/s strikes a tree and penetrates 0.130 m. Assuming a constant retarding force, find a. the time it takes to stop and b. the force the tree exerts on it.

Answer
  • a.Average speed while stopping =3502=175 = \tfrac{350}{2} = 175 m/s, so t=0.130175= t = \dfrac{0.130}{175} = 7.4×10−4 7.4 \times 10^{-4} s.
  • b.F=Δpt=1.80×10−3×3507.43×10−4= F = \dfrac{\Delta p}{t} = \dfrac{1.80 \times 10^{-3} \times 350}{7.43 \times 10^{-4}} = 848 N.
38.

Two dogs pull horizontally on ropes tied to a post, with 60.0° between the ropes. Dog A pulls with 270 N and dog B with 300 N. Find the size of the resultant force and the angle it makes with dog A’s rope.

Answer

R=2702+3002+2×270×300cos⁡60°=72 900+90 000+81 000=243 900= R = \sqrt{270^2 + 300^2 + 2 \times 270 \times 300\cos 60°} = \sqrt{72\,900 + 90\,000 + 81\,000} = \sqrt{243\,900} = 494 N.
tan⁡α=300sin⁡60°270+300cos⁡60°=259.8420=0.619 \tan\alpha = \dfrac{300\sin 60°}{270 + 300\cos 60°} = \dfrac{259.8}{420} = 0.619 , so α= \alpha = 31.7° from dog A’s rope.

39.

A hockey puck of mass 0.160 kg is at rest at the origin on frictionless ice. From t = 0 a player pushes it with 0.250 N along the x-axis until t = 2.00 s. a. Find its position and speed at 2.00 s. b. The same force is applied again from t = 5.00 s. Find its position and speed at 7.00 s.

Answer

a=0.250/0.160=1.5625 a = 0.250/0.160 = 1.5625 m/s².

  • a.x=12at2=12×1.5625×4= x = \tfrac{1}{2}at^2 = \tfrac{1}{2} \times 1.5625 \times 4 = 3.13 m; v=at= v = at = 3.13 m/s.
  • b.From 2 s to 5 s it coasts: x=3.125+3.125×3=12.5 x = 3.125 + 3.125 \times 3 = 12.5 m at 5 s. From 5 s to 7 s it accelerates again: x=12.5+3.125×2+12×1.5625×4=12.5+6.25+3.125= x = 12.5 + 3.125 \times 2 + \tfrac{1}{2} \times 1.5625 \times 4 = 12.5 + 6.25 + 3.125 = 21.9 m; v=3.125+1.5625×2= v = 3.125 + 1.5625 \times 2 = 6.25 m/s.
40.

A 12.0 kg chair stands on a rough horizontal floor. You push it with a force of 40.0 N directed at 37.0° below the horizontal, and it slides. a. Draw a labeled free-body diagram for the chair. b. Find the normal force of the floor on the chair.

Answer

a. Four forces act on the chair: its weight mg mg (down), the floor’s normal force N N (up), your push F=40.0 F = 40.0 N (slanting down and forward at 37°), and friction f f (backward, along the floor).

F = 40 N37°mgNf
Figure 4.27 For question 40: the chair’s free-body diagram: weight mg down, normal force N up, the push F at 37° below the horizontal, friction f backward.

b. Vertically there is no acceleration: N=mg+Fsin⁡37°=12.0×9.8+40.0×0.602=117.6+24.1= N = mg + F\sin 37° = 12.0 \times 9.8 + 40.0 \times 0.602 = 117.6 + 24.1 = 142 N. The push presses the chair into the floor, so N is more than the weight.

41.

A baseball of mass 0.145 kg moves in the +y direction at 1.30 m/s, and a tennis ball of mass 0.0570 kg moves in the −y direction at 7.80 m/s. Find the size and direction of the total momentum of the two balls.

Answer

p=0.145×1.30+0.0570×(−7.80)=0.1885−0.4446=−0.256 p = 0.145 \times 1.30 + 0.0570 \times (-7.80) = 0.1885 - 0.4446 = -0.256 kg m/s: 0.256 kg m/s in the −y direction. The tennis ball, lighter but six times faster, carries more momentum than the baseball.

42.

A radio aerial on top of a 20 m mast pulls horizontally on it with 600 N. The mast is held by a stay wire from a point 6 m below the top to the ground, at 60° to the horizontal. Taking the ground’s action on the mast as a single force at its base, find the tension in the stay wire.

600 NT60°6 m14 mO
Figure 4.28 For question 42: the 20 m mast, the aerial’s 600 N pull at the top, and the stay wire from 14 m up to the ground at 60° to the horizontal.
Hint

Take moments about the base: the ground’s force has no moment there.

Answer

The stay wire meets the mast 20−6=14 20 - 6 = 14 m above the ground. Its tension T has a horizontal part Tcos⁡60° T\cos 60° , pulling the mast back, and a vertical part along the mast (no moment about the base). Moments about the base:
Tcos⁡60°×14=600×20⇒T=12 00014×0.5=1714 N T\cos 60° \times 14 = 600 \times 20 \quad\Rightarrow\quad T = \frac{12\,000}{14 \times 0.5} = \mathbf{1714 \text{ N}}

43.

A typical car weighs about 12 000 N (a mass of about 1200 kg). If the coefficient of rolling friction is 0.015, find the horizontal force needed to keep it moving at a constant 72 km/h on a level road, and the power the engine must develop to keep up this speed (ignoring air resistance).

Answer

At a constant speed the driving force equals the rolling friction: F=μR=0.015×12 000= F = \mu R = 0.015 \times 12\,000 = 180 N.
72 km/h = 20 m/s, so the power is P=Fv=180×20=3600 P = Fv = 180 \times 20 = 3600 W = 3.6 kW (Unit 5).
In real driving, air resistance at 72 km/h is larger than rolling friction, so a car needs a good deal more power than this.

44.

A roller of diameter 1.0 m weighs 360 N. Find the horizontal force, applied at its center, needed to pull it over a brick 0.1 m high.

FW0.3 m0.4 mP0.1 m
Figure 4.29 For question 44: the roller just lifting off the ground at the brick’s corner P, with its weight W, the pull F at its center, and the arms of both about P.
Hint

As the roller just lifts off, the ground no longer pushes on it: it turns about the brick’s corner P. Take moments about P.

Answer

Radius r=0.5 r = 0.5 m. The center is r−h=0.5−0.1=0.4 r - h = 0.5 - 0.1 = 0.4 m above the corner P, and horizontally r2−(r−h)2=0.25−0.16=0.3 \sqrt{r^2 - (r - h)^2} = \sqrt{0.25 - 0.16} = 0.3 m from it. About P, the pull F has an arm of 0.4 m, and the weight an arm of 0.3 m:
F×0.4=360×0.3⇒F=270 N F \times 0.4 = 360 \times 0.3 \quad\Rightarrow\quad F = \mathbf{270 \text{ N}}

45.

A block of mass m1 m_1 on a smooth plane inclined at θ is tied by a light string, over a pulley at the top of the plane, to a hanging block of mass m2 m_2 .

  • a.Find the acceleration of the system in terms of m1 m_1 , m2 m_2 , θ and g.
  • b.Find the tension in the string.
  • c.If m1=m2 m_1 = m_2 and θ = 25°, find the acceleration.
θm₁m₂
Figure 4.30 For question 45: block m₁ on a smooth slope at θ, tied over a pulley at the top to the hanging block m₂.
Answer

Take the direction in which m2 m_2 falls as positive.
a. Hanging block: m2g−T=m2a m_2g - T = m_2a . Block on the slope (only m1gsin⁡θ m_1g\sin\theta acts along it): T−m1gsin⁡θ=m1a T - m_1g\sin\theta = m_1a . Adding:

a=(m2−m1sin⁡θ) gm1+m2 a = \frac{(m_2 - m_1\sin\theta)\,g}{m_1 + m_2}

  • b.T=m2(g−a)=m2g(1−m2−m1sin⁡θm1+m2)=m1m2 g (1+sin⁡θ)m1+m2 T = m_2(g - a) = m_2g\left(1 - \dfrac{m_2 - m_1\sin\theta}{m_1 + m_2}\right) = \dfrac{m_1m_2\,g\,(1 + \sin\theta)}{m_1 + m_2}
  • c.With m1=m2 m_1 = m_2 : a=(1−sin⁡25°) g2=(1−0.423)×9.82= a = \dfrac{(1 - \sin 25°)\,g}{2} = \dfrac{(1 - 0.423) \times 9.8}{2} = 2.83 m/s² (2.89 m/s² with g = 10), m2 m_2 falling and m1 m_1 moving up the slope.