A cook in a Bhaktapur kitchen knows that four cups of rice need about eight cups of water, and that a spoonful too much salt spoils the dal. A chemist in a fertilizer factory asks the same kind of question with far more at stake: how many tonnes of hydrogen does this much nitrogen need, how much ammonia will come out, and how much will be wasted? The answers come from counting atoms, and since atoms are far too small to count one by one, chemists count them by weighing, in the unit called the mole.
This unit starts with the laws, found by careful weighing two hundred years ago, that convinced chemists that atoms are real. It then builds the mole, the bridge between the atoms in an equation and the grams on a balance, and uses it to answer every “how much?” question of chemistry: how much product, how much is left over, and how much a real process actually gives.
2.1 Dalton’s atomic theory and its postulates
In 1808 the English chemist John Dalton (Unit 1) published a theory of atoms built on the facts and measurements known at the time: the laws of chemical combination below. Its postulates are:
- a.All matter is made of tiny, indivisible particles called atoms. The atom is the smallest unit of an element.
- b.Atoms of the same element are alike in mass and in their chemical and physical properties; atoms of different elements differ.
- c.Atoms combine chemically in simple whole-number ratios to form compound atoms, which we now call molecules.
- d.In a chemical reaction, atoms keep their identity: they are only separated, rearranged and joined in new ways to make new substances.
We now know that atoms can be split (Unit 3) and that atoms of one element can differ in mass (isotopes, Unit 1), but the postulates still explain every law of this unit.
2.2 Laws of stoichiometry
Stoichiometry (stoy-kee-OM-uh-tree) comes from two Greek words, stoicheion, element, and metron, measure: it is the measuring of elements. More exactly, it is the study of the quantities of substances that take part in chemical reactions. When cooking, we use just the right amount of salt or sugar to get the best taste without waste; in the same way, stoichiometry tells a chemist the right amounts of reactants to use, so that a reaction gives as much product as possible and wastes nothing. The word was coined in 1792 by the German chemist Jeremias Richter, whom you will meet below. Stoichiometry is the bridge between the tiny world of atoms and molecules and the world of grams and liters that we can measure.
Four laws, all found by weighing before anyone was sure atoms existed, describe how elements combine.
Law of conservation of mass
When methane burns,
there are 1 + 4 + 2 × 2 = 9 atoms in the reactants and 3 + 2 × 3 = 9 in the products. The number of atoms stays the same, so the total mass stays the same. This is why a chemical equation must be balanced: the same number of atoms of each element on both sides.
In general, if x g of A combines with y g of B, the mass of AB formed is x + y g:
For the burning of ethane:
The law of conservation of mass states:
In a chemical reaction, mass is neither created nor destroyed: the total mass of the products equals the total mass of the reactants.
It is also called the law of indestructibility of matter. In an open vessel the mass may seem to change, because a gas escapes or is taken in from the air; in a closed system it never does.
Law of definite proportions
Water from a tap in Kathmandu, from the Trishuli, or from melted Everest snow, once purified, always contains hydrogen and oxygen in the ratio 1 : 8 by mass. This idea, that a pure compound has a fixed composition, was put forward by the French chemist Joseph Proust (1754–1826), who analyzed copper carbonate made in the laboratory and found in nature and found it the same. The law of definite proportions (or law of constant composition) states:
A pure chemical compound always contains the same elements combined in the same fixed proportion by mass, whatever its source or method of preparation.
If compound AB is made in two ways, and p g of A combines with q g of B in the first and x g of A with y g of B in the second, then
Carbon dioxide made by burning carbon and carbon dioxide made by burning methane both contain carbon and oxygen in the ratio 12 : 32, that is 3 : 8:
Today this law seems obvious, but in the late 1700s there was no clear idea of what a compound was, and Proust argued for years with Claude Berthollet, who believed the composition of a compound could vary. Proust’s careful analyses won, and the law helped Dalton build his atomic theory. It has limits:
- a.It holds exactly for simple compounds. For very large molecules, such as proteins, or for polymers whose chains vary in length, a sample does not have one exact composition.
- b.It does not hold for non-stoichiometric compounds (also called berthollides, after Berthollet), solids whose crystals have some atoms missing in places. Wüstite, an iron oxide written FeO, really contains only 0.83 to 0.95 iron atoms for each oxygen atom, depending on how it was made.
- c.A compound made from different isotopes of an element has a slightly different composition by mass: water made with heavy hydrogen (deuterium) is about 20% hydrogen by mass, not 11%.
Law of multiple proportions
Dalton noticed that when two elements form more than one compound, the amounts of one that combine with a fixed amount of the other are always in simple ratios, and saw that atoms explain it at once: a compound can have one atom of oxygen per carbon atom, or two, but never one and a half. If masses and of element B combine with the same mass of element A in two compounds, then is a ratio of small whole numbers. The law of multiple proportions states:
When two elements combine to form more than one compound, the masses of one element that combine with a fixed mass of the other are in a ratio of small whole numbers.
Nitrogen and oxygen form several oxides. In each, take 14 g of nitrogen:
| Oxide | Formula | Mass of N (g) | Mass of O combining with 14 g of N (g) |
|---|---|---|---|
| nitrous oxide (dinitrogen oxide) | N₂O | 14 | 8 |
| nitric oxide (nitrogen monoxide) | NO | 14 | 16 |
| nitrogen dioxide | NO₂ | 14 | 32 |
| dinitrogen pentoxide | N₂O₅ | 14 | 40 |
The masses of oxygen, 8 : 16 : 32 : 40, are in the ratio 1 : 2 : 4 : 5, small whole numbers. Taking just two of them, NO and NO₂, the oxygen is 16 : 32 = 1 : 2.
Law of reciprocal proportions
The German chemist Jeremias Richter found in 1792 that when acids neutralize bases, the masses that react are linked from one pair to another. His idea, the law of reciprocal proportions, is about three elements that each combine with the other two.
Copper combines with sulphur to make copper sulphide, CuS, and with oxygen to make copper oxide, CuO; sulphur and oxygen also combine with each other, as in sulphur trioxide, SO₃.
| Elements | Compound | Ratio of masses |
|---|---|---|
| copper and sulphur | CuS | Cu : S = 63.5 : 32 |
| copper and oxygen | CuO | Cu : O = 63.5 : 16 |
| sulphur and oxygen | SO₃ | S : O = 32 : 48 |
The masses of sulphur and oxygen that combine with the same mass of copper (63.5 g) are 32 : 16 = 2 : 1. When sulphur and oxygen combine with each other in SO₃, the ratio is 32 : 48 = 2 : 3. The two ratios, 2 : 1 and 2 : 3, are not the same, but one is a simple multiple of the other: (2/1) ÷ (2/3) = 3.
Carbon, sulphur and oxygen give another example. CO₂ has 12 parts by mass of carbon to 32 of oxygen, and SO₂ has 32 parts of sulphur to 32 of oxygen. So with the same mass of oxygen (32), carbon and sulphur combine in the ratio 12 : 32 = 3 : 8. In carbon disulphide, CS₂, carbon and sulphur combine with each other in the ratio 12 : 64 = 3 : 16. Again 3 : 8 and 3 : 16 are simple multiples of each other (one is twice the other).
The law of reciprocal proportions states:
If two elements each combine with a fixed mass of a third element, the ratio of their masses is either the same as, or a simple multiple of, the ratio of their masses when they combine with each other.
It is also called the law of equivalent proportions, because the masses that combine are in the ratio of the elements’ equivalent masses (the mass of an element that combines with 1 g of hydrogen or 8 g of oxygen). Only a few elements combine with a third element and also with each other, so the law applies to fewer cases than the others.
Gay-Lussac’s law of gaseous volumes
The French chemist Joseph Louis Gay-Lussac (1778–1850), who once rose 7 km in a hydrogen balloon to sample the air, measured the volumes of gases that react. In 1808 he found that they are always in simple ratios. If the volumes of the gases in a reaction are , and , at the same temperature and pressure, then
where a, b and c are the numbers in front of the gases in the balanced equation.
Hydrogen and oxygen give steam:
2 volumes of hydrogen + 1 volume of oxygen give 2 volumes of steam: 2 : 1 : 2. So 100 mL of hydrogen, with oxygen to spare, gives 100 mL of steam (measured hot, at the same temperature and pressure). Notice that volumes need not add up: 3 volumes of gas became 2. It is mass that is conserved, not volume.
The law of gaseous volumes states:
When gases react, the volumes of the reacting gases and of any gaseous products are in a ratio of small whole numbers, provided they are measured at the same temperature and pressure.
2.3 Avogadro’s law and some deductions
A gas fills its container, so the volume of a gas is the volume of its container. More gas means more molecules, and at the same temperature and pressure, more volume. In 1811 the Italian physicist Amedeo Avogadro (1776–1856) saw what this meant for Gay-Lussac’s volumes. If equal volumes of gases always hold equal numbers of molecules, then 1 volume of hydrogen and 1 volume of chlorine giving 2 volumes of hydrogen chloride means that one molecule of hydrogen and one of chlorine give two molecules of hydrogen chloride. That is possible only if each hydrogen and chlorine molecule has two atoms, H₂ and Cl₂, which split and recombine:
This was Avogadro’s great insight: the particles of an element can be molecules of several atoms.
The law of Avogadro (first his hypothesis) states:
Equal volumes of all gases, at the same temperature and pressure, contain equal numbers of molecules.
So at a fixed temperature and pressure, , where V is the volume of the gas and N the number of its molecules. The kind of gas doesn’t matter: ammonia, chlorine and oxygen molecules have different shapes and masses, but the same volume of each, under the same conditions, holds the same number of molecules. In a gas the molecules are so far apart (about ten times their own size) that their size hardly matters.
For gases, the conditions must always be stated:
- STP (standard temperature and pressure), also called NTP (normal temperature and pressure): 0 °C (273 K) and 1 atm (760 mmHg). One mole of any gas occupies 22.4 L, the molar volume.
- RTP (room temperature and pressure): 25 °C (298 K) and 1 atm. One mole occupies 24.5 L. (Many books use 24.0 L for room conditions, which is the value at 20 °C: use the value a question gives.)
So, at STP, 22.4 L of any gas holds 6.022 × 10²³ molecules (1 mole of gas), and 44.8 L holds 2 × 6.022 × 10²³ = 1.204 × 10²⁴ molecules (2 moles).
Berzelius’s hypothesis
The Swedish chemist Jöns Jacob Berzelius suggested a different rule: “equal volumes of all gases, under the same conditions of temperature and pressure, contain equal numbers of atoms.” Test it on hydrogen and chlorine. If 1 volume of hydrogen has n atoms and 1 volume of chlorine n atoms, then 2 volumes of hydrogen chloride would hold 2n compound atoms, each made from half an atom of hydrogen and half an atom of chlorine. That would mean cutting atoms in half, against Dalton’s theory that atoms can’t be divided. So Berzelius’s hypothesis was rejected, and Avogadro’s, with its molecules of two atoms, kept.
Deductions from Avogadro’s law
1. Molecular mass = 2 × vapor density. The vapor density (VD) of a gas is how many times denser it is than hydrogen, at the same temperature and pressure:
(density = mass ÷ volume, and the volumes are the same). If volume V holds n molecules of each gas (Avogadro’s law),
since a hydrogen molecule has two atoms. The mass of one molecule divided by the mass of one hydrogen atom is the molecular mass (on the scale where H = 1). So
Vapor density, a ratio of two densities, has no unit. Carbon dioxide (Mᵣ 44) has a VD of 22: it is 22 times as dense as hydrogen, and heavier than air (Mᵣ about 29), which is why it collects in low places and can suffocate people in old wells and pits.
2. Molar mass and molar volume. One liter of hydrogen at STP has a mass of 0.0899 g. Then
(using the more exact molecular mass of hydrogen, 2.016). That is,
The mass of one mole of a substance is its molar mass, and the volume one mole of a gas occupies is its molar volume. So 1 mole of any gas occupies 22.4 L at STP. A gas expands when it is heated, so at room temperature the molar volume is larger, about 24 L:
3. Molar volume and the number of particles. Measurements show that 22.4 L of any gas at STP contains 6.022 × 10²³ molecules. So 1 mole of gas = 22.4 L at STP = 6.022 × 10²³ molecules. This number is the same for every substance, and is called the Avogadro constant, . For example, 2 g of hydrogen (1 mole) contains 6.022 × 10²³ molecules of hydrogen, and 100 g of calcium carbonate (1 mole) contains 6.022 × 10²³ formula units of CaCO₃.
4. The molecular formula of a gas from its volumes. Avogadro’s law turns volumes into numbers of molecules.
At the same temperature and pressure, 1 L of oxygen and 1 L of carbon dioxide have:
Pick an answer to see why.
2.4 Mole and its relation with mass, volume and number of particles
Have you ever tried to count the grains of sugar in a packet? It is hardly possible: the grains are too small and too many. Chemists have the same problem with atoms, ions and molecules, which are far smaller than a grain of sugar. The solution is the one a shopkeeper uses for nails or rice: count by weighing. A kilogram of nails contains a known number of nails, and a known mass of a substance contains a known number of atoms.
Mole in terms of number
12 g of carbon and 63.5 g of copper look nothing alike: a small heap of black powder, a larger lump of reddish metal. Yet they contain the same number of atoms, because a copper atom is 63.5/12 times as heavy as a carbon atom. That number is the chemist’s counting unit, the mole.
| Unit | Number |
|---|---|
| 1 pair | 2 |
| 1 dozen | 12 |
| 1 gross | 144 (a dozen dozen) |
| 1 ream | 500 |
| 1 mole | 6.022 × 10²³ |
A dozen and a ream are no use for atoms, which come in such huge numbers. So chemists count them in moles. The mole (unit symbol mol) is the amount of substance that contains as many particles (atoms, molecules, ions or electrons) as there are atoms in exactly 12 g of carbon-12. That number, 6.022 × 10²³, is the Avogadro constant (or Avogadro’s number), , named in honor of Amedeo Avogadro:
To change moles into particles, multiply by ; to change particles into moles, divide:
Equal numbers of moles contain equal numbers of particles: 12 g of carbon (1 mol) and 63.5 g of copper (1 mol) each contain 6.022 × 10²³ atoms.
Mole in terms of mass
The mass of 1 mole of any substance, in grams, is numerically equal to its atomic mass or molecular mass. This is why 6.022 × 10²³ was chosen: it is the number of amu in a gram.
| Substance | Atomic or molecular mass | Mass of 1 mol |
|---|---|---|
| carbon, C | 12 | 12 g |
| iron, Fe | 55.8 | 55.8 g |
| carbon dioxide, CO₂ | 44 | 44 g |
| sugar (sucrose), C₁₂H₂₂O₁₁ | 342 | 342 g |
where M is the molar mass, the mass of 1 mol, in g/mol. With atomic mass, the number of moles of atoms is also called the number of gram atoms; with molecular mass, the number of gram molecules:
So one gram atom is 1 mol of atoms, and one gram molecule is 1 mol of molecules.
Every calculation goes through the mole: from mass to moles and back, from moles to particles and back. Sugar, C₁₂H₂₂O₁₁, has a molar mass of 342 g/mol, so 342 g of sugar is 1 mol, 6.022 × 10²³ molecules; 55.8 g of iron is 1 mol, 6.022 × 10²³ atoms.
Mole in terms of volume
At STP, 6.022 × 10²³ molecules (1 mol) of any gas occupy 22.4 L, the molar volume: so 1 mol of gas = 22.4 L, and 0.5 mol = 11.2 L. At room temperature a gas expands, and 1 mol occupies about 24 L (24.5 L at 25 °C).
Like mass and number of particles, the volume of a gas can be turned into moles, and back, using 22.4 L at STP.
Which contains the largest number of molecules?
Pick an answer to see why.
2.5 Calculations based on mole concept
The mole connects everything a chemist can measure. Mass is weighed on a balance, the volume of a gas is read off a gas jar or syringe, and the number of particles is what the equation counts; the mole turns any one of them into the others:
Every calculation of this kind has the same two steps: first change what is given into moles, then change the moles into what is asked for.
Chemical calculations based on chemical equations
Using just the right amounts of reactants keeps up the quantity and quality of a product and saves costly materials from going to waste, so chemists in industry calculate amounts all the time. In a balanced chemical equation, the coefficients (the numbers in front of the formulas) give the ratio of the moles of the reactants and products, never the ratio of their masses. For
moles of A₂ : moles of B₂ : moles of AB = 1 : 1 : 2.
2.6 Limiting reactant and excess reactant
In a reaction, the reactants are seldom mixed in exactly the amounts the equation needs. One of them is used up first, and the reaction then stops: that reactant is the limiting reactant (or limiting reagent), because it limits the amount of product. What is left of the others is the excess reactant (excess reagent). Knowing the limiting reactant matters in chemistry and in industry:
- a.It tells us the most product a reaction can give.
- b.It helps us avoid wasting chemicals, by using them efficiently.
- c.It helps avoid unwanted by-products and waste.
- d.It helps make reactions cheaper and kinder to the environment: a factory usually makes the cheaper reactant the excess one, so that all of the costly one is used.
How to find the limiting reactant. Change each given amount into moles. Then either take one reactant and work out how much of the other it needs, or divide each reactant’s moles by its coefficient in the equation: the reactant with the smaller result is the limiting reactant.
Take 2 mol of A₂ and 3 mol of B₂ reacting:
1 mol of A₂ needs 1 mol of B₂, so 2 mol of A₂ needs 2 mol of B₂. There are 3 mol of B₂, more than needed, so B₂ is in excess and A₂ is the limiting reactant. By the second way: A₂, 2 ÷ 1 = 2; B₂, 3 ÷ 1 = 3; A₂’s number is smaller.
The excess reactant left over is
In , 4 g of hydrogen is mixed with 40 g of oxygen. Which is the limiting reactant?
Pick an answer to see why.
2.7 Theoretical yield, experimental yield and percentage yield
When limestone is heated strongly in a lime kiln, it breaks down into quicklime (calcium oxide) and carbon dioxide:
So 1000 g of limestone should give 560 g of quicklime. Suppose a kiln operator heats 1 kg of limestone and gets only 500 g of quicklime. The 560 g is the theoretical yield of the process, and the 500 g its experimental (or actual) yield.
The theoretical yield is the most product a reaction can give, worked out from the equation with the limiting reactant. It is an ideal value: the amount you would get if every bit of the limiting reactant turned into product. In practice, the amount obtained is almost always less, for reasons such as:
- the reaction does not go to completion (some reactions stop partway, as the Haber process does, or are too slow);
- side reactions turn some reactants into other products;
- some product is lost while it is separated, filtered, washed, dried or moved;
- the reactants are impure.
The amount of product actually obtained is the experimental yield or actual yield. The percentage yield measures how efficient the process is:
The higher the percentage yield, the more efficient the process. For the lime kiln,
Calculation of empirical and molecular formula from percentage composition
You learned in Unit 1 what empirical and molecular formulas are, and how to find a compound’s percentage composition from its formula. Here the question goes the other way: a chemist analyzes a new compound, finds the percentage of each element in it, and wants its formula. The mole does the job.
The empirical formula is the simplest formula of a compound: it gives the simplest whole-number ratio of the atoms in it. To find it:
- a.Write the percentage of each element in the compound.
- b.Change each percentage into moles of atoms: assume 100 g of the compound, so 20% means 20 g, and divide by the atomic mass.
- c.Write the ratio of the moles of the elements.
- d.Divide each number of moles by the smallest of them, and round to the nearest whole number. (If a number ends near .5, .33 or .25, multiply them all by 2, 3 or 4 first: 1 : 1.5 becomes 2 : 3.)
- e.Write the empirical formula.
- f.To find the molecular formula, use
Project work
Exercise
Choose the correct option
- Two oxides of a metal contain 27.6% and 30.0% of oxygen by mass. If the formula of the first oxide is M₃O₄, what is the formula of the second?
Pick an answer to see why.
- What is the definition of a mole?
Pick an answer to see why.
- How many moles of oxygen atoms are there in 0.5 mol of oxygen gas?
Pick an answer to see why.
- How many molecules are there in 88 g of carbon dioxide?
Pick an answer to see why.
- How many moles of water are there in 1.8 mL of water?
Pick an answer to see why.
- Which of the following defines a limiting reactant?
Pick an answer to see why.
- The atomic masses of two elements A and B are 20 and 40. If x g of A contains y atoms, how many atoms are there in 2x g of B?
Pick an answer to see why.
- What is the ratio of the volumes occupied by 1 mol of O₂ and 1 mol of O₃ under the same conditions?
Pick an answer to see why.
- How many moles of oxygen are needed to burn 0.5 mol of methane completely to water and carbon dioxide?
Pick an answer to see why.
- When 4.8 g of magnesium reacts with excess hydrochloric acid, what volume of hydrogen gas is produced at STP?
Pick an answer to see why.
- A reaction was expected to give 12 g of a product, but only 9 g was obtained. What is the percentage yield?
Pick an answer to see why.
- In the reaction , 16 mol of A reacts with 18 mol of B. How many moles of D are produced?
Pick an answer to see why.
Answer these questions
State the following laws, with an example of each:
- a.the law of multiple proportions
- b.the law of reciprocal proportions
- c.Gay-Lussac’s law of gaseous volumes
Answer
State Avogadro’s law. Write any four of its applications.
Answer
Differentiate between:
- a.limiting reactant and excess reactant
- b.the law of conservation of mass and the law of constant composition
- c.experimental yield and theoretical yield
Answer
Identify the law shown by each set of data, and show that the data follow it.
- a.Experiment 1: carbon dioxide (CO₂) contains 27.27% carbon, carbon disulphide (CS₂) 15.79% carbon, and sulphur dioxide (SO₂) 50% sulphur.
- b.Experiment 2: copper sulphide (CuS) contains 66.49% copper, copper oxide (CuO) 79.87% copper, and sulphur trioxide (SO₃) 40% sulphur.
- c.Experiment 3: two oxides of carbon contain 42.9% and 27.3% carbon.
Answer
- a.What is atomic mass? Why is the atomic mass of many elements a fraction?
- b.Equal numbers of sodium atoms and aluminium atoms are put in the two pans of a balance, A and B. Pan B hangs lower than pan A. Which pan holds which atoms? Give a reason.
Answer
For the reaction , Aman reacts 6.3 g of sulphur with 10.0 g of oxygen.
- a.Calculate the number of moles of each reactant.
- b.Which is the limiting reactant?
- c.Find the mass of SO₃ produced.
Answer
Sneha has two beakers of gas: one holds 0.60 mol of hydrogen, and the other 1.50 mol of helium.
- a.Calculate the number of molecules and the number of atoms in each.
- b.Which gas would occupy the larger volume at STP? Why?
Answer
The molecular models show methane burning in oxygen to give carbon dioxide and water.
- a.Write the balanced chemical equation shown by the models.
- b.Find the ratio of the numbers of moles of methane and oxygen in the equation.
- c.Calculate the number of moles of O₂ needed for the complete combustion of 0.5 mol of methane.
Answer
Carbon dioxide is made in the laboratory from limestone and hydrochloric acid. Shreya mixes 68.1 g of solid CaCO₃ with 51.6 g of HCl.
- a.Write the balanced chemical equation for the reaction.
- b.Identify the limiting reactant.
- c.What mass and volume of CO₂ are produced at STP?
Answer
In the reaction , Anish uses 200.0 g of each reactant (Na = 23, Br = 79.9, P = 31).
- a.Which is the limiting reactant?
- b.What is the theoretical yield of each product, in grams?
- c.How much of the excess reactant remains unreacted, assuming a 100% yield?
- d.If the percentage yield is only 70.0%, what is the actual yield of each product?
Answer
When 28 g of N₂ reacts with excess H₂, only 30 g of ammonia is produced. What is the percentage yield? How can the percentage yield be increased?
Answer
Sodium reacts violently with water, giving hydrogen and sodium hydroxide. How many grams of hydrogen are produced by 400 mg of sodium?
Answer
Magnesium hydroxide, Mg(OH)₂, is used as an antacid. 0.5 mol of it is mixed with 0.2 mol of HCl:
- a.Find the limiting reactant.
- b.What mass of each reactant is used?
- c.Calculate the mass of magnesium chloride produced.
- d.Find the mass of H₂SO₄ that would react completely with the 0.5 mol of Mg(OH)₂.
Answer
Methanol is used as a fuel for racing cars. It burns in the engine according to the equation
Dolma mixes 40.0 g of methanol with 46.0 g of O₂.
- a.What mass of CO₂ is produced?
- b.Why is methanol used as a fuel?
- c.Calculate the mass of methanol that burns completely in 0.5 kg of oxygen.
Answer
A chemist analyzes two compounds of carbon and oxygen. In the first, 2.00 g of carbon is combined with 2.66 g of oxygen; in the second, 2.00 g of carbon is combined with 5.32 g of oxygen.
The textbook gives 1.33 g of carbon, but the book’s numbers don’t work: they give C : O ratios of 2 : 3 and 1 : 3, C₂O₃ and CO₃, which are not stable compounds of carbon. With 2.00 g of carbon the same masses of oxygen give carbon monoxide and carbon dioxide.
- a.Calculate the number of moles of each kind of atom in both compounds.
- b.Find the empirical formulas of the two compounds.
- c.How do the results support the law of multiple proportions?
Answer
Three containers, A, B and C, each hold 22.4 L of a gas at STP: A hydrogen, B oxygen and C carbon dioxide.
- a.Find the number of moles of gas in A.
- b.Calculate the mass of gas in container B.
- c.Find the number of gas molecules in container C.
- d.Find the number of atoms in A.
- e.Do these containers illustrate Avogadro’s law? Explain.
Answer
The first step of the Ostwald process for making nitric acid is the reaction of ammonia with oxygen, giving nitric oxide (NO) and water.
- a.Write the balanced chemical equation for the reaction.
- b.Find the mass of water produced when 1 kg of ammonia reacts.
- c.If 0.1 mol of each reactant is mixed, which is the limiting reactant?
- d.Calculate the volume of NO gas produced at NTP if 0.1 mol of each reactant reacts.
Answer
During combustion, nitrogen in the air reacts with oxygen at high temperatures to form nitrogen monoxide (NO), which reacts with more oxygen to form brown nitrogen dioxide gas (NO₂). Suppose 3.13 g of nitrogen monoxide reacts with 4.16 g of oxygen.
- a.Write the balanced chemical equation for the reaction.
- b.Which is the limiting reactant? Why?
- c.What mass of nitrogen dioxide is formed?
- d.Which reactant is left in excess, and what mass of it?
- e.What is the environmental impact of this reaction?
Answer
Nikita heats 56.6 g of calcium with 30.5 g of nitrogen to form calcium nitride. The reaction has a 93.0% yield.
- a.Write the balanced chemical equation for the reaction.
- b.Find the number of moles of each reactant.
- c.What does it mean that the percentage yield of the reaction is 93%?
- d.Find the mass of solid calcium nitride formed.
Answer
Milan adds aluminium sulphide (48.0 g) to water (32.0 g):
- a.Balance the chemical equation.
- b.Define limiting reactant, and identify it in this reaction.
- c.What mass of Al(OH)₃ is produced?
- d.What mass of the excess reactant remains after the reaction is complete?
Answer
Hydrogen sulphide breaks down into hydrogen and sulphur at 2000 °C:
When Bibek heated 0.250 g of hydrogen sulphide, 13 mg of H₂ was produced.
- a.Why is 13 mg called the experimental yield of the process? Convert it into a volume at STP.
- b.Calculate the theoretical yield from the equation.
- c.Find the percentage yield of the process.
- d.Write any two ways by which the percentage yield of the reaction can be increased.
Answer
Kushal prepares oxygen gas in the laboratory by heating potassium chlorate (KClO₃) in a hard-glass test tube, with a little manganese dioxide, and the gas is collected over water in a gas jar: x g of KClO₃ gives 2.24 L of O₂, measured at STP.
- a.Write the balanced chemical equation for the decomposition of KClO₃ in the presence of heat.
- b.Find the number of moles of oxygen produced in the gas jar.
- c.What is the value of x that gives this amount of oxygen?
- d.If 13 g of KClO₃ gives the same volume of oxygen under the same conditions, calculate the percentage yield of the reaction.
- e.Calculate the mass of magnesium that reacts completely with the oxygen produced.
Answer
Solve these numerical problems.
- a.Calculate the mass of 6.022 × 10²³ molecules of NH₄Cl.
- b.An atom of an element Y has a mass of 6.644 × 10⁻²³ g. Calculate the number of gram atoms in 40 kg of it.
- c.If a mole contained 1 × 10²⁴ particles, what would be the mass of (i) one mole of oxygen, O₂ (ii) a single oxygen molecule?
- d.Pragya weighs a steel cylinder of compressed oxygen and finds its mass is 1027.8 g. After using some of the oxygen in an experiment, the cylinder’s mass is 1023.2 g. How many moles of oxygen gas were used?
- e.Calculate the mass of aluminium that has the same number of atoms as 6.35 g of copper.
- f.The mass of a diamond is given in carats; one carat is 200 mg. A pure diamond is made entirely of carbon atoms. How many carbon atoms make up a 1.00 carat diamond?
- g.Element X combines with element Y to form two compounds. In the first, 12 g of X combines with 8 g of Y; in the second, 18 g of X combines with 24 g of Y. Show that these follow the law of multiple proportions.
- h.CO, CO₂ and CₓOᵧ are oxides of carbon. A 2.50 g sample of CₓOᵧ contains 1.32 g of carbon and 1.18 g of oxygen. Find x and y.
- i.In an experiment, 4.70 g of H₂ reacts with excess N₂, and 12.5 g of NH₃ is formed. What is the percentage yield?
- j.The equation for a reaction in the making of methanol is . What is the most methanol that can be formed from 2 mol of carbon dioxide and 3 mol of hydrogen?
- k.Methyl salicylate (oil of wintergreen, the smell of many pain-relief balms) contains carbon, hydrogen and oxygen. When a 5.287 g sample is burned in excess oxygen, 12.24 g of carbon dioxide and 2.522 g of water are formed. What is its empirical formula?
Answer
Printable PDFs
- Study notes 3 pages
- Worksheet 4 pages Answer key
Quiz yourself: Matter, Atoms and Reactions, Grades 5–12 →
Practice every question in the book, and keep track of the ones you miss →
A companion to your textbook, not a replacement for it: study from the book your school uses, and where the two differ, follow your teacher. Found a mistake? Please tell us.
