Skip to content

← Grade 11 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

13 questions

Unit 10 · Thermal Expansion

Answer these questions

16.
  • a.Why does a bimetallic strip bend to one side when heated?
  • b.A solid sphere is heated from θ1 \theta_1 to θ2 \theta_2 . Find a relation between its final and initial diameters.
  • c.A hole 2 cm in diameter is drilled through a piece of steel at 30 °C. What happens to the diameter of the hole when the steel is heated to 80 °C? (α for steel = 1.2 × 10⁻⁵ °C⁻¹)
Hint

c. The hole grows as if it were filled with steel.

Answer
  • a.Its two metals have different linear expansivities but are joined along their whole length. Heated, one gets longer than the other; they can’t slide apart, so the strip curves, the more expanding metal on the outside (the longer arc).
  • b.The diameter is a length, so it grows with the linear expansivity α of the material:

d2=d1[1+α(θ2−θ1)] d_2 = d_1\left[1 + \alpha(\theta_2 - \theta_1)\right]
(Its volume grows as V2=V1(1+3αΔθ) V_2 = V_1(1 + 3\alpha\Delta\theta) , which agrees: d3 d^3 grows by about 3αΔθ 3\alpha\Delta\theta .)
c. The hole gets bigger: Δd=dαΔθ=2×1.2×10−5×50=0.0012 \Delta d = d\alpha\Delta\theta = 2 \times 1.2 \times 10^{-5} \times 50 = 0.0012 cm, so its diameter becomes 2.0012 cm.

17.
  • a.Define the coefficients of linear and cubical expansion of a material.
  • b.A solid cube of metal is heated. Derive the relation between its coefficient of linear expansion and its coefficient of cubical expansion.
  • c.Would the coefficient of cubical expansion change if the same solid cube were made into a hollow cube?
Answer
  • a.Linear expansivity α: the increase in length per unit original length per degree rise in temperature, α=l2−l1l1(θ2−θ1) \alpha = \dfrac{l_2 - l_1}{l_1(\theta_2 - \theta_1)} . Cubical expansivity γ: the increase in volume per unit original volume per degree rise in temperature, γ=V2−V1V1(θ2−θ1) \gamma = \dfrac{V_2 - V_1}{V_1(\theta_2 - \theta_1)} . Both in K⁻¹.
  • b.A cube of side l1 l_1 has V1=l13 V_1 = l_1^3 . Heated by Δθ, its side becomes l2=l1(1+αΔθ) l_2 = l_1(1 + \alpha\Delta\theta) , and its volume V2=l23=V1(1+γΔθ) V_2 = l_2^3 = V_1(1 + \gamma\Delta\theta) . So

l13(1+αΔθ)3=l13(1+γΔθ) l_1^3(1 + \alpha\Delta\theta)^3 = l_1^3(1 + \gamma\Delta\theta)
1+3αΔθ+3α2Δθ2+α3Δθ3=1+γΔθ 1 + 3\alpha\Delta\theta + 3\alpha^2\Delta\theta^2 + \alpha^3\Delta\theta^3 = 1 + \gamma\Delta\theta .
α is very small, so the terms in α² and α³ can be neglected: 3αΔθ=γΔθ 3\alpha\Delta\theta = \gamma\Delta\theta , and γ = 3α.
c. No. γ is a property of the material, and a hollow cube of the same material grows exactly as the solid one does: its hollow expands as if it were filled with the same metal.

18.
  • a.A liquid is heated in a flask as in the first figure above. Identify the real and apparent expansion of the liquid.
  • b.Show that γr=γa+γg \gamma_r = \gamma_a + \gamma_g , where the symbols have their usual meanings.
  • c.A glass flask of volume 200 cm³ is filled up to 180 cm³ with mercury at 0 °C. How much space is left above the mercury when the flask and mercury are heated to 60 °C? (Cubical expansivity of glass = 2.7 × 10⁻⁵ °C⁻¹, of mercury = 18 × 10⁻⁵ °C⁻¹.)
  • d.From the bimetallic thermostat in the second figure above:
  • i.Which expands more for the same rise in temperature, brass or steel?
  • ii.Why does the strip bend towards the steel side?
  • iii.You have two rods, one brass and one steel, each 1 m long with a cross-section of 1 m². To make them reach the same final length, which must be heated through more degrees?
  • e.A glass tube 133 cm long, of uniform cross-section, is to be partly filled with mercury so that the volume of the tube not occupied by mercury stays the same at all temperatures. The cubical expansivities of glass and mercury are 0.000 026 °C⁻¹ and 0.000 182 °C⁻¹. Find the length of the mercury column.
Hint

e. For the empty part to stay the same, the mercury must grow by exactly as much as the tube’s inside volume does.

Answer
  • a.L₁ → L₂, the fall: the expansion of the flask. L₂ → L₃: the real expansion of the liquid. L₁ → L₃, the net rise you see: the apparent expansion.
  • b.Let the tube’s cross-section be a a . From the levels, L2L3=L1L3+L2L1 L_2L_3 = L_1L_3 + L_2L_1 ; multiplying by a a , ΔVr=ΔVa+ΔVg \Delta V_r = \Delta V_a + \Delta V_g . With ΔVr=γrV0Δθ \Delta V_r = \gamma_rV_0\Delta\theta , ΔVa=γaV0Δθ \Delta V_a = \gamma_aV_0\Delta\theta and ΔVg=γgV0Δθ \Delta V_g = \gamma_gV_0\Delta\theta , dividing by V0Δθ V_0\Delta\theta gives γr=γa+γg \gamma_r = \gamma_a + \gamma_g .
  • c.Inside volume of the flask at 60 °C: 200(1+2.7×10−5×60)=200.324 200(1 + 2.7 \times 10^{-5} \times 60) = 200.324 cm³.

Mercury at 60 °C: 180(1+18×10−5×60)=181.944 180(1 + 18 \times 10^{-5} \times 60) = 181.944 cm³.
Space left: 200.324−181.944= 200.324 - 181.944 = 18.4 cm³ (it was 20 cm³ at 0 °C).

  • d.i. Brass (α ≈ 1.9 × 10⁻⁵ K⁻¹, against steel’s 1.1 × 10⁻⁵ K⁻¹).
  • ii.The brass grows longer than the steel it is joined to. The only way two joined strips of different lengths can fit together is to curve, with the longer brass on the outside of the arc and the shorter steel on the inside: so the strip bends towards the steel side.
  • iii.Steel. For the same increase in length from the same 1 m, Δl=lαΔθ \Delta l = l\alpha\Delta\theta needs a larger Δθ where α is smaller. Steel must be heated about 1.9/1.1 ≈ 1.7 times as many degrees as brass. (The cross-section doesn’t matter.)
  • e.Let the mercury column be x x cm long, in a tube of cross-section a a . The empty part stays the same if the mercury’s growth equals the tube’s:

x a γHg Δθ=133 a γg Δθ⇒x=133×0.000 0260.000 182=133×17=19 cm x\,a\,\gamma_{\text{Hg}}\,\Delta\theta = 133\,a\,\gamma_g\,\Delta\theta \quad\Rightarrow\quad x = 133 \times \frac{0.000\,026}{0.000\,182} = 133 \times \frac{1}{7} = \textbf{19 cm}

19.
  • a.A physics teacher asks a student to measure the real expansivity of mercury. What experiment can measure it without taking the expansion of the vessel into account?
  • b.Using the figure above, show that γ=h2−h1h1Δθ \gamma = \dfrac{h_2 - h_1}{h_1\Delta\theta} .
  • c.In such an apparatus, the liquid column is 65 cm high at 0 °C and 66.18 cm high at 100 °C. Find the real expansivity of the liquid.
Answer
  • a.Dulong and Petit’s balanced-column method (10.12): a U-tube of the liquid with one limb cold and the other hot. It compares the columns by their pressures, which depend only on height and density, not on the width of the tube, so the glass’s expansion doesn’t enter.
  • b.At equilibrium, the pressures at the bottoms of the two columns are equal: ρ1gh1=ρ2gh2 \rho_1gh_1 = \rho_2gh_2 , so h1h2=ρ2ρ1 \dfrac{h_1}{h_2} = \dfrac{\rho_2}{\rho_1} . The density at the higher temperature is ρ2=ρ11+γΔθ \rho_2 = \dfrac{\rho_1}{1 + \gamma\Delta\theta} . So h1h2=11+γΔθ \dfrac{h_1}{h_2} = \dfrac{1}{1 + \gamma\Delta\theta} , h1+h1γΔθ=h2 h_1 + h_1\gamma\Delta\theta = h_2 , and γ=h2−h1h1Δθ \gamma = \dfrac{h_2 - h_1}{h_1\Delta\theta} .
  • c.γ=66.18−6565×100=1.186500=1.82×10−4 K−1 \gamma = \frac{66.18 - 65}{65 \times 100} = \frac{1.18}{6500} = \textbf{1.82} \times \mathbf{10^{-4}} \textbf{ K}^{\mathbf{-1}}

That is mercury’s own real expansivity.

20.
  • a.A brass rod measured with an aluminium scale reads shorter on a hot summer day than on a cold winter day. Why?
  • b.A disc has a hole at its center. When the disc is heated, what happens to the diameter of the hole?
  • c.A one-rupee coin has a diameter of 2.0 cm at 20 °C. It is made of an alloy (mostly copper) whose linear expansivity is 1.76 × 10⁻⁵ K⁻¹. What is its diameter i. on a hot day in Nepalgunj (48 °C), ii. on a cold night in the mountains of the Annapurna range (−23 °C)?
Answer
  • a.Aluminium expands more than brass (about 2.3 against 1.9 × 10⁻⁵ K⁻¹). On a hot day both are longer, but the scale’s centimeters have grown more than the rod, so fewer of them fit along it: the reading is smaller. (On a cold day the reverse.)
  • b.It increases, in the same proportion as the disc’s metal: the hole grows as if it were filled with the same metal.
  • c.i. Δθ=48−20=28 \Delta\theta = 48 - 20 = 28 K: d=2.0×(1+1.76×10−5×28)=2.0×1.000 493= d = 2.0 \times (1 + 1.76 \times 10^{-5} \times 28) = 2.0 \times 1.000\,493 = 2.000 99 cm.
  • ii.Δθ=−23−20=−43 \Delta\theta = -23 - 20 = -43 K: d=2.0×(1−1.76×10−5×43)=2.0×0.999 243= d = 2.0 \times (1 - 1.76 \times 10^{-5} \times 43) = 2.0 \times 0.999\,243 = 1.998 49 cm.

Between Nepalgunj and the Annapurnas, the coin changes by about 0.025 mm, a quarter of the thickness of a sheet of paper.

21.
  • a.Two rods of the same size, one steel and one aluminium, are heated through the same rise in temperature. The aluminium rod expands more. Why?
  • b.The two rods are joined along their length, so that the pair can bend when heated evenly. Explain what happens, with a diagram.
  • c.Explain, with examples, how differential expansion is seen and used in everyday life.
  • d.A steel rod and an aluminium rod, each 1 m long, are heated through the same rise in temperature (α for steel 1.2 × 10⁻⁵ K⁻¹, for aluminium 2.3 × 10⁻⁵ K⁻¹). Then they are cooled back to their first temperature and joined end to end. What is the length of the combined rod?
Answer
  • a.Aluminium has a larger linear expansivity (2.3 × 10⁻⁵ against 1.2 × 10⁻⁵ K⁻¹): for each degree, each meter of aluminium grows by about twice as much as each meter of steel. The forces between aluminium atoms are weaker and less stiff, and their spacing grows more with the same increase in vibration.
  • b.They form a bimetallic strip (the figure in 10.9). Heated, the aluminium tries to grow about twice as much as the steel; since they are joined, the pair curves into an arc with the aluminium on the outside (convex side) and the steel on the inside. Cooled below the starting temperature, it curves the other way.
  • c.A thermostat in an iron, rice cooker, water heater or aquarium heater: a bimetallic strip bends away from its contact when hot and cuts the current. Circuit breakers (MCBs): a strip heated by too much current bends and trips the switch. Dial thermometers (in ovens and for meat): a coiled bimetallic strip turns a pointer. Compensated pendulums use zero differential expansion to keep a constant length. Its harmful side: a thick glass cracking when hot water is poured in (the inside expands before the outside), and filling materials in teeth must expand like the tooth.
  • d.2 m. After cooling back to the starting temperature, each rod contracts to exactly its original length, 1 m. Joined end to end: 1 m + 1 m = 2 m. (The expansivities don’t matter.)

Numerical problems

22.

The distance between two points A and B on a railway is 625 km. Find the total space that must be left between the rails to allow for a change of temperature from 36 °F in winter to 117 °F in summer. (Linear expansivity of iron = 12 × 10⁻⁶ °C⁻¹.)

Hint

Convert the temperature change to Celsius degrees: a change of 9 °F is a change of 5 °C.

Answer

Δθ=117−36=81 \Delta\theta = 117 - 36 = 81 °F =81×59=45 = 81 \times \dfrac{5}{9} = 45 °C.
Δl=lαΔθ=625×103×12×10−6×45=337.5 m \Delta l = l\alpha\Delta\theta = 625 \times 10^3 \times 12 \times 10^{-6} \times 45 = \textbf{337.5 m}
Spread along 625 km of track in thousands of small gaps.

23.

A brass rod 0.40 m long and a steel rod 0.60 m long, both at 0 °C, are heated to 85 °C. Both grow by the same amount. Find the linear expansivity of brass (α for steel = 12 × 10⁻⁶ °C⁻¹).

Answer

Equal growths: lbαbΔθ=lsαsΔθ l_b\alpha_b\Delta\theta = l_s\alpha_s\Delta\theta , so
αb=lsαslb=0.60×12×10−60.40=18×10−6 °C−1 \alpha_b = \frac{l_s\alpha_s}{l_b} = \frac{0.60 \times 12 \times 10^{-6}}{0.40} = \textbf{18} \times \mathbf{10^{-6}} \textbf{ °C}^{\mathbf{-1}}
(The 85 °C isn’t needed.)

24.

Find the temperature at which wood will just sink in benzene. At 0 °C the density of benzene is 9 × 10² kg/m³ and its cubical expansivity 1.2 × 10⁻³ K⁻¹; the density of the wood is 8.8 × 10² kg/m³ and its cubical expansivity 1.5 × 10⁻⁴ K⁻¹.

Hint

The wood just sinks when the two densities become equal. Write each density at θ with ρ=ρ0/(1+γθ) \rho = \rho_0/(1 + \gamma\theta) .

Answer

At θ °C:
ρbenzene=9001+1.2×10−3θ,ρwood=8801+1.5×10−4θ \rho_{\text{benzene}} = \frac{900}{1 + 1.2 \times 10^{-3}\theta}, \qquad \rho_{\text{wood}} = \frac{880}{1 + 1.5 \times 10^{-4}\theta}
Set them equal and cross-multiply:
900(1+1.5×10−4θ)=880(1+1.2×10−3θ) 900(1 + 1.5 \times 10^{-4}\theta) = 880(1 + 1.2 \times 10^{-3}\theta)
900+0.135θ=880+1.056θ 900 + 0.135\theta = 880 + 1.056\theta
20=0.921θ⇒θ= 20 = 0.921\theta \Rightarrow \theta = 21.7 °C (about 295 K).
Below this the wood is less dense and floats; above it, the benzene is less dense and the wood sinks.

25.

The markings on an aluminium ruler and a brass ruler are exactly in line at 0 °C. How far apart will their 20.0 cm marks be at 100 °C, if their left-hand ends are kept exactly in line? (Take α from the table in 10.3: aluminium 2.3 × 10⁻⁵ °C⁻¹, brass 1.9 × 10⁻⁵ °C⁻¹.)
The textbook prints no expansivities for this question, so the book’s numbers don’t work as given; with the table’s values it gives the book’s answer, 0.008 cm.

Answer

Each 20.0 cm mark moves out by lαΔθ l\alpha\Delta\theta :
aluminium: 20.0×2.3×10−5×100=0.046 20.0 \times 2.3 \times 10^{-5} \times 100 = 0.046 cm;
brass: 20.0×1.9×10−5×100=0.038 20.0 \times 1.9 \times 10^{-5} \times 100 = 0.038 cm.
They are 0.046−0.038= 0.046 - 0.038 = 0.008 cm apart (the aluminium mark farther out), less than a tenth of a millimeter.

26.

An underground tank with a capacity of 1700 liters (1.70 m³) is filled with ethanol at 19 °C. The ethanol cools to the temperature of the tank and the ground, 10 °C. How much air space will there be above the ethanol? (Take the tank’s volume as unchanged; γ for ethanol = 75 × 10⁻⁵ K⁻¹.)

Answer

ΔV=VγΔθ=1.70×75×10−5×9= \Delta V = V\gamma\Delta\theta = 1.70 \times 75 \times 10^{-5} \times 9 = 0.0115 m³, about 11.5 liters of air space.

27.

A wire 1.5 m long at 20 °C gets 1.9 cm longer when warmed to 420 °C.

  • a.Find its average coefficient of linear expansion over this range.
  • b.The wire is stretched just taut (zero tension) at 420 °C. Find the stress in it if it is cooled to 20 °C without being allowed to contract (Y = 2 × 10¹¹ Pa).
Answer
  • a.α=ΔllΔθ=0.0191.5×400=3.17×10−5 K−1 \alpha = \frac{\Delta l}{l\Delta\theta} = \frac{0.019}{1.5 \times 400} = \textbf{3.17} \times \mathbf{10^{-5}} \textbf{ K}^{\mathbf{-1}}
  • b.stress=YαΔθ=2×1011×3.17×10−5×400=2.5×109 N/m2 \text{stress} = Y\alpha\Delta\theta = 2 \times 10^{11} \times 3.17 \times 10^{-5} \times 400 = \textbf{2.5} \times \mathbf{10^{9}} \textbf{ N/m}^{\mathbf{2}}

(That is more than most steels can bear: a real wire would stretch permanently or snap.)

28.

A steel tape measure is accurate at 20 °C. It is used at 10 °C to measure a distance of exactly 1 km. What will the tape read? (α for steel = 12 × 10⁻⁶ K⁻¹)

Answer

At 10 °C the tape is colder and shorter, so each of its “meters” is less than a real meter, and more of them fit into the kilometer: it reads more.
Length of one tape “meter” at 10 °C: 1×(1−12×10−6×10)=0.999 88 1 \times (1 - 12 \times 10^{-6} \times 10) = 0.999\,88 m.
Reading: 10000.999 88=1000.12 \dfrac{1000}{0.999\,88} = 1000.12 m = 1.000 12 km, 12 cm too much.