Skip to content

← Grade 11 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

13 questions

Unit 18 · Dispersion

Answer these questions

9.
  • a.What is the cause of dispersion?
  • b.Why is there no dispersion of monochromatic light?
  • c.Explain why a mirror cannot give rise to chromatic aberration.
Answer
  • a.The refractive index of a medium depends on the wavelength of light: it is larger for shorter wavelengths (violet) than for longer ones (red). So at a slanting surface each color is refracted through a different angle, and white light, a mixture of colors, is split.
  • b.Monochromatic light has one wavelength, so the medium has a single refractive index for it and all of it is bent through the same angle. There are no different colors to separate.
  • c.A mirror forms images by reflection, and the law of reflection, angle of reflection = angle of incidence, is the same for every wavelength. No color is turned more than another, so a mirror focuses all colors at one point: it has no chromatic aberration. (This is why the largest telescopes use mirrors.)
10.
  • a.Does the refractive index depend on the wavelength of light?
  • b.What do you understand by angular dispersion and dispersive power?
  • c.The dispersive power of the material of a lens is 0.026, and it produces a chromatic aberration of 0.351 cm. Calculate the focal length for the mean color.
Answer
  • a.Yes. It decreases as the wavelength increases, roughly as Cauchy’s relation μ=A+B/λ2+C/λ4 \mu = A + B/\lambda^2 + C/\lambda^4 says, so it is larger for violet than for red.
  • b.Angular dispersion is the angle between the violet and red rays leaving a prism, δv−δr=(μv−μr)A \delta_v - \delta_r = (\mu_v - \mu_r)A for a thin prism; it depends on the material and on the prism’s angle. Dispersive power is the ratio of the angular dispersion to the mean deviation, ω=μv−μrμ−1 \omega = \dfrac{\mu_v - \mu_r}{\mu - 1} ; it depends only on the material.
  • c.fr−fv=ωf f_r - f_v = \omega f , so f=fr−fvω=0.3510.026= f = \dfrac{f_r - f_v}{\omega} = \dfrac{0.351}{0.026} = 13.5 cm.
11.
  • a.When white light passes through a rectangular glass slab, no color is seen. Why?
  • b.Which light, blue or red, is deviated more by a prism?
  • c.For red light the focal length of a convex lens is 26 cm; for violet light it is 25 cm. Calculate the dispersive power of the lens, and the chromatic aberration it produces.
Answer
  • a.The colors are separated at the first face, but the second face is parallel to it, and refraction there turns each color back to the direction it came in. They all come out parallel to the incident beam and to one another, shifted sideways only a little (a fraction of a millimeter in an ordinary slab). Over the width of a beam these slightly shifted colors overlap and mix back to white, and only the extreme edges of the beam are faintly tinted.
  • b.Blue. Its wavelength is shorter, so glass has a larger refractive index for it, and the deviation (μ−1)A (\mu - 1)A is larger.
  • c.f=26+252=25.5 f = \dfrac{26 + 25}{2} = 25.5 cm; chromatic aberration fr−fv= f_r - f_v = 1 cm; ω=125.5= \omega = \dfrac{1}{25.5} = 0.039.
12.
  • a.How is dispersive power related to the refractive index of a material?
  • b.Why does red light appear at the top of the spectrum and violet at the bottom when white light is dispersed by a prism?
  • c.The dispersive powers of crown and flint glass are 0.015 and 0.03. Calculate the focal lengths of the lenses that form an achromatic doublet of focal length 100 cm when placed in contact.
Answer
  • a.ω=μv−μrμ−1 \omega = \dfrac{\mu_v - \mu_r}{\mu - 1} , where μv \mu_v , μr \mu_r and μ are the refractive indices for violet, red and the mean color.
  • b.A prism deviates light towards its base. With the prism’s apex upwards, as usually drawn, the base is at the bottom; violet, with the largest refractive index, is deviated most, so it goes lowest, and red, deviated least, stays highest (Figure 18.2).
  • c.f2f1=−0.030.015=−2 \dfrac{f_2}{f_1} = -\dfrac{0.03}{0.015} = -2 , and 1100=1f1−12f1=12f1 \dfrac{1}{100} = \dfrac{1}{f_1} - \dfrac{1}{2f_1} = \dfrac{1}{2f_1} , so f1= f_1 = 50 cm (crown, convex) and f2= f_2 = −100 cm (flint, concave).
13.
  • a.What do you mean by chromatic aberration?
  • b.Explain the meaning of achromatism in a lens.
  • c.Find the angle of a prism of dispersive power 0.03 and refractive index 1.53 that forms an achromatic combination with another prism of angle 5°, dispersive power 0.045 and refractive index 1.66.
Answer
  • a.The failure of a lens to bring all colors to a focus at one point on its axis: violet is focused nearer the lens than red, and the image has colored edges. It is measured by fr−fv=ωf f_r - f_v = \omega f .
  • b.Achromatism is freedom from chromatic aberration: a combination of lenses (usually a convex crown lens and a concave flint lens, with ω/f+ω′/f′=0 \omega/f + \omega'/f' = 0 ) that brings red and violet to the same focus.
  • c.ω(μ−1)A=ω′(μ′−1)A′ \omega(\mu - 1)A = \omega'(\mu' - 1)A' : A=0.045×0.66×5°0.03×0.53= A = \dfrac{0.045 \times 0.66 \times 5°}{0.03 \times 0.53} = 9.34°.
14.
  • a.Explain how two prisms can produce dispersion without deviation, and deviation without dispersion.
  • b.On what factors do angular dispersion and dispersive power depend?
  • c.When white light is dispersed by a prism, red appears at the top of the spectrum and violet at the bottom. Why?
  • d.The dispersive power of crown glass is 0.013 and that of flint glass 0.026. Calculate the focal lengths of the lenses that form an achromatic doublet of focal length 100 cm when placed in contact.
Answer
  • a.Place two thin prisms of different glasses (angles A and A′) with their apexes in opposite directions. Deviation without dispersion: choose the angles so that their dispersions are equal and opposite, (μv−μr)A=(μv′−μr′)A′ (\mu_v - \mu_r)A = (\mu'_v - \mu'_r)A' ; the colors recombine, while the deviations, which differ because the glasses differ, leave a net deviation. Dispersion without deviation: choose the angles so that the deviations of the mean color cancel, (μ−1)A=(μ′−1)A′ (\mu - 1)A = (\mu' - 1)A' ; the mean color goes straight through, while the dispersions, which differ, leave a spectrum (a direct-vision prism).
  • b.Angular dispersion depends on the material and on the angle of the prism; dispersive power depends only on the material (and, for both, on which colors are compared).
  • c.As in 12b: violet has the largest refractive index and is deviated most, towards the base, which is at the bottom when the apex points up; red is deviated least.
  • d.f2f1=−0.0260.013=−2 \dfrac{f_2}{f_1} = -\dfrac{0.026}{0.013} = -2 , and 1100=12f1 \dfrac{1}{100} = \dfrac{1}{2f_1} , so f1= f_1 = 50 cm (crown) and f2= f_2 = −100 cm (flint). (These are the same as in 12c: only the ratio of the dispersive powers matters, and it is 2 in both.)
15.
  • a.How would you combine two lenses of different materials so that there is no chromatic aberration?
  • b.An achromatic converging lens of focal length 30 cm is to be made by combining a crown glass lens and a flint glass lens. What must the focal lengths of the two lenses be, if the dispersive power of crown glass is 0.018 and that of flint glass 0.027?
Answer
  • a.Put a convex lens of the glass with the smaller dispersive power (crown) in contact with a concave lens of the glass with the larger dispersive power (flint), with focal lengths chosen so that ωf+ω′f′=0 \dfrac{\omega}{f} + \dfrac{\omega'}{f'} = 0 . The convex lens must be the stronger, so the pair still converges.
  • b.As in the worked example of 18.8: f1=−23f2 f_1 = -\dfrac{2}{3}f_2 and 130=−12f2 \dfrac{1}{30} = -\dfrac{1}{2f_2} , so the flint lens has f2= f_2 = −15 cm and the crown lens f1= f_1 = +10 cm.

Numerical problems

16.

A concave lens made of crown glass has radii of curvature 25 cm and 30 cm. Compute its longitudinal chromatic aberration, given μv \mu_v = 1.523 and μr \mu_r = 1.5204.

Answer

For a concave lens, in the real-is-positive convention, 1f=−(μ−1)(1R1+1R2) \dfrac{1}{f} = -(\mu - 1)\left(\dfrac{1}{R_1} + \dfrac{1}{R_2}\right) with R₁ = 25 cm and R₂ = 30 cm: 125+130=0.07333 \dfrac{1}{25} + \dfrac{1}{30} = 0.07333 cm⁻¹.
Violet: 1fv=−0.523×0.07333=−0.03835 \dfrac{1}{f_v} = -0.523 \times 0.07333 = -0.03835 , so fv=−26.07 f_v = -26.07 cm.
Red: 1fr=−0.5204×0.07333=−0.03816 \dfrac{1}{f_r} = -0.5204 \times 0.07333 = -0.03816 , so fr=−26.20 f_r = -26.20 cm.
Chromatic aberration fr−fv=−26.20−(−26.07)=−0.13 f_r - f_v = -26.20 - (-26.07) = -0.13 cm: its size is 0.13 cm, and, as for any concave lens, the violet focus is nearer the lens.

17.

An achromatic combination of a convex lens of crown glass and a concave lens of flint glass has a power of +5 D. The dispersive power of crown glass is 0.015 and that of flint glass 0.030. Calculate the focal lengths of the two lenses.

Answer

F=1P=15 F = \dfrac{1}{P} = \dfrac{1}{5} m = 20 cm.
f2f1=−0.0300.015=−2 \dfrac{f_2}{f_1} = -\dfrac{0.030}{0.015} = -2 , so f2=−2f1 f_2 = -2f_1 , and 120=1f1−12f1=12f1 \dfrac{1}{20} = \dfrac{1}{f_1} - \dfrac{1}{2f_1} = \dfrac{1}{2f_1} .
So f1= f_1 = +10 cm (crown, convex) and f2= f_2 = −20 cm (flint, concave).
(Crown glass’s dispersive power is about 0.015, half flint’s. If a book prints a much larger value for crown, such as 0.115, the numbers can’t work: a convex lens of the more dispersive glass can’t make a converging achromat with a concave lens of the less dispersive one.)

18.

The dispersive power of crown glass is 0.015 and that of flint glass 0.030. Calculate the focal lengths of the crown and flint lenses that form an achromatic doublet of focal length 80 cm when placed in contact.

Answer

f2=−2f1 f_2 = -2f_1 (as in 17), and 180=12f1 \dfrac{1}{80} = \dfrac{1}{2f_1} , so f1= f_1 = 40 cm (crown, convex) and f2= f_2 = −80 cm (flint, concave).

19.

An achromatic combination of focal length 50 cm consists of a convex lens of crown glass and a concave lens of flint glass. Find the focal length of each lens from these data: crown glass μv \mu_v = 1.523, μr \mu_r = 1.517; flint glass μv \mu_v = 1.664, μr \mu_r = 1.650.

Answer

Take each mean index as the average of violet and red: crown μ=1.520 \mu = 1.520 , flint μ′=1.657 \mu' = 1.657 .
ω1=1.523−1.5171.520−1=0.0060.520=0.01154 \omega_1 = \dfrac{1.523 - 1.517}{1.520 - 1} = \dfrac{0.006}{0.520} = 0.01154 , ω2=1.664−1.6501.657−1=0.0140.657=0.02131 \omega_2 = \dfrac{1.664 - 1.650}{1.657 - 1} = \dfrac{0.014}{0.657} = 0.02131 .
ω1f1+ω2f2=0 \dfrac{\omega_1}{f_1} + \dfrac{\omega_2}{f_2} = 0 and 1f1+1f2=150 \dfrac{1}{f_1} + \dfrac{1}{f_2} = \dfrac{1}{50} . From the first, 1f2=−ω1ω2⋅1f1=−0.5415f1 \dfrac{1}{f_2} = -\dfrac{\omega_1}{\omega_2}\cdot\dfrac{1}{f_1} = -\dfrac{0.5415}{f_1} , so 1−0.5415f1=150 \dfrac{1 - 0.5415}{f_1} = \dfrac{1}{50} .
f1=50×0.4585= f_1 = 50 \times 0.4585 = 22.9 cm (crown), and f2=−f10.5415= f_2 = -\dfrac{f_1}{0.5415} = −42.3 cm (flint). (Rounding ω to three figures first, 0.0115 and 0.0213, gives about 23.0 cm and −42.6 cm.)

20.

Calculate the angular dispersion between violet and red produced by a small-angled prism of angle A = 5°, with μv \mu_v = 1.66 and μr \mu_r = 1.54.

Answer

θ=(μv−μr)A=(1.66−1.54)×5°=0.12×5°= \theta = (\mu_v - \mu_r)A = (1.66 - 1.54) \times 5° = 0.12 \times 5° = 0.6°.

21.

The refractive indices of crown glass for violet and red light are 1.523 and 1.513, and those of flint glass 1.773 and 1.743. Calculate their dispersive powers.

Answer

Mean indices: crown 1.523+1.5132=1.518 \dfrac{1.523 + 1.513}{2} = 1.518 , flint 1.773+1.7432=1.758 \dfrac{1.773 + 1.743}{2} = 1.758 .
Crown: ω=1.523−1.5131.518−1=0.0100.518= \omega = \dfrac{1.523 - 1.513}{1.518 - 1} = \dfrac{0.010}{0.518} = 0.0193.
Flint: ω′=1.773−1.7431.758−1=0.0300.758= \omega' = \dfrac{1.773 - 1.743}{1.758 - 1} = \dfrac{0.030}{0.758} = 0.0396.