Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
9 questions
Unit 21 · Photons
Printable PDFs
- The unit as a book (A5) 23 pages Answers as an A4 booklet, 6 sheets
- Study notes 3 pages
- Worksheet 5 pages Answer key
- Harder practice questions 2 pages Answer key
Answer these questions
- a.Define threshold frequency, stopping potential and work function in photoelectric emission.
- b.Show that the existence of a threshold frequency is evidence in favor of the quantum theory.
Answer
a. Threshold frequency : the least frequency of light that can eject electrons from a given metal; below it none are ejected, however intense the light.
Stopping potential : the least reverse p.d. between emitter and collector that stops even the fastest photoelectrons, so that the photocurrent becomes zero; .
Work function : the least energy needed to free an electron from the surface of a given metal; .
b. On the wave theory, light’s energy is spread evenly over the wave front and grows with the intensity. Any frequency, made bright enough or shone long enough, should then give an electron the energy to escape: there should be no threshold frequency.
On the quantum theory, light is absorbed as photons, each of energy , and one photon gives all its energy to one electron. The electron escapes only if , that is . Below , every photon has too little energy, and more photons only mean more electrons each getting too little. So there must be a threshold frequency, fixed by the metal’s work function. Experiments find exactly such a threshold, so they support the quantum theory, and the wave theory can’t explain them.
When electromagnetic radiation falls on the surface of a metal, electrons leave the surface. But when the radiation’s frequency is below a certain value, no electrons are emitted.
- a.Explain why no electrons are emitted if the frequency is below a certain value.
- b.State two other observations of the photoelectric effect which suggest that electromagnetic radiation has particle properties.
- c.The work function of the metal is 3.8 eV.
- i.Calculate the least frequency of electromagnetic radiation that causes photoelectric emission.
- ii.An electron at the surface of the metal is emitted with a kinetic energy of J. Calculate the energy of the photon that freed it, in eV.
- d.Mention two uses of the photoelectric effect in everyday life.
Answer
- a.Radiation is absorbed as photons, each of energy , and one photon gives all its energy to one electron. An electron needs at least the work function to escape. Below the frequency , each photon has less energy than , so no electron can escape, however many photons arrive.
- b.Any two of: emission starts at once, even in very dim light (a wave would need time to pour in enough energy); the maximum kinetic energy of the electrons depends on the frequency and not on the intensity; the maximum kinetic energy rises in a straight line with frequency, as .
- c.(i) 9.2 × 10¹⁴ Hz (ultraviolet).
- ii.An electron at the surface loses nothing on the way out, so photon energy = work function + kinetic energy:
d. Any two of: photocells in automatic doors and burglar alarms; the photocell that read the sound track of old film projectors; photomultiplier tubes that count single photons in scientific instruments and medical scanners; night-vision devices. (Solar cells, light meters, the switches that turn street lights on at dusk and phone camera sensors use the inner photoelectric effect, in which the electrons are freed inside a semiconductor; they are usually accepted as uses too.)
- a.Describe Millikan’s experiment to find the value of Planck’s constant.
- b.The work function of potassium is J. Light of wavelength 5000 Å falls on it. Find (i) the stopping potential, (ii) the kinetic energy of the most energetic electrons, and (iii) their speed.
Answer
a. Millikan put three cylinders of alkali metal (sodium, potassium, lithium) on a wheel inside an evacuated chamber, with a knife worked from outside to shave a clean, untarnished surface on each. Monochromatic light from a mercury lamp, one spectral line at a time, fell through a window onto a clean surface; the photoelectrons crossed to a gauze collector. With a potentiometer he made the collector more and more negative compared with the metal, until a sensitive electrometer showed no current: that p.d. is the stopping potential , and .
He repeated this for several frequencies and plotted against . Einstein’s equation, , gives : a straight line, as he found. Its slope is , so ; he got J s. The line cuts the frequency axis at , giving the work function .
b. Photon energy:
- ii.Maximum kinetic energy: 1.72 × 10⁻²⁰ J.
- i.Stopping potential: 0.1075 V, about 0.11 V.
- iii.Speed: 1.94 × 10⁵ m/s.
- a.What is the photoelectric effect? Obtain Einstein’s photoelectric equation, and state and explain the laws of photoelectric emission from it.
- b.A sheet of silver is lit by monochromatic ultraviolet radiation of wavelength 1810 Å. The threshold wavelength of silver is 2640 Å. What is the maximum kinetic energy of the emitted electrons?
Answer
a. The photoelectric effect is the ejection of electrons from a metal surface when light (or other electromagnetic radiation) of high enough frequency falls on it.
Einstein’s equation. Light of frequency consists of photons of energy . A photon gives all its energy to one electron. Part of it, at least the work function , frees the electron from the metal; an electron at the surface keeps the rest as kinetic energy. So
The laws from it. (i) Since the kinetic energy can’t be negative, emission needs , : a threshold frequency, whatever the intensity. (ii) : the maximum kinetic energy rises in a straight line with frequency and doesn’t involve the intensity at all. (iii) A more intense light of the same frequency has more photons each second; each frees at most one electron, so the number of electrons, and the current, are proportional to the intensity. (iv) A photon’s energy is handed over in one go, so emission starts the moment the light arrives.
b.
In electronvolts: 2.16 eV (2.155 eV unrounded).
- a.Explain Einstein’s theory of photoelectricity, and use it to arrive at Einstein’s photoelectric equation.
- b.Photosynthesis starts in certain plants when they are put in sunlight, but not if they get only infrared light. Explain.
Answer
- a.As in question 14(a): light is a stream of photons of energy ; one photon gives all its energy to one electron; at least the work function is needed to free it, and the rest is its kinetic energy, so , with .
- b.Photosynthesis begins when a photon absorbed by a chlorophyll molecule lifts one of its electrons to a higher energy, enough to start the chain of chemical reactions. That needs a photon of at least a certain energy, which red and blue light have (about 1.8 eV and 2.8 eV). An infrared photon has much less energy, too little to excite the electron. As in the photoelectric effect, the energy of one photon is what counts: piling on more infrared photons, however intense the light, cannot add their energies on one electron, so photosynthesis doesn’t start.
A parallel beam of monochromatic light of wavelength 660 nm has an intensity of 0.25 mW/m². It falls normally on a surface that absorbs it totally. For a cross-sectional area of 1.2 cm² of the beam, find (a) the number of photons passing through it each second, (b) the momentum of one photon, and (c) the force exerted on the surface by the light. ( J s, m/s.)
Answer
a. Power through the area: W.
Energy of one photon: J.
Photons each second: 1.0 × 10¹¹.
- b. 1.0 × 10⁻²⁷ N s.
- c.Each photon absorbed gives the surface its momentum; force = momentum delivered each second:
(The same as .) A tiny force; spread over the area, a pressure of only about Pa. Yet sunlight’s much larger pressure, over a huge thin sheet, can push a spacecraft: Japan’s IKAROS sailed by sunlight in 2010.
Electrons are emitted from a metal surface when it is lit by suitable electromagnetic radiation.
- a.Name the effect.
- b.The graph above shows how the maximum kinetic energy of the emitted electrons varies with the frequency . Use it to find (i) the threshold frequency of the radiation, and (ii) a value for the Planck constant.
- c.On the graph, draw a line to show how varies with for a second metal with a lower work function.
- d.The kinetic energy of the electrons is described as the maximum. Suggest why the emitted electrons have a range of kinetic energies for any one frequency.
Hint
Draw the best straight line through the points. : what are its slope and its crossing with the frequency axis?
Answer
- a.The photoelectric effect.
- b.Draw the best straight line through the five points (Figure 21.13).
- i.It meets the frequency axis () at about Hz: the threshold frequency 6.8 × 10¹⁴ Hz.
- ii.Its slope is . From two points on the line far apart, say (10, 2.1) and (18, 7.4):
(Any value from about to J s, carefully read, is fine.)
- c.A lower work function means a lower threshold frequency, but the same slope : a line parallel to the first, to its left, meeting the frequency axis at a lower frequency (dashed in Figure 21.13).
- d.Only electrons right at the surface leave with all of . Electrons freed deeper in the metal use some of their energy in collisions on the way to the surface, and electrons that start below the metal’s top energy level need more than to escape, so they come out with less kinetic energy, anywhere from zero up to the maximum.
A stationary, isolated nucleus emits a γ-ray photon of energy 0.51 MeV.
- a.State what is meant by a photon.
- b.For the γ-ray photon, calculate (i) its wavelength, and (ii) its momentum.
- c.For this nucleus, find the change in mass Δm during the decay that gives rise to the energy of the γ-ray photon.
Answer
- a.A photon is a quantum (packet) of electromagnetic radiation, of energy , with no charge and no rest mass, traveling at the speed of light.
- b. J.
- i. 2.4 × 10⁻¹² m.
- ii. 2.7 × 10⁻²² N s.
- c.The photon’s energy comes from a loss of mass, :
the mass of an electron, as it happens. (The nucleus also recoils, with momentum equal and opposite to the photon’s, but its recoil energy is tiny.)
- a.Explain what is meant by the photoelectric effect.
- b.One wavelength of the radiation from a mercury vapor lamp is 436 nm. Calculate the photon energy for this wavelength.
- c.Light from the lamp falls, separately, on surfaces of cesium and tungsten. Their work functions are given in the table. Calculate the threshold wavelength for photoelectric emission from (i) cesium and (ii) tungsten.
| Metal | Work function (eV) |
|---|---|
| Cesium | 1.4 |
| Tungsten | 4.5 |
d. Use your answers to (c) to say, with reasons, whether light of wavelength 436 nm from the lamp will cause photoelectric emission from each metal.
Answer
- a.The emission of electrons from a metal surface when electromagnetic radiation of high enough frequency falls on it, each photon giving its energy to one electron.
- b. 4.6 × 10⁻¹⁹ J (2.85 eV).
- c..
- i.Cesium: m 890 nm.
- ii.Tungsten: m 280 nm.
- d.Cesium: yes. 436 nm is shorter than its threshold, 890 nm, so each photon (2.85 eV) has more than the 1.4 eV needed.
Tungsten: no. 436 nm is longer than its threshold, 280 nm, so each photon has less than the 4.5 eV needed, and no emission happens however bright the lamp.
(The table in Section 21.4 gives 1.9 eV for cesium; measured work functions depend on how the surface is prepared. With 1.9 eV the threshold is 650 nm, and 436 nm light still frees electrons from cesium.)
