Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
8 questions
Unit 4 · First Law of Thermodynamics
Printable PDFs
- The unit as a book (A5) 27 pages Answers as an A4 booklet, 7 sheets
- Study notes 3 pages
- Worksheet 4 pages Answer key
- Harder practice questions 2 pages Answer key
Answer these questions
- a.Define a thermodynamic system. Give one example of each type, and differentiate between open, closed and isolated systems with examples.
- b.How does work done on the system differ from work done by the system?
- c.A gas at a pressure of Pa and a volume of 0.01 m³ expands isobarically to 0.03 m³. Find the work done.
- d.Define an indicator diagram and explain how the work done by an expanding gas can be found from it.
Hint
c. At constant pressure, .
Answer
a. A thermodynamic system is a chosen part of matter or region of space, separated from its surroundings by a real or imagined boundary, whose energy changes we study.
| Open system | Closed system | Isolated system | |
|---|---|---|---|
| Matter crosses the boundary | yes | no | no |
| Energy (heat, work) crosses | yes | yes | no |
| Example | water boiling in an open pot | gas in a conducting cylinder with a piston | hot tea in a stoppered vacuum flask |
- b.Work done by the system is done when it pushes its surroundings back (a gas expanding, ): the system gives energy to the surroundings, and the work is taken as positive. Work done on the system is done when the surroundings push it in (a gas compressed, ): the surroundings give it energy, and the work done by the system is negative. In both, .
- c. 4000 J.
- d.An indicator diagram is a graph of the pressure of a working gas against its volume during a process. The work done is the area under the curve: in a small step the volume grows by at pressure , doing work , the area of a thin strip under the curve (Figure 4.4); adding all the strips, the area between the curve, the volume axis and the lines and . For a cycle, the net work is the area of the loop.
- a.Explain the concept of internal energy and its relation with heat and work. What does the equation signify? How does the internal energy of a real gas differ from that of an ideal gas?
- b.Calculate the change in internal energy of 2 moles of a monatomic ideal gas whose temperature changes from 300 K to 500 K. ()
Answer
a. The internal energy of a system is the total kinetic and potential energy of its molecules. It is a state function, and it changes in two ways: heat flowing in raises it, and work done by the system lowers it: .
is this for a process with no heat exchanged (adiabatic, ): any work the system does comes out of its internal energy, so an expanding gas cools, and work done on it raises its internal energy, so a compressed gas heats up.
In an ideal gas the molecules don’t attract, so there is no potential energy and depends on the temperature only. In a real gas there is also potential energy from the attraction between molecules, which depends on their spacing, so depends on both temperature and volume.
b. 4988.4 J (about 4.99 kJ).
- a.State and explain the first law of thermodynamics. Discuss its significance.
- b.Does it follow the law of conservation of energy?
- c.A gas absorbs 600 J of heat and does 150 J of work. Find the change in its internal energy.
- d.List the limitations of the first law of thermodynamics.
Answer
- a.First law: when heat is given to a system, it is used to raise the system’s internal energy () and to do external work (): , or for a gas, . Heat in, work out and stored energy always balance. Significance: it shows heat is a form of energy; it lets us find any one of heat, work and change of internal energy from the other two; it makes internal energy a state function; it rules out a machine that gives work without taking in energy; it is the basis of the study of engines, refrigerators, chemical reactions and living things.
- b.Yes. It is the law of conservation of energy applied to processes involving heat: no energy is created or lost, only shared between internal energy and work.
- c. 450 J (an increase).
- d.i. It doesn’t tell the direction in which heat flows, or why it never flows by itself from cold to hot. ii. It doesn’t give the conditions under which heat can be turned into work. iii. It doesn’t say that, although work can be turned completely into heat, heat can’t be turned completely into work in a cycle. iv. It doesn’t say how much of the heat taken in can become work (the limit to an engine’s efficiency).
- a.Why does a gas have two specific heat capacities?
- b.Derive Mayer’s relation, .
- c.Why is always greater than ?
- d.If J/(mol K) and J/(mol K), find the gas constant and γ.
Answer
- a.The heat needed to warm a gas depends on whether it is allowed to expand. If it expands, it does work, which needs extra heat; if not, it doesn’t. Since a gas can be heated in many ways, it has many heat capacities; the two standard ones are at constant volume () and at constant pressure (). A solid or liquid expands so little that the difference hardly matters.
- b.For one mole of ideal gas:
- At constant volume, no work is done, so , and . Since depends only on , this is the same for any process with the same .
- At constant pressure: , so .
- From at constant : .
- So , and dividing by : .
- c.At constant pressure the gas expands as it warms and does work against its surroundings, so it needs the heat for the rise in internal energy plus the heat for this work ( per mole per kelvin). At constant volume no work is done. So .
- d. 8.3 J/(mol K); 1.40 (a diatomic gas).
- a.Explain the isothermal, adiabatic, isobaric and isochoric processes with the help of P–V diagrams.
- b.Differentiate between the types of thermodynamic process, and compare their P–V diagrams.
Answer
a. Isothermal: the temperature stays constant (slow change, conducting walls, in contact with a reservoir); constant, a hyperbola on the P–V diagram (Figure 4.9); , so the heat taken in equals the work done. Adiabatic: no heat is exchanged (insulated, or fast); constant, a curve steeper than the isotherm (Figure 4.11); the work comes from the internal energy, so expansion cools the gas and compression heats it. Isobaric: the pressure stays constant (a free piston); a horizontal line (Figure 4.12); , and the heat raises the internal energy and does work. Isochoric: the volume stays constant (a rigid container); a vertical line (Figure 4.13); no work, so all the heat raises the internal energy.
b.
| Isothermal | Adiabatic | Isobaric | Isochoric | |
|---|---|---|---|---|
| Constant | temperature | no heat flow () | pressure | volume |
| Equation | const | const | const | const |
| P–V diagram | hyperbola | steeper curve | horizontal line | vertical line |
| Work | 0 | |||
| Heat | 0 | |||
| 0 | ||||
| Speed, walls | slow, conducting | fast, or insulated | free piston | rigid container |
- a.Define an adiabatic process. Derive the equation constant.
- b.In an adiabatic expansion, a gas does 1200 J of work. Find the change in its internal energy.
- c.Find the final temperature and the work done when 1 mole of ideal gas expands adiabatically from 1 L to 5 L. Take γ = 1.4, K, J/(mol K).
Hint
c. Use constant, then .
Answer
a. An adiabatic process is one in which no heat is exchanged between the system and its surroundings (), because the system is insulated or the change is too fast for heat to flow.
Derivation, for moles of ideal gas:
- First law with : .
- From : , so .
- Substituting: , so .
- With : . Dividing by : .
- Integrating: constant, so constant, and constant.
- b., so −1200 J: the internal energy falls by 1200 J.
- c. 157.6 K.
2.96 × 10³ J.
The textbook gives 118.8 K and 3768.3 J, but is 157.6 K, so those numbers don’t work; the answers above follow from the question’s data.
- a.Derive expressions for the work done in isothermal and adiabatic processes.
- b.A gas expands isothermally from 2 L to 8 L at a temperature of 300 K. Calculate the work done. ( J/(mol K), mol)
Answer
a. Isothermal, moles at temperature , from to : , with and constant:
Adiabatic, from to : , so :
using , and .
b. 3457.6 J.
- a.Define the heat capacity ratio (γ).
- b.How does γ vary with the atomicity of a gas? Explain using degrees of freedom.
- c.Differentiate between reversible and irreversible processes.
Answer
- a.The heat capacity ratio γ (the adiabatic index) is the ratio of a gas’s molar heat capacity at constant pressure to that at constant volume: (equally ). It is always greater than 1.
- b.By equipartition each degree of freedom holds per mole, so with degrees of freedom , , and . Monatomic: 3 translational, , γ = 5/3 = 1.67. Diatomic: 3 translational + 2 rotational, , γ = 7/5 = 1.40. Non-linear polyatomic: 3 + 3, , γ = 4/3 = 1.33. The more atoms, the more degrees of freedom, and the smaller γ (and smaller still when vibrations join in at high temperatures).
c.
| Reversible process | Irreversible process |
|---|---|
| Can be retraced so that the system and surroundings both return to their first states | Can’t be retraced without leaving a change somewhere |
| Infinitely slow (quasi-static), in equilibrium at every step | Usually fast, through states not in equilibrium |
| No friction, viscosity or resistance; no energy dissipated | Energy is dissipated as waste heat |
| Total entropy stays constant | Total entropy increases |
| Can be drawn as a curve on a P–V diagram | Only its end states can be marked |
| An idealization (slow frictionless compression) | Every real process (rusting, friction, heat flowing from hot to cold) |
