Skip to content

← Grade 12 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

8 questions

Unit 9 · Acoustic Phenomena

Answer these questions

13.
  • a.Define pressure amplitude. How does it relate to sound wave propagation?
  • b.A sound wave has a pressure amplitude of 0.5 Pa and travels through air of density 1.2 kg/m³ at 340 m/s. Find the intensity of the wave.
Answer
  • a.The pressure amplitude is the greatest increase or decrease of the pressure of the medium, from its normal value, as a sound wave travels through it, (ΔP)max⁡ (\Delta P)_{\max} . As sound propagates, the layers of the medium are displaced, crowding into compressions (pressure above normal) and spreading into rarefactions (below normal); the pressure at each point varies sinusoidally at the sound’s frequency, ΔP=(ΔP)max⁡cos⁡(ωt−kx) \Delta P = (\Delta P)_{\max}\cos(\omega t - kx) , 90° out of phase with the displacement. It is proportional to the displacement amplitude, (ΔP)max⁡=Bak=ρvωa (\Delta P)_{\max} = Bak = \rho v\omega a , and it fixes the energy the wave carries: I=(ΔP)max⁡2/2ρv I = (\Delta P)_{\max}^2/2\rho v . Our ears and microphones respond to these pressure changes.
  • b.I=(ΔP)max⁡22ρv=0.522×1.2×340=0.25816=3.06×10−4 W/m2 \begin{aligned} I &= \frac{(\Delta P)_{\max}^2}{2\rho v} \\ &= \frac{0.5^2}{2 \times 1.2 \times 340} \\ &= \frac{0.25}{816} \\ &= \mathbf{3.06 \times 10^{-4}\ W/m^2} \end{aligned}

(An intensity level of 10log⁡10(3.06×108)=85 10\log_{10}(3.06 \times 10^8) = 85 dB.)

14.
  • a.Differentiate between intensity and loudness of sound. How are they measured?
  • b.A sound of intensity 1.0 × 10⁻⁸ W/m² is increased to 1.0 × 10⁻⁵ W/m². By how many decibels has the loudness increased?
Answer

a.

Intensity Loudness
the average sound energy per second through unit area normal to the wave the sensation of how strong a sound is
a physical, objective quantity subjective: depends on the listener and on the frequency
measured in W/m², with a sound meter (or from P/A P/A ) compared through the intensity level, β=10log⁡10(I/I0) \beta = 10\log_{10}(I/I_0) dB, read on a decibel meter; by Weber–Fechner, L∝log⁡I L \propto \log I
proportional to a2 a^2 grows only as the logarithm of the intensity

b. Δβ=10log⁡10(I2I1)=10log⁡10(1.0×10−51.0×10−8)=10log⁡10103=30 dB \begin{aligned} \Delta\beta &= 10\log_{10}\left(\frac{I_2}{I_1}\right) \\ &= 10\log_{10}\left(\frac{1.0 \times 10^{-5}}{1.0 \times 10^{-8}}\right) \\ &= 10\log_{10}10^3 \\ &= \mathbf{30\ dB} \end{aligned}

15.
  • a.Explain the concepts of pitch and quality of sound. Give examples of how different instruments produce sound with different quality.
  • b.A source of sound emits uniformly in all directions with a total power of 2 W. What is the intensity at a distance of 3 m?
Answer
  • a.Pitch is how high or low (shrill or grave) a sound seems; it depends mainly on the frequency: the higher the frequency, the higher the pitch (a whistle, a mosquito, a child’s voice are high; a bass drum, an elephant’s rumble, a man’s voice low). Quality (timbre) is what lets us tell apart two sounds of the same pitch and loudness from different sources. It depends on the overtones that sound with the fundamental and their strengths, which give the wave its shape. Examples: a bansuri’s note is nearly a pure tone with weak overtones, soft and smooth; a clarinet (like a pipe closed at one end) has mostly odd harmonics, a hollow sound; a violin or a sarangi, bowed, has strong harmonics of every order, bright and rich; a struck piano or madal has overtones that die away at different rates, so its sound changes as it fades.
  • b.I=P4πr2=24π×32=2113.1=0.0177 W/m2 \begin{aligned} I &= \frac{P}{4\pi r^2} \\ &= \frac{2}{4\pi \times 3^2} \\ &= \frac{2}{113.1} \\ &= \mathbf{0.0177\ W/m^2} \end{aligned}
16.
  • a.How does the intensity of sound vary with distance from the source?
  • b.The sound from a speaker has an intensity of 1.0 × 10⁻⁶ W/m² at a distance of 2 m. What is the intensity at 4 m from the source?
Answer
  • a.From a source sending sound equally in all directions, in the open, the power P P spreads over a sphere of area 4πd2 4\pi d^2 , so I=P/4πd2 I = P/4\pi d^2 : the intensity is inversely proportional to the square of the distance (the inverse square law). Twice as far, a quarter the intensity (6 dB less); ten times as far, a hundredth (20 dB less). Indoors, reflections make it fall more slowly, and absorption by the air, faster over long distances.
  • b.I2I1=d1 2d2 2⇒ I2=1.0×10−6×(24)2=1.0×10−64=2.5×10−7 W/m2 \begin{aligned} \frac{I_2}{I_1} &= \frac{d_1^{\,2}}{d_2^{\,2}} \\ \Rightarrow\ I_2 &= 1.0 \times 10^{-6} \times \left(\frac{2}{4}\right)^2 \\ &= \frac{1.0 \times 10^{-6}}{4} \\ &= \mathbf{2.5 \times 10^{-7}\ W/m^2} \end{aligned}
17.
  • a.Discuss how the human ear perceives loudness and its logarithmic relation with intensity.
  • b.State and explain the Doppler effect. What factors influence the observed frequency?
  • c.An observer moves towards a stationary source of frequency 600 Hz with a speed of 20 m/s. What is the frequency heard? (v=340 v = 340 m/s)
Answer
  • a.The ear senses the pressure changes of a sound, but the loudness we perceive doesn’t grow in proportion to the intensity: it responds to ratios. Ten times the intensity seems about one step louder, and another ten times, another step of the same size. This is the Weber–Fechner law: loudness L∝log⁡10I L \propto \log_{10} I . This is how the ear copes with a range of 1012 10^{12} between the faintest sound it hears (I0=10−12 I_0 = 10^{-12} W/m²) and the threshold of pain (1 W/m²). So sound is measured by the intensity level β=10log⁡10(I/I0) \beta = 10\log_{10}(I/I_0) dB, which runs from 0 to about 120 dB over that range: every +10 dB is 10 times the intensity. Loudness also depends on the frequency (the ear is most sensitive at about 2–5 kHz) and on the listener.
  • b.The Doppler effect is the apparent change in the frequency of a wave received by an observer because the source and the observer move relative to each other: higher when they approach, lower when they separate. A moving source crowds its waves together in front of it (shorter wavelength) and spreads them out behind; a moving observer meets the waves faster or slower. The frequency heard, f′=(v±vlv∓vs)f f' = \left(\dfrac{v \pm v_l}{v \mp v_s}\right)f , depends on the source’s frequency f f , the speed of the wave in the medium v v (and so on the temperature and any wind), the speed of the source vs v_s , the speed of the observer vl v_l , and the directions of their motions along the line joining them.
  • c.f′=(v+vlv)f=340+20340×600=360340×600=635.3 Hz \begin{aligned} f' &= \left(\frac{v + v_l}{v}\right)f \\ &= \frac{340 + 20}{340} \times 600 \\ &= \frac{360}{340} \times 600 \\ &= \mathbf{635.3\ Hz} \end{aligned}
18.
  • a.Derive the expression for the Doppler effect when: i. the source is moving and the observer at rest; ii. the observer is moving and the source at rest; iii. both are moving.
  • b.The source and the observer move towards each other. The source emits sound of frequency 440 Hz and moves at 30 m/s; the observer moves at 20 m/s. Find the apparent frequency. (v=340 v = 340 m/s)
Answer
  • a.Let the source send frequency f f and wavelength λ=v/f \lambda = v/f , sound traveling at v v in still air.
  • i.Source moving towards an observer at rest, speed vs v_s . In one second the source sends f f waves; the first travels v v , while the source moves vs v_s after it. So the f f waves lie in a distance v−vs v - v_s : λ′=v−vsf \lambda' = \dfrac{v - v_s}{f} . They reach the observer at speed v v , so

f′=vλ′=(vv−vs)f f' = \frac{v}{\lambda'} = \left(\frac{v}{v - v_s}\right)f
Moving away, the waves spread over v+vs v + v_s : λ′=v+vsf \lambda' = \dfrac{v + v_s}{f} and f′=(vv+vs)f f' = \left(\dfrac{v}{v + v_s}\right)f .
ii. Observer moving towards a source at rest, speed vl v_l . The wavelength is unchanged, λ \lambda , but the waves pass the observer at vR=v+vl v_R = v + v_l , so
f′=vRλ=v+vlv/f=(v+vlv)f f' = \frac{v_R}{\lambda} = \frac{v + v_l}{v/f} = \left(\frac{v + v_l}{v}\right)f
Moving away, vR=v−vl v_R = v - v_l and f′=(v−vlv)f f' = \left(\dfrac{v - v_l}{v}\right)f .
iii. Both moving towards each other. The source’s motion gives λ′=v−vsf \lambda' = \dfrac{v - v_s}{f} ; the observer’s gives vR=v+vl v_R = v + v_l . So
f′=vRλ′=(v+vlv−vs)f f' = \frac{v_R}{\lambda'} = \left(\frac{v + v_l}{v - v_s}\right)f
In general, f′=(v±vlv∓vs)f f' = \left(\dfrac{v \pm v_l}{v \mp v_s}\right)f , the upper signs for motion towards the other.
b. f′=(v+vlv−vs)f=340+20340−30×440=360310×440=511.0 Hz \begin{aligned} f' &= \left(\frac{v + v_l}{v - v_s}\right)f \\ &= \frac{340 + 20}{340 - 30} \times 440 \\ &= \frac{360}{310} \times 440 \\ &= \mathbf{511.0\ Hz} \end{aligned}

19.
  • a.What is the significance of the Doppler effect in real life? Mention at least three applications.
  • b.A source of sound approaches a stationary observer. What happens to the frequency heard? Explain why.
  • c.A source emitting sound of frequency 400 Hz is moving away from an observer at rest with a speed of 40 m/s. What frequency is heard? (v=340 v = 340 m/s)
Answer
  • a.The Doppler effect lets us measure the speed of something from a distance, from the frequency of the waves it sends or reflects, without touching it. Applications: radar speed guns and traffic monitoring (vehicles’ speeds); Doppler ultrasound and echocardiography (the speed and direction of blood flow); astronomy (the red and blue shifts of stars and galaxies, the expansion of the universe, planets round other stars); weather radar (the winds inside storms); sonar (the speeds of submarines and shoals of fish); satellite navigation.
  • b.The frequency heard is higher than the source’s. The source moves after the waves it has sent, so each wave is sent from a point closer to the observer than the one before: the waves in front of it are crowded together, λ′=(v−vs)/f \lambda' = (v - v_s)/f . They still travel at the speed of sound, so more of them reach the observer each second: f′=vf/(v−vs)>f f' = vf/(v - v_s) > f .
  • c.f′=(vv+vs)f=340340+40×400=340380×400=357.9 Hz \begin{aligned} f' &= \left(\frac{v}{v + v_s}\right)f \\ &= \frac{340}{340 + 40} \times 400 \\ &= \frac{340}{380} \times 400 \\ &= \mathbf{357.9\ Hz} \end{aligned}
20.
  • a.What is the condition under which no Doppler shift is observed even if there is relative motion?
  • b.A whistle of frequency 500 Hz moves towards a stationary observer with speed 30 m/s. The speed of sound is 340 m/s. What frequency does the observer hear?
Answer
  • a.There is no Doppler shift when the distance between the source and the observer isn’t changing, that is, when neither has any velocity along the line joining them. This happens when the motion is at right angles to that line: a source moving round in a circle with the observer at the center, or a car at the very instant it passes closest to you. (Also, trivially, when both move in the same direction at the same speed: then there is no relative motion.) Only the part of the relative velocity along the line of sight shifts the frequency.
  • b.f′=(vv−vs)f=340340−30×500=340310×500=548.4 Hz \begin{aligned} f' &= \left(\frac{v}{v - v_s}\right)f \\ &= \frac{340}{340 - 30} \times 500 \\ &= \frac{340}{310} \times 500 \\ &= \mathbf{548.4\ Hz} \end{aligned}