Skip to content

← Grade 11 Physics

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

10 questions

Unit 1 · Physical Quantities

Answer these questions

12.
  • a.Define the dimensional formula of a physical quantity.
  • b.Taking force, length and time as fundamental quantities, find the dimensional formula of energy.
  • c.The volume of liquid flowing per second through a horizontal pipe of length l l is given by kPaxηl \dfrac{kPa^x}{\eta l} , where k k is a dimensionless constant, P P is the pressure difference between the pipe’s ends, a a is the radius of the pipe, and η \eta is the coefficient of viscosity, [M L⁻¹ T⁻¹]. Find x x by the method of dimensions.
Hint

c. A volume per second is [L³ T⁻¹]. Match the powers of L.

Answer
  • a.The dimensional formula of a physical quantity is the expression that shows which fundamental quantities, raised to which powers, make it up: for a mechanical quantity, [MaLbTc] [M^aL^bT^c] . For example, force is [M L T⁻²].
  • b.Energy = force × displacement, so [E]=[F][L]= [E] = [F][L] = [F L T⁰].
  • c.[volume per second]=[L3T−1] [\text{volume per second}] = [L^3T^{-1}] .

[kPaxηl]=[ML−1T−2][Lx][ML−1T−1][L]=[M0 Lx−1 T−1] \left[\frac{kPa^x}{\eta l}\right] = \frac{[ML^{-1}T^{-2}][L^x]}{[ML^{-1}T^{-1}][L]} = [M^0\,L^{x-1}\,T^{-1}]
Matching the powers of L: x−1=3 x - 1 = 3 , so x=4 x = 4 . (The flow goes as the fourth power of the radius, Poiseuille’s law: half as wide a pipe carries a sixteenth as much.)

13.
  • a.The frequency f f of vibration of a string depends on its length l l , its tension T T , and its mass per unit length m m . Show by dimensions that f∝1lTm f \propto \dfrac{1}{l}\sqrt{\dfrac{T}{m}} ; experiment then gives f=12lTm f = \dfrac{1}{2l}\sqrt{\dfrac{T}{m}} .
  • b.A force of 5 N is expressed as 5 N=a+bt+ct2+dt3 5\ \text{N} = a + bt + ct^2 + dt^3 , where t t is time. Find the dimensional formulas of a a , b b , c c and d d .
  • c.Using the relation in a., find the dimensional formula of frequency.
Answer

a. Let f=k lx Ty mz f = k\,l^x\,T^y\,m^z , with k k a pure number.
[T−1]=[L]x[MLT−2]y[ML−1]z=[My+z Lx+y−z T−2y] [T^{-1}] = [L]^x[MLT^{-2}]^y[ML^{-1}]^z = [M^{y+z}\,L^{x+y-z}\,T^{-2y}]
T: −2y=−1⇒y=12 -2y = -1 \Rightarrow y = \tfrac{1}{2} . M: y+z=0⇒z=−12 y + z = 0 \Rightarrow z = -\tfrac{1}{2} . L: x+y−z=0⇒x=−1 x + y - z = 0 \Rightarrow x = -1 .
So f=klTm∝1lTm f = \dfrac{k}{l}\sqrt{\dfrac{T}{m}} \propto \dfrac{1}{l}\sqrt{\dfrac{T}{m}} . Dimensions can’t give the number k k ; experiment (and the theory of waves on a string) gives k=12 k = \tfrac{1}{2} .
b. Every term is a force, [M L T⁻²]:
[a]= [a] = [M L T⁻²]; [b]=[MLT−2]/[T]= [b] = [MLT^{-2}]/[T] = [M L T⁻³]; [c]=[MLT−2]/[T2]= [c] = [MLT^{-2}]/[T^2] = [M L T⁻⁴]; [d]=[MLT−2]/[T3]= [d] = [MLT^{-2}]/[T^3] = [M L T⁻⁵].
c. [f]=1[L][MLT−2][ML−1]=1[L][L2T−2]=[LT−1][L]=[M0L0T−1] [f] = \frac{1}{[L]}\sqrt{\frac{[MLT^{-2}]}{[ML^{-1}]}} = \frac{1}{[L]}\sqrt{[L^2T^{-2}]} = \frac{[LT^{-1}]}{[L]} = [M^0L^0T^{-1}]
as a frequency should be.

14.
  • a.How do you tell precision from accuracy? How is precision related to significant figures?
  • b.Which of these measurements is the most precise, and why? i. 2 cm, ii. 2.00 cm, iii. 2.000 cm, iv. 2.0000 cm
Answer

a. Accuracy is how close a measurement is to the true value. Precision is how close repeated measurements are to each other, and how finely a value is read. Readings can be precise but inaccurate (a faulty instrument that is wrong the same way every time) or accurate on average but imprecise (scattered round the true value).
The number of significant figures shows the precision: a measurement with more significant figures was read to a finer division, so it is more precise.
b. iv. 2.0000 cm: it has five significant figures, so it was read to 0.0001 cm, while 2 cm was read only to the nearest centimeter. (Whether it is also the most accurate depends on whether the instrument reads true; the digits alone can’t say.)

Numerical problems

15.

The velocity of a particle is v=a+bt+ct2 v = a + bt + ct^2 , where t t is time. Find the dimensions of a a , b b and c c , if v v is in m/s and t t in s.

Answer

Each term must be a velocity, [L T⁻¹]:
[a]= [a] = [L T⁻¹]; [b]=[LT−1]/[T]= [b] = [LT^{-1}]/[T] = [L T⁻²]; [c]=[LT−1]/[T2]= [c] = [LT^{-1}]/[T^2] = [L T⁻³].

16.

A body moving through air at a high speed v v feels a retarding force F=kAρvx F = kA\rho v^x , where A A is the body’s surface area, ρ \rho is the density of the air, and k k is a dimensionless constant. Find x x .

Answer

[MLT−2]=[L2][ML−3][LT−1]x=[M Lx−1 T−x] [MLT^{-2}] = [L^2][ML^{-3}][LT^{-1}]^x = [M\,L^{x-1}\,T^{-x}]
T: −x=−2 -x = -2 , so x=2 x = 2 (and L checks: x−1=1 x - 1 = 1 ). Air drag at high speed grows as the square of the speed: drive twice as fast and the drag is four times as large.

17.

The velocity of a particle is v=a+bt+cd+t v = a + bt + \dfrac{c}{d + t} , where t t is time. Find the dimensions of a a , b b , c c and d d .

Hint

Only quantities of the same dimensions can be added: what must d d be, to be added to t t ?

Answer

d d is added to t t , so [d]= [d] = [T]. Then every term of v v is [L T⁻¹]:
[a]= [a] = [L T⁻¹]; [b]= [b] = [L T⁻²]; [cd+t]=[LT−1]⇒[c]=[LT−1][T]= \left[\dfrac{c}{d + t}\right] = [LT^{-1}] \Rightarrow [c] = [LT^{-1}][T] = [L].

18.

Find the value of 10 joules in a system whose fundamental units are 10 cm, 100 g and 30 s.

Answer

Energy: [ML2T−2] [ML^2T^{-2}] , so a=1 a = 1 , b=2 b = 2 , c=−2 c = -2 . With n1=10 n_1 = 10 in the SI (kg, m, s):
n2=n1(M1M2)(L1L2)2(T1T2)−2=10×1 kg0.1 kg×(1 m0.1 m)2×(1 s30 s)−2 n_2 = n_1\left(\frac{M_1}{M_2}\right)\left(\frac{L_1}{L_2}\right)^2\left(\frac{T_1}{T_2}\right)^{-2} = 10 \times \frac{1\ \text{kg}}{0.1\ \text{kg}} \times \left(\frac{1\ \text{m}}{0.1\ \text{m}}\right)^2 \times \left(\frac{1\ \text{s}}{30\ \text{s}}\right)^{-2}
n2=10×10×100×900=9×106 n_2 = 10 \times 10 \times 100 \times 900 = 9 \times 10^6
10 J = 9 × 10⁶ new units. (The new unit of energy is tiny: 0.1 kg × (0.1 m)² ÷ (30 s)² ≈ 1.1 × 10⁻⁶ J.)

19.

The length and breadth of a field are l=(110±2) l = (110 \pm 2) m and b=(100±4) b = (100 \pm 4) m. Find the area of the field with its uncertainty.

Answer

A=lb=110×100=11 000 A = lb = 110 \times 100 = 11\,000 m².
For a product, the relative uncertainties add:
ΔAA=2110+4100=0.018+0.040=0.058 \frac{\Delta A}{A} = \frac{2}{110} + \frac{4}{100} = 0.018 + 0.040 = 0.058
ΔA=0.058×11 000≈640 \Delta A = 0.058 \times 11\,000 \approx 640 m², about 0.06 × 10⁴ m².
Area = (1.10 ± 0.06) × 10⁴ m².

20.

Convert i. 72 km/h into m/s, and ii. 20 g/cm³ into kg/m³.

Answer
  • i.72 kmh=72×1000 m3600 s= 72\ \dfrac{\text{km}}{\text{h}} = 72 \times \dfrac{1000\ \text{m}}{3600\ \text{s}} = 20 m/s. (To change km/h to m/s, divide by 3.6.)
  • ii.20 gcm3=20×10−3 kg10−6 m3=20×103= 20\ \dfrac{\text{g}}{\text{cm}^3} = 20 \times \dfrac{10^{-3}\ \text{kg}}{10^{-6}\ \text{m}^3} = 20 \times 10^3 = 2.0 × 10⁴ kg/m³.
21.

The frequency of vibration of a stretched string depends on its tension T T , its length L L , and its mass per unit length m m . Using dimensions, prove that f∝1LTm f \propto \dfrac{1}{L}\sqrt{\dfrac{T}{m}} .

Answer

Let f=k TxLymz f = k\,T^x L^y m^z . Put in the dimensions, [f]=[T−1] [f] = [T^{-1}] , tension [MLT−2] [MLT^{-2}] , [L] [L] , [m]=[ML−1] [m] = [ML^{-1}] :
[M0L0T−1]=[Mx+z Lx+y−z T−2x] [M^0L^0T^{-1}] = [M^{x+z}\,L^{x+y-z}\,T^{-2x}]
Time: −2x=−1⇒x=12 -2x = -1 \Rightarrow x = \tfrac{1}{2} . Mass: x+z=0⇒z=−12 x + z = 0 \Rightarrow z = -\tfrac{1}{2} . Length: x+y−z=0⇒y=−12−12=−1 x + y - z = 0 \Rightarrow y = -\tfrac{1}{2} - \tfrac{1}{2} = -1 .
f=k T1/2L−1m−1/2=kLTm,sof∝1LTm f = k\,T^{1/2}L^{-1}m^{-1/2} = \frac{k}{L}\sqrt{\frac{T}{m}}, \qquad\text{so}\qquad f \propto \frac{1}{L}\sqrt{\frac{T}{m}}
(This is question 13a again. Tighten a guitar string and it plays higher; press it shorter on the fret and it plays higher; a thick, heavy string plays lower: all three are in the formula.)