Skip to content

← Fix It, in Practice

Bicycles · 21 of 58

Put a slipped chain back on

Expert guidance

What you need

A twig or an old rag. The chain is greasy.

Do this

  1. Stop and get off, somewhere safe off the road.
  2. Lift the back wheel and turn the pedals by hand. This alone sometimes does it.
  3. With gears: push the rear gear arm (the derailleur) forward to slacken the chain.
  4. Lift the chain onto the front teeth with the twig or rag.
  5. Keep your fingers out from between chain and teeth. Only then turn the pedals slowly by hand, with the back wheel lifted.
  6. Ride gently. If it keeps coming off, look at how slack or how worn it is.

Why this way

Bad gear changes, a chain that’s too long or a worn chain all make it slip. This may take a few tries. Expert guidance.

Do it today

With the bike standing still, push the rear gear arm forward and watch the chain go slack, so you know how before you need it. Two minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix