Skip to content

← Fix It, in Practice

Bicycles · 23 of 58

Measure your chain with a ruler

Expert guidance

What you need

A ruler marked in inches.

Do this

  1. Clean the part of the chain you’ll measure.
  2. Put the ruler’s zero on the middle of one pin.
  3. Count 24 more pins. On a new chain, the last one sits exactly on the 12-inch mark.
  4. More than 1/16 inch past the mark? Replace the chain.
  5. Quick check: pull the chain away from the front teeth at the front. A lot of daylight means it’s worn, or nearly.

Why this way

The pins and rollers wear, so the chain seems to stretch and stops meshing with the teeth. It slips under load. A cheap chain changed in time saves dearer parts. This is a rough test. A bicycle shop has a proper gauge. Expert guidance.

Do it today

Measure your chain, and write down the date and the reading. Five minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix