Bicycles · 22 of 58
Clean and oil your chain
Expert guidance
What you need
Chain oil, a stiff brush, soapy water, rags and old newspaper. Degreaser if you have it.
Do this
- Stand the bike against something firm, so you can pedal backward. Lay paper under the chain.
- Keep fingers away from the teeth. Scrub the chain with the brush as you turn the pedals backward, with degreaser or soapy water.
- Rinse with soapy water and run the chain through a dry rag.
- Let it dry. It must be oiled after cleaning.
- Put one small drop on each link’s pin.
- Wipe off the extra with a clean rag. Extra oil picks up dirt.
Why this way
A clean chain lasts longer, shifts better, and saves the teeth it runs on. Heavy rain washes oil out, so oil again after monsoon rides. Expert guidance.
Do it today
Run a dry rag along your chain. Black and gritty, or dry and squeaky? Clean and oil it. Twenty minutes.
Where these facts come from
- How to Clean and Lubricate a Chain, Park Tool.
- Repairing On-The-Ride, Park Tool.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
