Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
27 questions
Unit 2 · Ionic Equilibrium
Printable PDFs
- Study notes 3 pages
- Worksheet 4 pages Answer key
B. Short answer questions
Define each, with one example: a. Brønsted acid; b. Brønsted base; c. Lewis acid; d. Lewis base; e. conjugate acid.
Answer
- a.Brønsted acid: a species that donates a proton (H⁺) to another species. Example: HCl, in .
- b.Brønsted base: a species that accepts a proton from another species. Example: NH₃, in .
- c.Lewis acid: a species that accepts an electron pair. Example: BF₃, in .
- d.Lewis base: a species that donates an electron pair. Example: NH₃ in the same reaction.
- e.Conjugate acid: the species formed when a base gains one proton. Example: NH₄⁺ is the conjugate acid of NH₃.
Write two differences between:
- a.a conjugate acid and a conjugate base
- b. and
- c.the hydrolysis of sodium acetate and the hydrolysis of ammonium chloride
- d.solubility and solubility product
- e.an acid salt and a basic salt
Answer
a.
| Conjugate acid | Conjugate base |
|---|---|
| formed when a base gains one proton | formed when an acid loses one proton |
| has one H more, and a charge one higher, than its base (NH₃ → NH₄⁺) | has one H fewer, and a charge one lower, than its acid (CH₃COOH → CH₃COO⁻) |
b.
| dissociation constant of a weak acid, | dissociation constant of a weak base, |
| the larger it is, the more H⁺ the acid gives | the larger it is, the more OH⁻ the base gives |
c.
| Sodium acetate | Ammonium chloride |
|---|---|
| salt of a weak acid and a strong base | salt of a strong acid and a weak base |
| anionic hydrolysis: , solution basic (pH > 7) | cationic hydrolysis: , solution acidic (pH < 7) |
d.
| Solubility | Solubility product |
|---|---|
| the most solute that dissolves in a given amount of solvent (g/L or mol/L) | the product of the ion concentrations in a saturated solution, each to the power of its coefficient |
| changes with a common ion in the solution (AgCl is less soluble in NaCl solution) | a constant at a given temperature, the same with or without a common ion |
e.
| Acid salt | Basic salt |
|---|---|
| formed by partial neutralization of an acid: still has replaceable hydrogen | formed by partial neutralization of a base: still has hydroxide (or oxide) |
| NaHSO₄, NaHCO₃, NaH₂PO₄ | Mg(OH)Cl, basic copper carbonate CuCO₃·Cu(OH)₂ |
Give reasons:
- a.Water is an amphoteric substance.
- b.Phosphine (PH₃) is a Lewis base.
- c.The pH of 10⁻⁷ M HCl is not 7.
- d.Ostwald’s dilution law does not apply to strong electrolytes.
- e.HCl is added before H₂S is passed in the analysis of group II metal ions.
Answer
- a.Water can both give and take a proton: with HCl it accepts one (), acting as a base, and with NH₃ it gives one (), acting as an acid. So it is amphoteric (amphiprotic).
- b.The phosphorus atom in PH₃ has a lone pair of electrons, which it can donate to an electron-pair acceptor (as to H⁺, giving PH₄⁺, or to a metal ion). A donor of an electron pair is a Lewis base.
- c.The acid gives 10⁻⁷ mol/L of H⁺, and water itself gives about as much again, which can no longer be ignored. Solving [H⁺] = 10⁻⁷ + /[H⁺] gives [H⁺] = 1.62 × 10⁻⁷ mol/L, so pH = 6.79: slightly acidic, as an acid solution must be.
- d.A strong electrolyte is completely ionized at every concentration: there are no un-ionized molecules in equilibrium with its ions, and α = 1 always. The law describes the equilibrium of a partly ionized electrolyte, so it has nothing to apply to.
- e.H₂S is a weak acid, . The H⁺ from HCl (a common ion) suppresses its ionization, so [S²⁻] stays very low: enough to precipitate only the group II sulphides, which have very small solubility products, while the sulphides of later groups (ZnS, MnS, NiS, CoS) stay dissolved.
Ammonia can act as a Brønsted base as well as a Lewis base.
- a.Why does NH₃ act as a Lewis base?
- b.Write an equation to show that ammonia is a Brønsted base, and name its conjugate acid.
- c.With a suitable equation, explain a reaction of the ammonia system with water in which water acts as a Brønsted base.
Answer
- a.The nitrogen atom of NH₃ has a lone pair of electrons, which it can donate to an electron-pair acceptor (H⁺, BF₃, Cu²⁺).
- b.: ammonia accepts a proton from water, so it is a Brønsted base, and its conjugate acid is the ammonium ion, NH₄⁺. (Water here is the acid, its conjugate base OH⁻.)
- c.With ammonia itself, water is the acid, not the base (b). Water acts as a Brønsted base towards the ammonium ion, the conjugate acid of ammonia:
Water accepts a proton from NH₄⁺ and becomes H₃O⁺, its conjugate acid. This is why ammonium chloride solution is acidic.
Laboratory-grade concentrated sulphuric acid is 98% pure (by mass), and its density is about 1.84 g/mL.
- a.What is meant by a concentrated acid?
- b.What is the concentration of this acid in grams per liter and in molarity? (H₂SO₄ = 98.08 g/mol)
- c.Calculate the pH of this acid.
Answer
- a.A concentrated acid has a large amount of acid in a small amount of water (here 98 g of H₂SO₄ in every 100 g). Concentrated is about how much acid is present, not how strong it is.
- b.1 L of the acid has a mass of 1840 g, of which 98% is H₂SO₄:
c. If both protons came off completely, [H⁺] = 2 × 18.4 = 36.8 mol/L and pH = −log 36.8 = −1.57. That is the formal answer, but it doesn’t describe the real liquid: with only 2% water there is too little water to ionize the acid (most of it is H₂SO₄ molecules), and pH is defined for dilute solutions. Its acidity is measured on other scales instead.
Ostwald’s dilution law relates the dissociation constant, the concentration and the degree of dissociation (α) of a weak electrolyte.
- a.Derive the relationship between and α for a weak acid.
- b.How does dilution affect the ionization of the acid?
- c.What is the limitation of this law?
Answer
a. Take C mol/L of a weak acid HA, a fraction α of which ionizes: .
At equilibrium: [HA] = C(1 − α), [H⁺] = [A⁻] = Cα.
For a weak acid α ≪ 1, so 1 − α ≈ 1 and , giving
where V = 1/C is the volume holding one mole.
- b.Diluting lowers C (raises V), so α increases: α ∝ √V. Diluting a weak acid 100 times makes it about 10 times as ionized.
- c.It applies only to weak electrolytes (strong ones are completely ionized); the form holds only while α is small (under about 5%), and at very low concentrations it even gives α > 1; and it uses concentrations, so it is accurate only in dilute solutions, where ions don’t affect one another much.
A flask contains 0.01 mol/L acetic acid, .
- a.Why is acetic acid considered a weak acid?
- b.What is meant by the dissociation constant, , of an acid?
- c.Calculate the pH of the acid.
Answer
- a.It ionizes only partly in water, : at this concentration only about 4 molecules in 100 have ionized, the rest staying as CH₃COOH. Its is small.
- b. is the equilibrium constant for the ionization of the acid, , at a given temperature. The larger it is, the stronger the acid.
- c.
α = 4.2%, under 5%, so the shortcut holds.
(Solved exactly, 3.39.)
Define the ionic product of water, . Discuss how changes with temperature, and explain its significance for the pH of neutral water at different temperatures.
Answer
is the product of the molar concentrations of H⁺ (H₃O⁺) and OH⁻ ions in water or any aqueous solution at a given temperature: , 1.0 × 10⁻¹⁴ at 25 °C.
The self-ionization of water, , is endothermic, so by Le Chatelier’s principle it goes further as the temperature rises: increases with temperature (1.14 × 10⁻¹⁵ at 0 °C, 1.0 × 10⁻¹⁴ at 25 °C, 5.47 × 10⁻¹⁴ at 50 °C).
In neutral water [H⁺] = [OH⁻] = , so the pH of neutral water is ½ pKw, which depends on the temperature: 7.47 at 0 °C, 7.00 at 25 °C, 6.63 at 50 °C. So pH 7 means neutral only at 25 °C; hot neutral water has a pH below 7 but is not acidic, because its [OH⁻] rises just as much as its [H⁺].
The solubility product constant, , is a measure of how soluble a compound is in water.
- a.Define the solubility product constant and write the expression for a binary salt such as AgCl.
- b.Calculate the solubility of AgCl in water, if at 25 °C.
- c.Why is the temperature given with a solubility product value?
Answer
- a.The solubility product of a sparingly soluble salt is the product of the molar concentrations of its ions in a saturated solution, each raised to the power of its coefficient, at a given temperature. For : .
- b., so 1.34 × 10⁻⁵ mol/L, or 1.34 × 10⁻⁵ × 143.32 = 1.92 × 10⁻³ g/L.
- c. is an equilibrium constant, and like every equilibrium constant it changes with temperature (most salts dissolve better when hot), so a value means something only with its temperature.
Aluminium sulphate, Al₂(SO₄)₃, gives 5 ions when it dissociates.
- a.Write the equation for its dissociation.
- b.Write its expression.
- c.Calculate its solubility if mol⁵ L⁻⁵ at room temperature.
Answer
- a.
- b.
- c.If s mol/L dissolves, [Al³⁺] = 2s and [SO₄²⁻] = 3s:
s = 0.0113 mol/L. (The number is for practice: real aluminium sulphate is very soluble in water.)
The example illustrates the common ion effect, which is used in the qualitative analysis of metal cations:
- a.Define the common ion effect. Explain how it affects the ionization of H₂S in this example.
- b.How is the effect used in salt analysis?
Answer
- a.The common ion effect is the suppression of the degree of ionization of a weak electrolyte by adding a strong electrolyte that has an ion in common with it. Here H⁺ is the common ion: HCl ionizes completely and raises [H⁺], so the equilibrium of the weak acid H₂S shifts to the left. H₂S ionizes less, and [S²⁻] becomes very small.
- b.In group II analysis, the solution is acidified with dilute HCl before H₂S is passed. The low [S²⁻] that results exceeds the solubility products only of the very insoluble group II sulphides (CuS, PbS, HgS, CdS, Bi₂S₃, SnS, As₂S₃, Sb₂S₃), so they alone precipitate; the later groups’ sulphides (ZnS, MnS, NiS, CoS) stay in solution. In the same way, NH₄Cl is added before NH₄OH in group IIIA, so that its NH₄⁺ suppresses the ionization of NH₄OH and only Fe(OH)₃, Al(OH)₃ and Cr(OH)₃ precipitate.
A salt’s hydrolysis can give an acidic, basic or neutral solution. One hydrolysis reaction is:
- a.Define hydrolysis.
- b.What kind of solution does this give, and why?
- c.Give an application of salt hydrolysis.
Answer
- a.Hydrolysis of a salt is the reaction of its cation, its anion, or both with water, which makes the solution acidic or basic; it is the reverse of neutralization.
- b.A basic solution. Sodium acetate is the salt of a weak acid and a strong base. The acetate ion takes protons from water, , leaving excess OH⁻ (NaOH is completely ionized, CH₃COOH hardly at all). A 0.1 mol/L solution has pH 8.9.
- c.Any one: potash alum (fitkiri) clears muddy water, because Al³⁺ hydrolyzes to a jelly of Al(OH)₃ that carries the mud down; baking soda solution is mildly basic and neutralizes stomach acid; washing soda (Na₂CO₃) solution is basic and helps remove grease; choosing the indicator for a titration depends on the hydrolysis of the salt formed.
Describe the hydrolysis of salts of: a. a strong acid and a strong base; b. a weak acid and a strong base; c. a weak base and a strong acid. How does hydrolysis affect the pH of the solution in each case?
Answer
- a.Strong acid and strong base (NaCl, KNO₃): neither ion reacts with water, so there is no hydrolysis. [H⁺] = [OH⁻], and the solution is neutral, pH 7 at 25 °C.
- b.Weak acid and strong base (CH₃COONa, Na₂CO₃): the anion reacts with water, (anionic hydrolysis), giving excess OH⁻: the solution is basic, pH > 7, with pH = 7 + ½(pKa + log C).
- c.Weak base and strong acid (NH₄Cl, CuSO₄): the cation reacts with water, (cationic hydrolysis), giving excess H⁺: the solution is acidic, pH < 7, with pH = 7 − ½(pKb + log C).
An acid–base titration of oxalic acid with sodium hydroxide is done with a suitable indicator.
- a.What is an acid–base indicator? Give two examples.
- b.Name the indicator suitable for this titration, and say why it is suitable.
- c.What happens to the accuracy of the titration if another indicator is used?
Answer
- a.An acid–base indicator is a weak acid or weak base whose two forms, un-ionized and ionized, have different colors; it changes color over a narrow pH range and is used to show the end point of a titration. Examples: phenolphthalein, methyl orange (also methyl red, litmus).
- b.Phenolphthalein. Oxalic acid is a weak acid (its two protons have about 5.6 × 10⁻² and 5.4 × 10⁻⁵) and NaOH a strong base, so at the equivalence point (both protons gone) the solution of sodium oxalate is basic (pH about 8.4), and the steep jump runs up to about 10. Phenolphthalein changes from colorless to pink at 8.2–10.0, inside the jump.
- c.An indicator that changes outside the jump marks the wrong point. Methyl orange (3.1–4.4) would change color long before the acid had all reacted, giving too small a volume of NaOH and a wrong (too low) concentration. Only an indicator whose range lies on the steep part gives the end point within a drop.
Discuss the role of indicators in acid–base titrations. How do you choose a suitable indicator for a. a strong acid–strong base titration; b. a weak acid–strong base titration?
Answer
An indicator shows the end point of a titration by a sudden color change, which should coincide with the equivalence point, where the acid and base have exactly reacted. It changes color over its pH range, about pKIn ± 1, so a suitable indicator is one whose range lies within the steep, nearly vertical part of the titration curve: there, one drop of titrant carries the pH right across its range.
- a.Strong acid–strong base (HCl with NaOH): the pH leaps from about 4 to 10 at the equivalence point (pH 7), so methyl orange, methyl red, bromothymol blue or phenolphthalein all work.
- b.Weak acid–strong base (CH₃COOH with NaOH): the equivalence point is basic (pH about 8.7, from the hydrolysis of sodium acetate) and the jump runs from about 7 to 10, so phenolphthalein (8.2–10.0) is used; methyl orange would change far too early.
Explain acidic, basic and neutral salts with two examples of each. How does the nature of the parent acid and base decide the properties of the salt?
Answer
A salt’s solution is acidic, basic or neutral according to which of its parents was weak, because only an ion from a weak acid or a weak base reacts with water (hydrolysis):
- Acidic salts (in this sense: their solutions are acidic), from a strong acid and a weak base: NH₄Cl, CuSO₄ (also FeCl₃, NH₄NO₃). The cation of the weak base gives H⁺: , so pH < 7.
- Basic salts (solutions basic), from a weak acid and a strong base: CH₃COONa, Na₂CO₃ (also KCN, HCOOK). The anion of the weak acid takes H⁺ from water: , so pH > 7.
- Neutral salts, from a strong acid and a strong base: NaCl, KNO₃ (also Na₂SO₄). Neither ion reacts with water, so pH = 7. A salt of a weak acid and a weak base of equal strength, such as ammonium acetate, is also neutral.
The stronger parent “wins”: the salt’s solution is on the side of the stronger of the acid and base it came from. (By composition, an acid salt still has replaceable hydrogen, NaHSO₄ or NaHCO₃, and a basic salt still has hydroxide, Mg(OH)Cl: see 2.16.)
C. Long answer questions
A mixture of acetic acid and sodium acetate is an acidic buffer.
- a.What is an acidic buffer? Give another example of such a buffer system.
- b.What is the use of buffers in the human body?
- c.What is the mechanism of buffer action in this buffer?
- d.Calculate the pH of this buffer using the Henderson–Hasselbalch equation ().
Answer
- a.An acidic buffer is a mixture of a weak acid and its salt with a strong base, which keeps a pH below 7 and resists changes in it when a little acid or base is added. Another example: formic acid and sodium formate (HCOOH/HCOONa), or carbonic acid and sodium hydrogencarbonate.
- b.Enzymes and other proteins work only in a narrow pH range, so body fluids are buffered: blood by carbonic acid and hydrogencarbonate (pH 7.35–7.45), the inside of cells and saliva by phosphate (H₂PO₄⁻/HPO₄²⁻), and proteins (such as hemoglobin) act as buffers too. A blood pH outside about 6.8–7.8 is fatal.
- c.Sodium acetate is completely ionized, so the buffer has a large store of CH₃COO⁻; acetic acid, weak and further suppressed by the common ion, is a large store of CH₃COOH molecules.
Added acid is taken up by acetate: .
Added base is neutralized by acetic acid: .
Either way only the ratio [CH₃COO⁻]/[CH₃COOH] changes, and only slightly, so the pH barely moves.
d. The question gives no concentrations. If the buffer has equal concentrations of acetic acid and sodium acetate, the usual case:
The question gives no concentrations, so this assumes equal amounts; for any other mixture, put its ratio into the same equation.
The solubility products of some sparingly soluble salts at 25 °C are:
| Salt | Solubility equilibrium | |
|---|---|---|
| Aluminium hydroxide | 1.3 × 10⁻³³ | |
| Barium carbonate | 2.6 × 10⁻⁹ | |
| Barium sulphate | 1.1 × 10⁻¹⁰ | |
| Calcium carbonate | 2.8 × 10⁻⁹ | |
| Calcium fluoride | 5.3 × 10⁻⁹ | |
| Calcium sulphate | 9.1 × 10⁻⁶ | |
| Calcium oxalate | 2.7 × 10⁻⁹ | |
| Chromium(III) hydroxide | 6.3 × 10⁻³¹ | |
| Copper(II) sulphide | 8.7 × 10⁻³⁶ | |
| Iron(III) hydroxide | 4 × 10⁻³⁸ | |
| Lead(II) chloride | 1.6 × 10⁻⁵ | |
| Lead(II) chromate | 2.8 × 10⁻¹³ |
- a.Define the solubility product and a sparingly soluble salt.
- b.Calculate the solubility of CaSO₄ and of Fe(OH)₃ in moles per liter and grams per liter.
- c.Use the table to compare the solubility of CaCO₃ with that of BaSO₄.
Answer
- a.The solubility product of a salt is the product of the molar concentrations of its ions in a saturated solution, each raised to the power of its coefficient in the equilibrium equation, at a given temperature. A sparingly soluble salt is one of which only a very small amount dissolves in water (roughly, less than about 0.01 mol/L), such as AgCl or BaSO₄; what does dissolve is completely ionized.
- b.CaSO₄ (1 : 1): 3.02 × 10⁻³ mol/L. Molar mass 136.14 g/mol, so 3.02 × 10⁻³ × 136.14 = 0.411 g/L.
Fe(OH)₃: [Fe³⁺] = s, [OH⁻] = 3s, so .
Molar mass 106.87 g/mol: 1.96 × 10⁻¹⁰ × 106.87 = 2.1 × 10⁻⁸ g/L.
(This treats the OH⁻ as coming only from the salt. In real water, its own OH⁻, 10⁻⁷ mol/L, is far more than 3s, so the true solubility is even smaller, about mol/L: iron(III) hydroxide is about as insoluble as anything gets.)
c. Both are 1 : 1 salts, so their can be compared directly: CaCO₃, mol/L; BaSO₄, mol/L. Calcium carbonate is about 5 times as soluble as barium sulphate (by moles).
The graph shows how the pH changes as a base is added from the burette to an acid.
- a.What is the trend in pH as base is added, and why?
- b.What is the starting pH, and what does it show about the acid?
- c.Name a suitable indicator for this titration, and give the reason.
- d.Draw the graph for the same titration with the acid in the burette instead of the flask.
Answer
- a.The pH rises slowly at first, through a flat buffer region (the flask holds the weak acid and its salt, so it resists change), then jumps steeply around 25 mL, the equivalence point, and finally levels off as excess NaOH builds up. The jump comes because once the acid is used up, the next drop of alkali has nothing left to neutralize it.
- b.It starts at about pH 3 (2.9), well above the pH 1 of a strong acid of the same concentration: the acid is only partly ionized, so it is a weak acid (acetic acid). The equivalence point being basic, about 8.7, says the same: the salt of a weak acid hydrolyzes.
- c.Phenolphthalein: it changes from colorless to pink at pH 8.2–10.0, inside the steep jump (about 7 to 10), so it changes within a drop of the equivalence point. Methyl orange (3.1–4.4) would change in the buffer region, long before the end.
- d.With NaOH in the flask and acid run in from the burette, the curve is the mirror image: it starts high (pH 13 for 0.1 mol/L NaOH), falls slowly, drops steeply around the equivalence point (from about 10 to 7), and then levels off in the acetate buffer region, approaching the pH of the acid:
The graph shows the pH against the volume of alkali added for two titrations.
- a.What is the starting pH of the HCl, and why does the pH rise as NaOH is added?
- b.At what pH is there a sharp change in the titration of HCl with NaOH?
- c.Name the indicator that is suitable for titrating acetic acid with NaOH, and say why.
Answer
- a.pH 1: 0.1 mol/L HCl is completely ionized, so [H⁺] = 0.1 mol/L. The pH rises because the added OH⁻ ions neutralize H⁺ (), so [H⁺] falls; after the equivalence point excess OH⁻ makes it basic.
- b.Around the equivalence point, at 25 mL: the pH leaps from about 3–4 to 10–11 (3.7 at 24.9 mL, 10.3 at 25.1 mL), centered on pH 7.
- c.Phenolphthalein: the acetic acid curve’s equivalence point is at pH 8.7 and its steep part runs from about 7 to 10; phenolphthalein’s range, 8.2–10.0, lies inside it. Methyl orange’s range (3.1–4.4) lies in the buffer region, where the acid is still far from neutralized.
Amino acids, the building blocks of proteins, are amphoteric. An amino acid has the structure H₂N–CH(R)–COOH, where R is a different group in each amino acid.
- a.What is an amphoteric substance?
- b.Why are amino acid molecules amphoteric?
- c.Write the reactions of an amino acid with a hydrogen ion and with a hydroxide ion, showing its amphoteric nature.
Answer
- a.An amphoteric substance can act both as an acid and as a base, depending on what it reacts with.
- b.An amino acid molecule has a basic amino group, −NH₂, whose nitrogen has a lone pair that can take a proton, and an acidic carboxyl group, −COOH, which can give a proton. So it can both accept and donate protons (it is amphiprotic).
- c.With glycine (R = H):
As a base, with H⁺:
As an acid, with OH⁻:
In general: and .
A buffer solution is made by mixing 0.050 mol/L acetic acid and 0.050 mol/L sodium acetate ().
- a.What is a buffer solution? What is the role of buffers in the human body?
- b.Calculate the pH of this buffer.
- c.Calculate the change in pH when 0.001 mol of hydrochloric acid is added to one liter of it (the change in volume is negligible).
- d.Compare this with the pH when the same amount of HCl is added to a liter of pure water.
Answer
- a.A buffer solution resists a change in its pH when a small amount of acid or base is added. In the body, buffers keep the pH of blood (7.35–7.45, by carbonic acid and hydrogencarbonate) and of the fluid inside cells (by phosphate and proteins) in the narrow range in which enzymes work.
- b.pKa = −log(1.75 × 10⁻⁵) = 4.757.
c. The HCl turns acetate into acetic acid: . Now [salt] = 0.050 − 0.001 = 0.049 and [acid] = 0.050 + 0.001 = 0.051 mol/L:
The pH falls by only 0.017.
d. In pure water, 0.001 mol of HCl in a liter gives [H⁺] = 0.001 mol/L: the pH falls from 7.00 to 3.00, a change of 4 units, about 230 times as large as in the buffer.
A buffer solution is made by mixing 0.1 mol/L formic acid (HCOOH) and 0.05 mol/L sodium formate (HCOONa).
- a.What is an acidic buffer, and why is formic acid–sodium formate one? Give another example of an acidic buffer.
- b.Explain the role of buffers in keeping the pH steady in living things, such as in blood.
- c.Calculate the pH of this buffer with the Henderson–Hasselbalch equation, given of formic acid = 1.77 × 10⁻⁴.
Answer
- a.An acidic buffer is a mixture of a weak acid and its salt with a strong base; it holds a pH below 7. Formic acid is a weak acid and sodium formate its salt with the strong base NaOH, so together they hold the pH steady: formate takes up added H⁺ () and formic acid neutralizes added OH⁻ (). Another example: acetic acid and sodium acetate.
- b.In blood, the carbonic acid–hydrogencarbonate buffer takes up acids from metabolism (, the CO₂ breathed out) and bases (), keeping the pH at 7.35–7.45, where enzymes, hemoglobin and nerves work properly.
- c.pKa = −log(1.77 × 10⁻⁴) = 3.752.
The solubility products of two sparingly soluble salts are: BaSO₄, 1.1 × 10⁻¹⁰, and Ag₂SO₄, 1.2 × 10⁻⁵.
- a.What are a solubility product and a sparingly soluble salt?
- b.Write the expressions for BaSO₄ and Ag₂SO₄.
- c.Calculate the solubility of each in moles per liter and grams per liter, in pure water.
- d.Which salt precipitates first from a solution of its ions, and why?
Answer
- a.The solubility product is the product of the molar concentrations of the ions in a saturated solution, each raised to the power of its coefficient, at a given temperature. A sparingly soluble salt dissolves only very slightly in water.
- b.; .
- c.BaSO₄: 1.05 × 10⁻⁵ mol/L; × 233.4 g/mol = 2.45 × 10⁻³ g/L.
Ag₂SO₄: , 1.44 × 10⁻² mol/L; × 311.8 g/mol = 4.50 g/L.
d. Barium sulphate precipitates first. It is about 1,400 times less soluble (by moles), so as sulphate is added to a solution containing Ba²⁺ and Ag⁺ at similar concentrations, the ionic product [Ba²⁺][SO₄²⁻] passes its tiny at a far lower [SO₄²⁻] than Ag₂SO₄ needs.
The table gives [H⁺], pH, [OH⁻] and pOH for several solutions at 25 °C.
- a.Define pH and pOH, and write the relationship between them.
- b.Complete the table.
| [H⁺] (mol/L) | pH | [OH⁻] (mol/L) | pOH | Acid or base | |
|---|---|---|---|---|---|
| 1. | 1 × 10⁻⁶ | 6 | 1 × 10⁻⁸ | 8 | acid |
| 2. | 1 × 10⁻⁹ | 9 | 1 × 10⁻⁵ | ? | base |
| 3. | 2.5 × 10⁻⁹ | 8.6 | ? | 5.4 | base |
| 4. | 4.0 × 10⁻¹² | 11.4 | 2.5 × 10⁻³ | 2.6 | ? |
| 5. | 2.5 × 10⁻⁸ | ? | ? | 6.4 | base |
| 6. | 1.6 × 10⁻⁵ | 4.8 | ? | 9.2 | acid |
| 7. | ? | ? | 3.16 × 10⁻¹² | 11.50 | acid |
| 8. | 1.6 × 10⁻⁶ | 5.8 | ? | 8.2 | acid |
| 9. | ? | ? | ? | 12.7 | ? |
| 10. | 1.3 × 10⁻¹⁰ | ? | ? | ? | ? |
| 11. | ? | 6.48 | 3.00 × 10⁻⁸ | 7.52 | acid |
Answer
- a.pH = −log[H⁺] and pOH = −log[OH⁻] (concentrations in mol/L). Since [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ at 25 °C, pH + pOH = 14.
- b.Use pH + pOH = 14, [H⁺] = 10⁻ᵖᴴ, [OH⁻] = 10⁻ᵖᴼᴴ = 10⁻¹⁴/[H⁺]; pH < 7 is acid, pH > 7 base.
| [H⁺] (mol/L) | pH | [OH⁻] (mol/L) | pOH | Acid or base | |
|---|---|---|---|---|---|
| 1. | 1 × 10⁻⁶ | 6 | 1 × 10⁻⁸ | 8 | acid |
| 2. | 1 × 10⁻⁹ | 9 | 1 × 10⁻⁵ | 5 | base |
| 3. | 2.5 × 10⁻⁹ | 8.6 | 4.0 × 10⁻⁶ | 5.4 | base |
| 4. | 4.0 × 10⁻¹² | 11.4 | 2.5 × 10⁻³ | 2.6 | base |
| 5. | 2.5 × 10⁻⁸ | 7.60 | 4.0 × 10⁻⁷ | 6.4 | base |
| 6. | 1.6 × 10⁻⁵ | 4.8 | 6.3 × 10⁻¹⁰ | 9.2 | acid |
| 7. | 3.16 × 10⁻³ | 2.50 | 3.16 × 10⁻¹² | 11.50 | acid |
| 8. | 1.6 × 10⁻⁶ | 5.8 | 6.3 × 10⁻⁹ | 8.2 | acid |
| 9. | 5.0 × 10⁻² | 1.3 | 2.0 × 10⁻¹³ | 12.7 | acid |
| 10. | 1.3 × 10⁻¹⁰ | 9.89 | 7.7 × 10⁻⁵ | 4.11 | base |
| 11. | 3.3 × 10⁻⁷ | 6.48 | 3.00 × 10⁻⁸ | 7.52 | acid |
An acid–base reaction is shown below.
- a.Identify the acid and the base, and say why they are called so.
- b.Name the concept that explains this reaction.
- c.Write the similar reactions of NH₃ with water and of BF₃ with water.
- d.What are the limitations of this concept?
Answer
- a.BF₃ is the acid: boron has only six electrons round it (an incomplete octet), so it accepts an electron pair. NH₃ is the base: its nitrogen has a lone pair, which it donates. The pair makes a coordinate bond, B←N.
- b.The Lewis concept of acids and bases (G. N. Lewis, 1923): an acid accepts an electron pair, a base donates one.
- c.NH₃ with water: ammonia’s lone pair takes a proton from water (the H⁺ is the electron-pair acceptor):
BF₃ with water: here water is the Lewis base, giving a lone pair on its oxygen to boron:
(The adduct then reacts further with more water: boron trifluoride is hydrolyzed, finally to boric acid and fluoroboric acid, .)
d. It doesn’t fit protonic acids such as HCl and H₂SO₄ well, since they don’t accept an electron pair themselves (their H⁺ does); and it gives no measure of the relative strengths of acids and bases, since the strength of a Lewis acid depends on the base it meets.
Solve these numerical problems.
- a.Calculate the solubility product of PbCl₂ (M = 278.1 g/mol), if 50.0 mL of a saturated solution contains 0.2207 g of PbCl₂.
- b.A solution is 0.010 mol/L in barium chloride and 0.020 mol/L in strontium chloride. Can Ba²⁺ or Sr²⁺ be precipitated selectively by adding concentrated sodium sulphate solution? Which ion precipitates first? (: BaSO₄ 1.1 × 10⁻¹⁰, SrSO₄ 3.4 × 10⁻⁷)
- c.Estimate the molar solubility of Ag₂CrO₄ in pure water, if its solubility product is 1.1 × 10⁻¹².
Answer
a. Solubility = 0.2207 g ÷ 0.0500 L = 4.414 g/L; molar solubility s = 4.414 ÷ 278.1 = 1.587 × 10⁻² mol/L.
, so 1.60 × 10⁻⁵ mol³ L⁻³.
b. Each ion starts to precipitate when [Ba²⁺][SO₄²⁻] or [Sr²⁺][SO₄²⁻] reaches its :
Ba²⁺ precipitates first, at a sulphate concentration about 1,500 times lower. When the sulphate reaches 1.7 × 10⁻⁵ mol/L and SrSO₄ starts to come down, the Ba²⁺ left is
only 0.065% of the barium it started with. So yes: adding sulphate slowly separates almost all the barium before any strontium precipitates.
c. , so
