Skip to content

← Grade 12 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

28 questions

Unit 3 · Chemical Kinetics

Printable PDFs

Answer these questions

26.

Define:

  • a.rate of reaction and rate constant
  • b.activation energy and activated complex
Answer
  • a.The rate of reaction is the change in concentration of a reactant or product per unit time (mol L⁻¹ s⁻¹). The rate constant k is the constant of proportionality in the rate law, rate = k[A]ˣ[B]ʸ: the rate when every concentration in the rate law is 1 mol/L. It depends on the reaction and the temperature, not on concentration.
  • b.The activation energy is the minimum energy that colliding particles must have for a reaction to occur: the height of the energy barrier above the reactants. The activated complex is the short-lived, high-energy arrangement of atoms at the top of that barrier, with old bonds partly broken and new ones partly formed; it goes on to products or back to reactants.
27.

Tell the difference between:

  • a.average rate and instantaneous rate
  • b.order and molecularity
  • c.a first-order and a second-order reaction
  • d.homogeneous and heterogeneous catalysis
Answer
  • a.The average rate is the change in concentration over a finite interval, −Δ[R]/Δt, the slope of a chord on the concentration–time graph. The instantaneous rate is the rate at one moment, −d[R]/dt, the slope of the tangent there.
  • b.Order is the sum of the powers of the concentrations in the experimental rate law; it is measured, and can be 0, a fraction or negative, and belongs to the overall reaction. Molecularity is the number of particles colliding in one elementary step; it comes from the mechanism and is always 1, 2 or 3.
  • c.In a first-order reaction, rate = k[A]: doubling [A] doubles the rate; k is in s⁻¹; log [A] against t is a straight line; the half-life, 0.693/k, doesn’t depend on [A]₀. In a second-order reaction, rate = k[A]² or k[A][B]: doubling [A] makes rate = k[A]² four times as great; k is in L mol⁻¹ s⁻¹; 1/[A] against t is straight; the half-life, 1/(k[A]₀), gets longer as [A]₀ falls.
  • d.In homogeneous catalysis the catalyst is in the same phase as the reactants (H⁺ ions catalyzing esterification in solution); in heterogeneous catalysis it is in a different phase, usually a solid with gaseous or liquid reactants (iron in the Haber process).
28.

What is meant by the rate of a chemical reaction? What are its units? Suggest two reactions that are very slow (days or longer) and two that are very fast (over in seconds or minutes).

Answer

The rate of a reaction is the change in concentration of a reactant or product per unit time. Its units are mol L⁻¹ s⁻¹ (or mol L⁻¹ min⁻¹, and so on); for gases, also atm s⁻¹.
Very slow: the rusting of iron; the fermentation of grain or fruit juice into alcohol (days); the weathering of rocks; the formation of petroleum or coal.
Very fast: neutralization of an acid by an alkali, HCl + NaOH; precipitation, such as silver nitrate and sodium chloride giving AgCl; the burning of a match or of cooking gas; an explosion.

29.

Distinguish between the average rate and the instantaneous rate. Which of the two gives the more precise measure, and why?

Answer

The average rate is over an interval of time (slope of a chord); the instantaneous rate is at one moment (slope of a tangent, Δt → 0).
The instantaneous rate is more precise: the rate keeps changing during a reaction, so an average over an interval blurs fast and slow parts together and depends on the interval chosen. The instantaneous rate is the exact rate at that moment and at those concentrations, which is what a rate law describes.

30.

Define the initial rate. What are the advantages of measuring the initial rate of a reaction?

Answer

The initial rate is the instantaneous rate at the start of the reaction, t = 0: the slope of the tangent to the concentration–time curve at the beginning.
Advantages: the starting concentrations are known exactly (they are what was mixed); almost no product has formed yet, so a backward reaction or a product that speeds up or slows down the reaction can’t interfere; and by changing one starting concentration at a time, the order with respect to each reactant can be found (the initial rates method).

31.

What is a rate law? Write the rate expressions for these reactions in terms of the disappearance of the reactants and the appearance of the products:

  • a.H₂(g) + I₂(g) → 2HI(g)
  • b.N₂ + 3H₂ → 2NH₃
Answer

A rate law is the equation, found by experiment, that gives the rate of a reaction in terms of the concentrations of its reactants: rate = k[A]ˣ[B]ʸ.

  • a.rate=−d[HX2]dt=−d[IX2]dt=+12d[HI]dt \text{rate} = -\dfrac{d[\ce{H2}]}{dt} = -\dfrac{d[\ce{I2}]}{dt} = +\dfrac{1}{2}\dfrac{d[\ce{HI}]}{dt}
  • b.rate=−d[NX2]dt=−13d[HX2]dt=+12d[NHX3]dt \text{rate} = -\dfrac{d[\ce{N2}]}{dt} = -\dfrac{1}{3}\dfrac{d[\ce{H2}]}{dt} = +\dfrac{1}{2}\dfrac{d[\ce{NH3}]}{dt}

(These say how the changes of each substance are related. The rate laws, how the rate depends on concentrations, must be measured: for H₂ + I₂ it is rate = k[H₂][I₂].)

32.

Define the rate constant. State the units of k for each rate equation:

  • a.rate = k[NO]²
  • b.rate = k[NH₃]⁰
  • c.rate = k[BrO₃⁻][Br⁻][H⁺]²
Hint

Unit of k = (mol L⁻¹)¹⁻ⁿ s⁻¹, with n the overall order.

Answer

The rate constant is the proportionality constant in the rate law, equal to the rate when all the concentrations in it are 1 mol/L.

  • a.Second order: k = rate/[NO]² → L mol⁻¹ s⁻¹.
  • b.Zero order: k = rate → mol L⁻¹ s⁻¹.
  • c.Order 1 + 1 + 2 = 4: (mol L⁻¹)¹⁻⁴ s⁻¹ = L³ mol⁻³ s⁻¹.
33.

Nitrogen monoxide reacts with oxygen at 0.066 mol L⁻¹ s⁻¹ to form nitrogen dioxide:
2 NO(g)+OX2(g)→2 NOX2(g) \ce{2NO(g) + O2(g) -> 2NO2(g)}

  • a.Write the rate expression for this reaction in terms of each substance.
  • b.Calculate the rate of formation of NO₂.
Hint

2 mol of NO give 2 mol of NO₂.

Answer
  • a.rate=−12d[NO]dt=−d[OX2]dt=+12d[NOX2]dt \text{rate} = -\dfrac{1}{2}\dfrac{d[\ce{NO}]}{dt} = -\dfrac{d[\ce{O2}]}{dt} = +\dfrac{1}{2}\dfrac{d[\ce{NO2}]}{dt} . (Its measured rate law is rate = k[NO]²[O₂].)
  • b.NO₂ forms as fast as NO is used: d[NOX2]dt=−d[NO]dt= \dfrac{d[\ce{NO2}]}{dt} = -\dfrac{d[\ce{NO}]}{dt} = 0.066 mol L⁻¹ s⁻¹. (Oxygen is used at 0.033 mol L⁻¹ s⁻¹, which is also the rate of the reaction.)
34.

The rate constant for the decomposition of dinitrogen pentoxide, N₂O₅, dissolved in chloroform (CHCl₃) at 45 °C is 6.2 × 10⁻⁴ min⁻¹.
2 NX2OX5→4 NOX2+OX2 \ce{2N2O5 -> 4NO2 + O2}

  • a.What is the order of the reaction, and how do you know?
  • b.What is its molecularity?
  • c.What is the rate of the reaction when [N₂O₅] = 0.40 M?
Answer
  • a.First order: the unit of k is min⁻¹ (time⁻¹), which only a first-order rate constant has.
  • b.Molecularity belongs to elementary steps, and this reaction is not one, so the overall equation has no molecularity (it is certainly not 2, though two N₂O₅ appear in it). It goes in steps: N₂O₅ splits into NO₂ and NO₃ and they recombine, a fast equilibrium (NX2OX5⇌NOX2+NOX3 \ce{N2O5 <=> NO2 + NO3} , unimolecular one way); the slow step is a bimolecular collision of the NO₂ and NO₃ formed; then NO₃ and NO quickly give 2NO₂. The rate still comes out proportional to [N₂O₅], which is why the order is 1.
  • c.rate = k[N₂O₅] = 6.2 × 10⁻⁴ × 0.40 = 2.5 × 10⁻⁴ mol L⁻¹ min⁻¹.
35.

For the reaction Q → W + X these data were obtained at 30 °C:

[Q] initial (M) 0.170 0.212 0.357
Rate (mol L⁻¹ s⁻¹) 6.68 × 10⁻³ 1.04 × 10⁻² 2.94 × 10⁻²
  • a.What is the order with respect to Q?
  • b.What is the value of the rate constant?
  • c.Write the rate law.
Hint

Compare the ratio of the rates with the ratio of the concentrations: is it the same, or its square?

Answer
  • a.From the first to the third run, [Q] rises 0.357/0.170 = 2.10 times, and the rate 2.94 × 10⁻²/6.68 × 10⁻³ = 4.40 times. 2.10² = 4.41, so the rate goes as [Q]²: second order. (The first two runs agree: 1.247² = 1.555, and the rates rise 1.557 times.)
  • b.k=rate[Q]2=6.68×10−3(0.170)2= k = \dfrac{\text{rate}}{[\ce{Q}]^2} = \dfrac{6.68 \times 10^{-3}}{(0.170)^2} = 0.231 L mol⁻¹ s⁻¹ (the other runs give 0.231 too).
  • c.rate = k[Q]², with k = 0.231 L mol⁻¹ s⁻¹.
36.

What is meant by the rate law of a reaction? What are the units of the rate constants of zero-order, first-order and second-order reactions?

Answer

The rate law is the experimentally found equation giving the rate in terms of the concentrations of the reactants, each raised to a power (its order): rate = k[A]ˣ[B]ʸ.
Units of k: zero order mol L⁻¹ s⁻¹; first order s⁻¹; second order L mol⁻¹ s⁻¹.

37.

For the reaction A + B → C:

Initial rate of disappearance (mol L⁻¹ s⁻¹) [A] (mol/L) [B] (mol/L)
0.053 0.10 0.50
0.127 0.20 0.30
1.02 0.40 0.60
0.254 0.20 0.60
0.509 0.40 0.30
  • a.Find the order with respect to A and to B.
  • b.Find the rate when [A] = 0.5 mol/L and [B] = 0.3 mol/L.
Hint

Find two runs in which [A] is the same and [B] changes, and two in which [B] is the same and [A] changes.

Answer
  • a.Runs 2 and 4 ([A] = 0.20 in both): [B] doubles, 0.30 → 0.60, and the rate doubles, 0.127 → 0.254: first order in B. Runs 2 and 5 ([B] = 0.30 in both): [A] doubles, 0.20 → 0.40, and the rate becomes 0.509/0.127 = 4 times as great: second order in A. So rate = k[A]²[B], third order overall.
  • b.From run 2, k=0.127(0.20)2(0.30)=10.6 L2 mol−2 s−1 k = \dfrac{0.127}{(0.20)^2(0.30)} = 10.6 \text{ L}^2\,\text{mol}^{-2}\,\text{s}^{-1} (run 1 gives the same: 0.053/(0.01 × 0.50) = 10.6).

Rate = 10.6 × (0.5)² × 0.3 = 0.79 mol L⁻¹ s⁻¹.

38.

For a first-order reaction, how long does it take for the concentration of the reactant to fall to one-eighth of its starting value? Give the answer in terms of the half-life t½ and in terms of the rate constant k.

Answer

⅛ = (½)³: three half-lives, *t = 3*t½**. Since t½ = 0.693/k, t* = 2.079/*k (or from the integrated equation, t = (2.303/k) log 8 = 2.079/k).

39.

At the same concentrations, the reaction CO(g) + Cl₂(g) → COCl₂(g) is 1.50 × 10³ times as fast at 250 °C as at 150 °C. Calculate the activation energy, assuming the frequency factor is constant.

Hint

T₁ = 423 K, T₂ = 523 K and k₂/k₁ = 1500.

Answer

Ea=2.303 Rlog⁡k2k1(T1T2T2−T1)=2.303×8.314×log⁡1500×423×523523−423 E_a = 2.303\,R\log\frac{k_2}{k_1}\left(\frac{T_1T_2}{T_2 - T_1}\right) = 2.303 \times 8.314 \times \log 1500 \times \frac{423 \times 523}{523 - 423}
=2.303×8.314×3.176×2212=1.35×105 J/mol = 2.303 \times 8.314 \times 3.176 \times 2212 = 1.35 \times 10^5 \text{ J/mol}
Eₐ ≈ 135 kJ/mol.

40.

The half-life of a first-order reaction is 20 min. How long does it take for the concentration of the reactant to change from 0.08 M to 0.01 M?

Answer

0.08 → 0.04 → 0.02 → 0.01 M is three halvings: 3 × 20 = 60 min. (By the formula: k = 0.693/20 = 0.03465 min⁻¹ and t = (2.303/0.03465) log 8 = 60 min.)

41.

Distinguish between homogeneous and heterogeneous catalysis. Describe three important industrial processes that use heterogeneous catalysis.

Answer

In homogeneous catalysis the catalyst is in the same phase as the reactants (H⁺ in esterification, all in solution); in heterogeneous catalysis it is in a different phase, usually a solid whose surface adsorbs gaseous or liquid reactants.

  • a.The Haber process: N₂ + 3H₂ ⇌ 2NH₃, on iron (with promoters), at about 450 °C and 200 atm, for ammonia, which becomes urea and other fertilizers.
  • b.The contact process: 2SO₂ + O₂ ⇌ 2SO₃, on vanadium(V) oxide, V₂O₅, at about 450 °C, for sulphuric acid.
  • c.The Ostwald process: 4NH₃ + 5O₂ → 4NO + 6H₂O, on a gauze of platinum–rhodium, for nitric acid.

(Also: the hydrogenation of vegetable oils on nickel to make vanaspati ghee, and cracking on zeolites.)

42.

When the concentration of A in the reaction A → B was changed from 1.20 M to 0.60 M, the half-life rose from 2.0 min to 4.0 min at 25 °C. Find the order of the reaction and the rate constant.

Hint

Halving [A]₀ doubled the half-life: which order has t½ ∝ 1/[A]₀?

Answer

The half-life is inversely proportional to the starting concentration (half the concentration, twice the half-life), so the reaction is second order: t½ = 1/(k[A]₀).
k=1t1/2[A]0=12.0×1.20=0.417 L mol−1 min−1 k = \frac{1}{t_{1/2}[\ce{A}]_0} = \frac{1}{2.0 \times 1.20} = 0.417 \text{ L mol}^{-1}\,\text{min}^{-1}
(Check: 1/(4.0 × 0.60) = 0.417.) k = 0.42 L mol⁻¹ min⁻¹.

43.

The reaction NH₄⁺(aq) + NO₂⁻(aq) → N₂(g) + 2H₂O(l) was studied:

Experiment Initial [NH₄⁺] (M) Initial [NO₂⁻] (M) Initial rate (M/s)
1 0.0100 0.200 5.4 × 10⁻⁷
2 0.0200 0.200 10.8 × 10⁻⁷
3 0.0400 0.200 21.5 × 10⁻⁷
4 0.200 0.0202 10.8 × 10⁻⁷
5 0.200 0.0404 21.6 × 10⁻⁷
6 0.200 0.0808 43.3 × 10⁻⁷
  • a.Compare the initial [NH₄⁺] and the initial rate in experiments 1 and 2. How are concentration and rate related?
  • b.Find the order with respect to each reactant and the rate constant.
Answer
  • a.[NH₄⁺] doubles (0.0100 → 0.0200) and the rate doubles (5.4 → 10.8 × 10⁻⁷ M/s): the rate is directly proportional to [NH₄⁺].
  • b.Experiments 1–3: doubling [NH₄⁺] doubles the rate, first order in NH₄⁺. Experiments 4–6: doubling [NO₂⁻] doubles the rate, first order in NO₂⁻. Rate = k[NH₄⁺][NO₂⁻], second order overall. From experiment 1:

k=5.4×10−70.0100×0.200=2.7×10−4 L mol−1 s−1 k = \frac{5.4 \times 10^{-7}}{0.0100 \times 0.200} = 2.7 \times 10^{-4} \text{ L mol}^{-1}\,\text{s}^{-1}

44.

Hydrogen reacts with nitrogen monoxide to form dinitrogen monoxide (laughing gas):
HX2(g)+2 NO(g)→NX2O(g)+HX2O(g) \ce{H2(g) + 2NO(g) -> N2O(g) + H2O(g)}
Find the rate law, the rate constant and the order with respect to each reactant from these data:

[NO] (M) 0.30 0.60 0.60
[H₂] (M) 0.35 0.35 0.70
Rate (mol L⁻¹ s⁻¹) 2.835 × 10⁻³ 1.134 × 10⁻² 2.268 × 10⁻²

The textbook gives the first two rates as 835 × 10⁻³ and 134 × 10⁻², which can’t be right with the third: 0.835 mol L⁻¹ s⁻¹ would be faster than 0.0227 at higher concentrations. So the book’s numbers don’t work; the rates here are the ones that fit the third, 2.268 × 10⁻².

Hint

Runs 1 and 2 change only [NO]; runs 2 and 3 only [H₂].

Answer

Runs 1 and 2: [NO] doubles and the rate becomes 1.134 × 10⁻²/2.835 × 10⁻³ = 4 times as great: second order in NO. Runs 2 and 3: [H₂] doubles and the rate doubles: first order in H₂.
Rate = k[NO]²[H₂], third order overall. From run 3:
k=2.268×10−2(0.60)2(0.70)=0.090 L2 mol−2 s−1 k = \frac{2.268 \times 10^{-2}}{(0.60)^2(0.70)} = 0.090 \text{ L}^2\,\text{mol}^{-2}\,\text{s}^{-1}

45.

How much, and in which direction, will each change affect the rate of CO(g) + NO₂(g) → CO₂(g) + NO(g), if its rate law is rate = k[NO₂]²?

  • a.Lowering the pressure of NO₂ from 0.50 atm to 0.250 atm.
  • b.Raising the concentration of CO from 0.01 M to 0.03 M.
Answer
  • a.[NO₂] is halved, so the rate becomes (½)² = ¼ as great: it falls to a quarter.
  • b.No change: CO doesn’t appear in the rate law (zero order in CO).
46.

Use the data for H₂O₂ + 2I⁻ + 2H⁺ → I₂ + 2H₂O:

Experiment [H₂O₂] (mol dm⁻³) [I⁻] (mol dm⁻³) [H⁺] (mol dm⁻³) Initial rate (mol dm⁻³ s⁻¹)
1 0.0200 0.0100 0.0100 3.50 × 10⁻⁶
2 0.0300 0.0100 0.0100 5.30 × 10⁻⁶
3 0.0050 0.0200 0.0200 1.75 × 10⁻⁶
4 0.0200 0.0100 0.0200 3.50 × 10⁻⁶

The textbook gives only experiments 1–3. In experiment 3, [I⁻] and [H⁺] both change at once, so those three can show only that the orders in I⁻ and H⁺ add up to 1, not what each is. So the book’s numbers don’t work; experiment 4, which changes [H⁺] alone, has been added.

  • a.Find the order with respect to each reactant.
  • b.Write the rate law.
  • c.Calculate the value of k.
Hint

Use experiments 1 and 4 for H⁺ first; then experiment 3 for I⁻.

Answer
  • a.Experiments 1 and 2: [H₂O₂] × 1.5, rate × 5.30/3.50 = 1.51: first order in H₂O₂. Experiments 1 and 4: [H⁺] doubles and the rate doesn’t change: zero order in H⁺. Experiment 3 against 1: [H₂O₂] × ¼ and [I⁻] × 2 (and [H⁺] × 2, no effect); the rate is × ½. So ¼ × 2ʸ = ½, 2ʸ = 2: first order in I⁻.
  • b.Rate = k[H₂O₂][I⁻] (second order overall; H⁺ is needed by the equation but reacts in a fast step).
  • c.From experiment 1:

k=3.50×10−60.0200×0.0100=1.75×10−2 dm3 mol−1 s−1 k = \frac{3.50 \times 10^{-6}}{0.0200 \times 0.0100} = 1.75 \times 10^{-2} \text{ dm}^3\,\text{mol}^{-1}\,\text{s}^{-1}

47.

Figure 3.29 shows the Maxwell–Boltzmann distribution at two temperatures, used to explain how temperature affects the rate of reaction.

  • a.Name the quantities on the x- and y-axes.
  • b.Does the activation energy change at the higher temperature?
  • c.Use the graph to explain the effect of a higher temperature on the rate.
Answer
  • a.x-axis: the kinetic energy of the molecules; y-axis: the number of molecules with that energy.
  • b.No: Eₐ is a property of the reaction (the height of its energy barrier); the line for Eₐ is in the same place at both temperatures. Only a catalyst changes it.
  • c.At T₂ the curve is flatter and spreads to higher energies, with the same total area. The **shaded area beyond Eₐ**, the molecules with enough energy to react, is much larger at T₂ (here about three times), so many more collisions are effective and the reaction is faster. The rate grows far more than the average energy does.

Long answer questions

48.

Nitrogen monoxide reacts with chlorine: 2NO(g) + Cl₂(g) → 2NOCl(g). These initial rates were measured:

[NO] (mol/L) [Cl₂] (mol/L) Rate (mol L⁻¹ h⁻¹)
0.50 0.50 1.14
1.00 0.50 4.56
1.00 1.00 9.12
  • a.What rate equation describes how the rate depends on [NO] and [Cl₂]?
  • b.What is the order with respect to each reactant?
  • c.What is the value of the rate constant?
  • d.Find the rate when each concentration is 2.0 mol/L.
Hint

Rows 1 and 2 change only [NO]; rows 2 and 3 only [Cl₂].

Answer
  • b.Rows 1 and 2: [NO] doubles and the rate becomes 4.56/1.14 = 4 times as great: second order in NO. Rows 2 and 3: [Cl₂] doubles and the rate doubles: first order in Cl₂.
  • a.Rate = k[NO]²[Cl₂], third order overall.
  • c.From row 1:

k=1.14(0.50)2(0.50)=9.12 L2 mol−2 h−1 k = \frac{1.14}{(0.50)^2(0.50)} = 9.12 \text{ L}^2\,\text{mol}^{-2}\,\text{h}^{-1}
d. Rate = 9.12 × (2.0)² × 2.0 = 73 mol L⁻¹ h⁻¹.

49.

Figure 3.30 shows how the concentration of a reactant changes with time.

  • a.Define half-life. Why is it important to know the half-life of a reaction or process?
  • b.Identify the order of the reaction from the plot, and give a reason.
  • c.Calculate the average rate as the concentration falls from 0.15 mol/L to 0.05 mol/L.
  • d.Assuming the reaction is first order, find its rate constant.
  • e.When will the reaction be complete?
Hint

Read the times at which the concentration is 0.10, 0.05 and 0.025 mol/L. For c, read the time at 0.15 mol/L too.

Answer
  • a.The half-life is the time for the concentration of a reactant to fall to half its starting value. It tells at a glance how fast a reaction or process is and how long anything will take: how long a medicine stays in the blood (and so how often to take it), how long a radioactive waste stays dangerous, the shelf life of a product, or the age of an object by radiocarbon dating.
  • b.First order: the concentration halves in equal times: 0.20 → 0.10 mol/L in 7 s, 0.10 → 0.05 in the next 7 s, 0.05 → 0.025 in the next 7 s. A constant half-life, independent of the concentration, is the mark of a first-order reaction.
  • c.From the graph, [A] = 0.15 mol/L at about 2.9 s and 0.05 mol/L at 14 s:

average rate=−0.05−0.1514−2.9=0.1011.1=9.0×10−3 mol L−1 s−1 \text{average rate} = -\frac{0.05 - 0.15}{14 - 2.9} = \frac{0.10}{11.1} = 9.0 \times 10^{-3} \text{ mol L}^{-1}\,\text{s}^{-1}

  • d.k=0.693t1/2=0.6937.0= k = \dfrac{0.693}{t_{1/2}} = \dfrac{0.693}{7.0} = 0.099 s⁻¹.
  • e.In theory, never: a first-order reaction halves its reactant again in every half-life, so some is always left. In practice it is complete enough after about ten half-lives (less than 0.1% left): t=2.3030.099log⁡1000≈ t = \dfrac{2.303}{0.099}\log 1000 \approx 70 s. (99% has gone after about 46 s.)
50.

The Haber process for ammonia, N₂(g) + 3H₂(g) ⇌ 2NH₃(g), ΔH = −92 kJ/mol, is carried out with an iron catalyst.

  • a.Define a catalyst. How does a catalyst change the rate of a reaction?
  • b.What type of catalysis is this? Define it.
  • c.Give the reason why a low temperature and a high pressure would increase the yield of ammonia.
  • d.Does the catalyst change the position of equilibrium? Why?
Answer
  • a.A catalyst is a substance that increases the rate of a reaction without being used up. It provides another path with a lower activation energy, so more collisions have enough energy to react.
  • b.Heterogeneous catalysis: the catalyst (solid iron) is in a different phase from the reactants (gases). N₂ and H₂ are adsorbed on the iron surface, where their bonds are weakened and broken; the atoms combine into NH₃, which leaves the surface.
  • c.The forward reaction is exothermic, so by Le Chatelier’s principle a lower temperature shifts the equilibrium towards ammonia. It also turns 4 mol of gas into 2, so a higher pressure shifts it towards the side with fewer gas molecules, ammonia. (In practice about 450 °C is used, not lower, because at low temperature the reaction is too slow even with the catalyst: a compromise between yield and rate. The pressure is about 200 atm.)
  • d.No. A catalyst lowers the activation energy of the forward and the backward reaction equally, so it speeds both up by the same factor. Equilibrium is reached sooner, but the equilibrium constant and the equilibrium mixture are the same.
51.

The initial rate of A + B → C was measured for several starting concentrations:

Experiment [A] (M) [B] (M) Initial rate (M/s)
1 0.100 0.100 4.0 × 10⁻⁵
2 0.100 0.200 4.0 × 10⁻⁵
3 0.200 0.100 16.0 × 10⁻⁵

Find:

  • a.the rate law
  • b.the rate constant
  • c.the rate when [A] = 0.5 M and [B] = 0.05 M
Answer
  • a.Experiments 1 and 2: doubling [B] leaves the rate unchanged, zero order in B. Experiments 1 and 3: doubling [A] makes the rate four times as great, second order in A. Rate = k[A]².
  • b.k=4.0×10−5(0.100)2=4.0×10−3 M−1 s−1 k = \dfrac{4.0 \times 10^{-5}}{(0.100)^2} = 4.0 \times 10^{-3} \text{ M}^{-1}\,\text{s}^{-1} (L mol⁻¹ s⁻¹).
  • c.Rate = 4.0 × 10⁻³ × (0.5)² = 1.0 × 10⁻³ M/s (the value of [B] doesn’t matter).
52.

A reaction, X + Y → XY, is zero order in X and second order in Y.

  • a.Write its rate law.
  • b.What is its overall order?
  • c.If the rate constant is 2.0 × 10⁻² L mol⁻¹ s⁻¹, find the initial rate of disappearance of X when [X] = 0.30 M and [Y] = 0.40 M.
Answer
  • a.Rate = k[X]⁰[Y]² = k[Y]².
  • b.0 + 2 = 2.
  • c.Rate = 2.0 × 10⁻² × (0.40)² = 3.2 × 10⁻³ mol L⁻¹ s⁻¹. X and Y react one to one, so X disappears at this rate; [X] doesn’t enter the calculation.
53.

Figure 3.31 shows the energy profiles of two reactions.

  • a.What is an energy profile diagram?
  • b.Is each reaction endothermic or exothermic? Why?
  • c.What is the activation energy in each?
  • d.Which reaction goes faster, and why?
  • e.Which reaction gives the more stable product, and why?
Answer
  • a.An energy profile diagram shows how the potential energy of the reacting particles changes as the reaction goes from reactants, over the energy barrier (the activated complex at the top), to products. It shows the activation energy and the enthalpy change, ΔH.
  • b.Both are exothermic: the products are lower in energy than the reactants (ΔH = −10 kJ/mol and −15 kJ/mol), so energy is given out.
  • c.Reaction 1: Eₐ = 15 kJ/mol; reaction 2: Eₐ = 25 kJ/mol.
  • d.Reaction 1 is faster: its activation energy is lower, so at the same temperature a larger fraction of collisions have enough energy to react.
  • e.Reaction 2: its products lie 15 kJ/mol below its reactants, lower than reaction 1’s (10 kJ/mol below). Lower energy means more stable. (Speed and stability don’t go together: the faster reaction gives the less stable product.)