Skip to content

← Grade 12 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

7 questions

Unit 5 · Electrochemistry

Printable PDFs

B. Exercise 5.2

1.

Given E∘(NaX+/Na)=−2.71 E^\circ(\ce{Na+}/\ce{Na}) = -2.71 V and E∘(AuX3+/Au)=+1.50 E^\circ(\ce{Au^3+}/\ce{Au}) = +1.50 V:

  • a.Which is the better reducing agent, Na or Au?
  • b.Can Au³⁺ oxidize Na to Na⁺? Write the reaction if it is feasible.
  • c.Why is gold found in nature in its elemental form?
Answer
  • a.Sodium. Its reduction potential is far lower, so it gives up electrons far more readily: it is one of the strongest reducing agents. Gold barely gives up electrons at all.
  • b.Yes. Au³⁺/Au has the higher reduction potential, so Au³⁺ is reduced and Na oxidized:

3 Na+AuX3+→3 NaX++Au \ce{3Na + Au^3+ -> 3Na+ + Au} (three sodium atoms to give the three electrons one gold ion takes)
Ecell∘=1.50−(−2.71)=+4.21 E^\circ_\text{cell} = 1.50 - (-2.71) = +4.21 V, strongly positive, so it is feasible. (In practice sodium would react with the water of any gold solution first; but against Au³⁺ alone the reaction goes.)
c. Gold’s reduction potential, +1.50 V, is one of the highest of all metals, higher even than that of the oxygen in moist air (+0.82 V in neutral water). So gold has almost no tendency to be oxidized: it doesn’t react with air, water or the acids of soil and rock, and stays as the metal for millions of years. That is why it is found as nuggets and grains in rock and river gravel, panned from Nepal’s rivers too, and why it never tarnishes.

2.

The electrochemical series has many applications. It can also help protect a metal from corrosion.

  • a.Why does iron corrode faster in salt water? Use the electrochemical series to explain.
  • b.Suggest why aluminium is used as a sacrificial anode for iron ships, with E∘(AlX3+/Al)<E∘(FeX2+/Fe) E^\circ(\ce{Al^3+}/\ce{Al}) < E^\circ(\ce{Fe^2+}/\ce{Fe}) .
  • c.Write the oxidation half-reaction for aluminium acting as a sacrificial anode.
Answer
  • a.Iron (−0.45 V) is well above oxygen in the series (OX2+2 HX2O+4 eX−→4 OHX− \ce{O2 + 2H2O + 4e- -> 4OH-} , +0.40 V in 1 M alkali and +0.82 V in neutral water), so on a wet surface iron and oxygen make a galvanic cell: iron is oxidized at anode areas, Fe→FeX2++2 eX− \ce{Fe -> Fe^2+ + 2e-} , and oxygen reduced at cathode areas; the Fe²⁺ and OH⁻ go on to form rust. The water is the cell’s electrolyte. Salt water, full of Na⁺ and Cl⁻ ions, conducts far better than pure water, so these little cells pass much more current and the iron dissolves faster. Chloride ions also break up the thin protective layer of oxide on the iron.
  • b.Because its reduction potential (−1.66 V) is lower than iron’s (−0.45 V): joined to the iron, aluminium is the more easily oxidized metal, so it becomes the anode and corrodes, and the iron becomes the cathode and is protected. Aluminium is also light, cheap, and gives more charge per kilogram than zinc. (Pure aluminium quickly covers itself in a layer of oxide that would stop it working, so ships’ anodes are aluminium alloys with a little zinc and indium, which keep the surface active.)
  • c.Al(s)→AlX3+(aq)+3 eX− \ce{Al(s) -> Al^3+(aq) + 3e-}
3.

A galvanic cell is made from these half-cells:
NiX2++2 eX−→Ni \ce{Ni^2+ + 2e- -> Ni} , E° = −0.26 V
CrX3++3 eX−→Cr \ce{Cr^3+ + 3e- -> Cr} , E° = −0.74 V

  • a.Identify the anode and the cathode. Write the cell notation.
  • b.Write the cell reaction, showing the electrode reactions.
  • c.Calculate the standard e.m.f. of the cell.
  • d.What happens to the cell potential if the concentration of Ni²⁺ is raised to 2 M while Cr³⁺ stays at 1 M?
Answer

a. Ni²⁺/Ni has the higher reduction potential, so nickel is the cathode and chromium the anode.
Cr(s)∣CrX3+(aq,1M)∥NiX2+(aq,1M)∣Ni(s) \ce{Cr(s)} \mid \ce{Cr^3+(aq, 1 M)} \parallel \ce{Ni^2+(aq, 1 M)} \mid \ce{Ni(s)}
b. Anode: Cr(s)→CrX3+(aq)+3 eX− \ce{Cr(s) -> Cr^3+(aq) + 3e-} (× 2)
Cathode: NiX2+(aq)+2 eX−→Ni(s) \ce{Ni^2+(aq) + 2e- -> Ni(s)} (× 3)
Six electrons are given and taken, so: 2 Cr(s)+3 NiX2+(aq)→2 CrX3+(aq)+3 Ni(s) \ce{2Cr(s) + 3Ni^2+(aq) -> 2Cr^3+(aq) + 3Ni(s)}

  • c.Ecell∘=Ecathode∘−Eanode∘=−0.26−(−0.74)=+0.48 E^\circ_\text{cell} = E^\circ_\text{cathode} - E^\circ_\text{anode} = -0.26 - (-0.74) = +0.48 V
  • d.The cell potential rises a little. Ni²⁺ is a reactant, so more of it pushes the reaction harder. By the Nernst equation, with n = 6 and Q=[CrX3+]2/[NiX2+]3=12/23=1/8 Q = [\ce{Cr^3+}]^2/[\ce{Ni^2+}]^3 = 1^2/2^3 = 1/8 :

E=0.48−0.05926log⁡18=0.48+0.0099×0.903=0.48+0.009=0.489 V E = 0.48 - \frac{0.0592}{6}\log\frac{1}{8} = 0.48 + 0.0099 \times 0.903 = 0.48 + 0.009 = 0.489 \text{ V}
so about 0.49 V, a rise of only 0.009 V.

4.

A galvanic cell of zinc and iron is built on this reaction:
Zn(s)+FeX2+(aq)→ZnX2+(aq)+Fe(s) \ce{Zn(s) + Fe^2+(aq) -> Zn^2+(aq) + Fe(s)}

  • a.Turn the reaction into cell notation.
  • b.Calculate ΔG° using the standard cell potential, E°cell = 0.32 V.
  • c.Is the reaction spontaneous under standard conditions? Justify.
  • d.What happens to the mass of the zinc electrode as the reaction proceeds?
Answer

a. Zinc is oxidized, so it is the anode, on the left:
Zn(s)∣ZnX2+(aq,1M)∥FeX2+(aq,1M)∣Fe(s) \ce{Zn(s)} \mid \ce{Zn^2+(aq, 1 M)} \parallel \ce{Fe^2+(aq, 1 M)} \mid \ce{Fe(s)}
b. Two electrons are transferred, n = 2:
ΔG∘=−nFEcell∘=−2×96,485×0.32=−61,750 J/mol≈−61.8 kJ/mol \Delta G^\circ = -nFE^\circ_\text{cell} = -2 \times 96{,}485 \times 0.32 = -61{,}750 \text{ J/mol} \approx -61.8 \text{ kJ/mol}
(The series gives −0.45−(−0.76)=0.31 -0.45 - (-0.76) = 0.31 V, the same to within rounding.)

  • c.Yes. E°cell is positive and ΔG° negative, so the reaction goes by itself.
  • d.It decreases: zinc atoms leave the electrode as Zn²⁺ ions, so the zinc rod loses 65.4 g for every mole that reacts, while iron is deposited on the iron electrode.
5.

These standard reduction potentials are given: E∘(MgX2+/Mg)=−2.37 E^\circ(\ce{Mg^2+}/\ce{Mg}) = -2.37 V and E∘(NiX2+/Ni)=−0.25 E^\circ(\ce{Ni^2+}/\ce{Ni}) = -0.25 V.

  • a.Design a galvanic cell using Mg and Ni. Label the anode, the cathode and the electron flow.
  • b.Write the cell notation and the cell reaction.
  • c.Calculate the cell potential.
  • d.Which acts as the oxidizing agent? Explain.
Answer
  • a.A magnesium strip in 1 M MgSO₄ in one beaker and a nickel rod in 1 M NiSO₄ in another, joined by a wire through a voltmeter and by a salt bridge of KNO₃. Magnesium, with the lower reduction potential, is the anode (−); nickel is the cathode (+); electrons flow through the wire from the magnesium to the nickel.
  • b.Mg(s)∣MgX2+(aq,1M)∥NiX2+(aq,1M)∣Ni(s) \ce{Mg(s)} \mid \ce{Mg^2+(aq, 1 M)} \parallel \ce{Ni^2+(aq, 1 M)} \mid \ce{Ni(s)}

Anode: Mg→MgX2++2 eX− \ce{Mg -> Mg^2+ + 2e-} ; cathode: NiX2++2 eX−→Ni \ce{Ni^2+ + 2e- -> Ni} ; cell reaction: Mg(s)+NiX2+(aq)→MgX2+(aq)+Ni(s) \ce{Mg(s) + Ni^2+(aq) -> Mg^2+(aq) + Ni(s)}

  • c.Ecell∘=−0.25−(−2.37)=+2.12 E^\circ_\text{cell} = -0.25 - (-2.37) = +2.12 V
  • d.The nickel(II) ion, Ni²⁺, is the oxidizing agent: it takes electrons from magnesium, oxidizing it, and is itself reduced to nickel metal. Neither metal is the oxidizing agent: magnesium metal is the reducing agent.
6.

While a galvanic cell was being built, no voltage was seen.

  • a.List three possible reasons.
  • b.How can the problem be overcome, so that the cell works properly?
  • c.Explain the role of the salt bridge in keeping the cell working.
Answer

a. Any three of:

  • there is no salt bridge, or it has dried out or doesn’t dip into both solutions, so the circuit is not complete inside the cell;
  • a loose or broken wire, a dirty (oxidized) electrode or a meter switched to the wrong range, so the circuit is not complete outside;
  • the two half-cells are the same electrode at the same concentration (two zinc half-cells, say), so there is no difference in potential;
  • the two solutions have mixed, so the reaction happens directly on one electrode and not through the wire.
  • b.Fill a salt bridge with fresh KCl or KNO₃ in agar (or soak a new filter paper) and make sure both ends dip into the solutions; clean the electrodes with sandpaper and tighten the connections; use two different metals, each in a solution of its own ions; keep the solutions apart.
  • c.The salt bridge completes the inner circuit by letting ions move between the half-cells while keeping the solutions from mixing. As the cell runs, its anions move into the anode’s beaker to balance the cations formed there and its cations into the cathode’s beaker to balance the cations removed, so both solutions stay neutral and the electrons keep flowing.
7.

Five metals P, Q, R, S and T behave like this: R displaces P and Q from solutions of their salts, while S does not react with a solution of any of the other metals. T displaces hydrogen from an acid, but not R. P displaces Q from its solution.

  • a.Arrange the metals in an activity series, with hydrogen.
  • b.The standard reduction potentials are PX2++2 eX−→P \ce{P^2+ + 2e- -> P} , E° = −0.44 V, and TX++eX−→T \ce{T+ + e- -> T} , E° = −0.34 V.
  • i.Construct a galvanic cell and show its anode and cathode.
  • ii.Calculate the e.m.f. of the cell with 1 M solutions.
  • iii.Predict whether the reaction PX2++2 T→P+2 TX+ \ce{P^2+ + 2T -> P + 2T+} will occur. Explain.

The textbook gives E°(T⁺/T) = +0.34 V. A metal with a positive reduction potential can’t displace hydrogen from an acid, so the book’s numbers don’t work with “T displaces hydrogen”; −0.34 V is used here. (With +0.34 V the answer to ii would be 0.78 V, and the reaction in iii still would not occur.)

Answer

a. R displaces P and Q, and P displaces Q: R > P > Q. T displaces hydrogen but not R: R > T > H. S displaces none of the others, so it is the least reactive of the five. With the potentials in b, P (−0.44 V) is above T (−0.34 V). So, most reactive first:
R > P > T > H, with Q below P and S below all the other metals.
The facts given don’t fix where Q stands against T and hydrogen, or S against hydrogen: that would need a test of Q with T’s salt or with acid, and of S with acid.

  • b.i. P has the lower reduction potential, so P is the anode and T the cathode: P(s)∣PX2+(aq,1M)∥TX+(aq,1M)∣T(s) \ce{P(s)} \mid \ce{P^2+(aq, 1 M)} \parallel \ce{T+(aq, 1 M)} \mid \ce{T(s)} , with the cell reaction P+2 TX+→PX2++2 T \ce{P + 2T+ -> P^2+ + 2T} .
  • ii.Ecell∘=−0.34−(−0.44)=+0.10 E^\circ_\text{cell} = -0.34 - (-0.44) = +0.10 V
  • iii.This is the cell reaction run backwards, so E∘=E∘(PX2+/P)−E∘(TX+/T)=−0.44−(−0.34)=−0.10 E^\circ = E^\circ(\ce{P^2+}/\ce{P}) - E^\circ(\ce{T+}/\ce{T}) = -0.44 - (-0.34) = -0.10 V, negative: the reaction is not spontaneous and does not occur. T is less reactive than P and can’t displace it.