Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
16 questions
Unit 6 · Transition Metals
Printable PDFs
- Study notes 3 pages
- Worksheet 4 pages Answer key
B. Short answer questions
Give reasons:
- a.Zinc is a non-typical transition element.
- b.Transition elements show variable oxidation states.
- c.Transition metals are good catalysts.
Answer
- a.Zinc’s atom is [Ar] 3d¹⁰ 4s² and its only ion, Zn²⁺, is [Ar] 3d¹⁰: the d subshell is full in both. So it lacks the properties that come from a partly filled d subshell: it shows only one oxidation state, +2; its compounds are white (no d–d transition); they are not paramagnetic (no unpaired electrons); and it is a soft, low-melting metal (419.5 °C) with no d electrons in its metallic bonding. It sits in the d block but behaves more like magnesium.
- b.Their (n − 1)d and ns electrons are close in energy, so after the s electrons go, one or more d electrons can follow for only a little more energy. A metal can therefore lose different numbers of electrons under different conditions, and several of the resulting states are stable in suitable compounds (6.3).
- c.Their variable oxidation states let them take electrons from one reactant and give them to another, through intermediates that give an easier path of lower activation energy; and their surfaces adsorb reactant molecules with their partly filled d orbitals, bringing them together and weakening their bonds (6.8).
Write the characteristics of transition metals.
Answer
- They are in the middle of the periodic table, groups 3 to 12.
- Their valence configuration is (n − 1)d¹⁻¹⁰ ns¹⁻², the d subshell partly filled.
- They show variable oxidation states.
- Most of their compounds are colored, because of d–d transitions.
- They are good conductors of heat and electricity.
- They have high densities, melting points and boiling points.
- Many of them and their compounds are catalysts.
- Many of their compounds are paramagnetic, having unpaired d electrons.
- They form complex ions readily.
- They form alloys.
- They are hard, malleable and ductile, with a metallic luster.
What do you mean by crystal field splitting?
Answer
Crystal field splitting is the separation of a metal ion’s five d orbitals, equal in energy in the free ion, into sets of different energy when ligands surround it. In an octahedral complex, the ligands along the axes repel the electrons of dx²−y² and dz² (which point at them) more than those of dxy, dyz and dzx (which point between them), so the d orbitals split into a higher pair, eg, and a lower three, t₂g, Δo apart.
What are transition elements? Why are they called so?
Answer
Transition elements are the d-block elements of groups 3 to 12, in which the last electron enters the (n − 1)d subshell; strictly, those whose atoms or common ions have an incomplete d subshell. They are called transition elements because they lie between the s block and the p block, and their properties form a transition between those of the reactive s-block metals and the p-block elements.
Define:
- a.ligands
- b.coordination sphere
- c.complex ion
Answer
- a.Ligands are the molecules or ions that give a lone pair of electrons to a central metal atom or ion to form coordinate bonds in a complex: H₂O, NH₃, Cl⁻, CN⁻, CO, en, EDTA.
- b.The coordination sphere is the central metal with the ligands bonded directly to it, written in square brackets: [Cu(NH₃)₄]²⁺ in [Cu(NH₃)₄]SO₄.
- c.A complex ion is a charged species made of a central metal atom or ion bonded to ligands by coordinate bonds, such as [Cu(NH₃)₄]²⁺ (a complex cation) or [Fe(CN)₆]³⁻ (a complex anion).
Which has more unpaired electrons, Fe²⁺ or Cr³⁺?
Answer
Fe²⁺ is [Ar] 3d⁶: five electrons go one into each d orbital, and the sixth pairs, leaving 4 unpaired. Cr³⁺ is [Ar] 3d³: three electrons, one in each of three orbitals, 3 unpaired. So Fe²⁺ has more, in the free ion and in a weak-field complex such as [Fe(H₂O)₆]²⁺. (In a strong field, as in [Fe(CN)₆]⁴⁻, Fe²⁺ pairs all six in t₂g and has none, while Cr³⁺ keeps its 3 in any octahedral field.)
What do you mean by degenerate orbitals?
Answer
Degenerate orbitals are orbitals of the same energy. The three p orbitals of a subshell are degenerate, and so are the five d orbitals of a free metal ion; in a complex, the ligands’ field splits the d orbitals so that only those within each set (the three t₂g, the two eg) stay degenerate.
What is crystal field splitting energy?
Answer
The crystal field splitting energy, Δo in an octahedral complex, is the energy difference between the two sets of split d orbitals, t₂g and eg. It depends on the ligands (the spectrochemical series), the metal and its oxidation state, and it is the energy of the light a d–d transition absorbs. (Don’t confuse it with the crystal field stabilization energy, CFSE, the total lowering of the electrons’ energy: −0.4 Δo for each t₂g electron, +0.6 Δo for each eg electron.)
Give any two examples of complex ions.
Answer
[Cu(NH₃)₄]²⁺, tetraamminecopper(II) ion, and [Fe(CN)₆]³⁻, hexacyanidoferrate(III) ion. (Others: [Ag(NH₃)₂]⁺, [Cu(H₂O)₆]²⁺, [Co(NH₃)₆]³⁺.)
Transition metal ions are paramagnetic. Why?
Answer
Most transition metal ions have unpaired electrons in their partly filled d orbitals. Each unpaired electron behaves like a tiny magnet, and these line up with an outside magnetic field, so the substance is pulled into it: it is paramagnetic. The more unpaired electrons, the stronger the pull: μ = √(n(n + 2)) BM. Ions with no unpaired electrons, d⁰ (Sc³⁺, Ti⁴⁺), d¹⁰ (Zn²⁺, Cu⁺), or low-spin d⁶ ([Fe(CN)₆]⁴⁻), are diamagnetic.
C. Long answer questions
What is CFT? Write its postulates.
Answer
Crystal field theory (CFT), worked out by Hans Bethe (1929) and John Van Vleck, explains the bonding, colors and magnetism of transition metal complexes by treating the ligands as point negative charges (or dipoles) whose electric field acts on the metal ion’s d electrons. Its postulates:
- The metal ion is surrounded by the electric field of the ligands.
- The metal–ligand bonding is purely electrostatic.
- The metal is a positive ion whose charge equals its oxidation state.
- Without ligands, the five d orbitals are degenerate.
- In the ligands’ field the degeneracy is lost: in an octahedral complex the d orbitals split into a lower set t₂g (dxy, dyz, dzx) and a higher set eg (dx²−y², dz²).
- The size of the splitting depends on the ligands and their arrangement.
- The splitting gives a crystal field stabilization energy, which affects the stability, color and magnetism of complexes.
- Weak-field ligands (small splitting) give high-spin complexes with many unpaired electrons.
- Strong-field ligands (large splitting) give low-spin complexes, the electrons paired in the lower orbitals.
Explain how CFT accounts for the splitting of d orbitals in octahedral complexes.
Answer
In an octahedral complex, six ligands approach the metal ion along the ±x, ±y and ±z axes. In the free ion, the five d orbitals have the same energy. As the ligands come near, all the d electrons are repelled by the ligands’ negative charge, but not equally:
- dx²−y² (lobes along x and y) and dz² (main lobes along z) point straight at the ligands, so their electrons are repelled most and these two orbitals rise in energy: the eg set.
- dxy, dyz, dzx have their lobes between the axes, so their electrons are repelled less and these three orbitals fall in energy: the t₂g set.
The gap between them is Δo. The average energy is unchanged, so eg lies 0.6 Δo above the average and t₂g 0.4 Δo below it. Electrons fill t₂g first; for d⁴–d⁷ they then either go up into eg (weak field, Δo < pairing energy: high spin) or pair in t₂g (strong field, Δo > pairing energy: low spin). Cr³⁺ (d³), for example, puts one electron in each t₂g orbital, CFSE = −1.2 Δo (Figure 6.17).
What are transition metals? Write their general characteristics.
Answer
Transition metals are the d-block elements, groups 3 to 12 of the periodic table, in which the last electron enters the (n − 1)d subshell, with a partly filled d subshell in the atom or a common ion. Their general characteristics, with the reason for each:
- Electronic configuration (n − 1)d¹⁻¹⁰ ns¹⁻².
- Variable oxidation states, because the ns and (n − 1)d electrons are close in energy (Mn +2 to +7).
- Colored compounds, from d–d transitions in split d orbitals (Cu²⁺ blue).
- Paramagnetism, from unpaired d electrons.
- Complex formation, because their ions are small, highly charged and have empty d orbitals for ligands’ lone pairs.
- Catalytic activity, from variable oxidation states and surface adsorption (Fe in the Haber process).
- Alloy formation, because their atoms are of similar size (brass, bronze, steel).
- High densities, melting and boiling points, from strong metallic bonding by both s and d electrons.
- Good conductors of heat and electricity; hard, malleable, ductile and lustrous.
Explain why transition metals and their compounds show catalytic properties.
Answer
- Variable oxidation states. A transition metal can change its oxidation state during a reaction, taking electrons from one substance and giving them to another. It forms unstable intermediates with the reactants, giving a new path with a lower activation energy, and is set free unchanged at the end. Fe³⁺/Fe²⁺ catalyzes the reaction of iodide with peroxodisulphate; V₂O₅ in the contact process passes oxygen to SO₂ as vanadium goes from +5 to +4 and back.
- Surface adsorption. Transition metals and their compounds have surfaces that adsorb reactant molecules, using their partly filled d orbitals to form weak bonds with them. This holds the reactants close together, in the right positions, and weakens their bonds, so they react more easily: nickel in hydrogenation, iron in the Haber process. Finely divided catalysts work best because they have the most surface.
- Complex formation. Many can bond to reactant molecules as ligands, holding them in the right arrangement to react, as in the Ziegler–Natta catalyst and in metal-containing enzymes.
Why do most transition metals form colored compounds? What factors affect the color of transition metal compounds?
Answer
Most transition metal ions have partly filled d orbitals. Ligands round the ion split these orbitals into sets of different energy (t₂g and eg in an octahedral complex). The gap, Δo, usually matches the energy of visible light, so the ion absorbs light of one part of the spectrum as an electron jumps from the lower to the higher set (a d–d transition), and we see the complementary color of the light absorbed: hydrated Cu²⁺ absorbs red-orange and looks blue.
Factors that affect the color:
- The metal and its number of d electrons: d⁰ and d¹⁰ ions (Sc³⁺, Zn²⁺) are colorless.
- The oxidation state: Fe²⁺ is pale green, Fe³⁺ yellow-brown.
- The ligands: stronger-field ligands give a larger Δo and absorb shorter wavelengths, so pale blue [Cu(H₂O)₆]²⁺ becomes deep blue [Cu(NH₃)₄]²⁺.
- The shape of the complex: tetrahedral [CoCl₄]²⁻ is blue, octahedral [Co(H₂O)₆]²⁺ pink.
- Charge transfer, which gives intense colors even without d electrons: purple MnO₄⁻, orange Cr₂O₇²⁻.
Draw the shapes of complex ions having coordination numbers 4 and 6.
Answer
With coordination number 4: tetrahedral, the metal at the center of a tetrahedron and the four ligands at its corners, 109.5° apart, as in [CoCl₄]²⁻ or [Zn(NH₃)₄]²⁺; or square planar, the metal and four ligands in one plane, the ligands at the corners of a square, 90° apart, as in [Ni(CN)₄]²⁻ or [Cu(NH₃)₄]²⁺.
With coordination number 6: octahedral, six ligands along ±x, ±y and ±z, at the corners of an octahedron, 90° apart, as in [Co(NH₃)₆]³⁺ or [Fe(CN)₆]³⁻. All three are drawn in Figure 6.14 (with the linear shape of coordination number 2).
