Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
28 questions
Unit 4 · Chemical Thermodynamics
Printable PDFs
- Study notes 3 pages
- Worksheet 4 pages Answer key
B. Short answer questions
Define the following, with their units:
- a.internal energy
- b.enthalpy
- c.entropy
- d.Gibbs free energy
Answer
- a.Internal energy (E or U) is the total energy stored in a system: the kinetic energy of its particles’ motion (translation, rotation, vibration) and their potential energy (intermolecular forces, chemical bonds, electrons and nuclei). Unit: joule, J (kJ/mol per mole).
- b.Enthalpy (H) is the heat content of a system, its internal energy plus the product of its pressure and volume, ; its change equals the heat absorbed at constant pressure. Unit: J (kJ/mol).
- c.Entropy (S) is a measure of the disorder or randomness of a system, of how spread out its energy is; its change in a reversible process is . Unit: J/K (J/(mol K) per mole).
- d.Gibbs free energy (G) is the energy of a system available to do useful work at constant temperature and pressure, . Unit: J (kJ/mol).
Differentiate between:
- a.exothermic and endothermic processes
- b.extensive and intensive properties
- c.enthalpy of formation and enthalpy of combustion
- d.state function and path function
- e.isobaric and isochoric processes
Answer
a. Exothermic and endothermic processes:
| Exothermic | Endothermic |
|---|---|
| releases heat to the surroundings | absorbs heat from the surroundings |
| ΔH negative | ΔH positive |
| products have less enthalpy than reactants | products have more enthalpy than reactants |
| e.g. burning of methane, neutralization | e.g. melting of ice, decomposition of CaCO₃ |
b. Extensive and intensive properties:
| Extensive | Intensive |
|---|---|
| depends on the amount of matter | doesn’t depend on the amount |
| halved when the system is halved | the same in each half |
| mass, volume, E, H, S, G | temperature, pressure, density, boiling point |
c. Enthalpy of formation and enthalpy of combustion:
| Enthalpy of formation | Enthalpy of combustion |
|---|---|
| ΔH when 1 mol of a compound is formed from its elements in their standard states | ΔH when 1 mol of a substance burns completely in oxygen |
| can be negative or positive (CO₂ −393.5, C₂H₂ +227.4 kJ/mol) | always negative |
| zero for an element in its standard state | not zero for elements that burn (carbon −393.5 kJ/mol) |
d. State function and path function:
| State function | Path function |
|---|---|
| depends only on the initial and final states | depends on the path taken |
| has a definite value in each state; its change is written ΔX | has no value in a state; only the amount in a process |
| P, V, T, E, H, S, G | heat (q), work (w) |
e. Isobaric and isochoric processes:
| Isobaric | Isochoric |
|---|---|
| pressure constant, ΔP = 0 | volume constant, ΔV = 0 |
| work of expansion done, | no work of expansion, w = 0 |
| heat absorbed = ΔH | heat absorbed = ΔE |
| e.g. a reaction in an open beaker, boiling water in an open pot | e.g. heating a gas in a sealed rigid vessel, a bomb calorimeter |
State the following laws, with their mathematical form and an explanation:
- a.the first law of thermodynamics
- b.the second law of thermodynamics
- c.the Lavoisier–Laplace law
- d.Hess’s law of constant heat summation
Answer
- a.First law: energy can be neither created nor destroyed, only changed from one form to another. For a closed system, : the change in internal energy equals the heat absorbed by the system plus the work done on it. Example: a gas that absorbs 600 J and does 200 J of work gains 400 J of internal energy.
- b.Second law: in every spontaneous process the entropy of the universe increases: (= 0 for a reversible process). Example: heat flows from hot to cold because the cold body gains more entropy (q/T at its lower T) than the hot one loses. At constant T and P it becomes ΔG < 0.
- c.Lavoisier–Laplace law: the heat needed to decompose a compound into its elements equals in size, and is opposite in sign to, the heat released when the compound is formed from its elements: . Example: , −285.8 kJ; , +285.8 kJ.
- d.Hess’s law: the total enthalpy change of a reaction is the same whether it happens in one step or in several, provided the initial and final states are the same: . Example: C → CO (−110.5 kJ), CO → CO₂ (−283.0 kJ); the sum, −393.5 kJ, equals C → CO₂ directly. It holds because enthalpy is a state function.
Define a state function. Explain why enthalpy and entropy are state functions.
Answer
A state function is a property whose value depends only on the present state of the system (its pressure, temperature, composition), and whose change depends only on the initial and final states, not on the path between them.
Enthalpy is defined as . The internal energy E, the pressure P and the volume V each have a definite value in a given state, so H, made from them, does too: ΔH between two states is the same by any path, which is why Hess’s law works.
Entropy measures the disorder of a system, the number of ways its particles and energy can be arranged in a given state. That number is fixed by the state itself (its temperature, volume, amount and phase), not by how the system got there, so S is a state function, and ΔS = S₂ − S₁ depends only on the two states. (The heat q is a path function, but the ratio taken along a reversible path is the same for every reversible path.)
What is internal energy? Write the relation between internal energy and enthalpy. Use it to show that the change in internal energy and the change in enthalpy are equal for the formation of HCl from H₂ and Cl₂.
Answer
Internal energy is the total energy stored within a system, from the motion of its particles and the forces between and within them.
Relation: , so at constant pressure , and for ideal gases at constant temperature
where = moles of gaseous products − moles of gaseous reactants.
For HCl: . Moles of gas: products 2, reactants 1 + 1 = 2, so . Then and
The volume of gas doesn’t change, so no work of expansion is done, and the heat at constant pressure equals the heat at constant volume (−184.6 kJ for the equation).
The enthalpy change of the reaction between nitrogen and oxygen is
- a.What is meant by the enthalpy of reaction?
- b.What is the meaning of ΔH = +180 kJ?
- c.Find the enthalpy change of .
- d.Calculate the enthalpy of formation of NO.
Answer
- a.The enthalpy of reaction is the heat absorbed or released, at constant pressure, when the amounts of reactants shown in the balanced equation react completely.
- b.When 1 mol of nitrogen reacts with 1 mol of oxygen to give 2 mol of nitrogen monoxide, 180 kJ of heat is absorbed: the reaction is endothermic, and the products have 180 kJ more enthalpy than the reactants.
- c.Reversing a reaction changes the sign of ΔH (Lavoisier–Laplace): .
- d.The enthalpy of formation is for 1 mol of NO from its elements, so halve the equation:
(Tables: +90.3 kJ/mol.)
State the Lavoisier–Laplace law and give its applications.
Answer
Lavoisier–Laplace law: the heat required to decompose a compound into its elements is equal in magnitude but opposite in sign to the heat evolved when the compound is formed from its elements. More generally, the enthalpy change of a reaction reversed is equal and opposite to that of the forward reaction.
Example: , ΔH = −296.8 kJ; , ΔH = +296.8 kJ.
Applications:
- It gives the heat of decomposition of a compound, often hard to measure, from its heat of formation.
- It lets us write ΔH for any reaction reversed, as is done at every step of a Hess’s law calculation.
- It shows that a compound formed exothermically needs at least that much energy to be decomposed: compounds with large negative ΔH°f (water, CO₂, Al₂O₃) are hard to decompose, which is why aluminium is extracted by electrolysis.
- It is a check on the first law: forming and decomposing a compound returns everything to the start, with no energy gained or lost.
Figure 4.27 shows six changes of state.
- a.Which changes are endothermic and which exothermic?
- b.Which changes increase the entropy of the system?
- c.Using ΔH and ΔS, say which changes are spontaneous at low temperature, with an explanation.
Answer
- a.Endothermic (ΔH > 0, heat taken in to free the particles): evaporation, melting, sublimation. Exothermic (ΔH < 0): condensation, freezing, deposition.
- b.Evaporation, melting and sublimation increase entropy (ΔS > 0): the particles become freer and more disordered.
- c.Condensation, freezing and deposition have ΔH < 0 and ΔS < 0. In , the term −TΔS is positive and grows with temperature. At low temperature it is small, the negative ΔH wins, and ΔG < 0: these three are spontaneous at low temperature (below the melting or boiling point). At high temperature −TΔS wins, and their reverses (melting, evaporation, sublimation) become the spontaneous ones.
Using the data, calculate ΔH for .
Hint
These are all formation equations. Use ΔH = ΣΔH°f(products) − ΣΔH°f(reactants), or reverse the first and add.
Answer
By the cycle: reverse the first (+335) to break butanol into its elements, then form butene (−17) and water vapor (−242) from them: 335 − 17 − 242 = +76 kJ/mol. The dehydration of butanol is endothermic.
Calculate the enthalpy change of the reaction
from the data:
Hint
Keep the first; reverse the second; double the third and the fourth.
Answer
Adding, the 2 H₂, the O₂ and the 2 H₂O(g) cancel, leaving the required equation:
This is the reaction a bombardier beetle uses: it mixes hydroquinone and hydrogen peroxide in a chamber of its abdomen, and the heat boils the spray it fires at attackers.
From the data, calculate the enthalpy change, in kJ/mol, of .
Hint
Reverse the first equation, keep the second, and take the third three times.
Answer
Adding, KCl, 3MgO and 3Mg cancel:
This is the enthalpy of formation of potassium chlorate (tables: −397.7 kJ/mol).
Figure 4.28 shows an enthalpy cycle for barium chloride.
- a.How does it illustrate Hess’s law?
- b.What is the enthalpy of solution of barium chloride?
- c.Calculate the enthalpy of hydration of BaCl₂(s) from the cycle.
Answer
- a.Anhydrous BaCl₂(s) can go to its solution BaCl₂(aq) directly (ΔH = −20.6 kJ), or in two steps: first taking up 2 H₂O to form the hydrate BaCl₂·2H₂O(s) (ΔH₁), then dissolving the hydrate (ΔH₂ = +8.8 kJ). By Hess’s law the start and the end are the same, so the total is the same by both routes: .
- b.The enthalpy of solution of anhydrous barium chloride is the direct step, −20.6 kJ/mol (and that of the hydrate, +8.8 kJ/mol).
- c.
The enthalpy of hydration, , is −29.4 kJ/mol. It can’t be measured directly (the salt would dissolve as well as hydrate), which is why the cycle is used.
Figure 4.29 shows the enthalpy of the reactants and products of a reaction.
- a.Is the reaction endothermic or exothermic? Why?
- b.Give two common examples of such reactions.
Answer
- a.Endothermic: the products lie higher than the reactants, so H(products) > H(reactants) and ΔH is positive; heat must be absorbed from the surroundings.
- b.Any two: photosynthesis; the thermal decomposition of limestone, ; dissolving ammonium nitrate in water (a cold pack); the reaction of nitrogen and oxygen to give NO; melting of ice; evaporation of water.
The first law of thermodynamics relates internal energy, heat and work.
- a.Write the relation and explain its meaning.
- b.How does it change for an isothermal process and for an adiabatic process?
- c.In what ways can the internal energy of a closed system be increased?
- d.Under what conditions are q and w negative?
Answer
- a.: the change in a system’s internal energy equals the heat absorbed by it plus the work done on it. Energy is neither created nor destroyed, only passed in or out as heat and work.
- b.Isothermal (ideal gas): the temperature, and so the internal energy, doesn’t change, ΔE = 0, so : the heat absorbed equals the work done by the gas. Adiabatic: no heat crosses, q = 0, so : work done on the gas raises its internal energy (it heats), work done by it lowers it (it cools).
- c.A closed system can’t gain matter, so only by (i) supplying heat to it (q > 0), or (ii) doing work on it, by compressing it or stirring it (w > 0), or both.
- d.q is negative when the system releases heat to its surroundings (an exothermic reaction, a hot gas cooling). w is negative when the system does work on its surroundings (a gas expanding against outside pressure).
The enthalpies of combustion of two allotropes of carbon are:
- a.What are allotropes?
- b.Which allotrope is the more stable, and why?
- c.Calculate the enthalpy changes for converting graphite to diamond, and diamond to graphite.
Answer
- a.Allotropes are different forms of the same element in the same physical state, with different arrangements of their atoms: diamond (a 3D network of carbon atoms) and graphite (flat layers) are allotropes of carbon; O₂ and O₃ of oxygen.
- b.Graphite. Burning diamond gives out 1.9 kJ/mol more heat than burning graphite, to make the same CO₂. So diamond holds more enthalpy; graphite, lower in enthalpy, is the more stable.
- c.Subtract the second equation from the first (that is, add the first to the reverse of the second):
(Making diamond needs a pressure of about 50,000 atm as well, because diamond is denser; at ordinary pressure graphite is the stable form.)
Given:
- a.Which of reactions (2) and (3) takes place more easily, and why?
- b.Calculate the enthalpy change for .
Answer
- a.Reaction (2), ozone breaking down to oxygen. It releases heat (ΔH = −142.3 kJ) and makes more gas molecules (1 → 1½), so it is spontaneous: ozone slowly decomposes by itself. Reaction (3) needs 495 kJ to break the strong O=O bond, which happens only with high-energy ultraviolet light in the upper atmosphere.
- b.Keep (1), reverse (2), and take half of (3) reversed:
Adding: O₃ cancels, and the oxygen molecules cancel (1 + ½ on the right, 3/2 on the left):
Predict the sign of the entropy change for each process, with a reason:
- a.
- b.the freezing of liquid water
- c.
- d.
Answer
- a.ΔS > 0: an ordered crystal breaks up into ions free to move through the solution.
- b.ΔS < 0: freely moving water molecules are locked into the ordered crystal of ice.
- c.ΔS > 0: a solid (dry ice) becomes a gas, whose molecules spread through the whole space.
- d.ΔS > 0: a gas is formed from a solid (ΔS° = +160 J/(mol K)).
Using the data, calculate the temperature at which is at equilibrium (at 1 bar), above which it becomes spontaneous.
| Substance | ΔH°f (kJ/mol) | S° (J/(mol K)) |
|---|---|---|
| H₂O(l) | −285.83 | 70.0 |
| H₂O(g) | −241.82 | 188.8 |
Hint
Find ΔH° and ΔS° for the change, then set ΔG° = 0.
Answer
At equilibrium ΔG° = 0:
This is the boiling point at 1 bar estimated from data at 298 K. Water really boils at 373 K (100 °C) at 1 atm, and at 372.8 K (99.6 °C) at 1 bar. The estimate is about 3 K low because ΔH° and ΔS° are not quite constant: at 373 K both are smaller (40.7 kJ/mol and 109 J/(mol K)) than at 298 K, and their ratio there, 40 700 ÷ 109 = 373 K, gives the true boiling point. Above the boiling point ΔG° < 0 and water boils.
Use the bond enthalpies in the table to answer:
| Bond | C–C | C–H | O=O | O–H | C=O (in CO₂) | C–O | H–H | C=C |
|---|---|---|---|---|---|---|---|---|
| Bond enthalpy (kJ/mol) | 347 | 413 | 498 | 464 | 805 | 358 | 436 | 612 |
- a.Which bond is the hardest to break?
- b.What does a C–H bond enthalpy of 413 kJ/mol mean?
- c.Calculate the enthalpy of combustion of methane from the bond enthalpies.
Answer
- a.C=O in CO₂, with the largest bond enthalpy, 805 kJ/mol.
- b.413 kJ of energy is needed to break one mole of C–H bonds (6.02 × 10²³ of them) in gaseous molecules into separate gaseous atoms; it is an average over many compounds, and the same energy is released when a mole of C–H bonds forms.
- c.
Broken: 4 C–H + 2 O=O = 4(413) + 2(498) = 2648 kJ.
Formed: 2 C=O + 4 O–H = 2(805) + 4(464) = 3466 kJ.
(This gives water as vapor; measured, −802 kJ/mol, or −890 kJ/mol with liquid water.)
Figure 4.30 shows four thermodynamic processes on a P–V diagram. Define each, with an example.
Answer
Isobaric (the horizontal line): pressure constant, ΔP = 0. Example: water boiling in an open pot, or any reaction in an open beaker at the pressure of the air.
Isochoric (the vertical line): volume constant, ΔV = 0, so no work of expansion is done. Example: heating a gas in a sealed rigid cylinder, or burning a sample in a bomb calorimeter.
Isothermal (the gentler curve, = constant): temperature constant, ΔT = 0. Example: a gas expanding slowly in a cylinder that stands in a large water bath.
Adiabatic (the steeper curve): no heat exchanged, q = 0. Example: the rapid compression of air in a diesel engine’s cylinder, or air rushing out of a burst tyre (which feels cold).
The adiabatic curve is steeper than the isothermal one because, with no heat coming in, an expanding gas cools as well as spreading out, so its pressure falls faster.
C. Long answer questions
Answer using Figure 4.31.
- a.Define enthalpy.
- b.Write the balanced chemical equation for the reaction.
- c.What is the meaning of −890 kJ/mol?
- d.Calculate the calorific value of methane in kJ/g.
- e.How does this reaction increase the entropy of the universe?
Answer
- a.Enthalpy (H) is the heat content of a system: its internal energy plus pressure × volume, . Its change, ΔH, is the heat absorbed or released at constant pressure.
- b.
- c.When 1 mol of methane burns completely in oxygen to carbon dioxide and liquid water, 890 kJ of heat is released to the surroundings: −890 kJ/mol is the enthalpy of combustion of methane; the minus sign means exothermic.
- d.CH₄ = 12.01 + 4(1.008) = 16.04 g/mol.
e. The system’s own entropy actually falls: 3 mol of gas become 1 mol of gas and some liquid. From standard entropies, .
But 890 kJ of heat goes into the surroundings, raising their entropy by
So J/K, a large increase. The heat released spreads into the surroundings and disorders them far more than the system becomes ordered: that is why burning is spontaneous.
Define entropy and give its unit. Predict the sign of the entropy change of the system in each reaction:
- a.molten gold solidifies
- b.gaseous Cl₂ dissociates in the stratosphere into gaseous Cl atoms
- c.gaseous CO reacts with gaseous H₂ to form liquid methanol, CH₃OH
- d.the precipitation reaction between Ca(NO₃)₂(aq) and (NH₄)₃PO₄(aq)
Answer
Entropy (S) is a measure of the disorder or randomness of a system, of how spread out its matter and energy are. Unit: J/K (J/(mol K) for one mole); for a reversible change at constant T, .
- a.ΔS < 0: liquid gold becomes an ordered solid.
- b.ΔS > 0: , one gas molecule becomes two.
- c.ΔS < 0: , 3 mol of gas become a liquid.
- d.: ions free in the solution come together into a solid precipitate, so the expected answer is ΔS < 0.
Going further: for this reaction the measured entropy change is actually positive (about +840 J/K for the equation). Highly charged ions such as Ca²⁺ and PO₄³⁻ hold a tight, ordered shell of water molecules around them; when they come out as a solid, that water is set free, and its gain in disorder outweighs the ordering of the ions. The rule “precipitation lowers entropy” works for ions of small charge, like Ag⁺ and Cl⁻.
Enthalpies of combustion are given:
| Reaction | ΔH°c (kJ/mol) |
|---|---|
| −393.5 | |
| −285.8 | |
| −1559.7 |
- a.Define enthalpy of combustion.
- b.Calculate the calorific value of ethane.
- c.Using Hess’s law, calculate the enthalpy of formation of ethane.
Answer
- a.The enthalpy of combustion of a substance is the enthalpy change when one mole of it burns completely in oxygen (under standard conditions, for ΔH°c).
- b.C₂H₆ = 2(12.01) + 6(1.008) = 30.07 g/mol.
c. Target: . Take 2 × the first, 3 × the second, and the third reversed:
Adding (2 + 3/2 = 7/2 O₂ cancels, and so do CO₂ and H₂O):
For the combustion of graphite, , ΔH° = −393 kJ and ΔS° = +2.9 J/K.
- a.Define standard enthalpy change and standard entropy change.
- b.What is the enthalpy of formation of carbon dioxide from this process? Justify.
- c.Under what conditions is the process spontaneous?
- d.Calculate the temperature at which ΔG° = −394 kJ.
- e.Melting and freezing are reverse processes, yet both are spontaneous. Explain their spontaneity at different temperatures.
Answer
- a.The standard enthalpy change (ΔH°) is the heat absorbed or released at constant pressure when a reaction takes place with every substance in its standard state (pure, at 1 bar; 1 mol/L for solutes), usually at 298 K. The standard entropy change (ΔS°) is the change in entropy for the same reaction under the same standard conditions, .
- b.−393 kJ/mol. The reaction forms exactly 1 mol of CO₂ from its elements, carbon and oxygen, each in its standard state (graphite, O₂ gas). That is the definition of the standard enthalpy of formation, so ΔH°f(CO₂) = ΔH°(this reaction).
- c.ΔH° is negative and ΔS° positive, so is negative at every temperature: the process is spontaneous at all temperatures (once lit: the activation energy is why paper or charcoal doesn’t catch fire by itself).
- d.
(about 72 °C; ΔS in kJ/K, 2.9 J/K = 0.0029 kJ/K).
e. For melting, ΔH > 0 and ΔS > 0; for freezing, both are negative. With : above the melting point, TΔS is larger than ΔH, so ΔG(melting) < 0 and melting is spontaneous (ice melts on a warm day). Below it, ΔH outweighs TΔS, ΔG(melting) > 0, and the reverse, freezing, has ΔG < 0 and is spontaneous (water freezes in a freezer). At the melting point ΔG = 0, and ice and water are in equilibrium. So each is spontaneous, but at a different temperature.
Standard enthalpies of formation are given:
| Substance | ΔH°f (kJ/mol) |
|---|---|
| NH₃(g) | −45.9 |
| O₂(g) | 0.0 |
| NO(g) | +90.3 |
| H₂O(g) | −241.8 |
| H₂O(l) | −285.8 |
- a.What is meant by standard enthalpy of formation?
- b.Why is the value zero for oxygen?
- c.Which substance is the most difficult to form, and why?
- d.Which substance is the most stable, and which the least stable?
- e.Calculate the calorific value of ammonia and of nitric oxide.
Answer
- a.The standard enthalpy of formation of a compound is the enthalpy change when one mole of it is formed from its elements in their standard states, under standard conditions (1 bar, usually 298 K).
- b.Oxygen gas, O₂, is an element in its standard state. Forming it from O₂ is no change at all, so no heat is absorbed or released: ΔH°f = 0 by definition.
- c.NO, the only one with a positive ΔH°f (+90.3 kJ/mol): forming it from N₂ and O₂ takes in heat, and needs the strong N≡N bond broken, so it forms only at very high temperatures (lightning, engine cylinders).
- d.Most stable: H₂O(l), the most negative ΔH°f (−285.8 kJ/mol), the most energy released in forming it from its elements. Least stable: NO (+90.3 kJ/mol), which holds more energy than its elements.
- e.Ammonia burns in oxygen to nitrogen and water:
NH₃ = 17.03 g/mol, so its calorific value is 382.8 ÷ 17.03 = 22.5 kJ/g (18.6 kJ/g if the water is left as vapor). Ammonia is being tried as a carbon-free fuel for ships.
Nitric oxide is not a fuel: it can only combine with more oxygen, to NO₂, and the table doesn’t give NO₂’s value. With ΔH°f(NO₂) = +33.2 kJ/mol from standard tables, has ΔH° = 33.2 − 90.3 = −57.1 kJ/mol; NO = 30.01 g/mol, so it releases 1.90 kJ/g, very little.
The standard enthalpies of formation of acetylene (ethyne), ethene and ethane are:
The textbook gives only acetylene’s and ethane’s values, but the reaction it asks about is of ethene, so the book’s data don’t fit the question; ethene’s value is added here, and the answer is given for acetylene too.
- a.What is meant by standard enthalpy of formation?
- b.How can these values be used to compare the stability and reactivity of the substances?
- c.Using Hess’s law, calculate the enthalpy change of the reaction
Answer
- a.The standard enthalpy of formation of a compound is the enthalpy change when one mole of it is formed from its elements in their standard states under standard conditions.
- b.The more negative ΔH°f, the more stable the compound relative to its elements, and the less energy it holds to give out in reactions. Ethane (−84.7) is the most stable and least reactive of the three; ethene (+52.4) and especially ethyne (+226.7) hold more energy than their elements: they are less stable and more reactive (they add hydrogen, bromine and other reagents readily, and ethyne burns with the hottest flame, used in welding).
- c.
By Hess’s law this is the same as decomposing ethene into its elements (−52.4 kJ) and forming ethane from them (−84.7 kJ).
For acetylene, : .
Bond enthalpies are given:
| Bond | Enthalpy (kJ/mol) |
|---|---|
| C–H | 413 |
| C–C | 347 |
| Cl–Cl | 239 |
| H–Cl | 427 |
| C–Cl | 339 |
- a.Define bond enthalpy.
- b.What factors affect the value of a bond enthalpy?
- c.Which of these bonds is the most difficult to break, and why?
- d.Calculate the enthalpy change of the reaction
Answer
- a.The bond enthalpy is the energy needed to break one mole of a particular bond in gaseous molecules into gaseous atoms (an average over many compounds); the same energy is released when one mole of the bond forms.
- b.Bond order (triple > double > single), bond length (shorter bonds are stronger), the size of the atoms (small atoms bond more strongly), and the difference in electronegativity (which adds ionic attraction to the bond).
- c.H–Cl, 427 kJ/mol, the largest value in the table. Hydrogen is the smallest atom, and the large difference in electronegativity between H and Cl (2.2 and 3.2) gives the bond a strong ionic attraction on top of the shared pair. (It is not the shortest bond in the table: C–H, 109 pm, is shorter than H–Cl, 127 pm, but weaker, since carbon and hydrogen differ little in electronegativity.)
- d.. Only one C–H bond and the Cl–Cl bond are broken; one C–Cl and one H–Cl bond are formed (the C–C and five C–H bonds are unchanged).
Broken: C–H + Cl–Cl = 413 + 239 = 652 kJ.
Formed: C–Cl + H–Cl = 339 + 427 = 766 kJ.
Exothermic.
Gibbs free energy change is the final test of whether a process is spontaneous.
- a.Define spontaneity and Gibbs free energy.
- b.How is the free energy change related to the enthalpy change and the entropy change?
- c.Under what condition of free energy change is a process spontaneous?
- d.Say whether each process is spontaneous, and at what temperatures:
- i.evaporation of a liquid
- ii.dissolving NaCl in water
- iii.crystallization of copper sulphate from its solution
Answer
- a.A process is spontaneous if, once started, it goes on by itself without a continuing input of energy from outside. Gibbs free energy, , is the energy of a system available to do useful work at constant temperature and pressure.
- b. (and ΔG° = ΔH° − TΔS° under standard conditions).
- c.At constant temperature and pressure: ΔG < 0, spontaneous; ΔG = 0, at equilibrium; ΔG > 0, non-spontaneous (the reverse is spontaneous).
d.
- i.Evaporation: ΔH > 0 (heat absorbed), ΔS > 0 (liquid to gas). Spontaneous at high temperature, where TΔS > ΔH: above the boiling point at that pressure. (Water does evaporate below its boiling point into air that isn’t saturated, because the vapor is then spread at a low pressure, which raises its entropy.)
- ii.Dissolving NaCl: ΔH is slightly positive (+3.9 kJ/mol) and ΔS positive (+43 J/(mol K)). ΔG < 0 above 3900 ÷ 43 ≈ 90 K, so it is spontaneous at all ordinary temperatures (and a little more so when hot).
- iii.Crystallization of copper sulphate: the ions leave the solution for an ordered crystal, ΔS < 0, and heat is released, ΔH < 0. Spontaneous at low temperature: crystals form as a hot saturated solution cools.
