Skip to content

← Grade 12 Chemistry Model Papers

Grade 12 Chemistry Model Paper 2

Full marks: 75Time: 3 hours

Answer every question; where a question has an OR question, answer either one.

A full practice run of the NEB Grade 12 Chemistry paper (Che. 302): 75 marks in 3 hours, 12 questions in three groups. Group A is one question of 11 multiple-choice items, about 25 minutes; groups B and C have short- and long-answer questions of two to four parts, with each part's marks shown. Questions 2 and 6 in group B and Questions 10 and 12 in group C each have an OR question: answer either the question or its OR question, every part from the same one, and mark only the one you answered. Write on paper first, then tap your choice in group A and open each other part's answer to give yourself the marks its scheme allows. Where needed, take the atomic masses H = 1, C = 12, N = 14, O = 16, S = 32, Ca = 40, R=8.314 R = 8.314 J K⁻¹ mol⁻¹, F=96,485 F = 96{,}485 C mol⁻¹, Kw=1.0×10−14 K_w = 1.0 \times 10^{-14} and 2.303RTF=0.0592 \dfrac{2.303RT}{F} = 0.0592 V at 25 °C.

A practice paper by Science Playground, made to CDC’s Specification Grid 2078, Grade 12 Chemistry (Che. 302). Not an official CDC or NEB paper; the real NEB Grade 12 exam may differ.

Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.

Paper to print (PDF, 5 pages) Answer key and marking scheme

Group AMultiple choice11 marks

Question 1

11 × 1 = 11

Choose the correct option for each of the following questions.

a.

4.9 g of sulphuric acid (M = 98) is dissolved in water and made up to 500 mL. What is the normality of the solution?

Pick an answer to see why.

b.

The molar solubility of calcium fluoride, CaFX2 \ce{CaF2} , in water at 25 °C is 2.0×10−4 2.0 \times 10^{-4} mol/L. What is its solubility product?

Pick an answer to see why.

c.

For NX2(g)+3 HX2(g)→2 NHX3(g) \ce{N2(g) + 3H2(g) -> 2NH3(g)} , ΔH∘=−92.2 \Delta H^\circ = -92.2 kJ and ΔS∘=−198.1 \Delta S^\circ = -198.1 J K⁻¹ at 25 °C. What is ΔG∘ \Delta G^\circ at 25 °C?

Pick an answer to see why.

d.

Which of these does a catalyst do to a reversible reaction?

Pick an answer to see why.

e.

Which metal is the catalyst in the Haber process for making ammonia?

Pick an answer to see why.

f.

Why doesn't copper give hydrogen with dilute hydrochloric acid?

Pick an answer to see why.

g.

What is power alcohol?

Pick an answer to see why.

h.

What is the main product when nitrobenzene is reduced with zinc dust and ammonium chloride solution (a neutral medium)?

Pick an answer to see why.

i.

Engineers often prefer Portland pozzolana cement (PPC) to ordinary Portland cement (OPC) for the thick concrete of a dam. Why?

Pick an answer to see why.

j.

Paracetamol, sold in every medical shop in Nepal, lowers a fever and eases pain. To which two groups of drugs does it belong?

Pick an answer to see why.

k.

A nucleus of uranium-238 (92238U ^{238}_{92}\text{U} ) gives out one alpha particle and then two beta particles (β⁻), one after the other. Which statement about the final nucleus is correct?

Pick an answer to see why.

Group BShort answers, each on one content area40 marks

Question 2

5 marks

Utsab builds a cell from a nickel rod in 1 M nickel sulphate and a silver rod in 1 M silver nitrate, joined by a salt bridge. ENiX2+/Ni∘=−0.26 E^\circ_{\ce{Ni^2+/Ni}} = -0.26 V, EAgX+/Ag∘=+0.80 E^\circ_{\ce{Ag+/Ag}} = +0.80 V, EZnX2+/Zn∘=−0.76 E^\circ_{\ce{Zn^2+/Zn}} = -0.76 V, EAlX3+/Al∘=−1.66 E^\circ_{\ce{Al^3+/Al}} = -1.66 V.

a.
[1]

Define standard electrode potential.

Answer

The standard electrode potential of an electrode is its potential measured against the standard hydrogen electrode (taken as 0 V) when all the substances are in their standard states: ions at 1 M concentration, gases at 1 atm (1 bar), at 25 °C (298 K).

Marking scheme
  • The potential against the SHE with ions at 1 M, gases at 1 atm, at 25 °C.
b.
[2]

Write the cell notation of Utsab's cell, marking the anode and the cathode, and calculate its standard emf.

Answer

Nickel has the lower reduction potential, so it is the anode (oxidized), and silver the cathode:
Ni(s) ∣ NiX2+(1 M)anode ∥ AgX+(1 M) ∣ Ag(s)cathode \underset{\text{anode}}{\ce{Ni(s) | Ni^2+(1 M)}} \ \|\ \underset{\text{cathode}}{\ce{Ag+(1 M) | Ag(s)}}
Ecell∘=Ecathode∘−Eanode∘=0.80−(−0.26)=1.06 V E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = 0.80 - (-0.26) = \mathbf{1.06\ V}
The cell reaction is Ni+2 AgX+→NiX2++2 Ag \ce{Ni + 2Ag+ -> Ni^2+ + 2Ag} .

Marking scheme
  • Cell notation Ni ∣ NiX2+ ∣∣ AgX+ ∣ Ag \ce{Ni | Ni^2+ || Ag+ | Ag} , with nickel the anode and silver the cathode.
  • Ecell∘=0.80−(−0.26)=1.06 E^\circ_{\text{cell}} = 0.80 - (-0.26) = 1.06 V.
c.
[2]

Can zinc sulphate solution be stored in an aluminium can? Explain with the help of the electrode potentials.

Answer

No. Aluminium (−1.66 V) has a lower reduction potential than zinc (−0.76 V), so it is the stronger reducing agent and gives electrons to the zinc ions:
2 Al+3 ZnX2+→2 AlX3++3 ZnEcell∘=−0.76−(−1.66)=+0.90 V \ce{2Al + 3Zn^2+ -> 2Al^3+ + 3Zn} \qquad E^\circ_{\text{cell}} = -0.76 - (-1.66) = +0.90 \text{ V}
Ecell∘ E^\circ_{\text{cell}} is positive (so ΔG° is negative): the reaction is spontaneous. The can would dissolve and zinc would be deposited, so the solution would be spoiled and the can holed.

Marking scheme
  • No: Al (−1.66 V) is a stronger reducing agent than Zn (−0.76 V) and displaces it.
  • The reaction
    2 Al+3 ZnX2+→2 AlX3++3 Zn \ce{2Al + 3Zn^2+ -> 2Al^3+ + 3Zn}
    has E∘=+0.90 E^\circ = +0.90 V, positive, so spontaneous.

OR

Rojina wants to know how much calcium carbonate is in a lump of limestone from a quarry in Makwanpur. She dissolves 1.25 g of the powdered sample in 50.0 mL of 0.50 N hydrochloric acid. The acid left over needs 25.0 mL of 0.40 N sodium hydroxide for neutralization.

a.
[1]

State the law of equivalence.

Answer

Substances always react with each other in the ratio of their equivalent weights: one gram-equivalent of one substance reacts with exactly one gram-equivalent of another. So in a titration, at the equivalence point, N1V1=N2V2 N_1V_1 = N_2V_2 .

Marking scheme
  • Substances react in equal numbers of gram-equivalents (N1V1=N2V2 N_1V_1 = N_2V_2 ).
b.
[2]

How many milliequivalents of hydrochloric acid reacted with the calcium carbonate?

Answer

HCl taken=N×V=0.50×50.0=25.0 meq \text{HCl taken} = N \times V = 0.50 \times 50.0 = 25.0 \text{ meq}
HCl left over=NaOH used=0.40×25.0=10.0 meq \text{HCl left over} = \text{NaOH used} = 0.40 \times 25.0 = 10.0 \text{ meq}
HCl used by CaCOX3=25.0−10.0=15.0 meq \text{HCl used by } \ce{CaCO3} = 25.0 - 10.0 = \mathbf{15.0\ meq}

Marking scheme
  • HCl taken 25.0 meq and HCl left over (= NaOH) 10.0 meq.
  • HCl used by CaCO₃ = 15.0 meq.
c.
[2]

Find the percentage of calcium carbonate in the limestone, and explain why Rojina did not titrate the limestone directly with the acid.

Answer

The equivalent weight of CaCOX3 \ce{CaCO3} is 100/2 = 50, so 15.0 meq of it weighs 15.0×50=750 15.0 \times 50 = 750 mg = 0.75 g.
% CaCOX3=0.751.25×100=60% \%\ \ce{CaCO3} = \frac{0.75}{1.25} \times 100 = \mathbf{60\%}
This is a back titration. Limestone is insoluble and reacts slowly with the acid, so its end point could not be seen in a direct titration. Dissolving it in a known excess of acid lets the reaction finish, and the excess is then titrated easily.

Marking scheme
  • Mass of CaCO₃ = 15.0 × 50 mg = 0.75 g, so 60%.
  • Back titration because limestone is insoluble and reacts slowly; a direct end point cannot be seen.

Question 3

5 marks

Kritika follows the hydrolysis of methyl ethanoate in dilute hydrochloric acid:
CHX3COOCHX3+HX2O→HX+CHX3COOH+CHX3OH \ce{CH3COOCH3 + H2O ->[H+] CH3COOH + CH3OH}
She finds that 30% of the ester is hydrolyzed in 40 minutes.

a.
[1]

What is a pseudo-first-order reaction?

Answer

A pseudo-first-order reaction is one that has a higher molecularity (here two molecules react) but behaves as first order, because one reactant (here water, the solvent) is in such large excess that its concentration hardly changes during the reaction.

Marking scheme
  • A reaction of higher order that behaves as first order because the other reactant is in large excess (its concentration stays constant).
b.
[2]

Calculate the rate constant of the reaction.

Answer

After 40 min, 70% of the ester is left, so [A]0/[A]=100/70 [\ce{A}]_0/[\ce{A}] = 100/70 .
k=2.303tlog⁡[A]0[A]=2.30340log⁡10070=2.303×0.15540=8.92×10−3 min−1 k = \frac{2.303}{t}\log\frac{[\ce{A}]_0}{[\ce{A}]} = \frac{2.303}{40}\log\frac{100}{70} = \frac{2.303 \times 0.155}{40} = \mathbf{8.92 \times 10^{-3}\ min^{-1}}

Marking scheme
  • The first-order equation with [A]0/[A]=100/70 [\ce{A}]_0/[\ce{A}] = 100/70 (not 100/30).
  • k=8.92×10−3 k = 8.92 \times 10^{-3} min⁻¹.
c.
[2]

Find how long it takes for 90% of the ester to be hydrolyzed. Kritika expects that if she starts again with twice the concentration of ester, 90% of it will be hydrolyzed in half that time. Is she right? Explain.

Answer

For 90% hydrolysis, 10% is left: [A]0/[A]=10 [\ce{A}]_0/[\ce{A}] = 10 , and log⁡10=1 \log 10 = 1 .
t90%=2.303klog⁡10=2.3038.92×10−3≈258 min t_{90\%} = \frac{2.303}{k}\log 10 = \frac{2.303}{8.92 \times 10^{-3}} \approx \mathbf{258\ min}
She is wrong. In a first-order reaction the time to use up a given fraction depends only on k: t=2.303klog⁡[A]0[A] t = \dfrac{2.303}{k}\log\dfrac{[\ce{A}]_0}{[\ce{A}]} , and the ratio [A]0/[A] [\ce{A}]_0/[\ce{A}] for 90% is 10 whatever the starting concentration. With twice the ester the rate is twice as great at every stage, but there is twice as much to use up, so it still takes 258 minutes.

Marking scheme
  • t90%=(2.303/k)log⁡10≈258 t_{90\%} = (2.303/k)\log 10 \approx 258 min.
  • No: for a first-order reaction the time for a given fraction is independent of the initial concentration (the ratio is 10 either way).

Question 4

5 marks

Aman's family runs a hardware shop in Biratnagar that sells cast iron pans, steel rods (TMT bars) for building and wrought iron gates. All three are made from the iron of a blast furnace.

a.
[2]

Name two ores of iron and give their formulas.

Answer

Any two of: haematite, FeX2OX3 \ce{Fe2O3} ; magnetite, FeX3OX4 \ce{Fe3O4} ; limonite, 2 FeX2OX3 ⋅ 3 HX2O \ce{2Fe2O3.3H2O} ; siderite, FeCOX3 \ce{FeCO3} ; iron pyrites, FeSX2 \ce{FeS2} (not used for extraction).

Marking scheme
  • One ore named with its correct formula.
  • A second ore named with its correct formula.
b.
[1]

Explain the role of limestone in the blast furnace, with equations.

Answer

Limestone is a flux. It breaks up into lime, which combines with the sandy impurity (silica) of the ore to form a fusible slag, calcium silicate, that floats on the molten iron and is run off:
CaCOX3→CaO+COX2CaO+SiOX2→CaSiOX3 \ce{CaCO3 -> CaO + CO2} \qquad \ce{CaO + SiO2 -> CaSiO3}

Marking scheme
  • Flux: CaO from limestone removes silica as calcium silicate slag (both equations).
c.
[2]

Steel for TMT bars is made by blowing oxygen through molten pig iron, which burns off carbon as its oxides. Take pig iron as iron with 4.00% carbon, and suppose no iron is lost. What mass of carbon must be burnt off from 1.00 tonne of it to leave steel with 0.50% carbon?

Answer

The iron is not burnt off, so its mass stays the same; only the carbon falls, and the total mass falls with it.

Iron in 1.00 t of pig iron = 96.00% of 1000 kg = 960 kg. In the steel this iron is 99.50% of the mass:
mass of steel=9600.995=964.8 kgcarbon left=964.8−960=4.8 kg \text{mass of steel} = \frac{960}{0.995} = 964.8 \text{ kg} \qquad \text{carbon left} = 964.8 - 960 = 4.8 \text{ kg}
carbon burnt off=40.0−4.8=35.2 kg \text{carbon burnt off} = 40.0 - 4.8 = \mathbf{35.2\ kg}
(Taking 4.00% − 0.50% = 3.50% of 1000 kg, 35.0 kg, forgets that the steel weighs less than the pig iron.)

Marking scheme
  • The iron (960 kg) stays constant and is 99.5% of the steel: steel 964.8 kg, carbon left 4.8 kg.
  • Carbon burnt off = 40.0 − 4.8 = 35.2 kg.

Question 5

5 marks

The elements from scandium to zinc fill the 3d orbitals.

a.
[2]

Write any two characteristic properties of transition metals.

Answer

Any two of: they show variable oxidation states; they form colored ions and compounds; they form complexes; they and their compounds are good catalysts; many are paramagnetic; they are hard metals with high melting points; they form alloys and interstitial compounds.

Marking scheme
  • One characteristic property.
  • A second characteristic property.
b.
[1]

Find the oxidation state of chromium in potassium dichromate, KX2CrX2OX7 \ce{K2Cr2O7} , and the number of its 3d electrons in that state (Z of chromium = 24).

Answer

2(+1)+2x+7(−2)=0 2(+1) + 2x + 7(-2) = 0 , so x= x = +6. Chromium is [Ar] 3d⁵ 4s¹, six electrons beyond argon; in the +6 state all six are used, so it has no 3d electrons (3d⁰).

Marking scheme
  • Cr is +6 (2 + 2x − 14 = 0), with 3d⁰.
c.
[2]

The +2 ion of a metal M of the first transition series (Sc to Zn) has a spin-only magnetic moment of 5.92 BM in a weak-field complex. Identify M, and say whether its +3 ion should be more or less stable than its +2 ion, giving the reason.

Answer

n(n+2)=5.92 \sqrt{n(n+2)} = 5.92 gives n(n+2)=35 n(n+2) = 35 , so n = 5 unpaired electrons: in a weak field the ion is 3d5 3d^5 , one electron in each d orbital. A +2 ion has lost the two 4s electrons, so the atom is [Ar] 3d⁵ 4s²: M is manganese (Z = 25).

Mn²⁺ (3d⁵) has a half-filled d subshell, which is especially stable; Mn³⁺ would be 3d⁴, losing that arrangement. So Mn³⁺ is less stable than Mn²⁺, and manganese(III) compounds are readily reduced to manganese(II).

Marking scheme
  • n(n + 2) = 35, so n = 5, the ion is 3d⁵ and M is manganese.
  • Mn³⁺ (3d⁴) is less stable than Mn²⁺, whose half-filled 3d⁵ is especially stable.

Question 6

5 marks

Anjila has a bottle of 2-bromopropane, the two alcohols of formula CX3HX8O \ce{C3H8O} , and an ether whose label has faded.

a.
[1]

Write the structural formula of 2-bromopropane and say whether it is a primary, secondary or tertiary haloalkane.

Answer

CHX3CHBrCHX3 \ce{CH3CHBrCH3} . The carbon carrying the bromine is joined to two other carbons, so it is a secondary haloalkane.

Marking scheme
  • CH₃CHBrCH₃, secondary.
b.
[2]

How would she tell propan-1-ol from propan-2-ol with Lucas reagent? Name the reagent's contents and say what she would see.

Answer

Lucas reagent is anhydrous zinc chloride in concentrated hydrochloric acid. Shaken with it at room temperature, an alcohol turns into a chloroalkane, which does not dissolve and makes the mixture cloudy:
CHX3CH(OH)CHX3+HCl→ZnClX2CHX3CHClCHX3+HX2O \ce{CH3CH(OH)CH3 + HCl ->[ZnCl2] CH3CHClCH3 + H2O}
Propan-2-ol (secondary) turns cloudy in about 5 minutes; propan-1-ol (primary) stays clear at room temperature (it reacts only on heating). (A tertiary alcohol would turn cloudy at once.)

Marking scheme
  • Lucas reagent: anhydrous ZnCl₂ in conc. HCl; the alcohol forms an insoluble chloroalkane (turbidity).
  • Propan-2-ol turns cloudy in about 5 minutes; propan-1-ol stays clear at room temperature.
c.
[2]

The ether, X, is CX4HX10O \ce{C4H10O} . Heated with excess concentrated hydroiodic acid, it gives water and only one organic product. Identify X, giving your reason, and write the equation.

Answer

With excess HI an ether R–O–R′ gives two iodoalkanes, RI and R′I. Only one organic product means the two groups are the same: X is a symmetrical ether. The ethers CX4HX10O \ce{C4H10O} are ethoxyethane, 1-methoxypropane and 2-methoxypropane, and only ethoxyethane has two equal groups, so X is ethoxyethane (diethyl ether), and the product is iodoethane:
CX2HX5OCX2HX5+2 HI→Δ2 CX2HX5I+HX2O \ce{C2H5OC2H5 + 2HI ->[\Delta] 2C2H5I + H2O}

Marking scheme
  • One product means a symmetrical ether: of the C₄H₁₀O ethers, X is ethoxyethane.
  • CX2HX5OCX2HX5+2 HI→2 CX2HX5I+HX2O \ce{C2H5OC2H5 + 2HI -> 2C2H5I + H2O} .

OR

Ethyl ethanoate gives the fruity smell of some nail-polish removers.

a.
[1]

What is esterification?

Answer

Esterification is the reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst (concentrated sulphuric acid), to form an ester and water.

Marking scheme
  • Acid + alcohol → ester + water, with an acid catalyst.
b.
[2]

Write the equations for the preparation of ethyl ethanoate from ethanoic acid, and for its hydrolysis by boiling with sodium hydroxide solution.

Answer

CHX3COOH+CX2HX5OH⇌conc. HX2SOX4CHX3COOCX2HX5+HX2O \ce{CH3COOH + C2H5OH <=>[conc{.} H2SO4] CH3COOC2H5 + H2O}
Alkaline hydrolysis (saponification) gives the salt of the acid and the alcohol:
CHX3COOCX2HX5+NaOH→ΔCHX3COONa+CX2HX5OH \ce{CH3COOC2H5 + NaOH ->[\Delta] CH3COONa + C2H5OH}

Marking scheme
  • Esterification equation (with conc. H₂SO₄, reversible).
  • Saponification equation: sodium ethanoate and ethanol.
c.
[2]

Esterification is done with concentrated sulphuric acid and an excess of the alcohol. Explain why both are used.

Answer

Esterification is reversible and slow. Concentrated sulphuric acid is a catalyst (it protonates the acid's C=O, making the carbon easier for the alcohol to attack), so equilibrium is reached faster; it is also a dehydrating agent, taking up the water formed.

Removing water and using an excess of alcohol both push the equilibrium to the right (Le Chatelier's principle), so more of the acid turns into ester.

Marking scheme
  • Conc. H₂SO₄ catalyzes the slow reaction and removes water (dehydrating agent).
  • The reaction is reversible; excess alcohol (and removing water) shift the equilibrium towards the ester.

Question 7

5 marks

Chlorobenzene is made from benzene, and was once the starting point for most of the world's phenol.

a.
[1]

Name the reaction in which benzenediazonium chloride is warmed with copper(I) chloride in hydrochloric acid to give chlorobenzene.

Answer

The Sandmeyer reaction:
CX6HX5NX2X+ClX−→CuCl/HClCX6HX5Cl+NX2 \ce{C6H5N2+Cl- ->[CuCl/HCl] C6H5Cl + N2}

Marking scheme
  • Sandmeyer reaction.
b.
[2]

The chlorine atom of chlorobenzene makes the ring react more slowly with electrophiles than benzene does, yet it sends the new group to the ortho and para positions. Explain both.

Answer

Chlorine is more electronegative than carbon, so it pulls electrons out of the ring through the σ bond (−I effect). This lowers the electron density of the whole ring, so electrophiles attack it more slowly: the ring is deactivated.

But chlorine also has lone pairs, which it gives back into the ring by resonance (+R effect). This puts extra electron density at the ortho and para positions only, so of the positions left, those are attacked: chlorine is an ortho/para director. The −I effect is stronger overall, the +R effect decides the positions.

Marking scheme
  • −I effect of Cl lowers the ring's electron density: deactivated.
  • +R effect of Cl's lone pairs raises the density at ortho and para positions: o/p directing.
c.
[2]

Phenol made from chlorobenzene gives a white precipitate at once with bromine water, while benzene needs liquid bromine and an iron(III) bromide catalyst to be brominated. Write the equation for phenol, and explain the difference.

Answer

CX6HX5OH+3 BrX2(aq)→CX6HX2BrX3OH↓+3 HBr \ce{C6H5OH + 3Br2(aq) -> C6H2Br3OH v + 3HBr}
The white precipitate is 2,4,6-tribromophenol.

The –OH group gives electrons to the ring by resonance, so the ring of phenol is strongly activated, especially at the two ortho and the para positions. In water phenol is partly ionized to the phenoxide ion, more activated still, and the polar water helps polarize the bromine, so no catalyst is needed and all three positions are substituted at once. Benzene's ring has no such group, so it needs FeBr₃ to make a strong electrophile, BrX+ \ce{Br+} .

Marking scheme
  • The equation, giving 2,4,6-tribromophenol.
  • –OH strongly activates the ring (o/p) by resonance, so no catalyst is needed and three Br atoms enter; benzene needs FeBr₃.

Question 8

5 marks

Rehan has three amines, CHX3NHX2 \ce{CH3NH2} , (CHX3)X2NH \ce{(CH3)2NH} and CX6HX5NHX2 \ce{C6H5NH2} , and a sample of ammonia solution.

a.
[1]

Write the IUPAC name of (CHX3)X2NCHX2CHX3 \ce{(CH3)2NCH2CH3} and classify it.

Answer

N,N-Dimethylethanamine: the nitrogen carries three alkyl groups, so it is a tertiary (3°) amine.

Marking scheme
  • N,N-Dimethylethanamine, tertiary.
b.
[2]

Ethanamine, CX2HX5NHX2 \ce{C2H5NH2} , is treated with nitrous acid (sodium nitrite and dilute hydrochloric acid) in the cold. Write the equation, name the main organic product and say what is seen.

Answer

CX2HX5NHX2+HNOX2→CX2HX5OH+NX2↑+HX2O \ce{C2H5NH2 + HNO2 -> C2H5OH + N2 ^ + H2O}
The main organic product is ethanol (in practice with some alkene and other products), and bubbles of nitrogen gas are given off (brisk effervescence), the reliable sign of a primary aliphatic amine.

Marking scheme
  • The balanced equation, ethanol formed.
  • Nitrogen gas is evolved (effervescence).
c.
[2]

Arrange the three amines and ammonia in increasing order of their basic strength in aqueous solution, and give the reasons.

Answer

CX6HX5NHX2<NHX3<CHX3NHX2<(CHX3)X2NH \ce{C6H5NH2} < \ce{NH3} < \ce{CH3NH2} < \ce{(CH3)2NH}
Alkyl groups push electrons towards the nitrogen (+I effect), making its lone pair more available for a proton, so the alkyl amines are stronger bases than ammonia, and two methyl groups more than one (in water the dimethylammonium ion is also well solvated). In aniline the lone pair is delocalized into the benzene ring, so it is the weakest base of the four.

Marking scheme
  • The order CX6HX5NHX2<NHX3<CHX3NHX2<(CHX3)X2NH \ce{C6H5NH2} < \ce{NH3} < \ce{CH3NH2} < \ce{(CH3)2NH} .
  • Reasons: +I effect of alkyl groups raises the lone pair's availability; aniline's lone pair is delocalized into the ring.

Question 9

5 marks

Gyanu visits a handmade lokta paper workshop in Baglung and reads about the closed Bhrikuti paper mill at Gaindakot, which made pulp from rice straw, babiyo grass and bamboo.

a.
[1]

Name the natural polymer of which paper fibers are mainly made.

Answer

Cellulose (a long chain of glucose units).

Marking scheme
  • Cellulose.
b.
[2]

Explain the difference between mechanical pulping and chemical (kraft) pulping, and why kraft pulp gives stronger paper.

Answer

Mechanical pulping grinds or tears the wood apart in water: nothing is removed, so the yield is high (about 90–95%), but the fibers are cut short and still coated with lignin.

Kraft pulping cooks wood chips in a digester at about 160–170 °C in white liquor (sodium hydroxide and sodium sulphide), which dissolves the lignin and frees the cellulose fibers whole and long. The long, clean fibers bond to each other well through hydrogen bonds, so the paper is stronger and lasts longer (the yield is only about 45–50%).

Marking scheme
  • Mechanical: fibers torn apart, lignin kept, short fibers, high yield.
  • Kraft: NaOH and Na₂S dissolve the lignin, leaving long, clean fibers that bond strongly, so the paper is stronger.
c.
[1]

A kraft mill gives a pulp yield of 45% of the dry mass of its bamboo chips. How much pulp does it make from 20 tonnes of dry chips?

Answer

20×45100= 20 \times \dfrac{45}{100} = 9 tonnes of pulp.

Marking scheme
  • 20 × 0.45 = 9 t.
d.
[1]

In a library's conservation room, Gyanu sees brown, brittle pages of a book printed in the 1950s on rosin-and-alum sized paper being soaked in a dilute solution of magnesium hydrogencarbonate and dried. Give the chemical reason this saves the book.

Answer

Alum is slightly acidic, and in damp air the acid slowly hydrolyzes the cellulose chains, so the paper browns and crumbles. Magnesium hydrogencarbonate is a mild base: it neutralizes the acid in the paper and, as it dries, leaves a little magnesium carbonate in the fibers to neutralize acid formed later, so the chains stop being broken.

Marking scheme
  • The base neutralizes the acid (from alum) that hydrolyzes the cellulose, so the breakdown stops (an alkaline reserve left in the paper also earns the mark).

Group CLong answers, each on one content area24 marks

Question 10

8 marks

Sudarshan's family in Chitwan cooks on biogas, which is mostly methane. Standard enthalpies at 25 °C: of combustion of methane −890.3 kJ mol⁻¹, of formation of COX2(g) \ce{CO2(g)} −393.5 kJ mol⁻¹ and of HX2O(l) \ce{H2O(l)} −285.8 kJ mol⁻¹.

a.
[3]

Ice melts by itself at 10 °C although melting takes in heat. Explain, with the help of entropy and Gibbs free energy, why a process can be spontaneous though it is endothermic.

Answer

Entropy (S) is a measure of the disorder (randomness) of a system. When ice melts, the ordered crystal becomes a liquid whose molecules move freely, so ΔS is positive.

Whether a change is spontaneous at constant temperature and pressure is decided by the Gibbs free energy, ΔG=ΔH−TΔS \Delta G = \Delta H - T\Delta S : it is spontaneous when ΔG is negative. ΔH alone does not decide it.

For melting, ΔH is positive but ΔS is positive too. Above 0 °C (273 K) the term TΔS T\Delta S is larger than ΔH, so ΔG is negative and ice melts by itself; below 0 °C it is smaller, ΔG is positive, and ice does not melt.

Marking scheme
  • Entropy measures disorder; melting increases it (ΔS > 0).
  • Spontaneity is decided by ΔG=ΔH−TΔS<0 \Delta G = \Delta H - T\Delta S < 0 , not by ΔH alone.
  • Above 273 K, TΔS>ΔH T\Delta S > \Delta H , so ΔG < 0 and melting is spontaneous though endothermic.
b.
[3]

Use Hess's law to calculate the standard enthalpy of formation of methane.

Answer

The equations:
CHX4(g)+2 OX2(g)→COX2(g)+2 HX2O(l)ΔHc∘=−890.3 kJ \ce{CH4(g) + 2O2(g) -> CO2(g) + 2H2O(l)} \qquad \Delta H^\circ_c = -890.3 \text{ kJ}
C(s)+2 HX2(g)→CHX4(g)ΔHf∘=? \ce{C(s) + 2H2(g) -> CH4(g)} \qquad \Delta H^\circ_f = ?
By Hess's law, ΔHc∘=[ΔHf∘(COX2)+2ΔHf∘(HX2O)]−ΔHf∘(CHX4) \Delta H^\circ_c = [\Delta H^\circ_f(\ce{CO2}) + 2\Delta H^\circ_f(\ce{H2O})] - \Delta H^\circ_f(\ce{CH4}) , so
ΔHf∘(CHX4)=−393.5+2(−285.8)−(−890.3)=−393.5−571.6+890.3=−74.8 kJ mol−1 \Delta H^\circ_f(\ce{CH4}) = -393.5 + 2(-285.8) - (-890.3) = -393.5 - 571.6 + 890.3 = \mathbf{-74.8\ kJ\ mol^{-1}}

Marking scheme
  • The combustion equation and the formation equation of methane.
  • Hess's law relation between them.
  • ΔHf∘(CHX4)=−74.8 \Delta H^\circ_f(\ce{CH4}) = -74.8 kJ mol⁻¹.
c.
[2]

For NX2OX4(g)⇌2 NOX2(g) \ce{N2O4(g) <=> 2NO2(g)} , ΔG∘=+4.7 \Delta G^\circ = +4.7 kJ mol⁻¹ at 25 °C. Calculate its equilibrium constant at 25 °C. Given that ΔH∘=+57.2 \Delta H^\circ = +57.2 kJ mol⁻¹, say whether K becomes larger or smaller when the gas is warmed, and justify your answer from ΔG∘=ΔH∘−TΔS∘ \Delta G^\circ = \Delta H^\circ - T\Delta S^\circ .

Answer

ΔG∘=−2.303RTlog⁡K \Delta G^\circ = -2.303RT\log K
log⁡K=−47002.303×8.314×298=−0.824K=10−0.824≈0.15 \log K = -\frac{4700}{2.303 \times 8.314 \times 298} = -0.824 \qquad K = 10^{-0.824} \approx \mathbf{0.15}
ΔS∘=ΔH∘−ΔG∘T=57,200−4700298=+176 J K−1mol−1 \Delta S^\circ = \frac{\Delta H^\circ - \Delta G^\circ}{T} = \frac{57{,}200 - 4700}{298} = +176 \text{ J K}^{-1}\text{mol}^{-1}
K depends on ΔG∘/T \Delta G^\circ/T , not on ΔG° alone. Putting ΔG∘=ΔH∘−TΔS∘ \Delta G^\circ = \Delta H^\circ - T\Delta S^\circ into ΔG∘=−2.303RTlog⁡K \Delta G^\circ = -2.303RT\log K :
log⁡K=−ΔH∘2.303RT+ΔS∘2.303R \log K = -\frac{\Delta H^\circ}{2.303RT} + \frac{\Delta S^\circ}{2.303R}
The ΔS° term does not change with temperature. ΔH° is positive, so the first term, −ΔH∘/(2.303RT) -\Delta H^\circ/(2.303RT) , becomes less negative as T rises, and K becomes larger. For example, at 35 °C (308 K), ΔG∘=57,200−308×176≈+2990 \Delta G^\circ = 57{,}200 - 308 \times 176 \approx +2990 J mol⁻¹, log⁡K=−0.507 \log K = -0.507 and K ≈ 0.31, twice the value at 25 °C. Warming favors NOX2 \ce{NO2} , as expected for an endothermic forward reaction, and the brown color of the gas deepens. (Had ΔH° been negative, K would fall on warming, whatever the sign of ΔS°.)

Marking scheme
  • log⁡K=−ΔG∘/(2.303RT)=−0.824 \log K = -\Delta G^\circ/(2.303RT) = -0.824 , K ≈ 0.15.
  • K grows on warming: log⁡K=−ΔH∘/(2.303RT)+ΔS∘/(2.303R) \log K = -\Delta H^\circ/(2.303RT) + \Delta S^\circ/(2.303R) , and with ΔH° > 0 the first term becomes less negative as T rises (or ΔG°/T, worked out at a higher temperature, is smaller: K ≈ 0.31 at 308 K).

OR

A laboratory technician in Dhulikhel makes up 0.10 M solutions of three salts: ammonium chloride, sodium ethanoate and sodium chloride. Ka(CHX3COOH)=1.75×10−5 K_a(\ce{CH3COOH}) = 1.75 \times 10^{-5} .

a.
[3]

Explain, with equations, why the ammonium chloride solution is acidic, the sodium ethanoate solution basic and the sodium chloride solution neutral.

Answer

Ammonium chloride is the salt of a weak base and a strong acid. Its ammonium ion reacts with water (hydrolysis) and gives HX3OX+ \ce{H3O+} , so the solution is acidic (pH below 7):
NHX4X++HX2O⇌NHX3+HX3OX+ \ce{NH4+ + H2O <=> NH3 + H3O+}
Sodium ethanoate is the salt of a weak acid and a strong base. Its ethanoate ion takes a proton from water and leaves OHX− \ce{OH-} , so the solution is basic (pH above 7):
CHX3COOX−+HX2O⇌CHX3COOH+OHX− \ce{CH3COO- + H2O <=> CH3COOH + OH-}
Sodium chloride is the salt of a strong acid and a strong base. Neither NaX+ \ce{Na+} nor ClX− \ce{Cl-} reacts with water, so [HX+]=[OHX−] [\ce{H+}] = [\ce{OH-}] and the solution is neutral (pH 7).

Marking scheme
  • NH₄⁺ hydrolyzes to give H₃O⁺: acidic (equation).
  • CH₃COO⁻ hydrolyzes to give OH⁻: basic (equation).
  • Na⁺ and Cl⁻ do not hydrolyze: neutral.
b.
[3]

Calculate the pH of the 0.10 M sodium ethanoate solution.

Answer

Kh=KwKa=1.0×10−141.75×10−5=5.71×10−10 K_h = \frac{K_w}{K_a} = \frac{1.0 \times 10^{-14}}{1.75 \times 10^{-5}} = 5.71 \times 10^{-10}
[OHX−]=KhC=5.71×10−10×0.10=7.56×10−6 M [\ce{OH-}] = \sqrt{K_h C} = \sqrt{5.71 \times 10^{-10} \times 0.10} = 7.56 \times 10^{-6} \text{ M}
pOH=5.12pH=14−5.12=8.88 \text{pOH} = 5.12 \qquad \text{pH} = 14 - 5.12 = \mathbf{8.88}

Marking scheme
  • Kh=Kw/Ka=5.71×10−10 K_h = K_w/K_a = 5.71 \times 10^{-10} .
  • [OHX−]=KhC=7.56×10−6 [\ce{OH-}] = \sqrt{K_hC} = 7.56 \times 10^{-6} M.
  • pOH = 5.12, pH = 8.88.
c.
[2]

Ethanoic acid is titrated with sodium hydroxide. Which indicator would you choose, phenolphthalein (pH range 8.3–10) or methyl orange (3.1–4.4)? Justify your choice.

Answer

Phenolphthalein. At the equivalence point the flask holds sodium ethanoate solution, which is basic (pH about 8.9, as found above), and the steep part of the titration curve lies roughly between pH 7 and 10. Phenolphthalein changes color within that range, exactly at the end point.

Methyl orange would change color at pH 3–4, while plenty of ethanoic acid is still unneutralized, so it would give an end point far too early.

Marking scheme
  • Phenolphthalein: the equivalence point is basic (sodium ethanoate, pH about 9), within its range.
  • Methyl orange changes at pH 3–4, well before the equivalence point.

Question 11

8 marks

Shreya studies the derivatives of ethanoic acid: ethanoyl chloride, ethanoic anhydride, ethyl ethanoate and ethanamide.

a.
[3]

Ethanoyl chloride reacts violently with cold water, but ethanamide has to be boiled with acid or alkali for a long time to be hydrolyzed. Explain this order of reactivity.

Answer

All four derivatives react by nucleophilic acyl substitution: the nucleophile adds to the C=O carbon, and then the group attached to the acyl group leaves.

How easily this happens depends on the leaving group. ClX− \ce{Cl-} is a very weak base and leaves easily; and chlorine, strongly electron-withdrawing and giving back little electron density by resonance, leaves the carbonyl carbon strongly positive. So acid chlorides are the most reactive.

In an amide the nitrogen's lone pair is strongly delocalized onto the C=O (resonance), which makes the carbon much less positive, and NHX2X− \ce{NH2-} is a very strong base and a poor leaving group. So amides are the least reactive. Overall: acid chloride > acid anhydride > ester > amide.

Marking scheme
  • All react by nucleophilic acyl substitution (addition to C=O, then loss of the leaving group).
  • Cl⁻ is a good leaving group and Cl makes the C=O carbon strongly positive, so acid chlorides are the most reactive.
  • The amide's N lone pair is delocalized onto C=O and NH₂⁻ is a poor leaving group, so amides are least reactive (order: chloride > anhydride > ester > amide).
b.
[2]

Write the equations for the reaction of ethanoyl chloride with (i) water and (ii) ethanol.

Answer

(i)
CHX3COCl+HX2O→CHX3COOH+HCl \ce{CH3COCl + H2O -> CH3COOH + HCl}

(ii)
CHX3COCl+CX2HX5OH→CHX3COOCX2HX5+HCl \ce{CH3COCl + C2H5OH -> CH3COOC2H5 + HCl}
(ethyl ethanoate)

Marking scheme
  • With water: ethanoic acid and HCl.
  • With ethanol: ethyl ethanoate and HCl.
c.
[3]

An ester A, CX6HX12OX2 \ce{C6H12O2} , is boiled with dilute sulphuric acid and gives an acid B and an alcohol C. When C is oxidized with acidified potassium dichromate, it gives B. Identify A, B and C, and write the equations for the hydrolysis and the oxidation.

Answer

Since C oxidizes to B, the acid and the alcohol have the same carbon skeleton: three carbons each, out of six in the ester. An alcohol that is oxidized to a carboxylic acid must be primary, so C is propan-1-ol (not propan-2-ol, which would give propanone). So B is propanoic acid, C is propan-1-ol, and A is propyl propanoate, CHX3CHX2COOCHX2CHX2CHX3 \ce{CH3CH2COOCH2CH2CH3} .
CHX3CHX2COOCHX2CHX2CHX3+HX2O⇌HX+CHX3CHX2COOH+CHX3CHX2CHX2OH \ce{CH3CH2COOCH2CH2CH3 + H2O <=>[H+] CH3CH2COOH + CH3CH2CH2OH}
CHX3CHX2CHX2OH+2 [O]→KX2CrX2OX7/HX+CHX3CHX2COOH+HX2O \ce{CH3CH2CH2OH + 2[O] ->[K2Cr2O7/H+] CH3CH2COOH + H2O}

Marking scheme
  • Reasoning: B and C have the same three-carbon skeleton and C is a primary alcohol: A propyl propanoate, B propanoic acid, C propan-1-ol.
  • Hydrolysis equation.
  • Oxidation equation of propan-1-ol to propanoic acid.

Question 12

8 marks

Tenzing compares the carbonyl compounds methanal, ethanal, propanone and benzaldehyde.

a.
[2]

Why are aldehydes generally more reactive than ketones towards nucleophilic addition?

Answer

Electronic reason: alkyl groups push electrons (+I) towards the carbonyl carbon. A ketone has two alkyl groups and an aldehyde only one, so the carbon of a ketone is less positive and attracts nucleophiles less.

Steric reason: two alkyl groups also crowd the carbonyl carbon of a ketone more than one alkyl group and a small hydrogen do, so a nucleophile reaches it less easily, and the crowded product is less stable.

Marking scheme
  • Electronic: two +I alkyl groups make a ketone's carbonyl carbon less positive.
  • Steric: two alkyl groups hinder the nucleophile's approach more than in an aldehyde.
b.
[3]

Using a suitable Grignard reagent and carbonyl compound each time, show how you would prepare (i) a primary alcohol, propan-1-ol, (ii) a secondary alcohol, propan-2-ol, and (iii) a tertiary alcohol, 2-methylpropan-2-ol.

Answer

(i) Methanal with ethylmagnesium bromide:
HCHO+CX2HX5MgBr→CX2HX5CHX2OMgBr→HX2O/HX+CHX3CHX2CHX2OH \ce{HCHO + C2H5MgBr -> C2H5CH2OMgBr ->[H2O/H+] CH3CH2CH2OH}
(ii) Ethanal with methylmagnesium bromide:
CHX3CHO+CHX3MgBr→(CHX3)X2CHOMgBr→HX2O/HX+(CHX3)X2CHOH \ce{CH3CHO + CH3MgBr -> (CH3)2CHOMgBr ->[H2O/H+] (CH3)2CHOH}
(iii) Propanone with methylmagnesium bromide:
(CHX3)X2CO+CHX3MgBr→(CHX3)X3COMgBr→HX2O/HX+(CHX3)X3COH \ce{(CH3)2CO + CH3MgBr -> (CH3)3COMgBr ->[H2O/H+] (CH3)3COH}

Marking scheme
  • Propan-1-ol: methanal + C₂H₅MgBr, then hydrolysis.
  • Propan-2-ol: ethanal + CH₃MgBr, then hydrolysis.
  • 2-Methylpropan-2-ol: propanone + CH₃MgBr, then hydrolysis.
c.
[3]

Ethanal gives a silver mirror with Tollens' reagent and a red precipitate with Fehling's solution. Benzaldehyde gives the silver mirror but not the red precipitate, and propanone gives neither. Explain these results, and write the equation for ethanal with Tollens' reagent.

Answer

Both tests are mild oxidizing agents, which oxidize an aldehyde (with its H on the C=O) to the acid. Propanone is a ketone: with no H on its carbonyl carbon it is not oxidized by them, so it gives neither.

Fehling's solution (Cu²⁺ in alkaline tartrate) is a weaker oxidizing agent than Tollens' reagent: it oxidizes aliphatic aldehydes such as ethanal (giving red CuX2O \ce{Cu2O} ) but not aromatic aldehydes such as benzaldehyde, which still reduces Tollens' reagent. So Fehling's tells an aliphatic aldehyde from an aromatic one.
CHX3CHO+2 [Ag(NHX3)X2]X++3 OHX−→CHX3COOX−+2 Ag↓+4 NHX3+2 HX2O \ce{CH3CHO + 2[Ag(NH3)2]+ + 3OH- -> CH3COO- + 2Ag v + 4NH3 + 2H2O}

Marking scheme
  • Ketones (propanone) have no H on the C=O and are not oxidized by either reagent.
  • Fehling's is weaker: it oxidizes aliphatic aldehydes but not aromatic ones like benzaldehyde, which reduces only Tollens'.
  • The balanced equation for ethanal with Tollens' reagent.

OR

Two bottles have lost their labels: one holds propanal, CHX3CHX2CHO \ce{CH3CH2CHO} , the other propanone, CHX3COCHX3 \ce{CH3COCH3} . Both have the formula CX3HX6O \ce{C3H6O} .

a.
[2]

Both compounds give an orange-red precipitate with 2,4-dinitrophenylhydrazine (Brady's reagent). What does this test show, and why can't it tell them apart?

Answer

2,4-DNP reacts with the carbonyl group (C=O) of any aldehyde or ketone by addition followed by loss of water (condensation), giving a colored 2,4-dinitrophenylhydrazone.

So it shows only that a C=O group is present. Propanal and propanone both have one, so both give the precipitate, and the test cannot tell an aldehyde from a ketone.

Marking scheme
  • 2,4-DNP condenses with any C=O group (aldehyde or ketone) to give a colored hydrazone.
  • Both compounds have a carbonyl group, so the test cannot distinguish them.
b.
[3]

Write the equations for (i) the Clemmensen reduction of propanone, (ii) the addition of HCN to propanal, and (iii) the reduction of propanone with lithium aluminium hydride, naming each product.

Answer

(i) Zinc amalgam and concentrated HCl reduce C=O to CH₂:
CHX3COCHX3+4 [H]→Zn−Hg/conc. HClCHX3CHX2CHX3+HX2O \ce{CH3COCH3 + 4[H] ->[Zn-Hg/conc{.} HCl] CH3CH2CH3 + H2O}
The product is propane.

(ii)
CHX3CHX2CHO+HCN→CHX3CHX2CH(OH)CN \ce{CH3CH2CHO + HCN -> CH3CH2CH(OH)CN}
The product is 2-hydroxybutanenitrile (propanal cyanohydrin).

(iii)
CHX3COCHX3→HX2OLiAlHX4CHX3CH(OH)CHX3 \ce{CH3COCH3 ->[LiAlH4][H2O] CH3CH(OH)CH3}
The product is propan-2-ol.

Marking scheme
  • Clemmensen: propanone → propane.
  • HCN addition: propanal → 2-hydroxybutanenitrile.
  • LiAlH₄: propanone → propan-2-ol.
c.
[3]

Choose one test that gives a positive result with propanone but not with propanal, and one that gives a positive result with propanal but not propanone. Give the observation for each, and explain why propanal fails the first test.

Answer

Iodoform test (iodine and sodium hydroxide, warmed): propanone gives a yellow precipitate of iodoform, CHIX3 \ce{CHI3} ; propanal does not.

Tollens' test: propanal gives a silver mirror; propanone does not (or Fehling's: a red precipitate with propanal only).

The iodoform test needs a CHX3COX− \ce{CH3CO-} group (or CHX3CH(OH)X− \ce{CH3CH(OH)-} , which is oxidized to it). Propanone has one; in propanal the C=O carries an ethyl group and a hydrogen, CHX3CHX2−CHO \ce{CH3CH2-CHO} , so it has no methyl next to the carbonyl and gives no iodoform.

Marking scheme
  • Iodoform test: yellow precipitate with propanone only.
  • Tollens' (or Fehling's): silver mirror (red precipitate) with propanal only.
  • Iodoform needs a CH₃CO– group, which propanal lacks.

Your score

0 / 75

45 questions not marked yet

Physical Chemistry–Full marks 22
Inorganic Chemistry–Full marks 12
Organic Chemistry–Full marks 33
Applied Chemistry–Full marks 8

Marks lost, by unit

Mark a question to see your score here.

Found a mistake? Please tell us.

Score 0 of 0 0 of 45 marked Time left: 3:00:00