Skip to content

← Grade 12 Chemistry Model Papers

Grade 12 Chemistry Model Paper 3

Full marks: 75Time: 3 hours

Answer every question; where a question has an OR question, answer either one.

A full practice run of the NEB Grade 12 Chemistry paper (Che. 302): 75 marks in 3 hours, 12 questions in three groups. Group A is one question of 11 multiple-choice items, about 25 minutes; groups B and C have short- and long-answer questions of two to four parts, with each part's marks shown. Questions 2 and 6 in group B and Questions 10 and 12 in group C each have an OR question: answer either the question or its OR question, every part from the same one, and mark only the one you answered. Write on paper first, then tap your choice in group A and open each other part's answer to give yourself the marks its scheme allows. Where needed, take the atomic masses H = 1, C = 12, N = 14, O = 16, S = 32, K = 39, Cr = 52, Fe = 56, F=96,485 F = 96{,}485 C mol⁻¹ and R=8.314 R = 8.314 J K⁻¹ mol⁻¹.

A practice paper by Science Playground, made to CDC’s Specification Grid 2078, Grade 12 Chemistry (Che. 302). Not an official CDC or NEB paper; the real NEB Grade 12 exam may differ.

Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.

Paper to print (PDF, 5 pages) Answer key and marking scheme

Group AMultiple choice11 marks

Question 1

11 × 1 = 11

Choose the correct option for each of the following questions.

a.

How much water must be added to 200 mL of 0.5 N hydrochloric acid to make it 0.2 N?

Pick an answer to see why.

b.

A zero-order reaction has a rate constant of 0.02 mol L⁻¹ min⁻¹. If the starting concentration is 0.8 mol/L, what is its half-life?

Pick an answer to see why.

c.

The cell Ni ∣ NiX2+ ∣∣ CuX2+ ∣ Cu \ce{Ni | Ni^2+ || Cu^2+ | Cu} has Ecell∘=0.60 E^\circ_{\text{cell}} = 0.60 V. What is the standard free energy change of its reaction, Ni+CuX2+→NiX2++Cu \ce{Ni + Cu^2+ -> Ni^2+ + Cu} ?

Pick an answer to see why.

d.

Which of these is a Lewis acid but not a Brønsted–Lowry acid?

Pick an answer to see why.

e.

What is the chief ore of mercury?

Pick an answer to see why.

f.

Why are transition metals and their compounds good catalysts?

Pick an answer to see why.

g.

In the Hell–Volhard–Zelinsky reaction, a carboxylic acid with an α-hydrogen is treated with which reagents?

Pick an answer to see why.

h.

Ethanoic acid fizzes with sodium hydrogencarbonate solution, but phenol does not. Why?

Pick an answer to see why.

i.

Teflon (PTFE) is used to coat non-stick frying pans. Which property makes it suitable?

Pick an answer to see why.

j.

Cobalt-60 is used in hospitals to treat cancer. Which property of its radiation makes it useful?

Pick an answer to see why.

k.

Ordinary paper tears easily when wet, but a kitchen paper towel must soak up water and still hold together. Which treatment of the pulp would best give a towel this wet strength?

Pick an answer to see why.

Group BShort answers, each on one content area40 marks

Question 2

5 marks

Prashant studies the hydrogenation of ethene:
CHX2=CHX2(g)+HX2(g)→CHX3−CHX3(g) \ce{CH2=CH2(g) + H2(g) -> CH3-CH3(g)}
The same reaction on the C=C bonds of vegetable oils hardens them into vanaspati ghee. Average bond enthalpies (kJ mol⁻¹): C=C 612, H–H 436, C–C 347, C–H 413.

a.
[1]

Define bond enthalpy.

Answer

Bond enthalpy is the energy needed to break one mole of a particular bond in gaseous molecules into gaseous atoms (for bonds that occur in many compounds, an average over them).

Marking scheme
  • Energy needed to break one mole of a bond, in the gas phase (averaged over compounds).
b.
[2]

Calculate the enthalpy change of the reaction from the bond enthalpies.

Answer

Bonds broken: one C=C and one H–H (the four C–H bonds of ethene stay):
612+436=1048 kJ 612 + 436 = 1048 \text{ kJ}
Bonds made: one C–C and two new C–H bonds:
347+2×413=1173 kJ 347 + 2 \times 413 = 1173 \text{ kJ}
ΔH=∑(bonds broken)−∑(bonds formed)=1048−1173=−125 kJ mol−1 \Delta H = \sum(\text{bonds broken}) - \sum(\text{bonds formed}) = 1048 - 1173 = \mathbf{-125\ kJ\ mol^{-1}}

Marking scheme
  • Bonds broken 1048 kJ and bonds formed 1173 kJ (or all bonds counted on both sides).
  • ΔH = −125 kJ mol⁻¹.
c.
[2]

The value found from enthalpies of formation is −136 kJ mol⁻¹. Which of the two values is the more reliable for this reaction, and why does the value from bond enthalpies differ from it?

Answer

The value from enthalpies of formation, −136 kJ mol⁻¹, is the more reliable: those enthalpies are measured for ethene and ethane themselves, and Hess's law combines them exactly.

The value from bond enthalpies is only an estimate, because the bond enthalpies are averages over many compounds. The real bonds in these two molecules are not exactly average: a bond's strength depends on the rest of the molecule (a C–H bond on the sp² carbon of ethene is stronger than one in ethane), yet the calculation took the four C–H bonds of ethene as unchanged and the two new ones as average.

Marking scheme
  • The enthalpy-of-formation value is more reliable: measured for these very substances and combined exactly by Hess's law.
  • Bond enthalpies are averages over many compounds, while the real bonds in ethene and ethane differ from the average (e.g. ethene's C–H bonds taken as unchanged).

OR

Sneha reads that hydrogen–oxygen fuel cells powered the Apollo spacecraft and now run some buses. In the cell, hydrogen and oxygen react through potassium hydroxide solution between porous electrodes: 2 HX2(g)+OX2(g)→2 HX2O(l) \ce{2H2(g) + O2(g) -> 2H2O(l)} , Ecell∘=1.23 E^\circ_{\text{cell}} = 1.23 V.

a.
[1]

What is a fuel cell?

Answer

A fuel cell is a galvanic cell that turns the chemical energy of a fuel (such as hydrogen) and an oxidant (oxygen) directly into electrical energy, the reactants being supplied continuously from outside.

Marking scheme
  • A cell that converts the energy of a continuously supplied fuel and oxygen directly into electricity.
b.
[2]

Write the reactions at the anode and the cathode.

Answer

Anode (oxidation):
2 HX2(g)+4 OHX−(aq)→4 HX2O(l)+4 eX− \ce{2H2(g) + 4OH-(aq) -> 4H2O(l) + 4e-}

Cathode (reduction):
OX2(g)+2 HX2O(l)+4 eX−→4 OHX−(aq) \ce{O2(g) + 2H2O(l) + 4e- -> 4OH-(aq)}

Together they give 2 HX2+OX2→2 HX2O \ce{2H2 + O2 -> 2H2O} .

Marking scheme
  • Anode: 2 HX2+4 OHX−→4 HX2O+4 eX− \ce{2H2 + 4OH- -> 4H2O + 4e-} .
  • Cathode: OX2+2 HX2O+4 eX−→4 OHX− \ce{O2 + 2H2O + 4e- -> 4OH-} .
c.
[2]

Calculate the standard free energy change for each mole of hydrogen used, and explain why a fuel cell can turn more of the fuel's energy into useful work than an engine burning the same hydrogen.

Answer

For one mole of HX2 \ce{H2} , two electrons pass (n = 2):
ΔG∘=−nFE∘=−2×96,485×1.23≈−237 kJ mol−1 \Delta G^\circ = -nFE^\circ = -2 \times 96{,}485 \times 1.23 \approx \mathbf{-237\ kJ\ mol^{-1}}
ΔG is the most useful work a reaction can give. A fuel cell turns the reaction's free energy directly into electrical work, so most of it is used. An engine first turns the energy into heat, and a heat engine can convert only part of heat into work (the rest is lost to the exhaust and surroundings), so its efficiency is much lower.

Marking scheme
  • ΔG∘=−2×96,485×1.23≈−237 \Delta G^\circ = -2 \times 96{,}485 \times 1.23 \approx -237 kJ per mole of H₂.
  • The cell converts ΔG directly into electrical work; an engine goes through heat, of which only part can become work.

Question 3

5 marks

Nirjala learns that the sting of a red ant contains methanoic (formic) acid, HCOOH, a weak acid with Ka=1.8×10−4 K_a = 1.8 \times 10^{-4} at 25 °C.

a.
[1]

What is a conjugate acid–base pair? Give the pair formed when methanoic acid gives a proton to water.

Answer

A conjugate acid–base pair is an acid and the base it becomes by losing one proton (they differ by one HX+ \ce{H+} ). In
HCOOH+HX2O⇌HCOOX−+HX3OX+ \ce{HCOOH + H2O <=> HCOO- + H3O+}
HCOOH \ce{HCOOH} and HCOOX− \ce{HCOO-} are one pair (and HX3OX+ \ce{H3O+} and HX2O \ce{H2O} the other).

Marking scheme
  • A pair differing by one proton; HCOOH and HCOO⁻ (or H₃O⁺ and H₂O).
b.
[2]

Calculate the pH of a 0.10 M solution of methanoic acid.

Answer

For a weak acid, [HX+]=KaC [\ce{H+}] = \sqrt{K_aC} :
[HX+]=1.8×10−4×0.10=1.8×10−5=4.24×10−3 M [\ce{H+}] = \sqrt{1.8 \times 10^{-4} \times 0.10} = \sqrt{1.8 \times 10^{-5}} = 4.24 \times 10^{-3} \text{ M}
pH=−log⁡(4.24×10−3)=2.37 \text{pH} = -\log(4.24 \times 10^{-3}) = \mathbf{2.37}
(The degree of ionization is 4.2%, under 5%, so the shortcut holds; the exact quadratic gives 2.38.)

Marking scheme
  • [HX+]=KaC=4.24×10−3 [\ce{H+}] = \sqrt{K_aC} = 4.24 \times 10^{-3} M.
  • pH = 2.37 (2.38 by the quadratic also accepted).
c.
[2]

The solution is diluted 100 times, to 0.0010 M. Find the degree of ionization before and after diluting, and explain the change with Ostwald's dilution law.

Answer

At 0.10 M: α=Ka/C=1.8×10−4/0.10=0.042 \alpha = \sqrt{K_a/C} = \sqrt{1.8 \times 10^{-4}/0.10} = 0.042 , that is 4.2%.

At 0.0010 M the shortcut would give 0.18=0.42 \sqrt{0.18} = 0.42 , over 5%, so the full form is used: Ka=Cα21−α K_a = \dfrac{C\alpha^2}{1 - \alpha} , that is 0.0010α2+1.8×10−4α−1.8×10−4=0 0.0010\alpha^2 + 1.8 \times 10^{-4}\alpha - 1.8 \times 10^{-4} = 0 , giving α=0.34 \alpha = 0.34 , about 34%.

By Ostwald's dilution law, for a weak electrolyte α≈Ka/C \alpha \approx \sqrt{K_a/C} : as the concentration falls, the degree of ionization rises. On dilution the ions are farther apart and recombine less, so more of the acid ionizes, though the solution as a whole is less acidic.

Marking scheme
  • α = 4.2% at 0.10 M and about 34% at 0.0010 M (0.42 by the shortcut, accepted with a note that it overestimates).
  • Ostwald's law: α∝1/C \alpha \propto 1/\sqrt{C} ; dilution increases the degree of ionization.

Question 4

5 marks

Pasang's grandfather tells him about the old copper mines of the hills, where copper was smelted from yellow copper pyrites.

a.
[2]

Write the formula of copper pyrites and name the method by which this ore is concentrated.

Answer

Copper pyrites (chalcopyrite) is CuFeSX2 \ce{CuFeS2} . Being a sulphide ore, it is concentrated by the froth flotation process, in which the ore particles, wetted by pine oil, rise with the froth and the earthy gangue sinks.

Marking scheme
  • Formula CuFeS₂.
  • Froth flotation.
b.
[1]

During smelting, silica is added to the roasted ore. Why? Give the equation.

Answer

Roasting leaves much of the iron as iron(II) oxide (and FeS is turned into FeO in the furnace). Silica is a flux that combines with it to form a fusible slag, iron(II) silicate, which floats on the molten matte and is run off:
FeO+SiOX2→FeSiOX3 \ce{FeO + SiO2 -> FeSiO3}

Marking scheme
  • Silica removes iron as FeSiO₃ slag (equation).
c.
[2]

In the Bessemer converter no carbon is added, yet the matte (CuX2S \ce{Cu2S} ) gives copper metal. Write the equations for this self-reduction, and use oxidation numbers to show which element is reduced and which substance is the reducing agent.

Answer

Air blown through the molten matte oxidizes part of the copper(I) sulphide to copper(I) oxide, which then reacts with the rest of the sulphide:
2 CuX2S+3 OX2→2 CuX2O+2 SOX22 CuX2O+CuX2S→6 Cu+SOX2 \ce{2Cu2S + 3O2 -> 2Cu2O + 2SO2} \qquad \ce{2Cu2O + Cu2S -> 6Cu + SO2}
In the second reaction copper goes from +1 (in Cu₂O and Cu₂S) to 0: copper is reduced. Sulphur goes from −2 in Cu₂S to +4 in SO₂: it is oxidized, giving up the electrons the copper takes. So the reducing agent is the copper(I) sulphide itself (its sulphide ion), and no carbon is needed: the ore reduces itself.

Marking scheme
  • The two equations, part of Cu₂S oxidized to Cu₂O, which reacts with the rest of the Cu₂S.
  • Cu +1 → 0 (reduced); S −2 → +4 (oxidized), so Cu₂S (sulphide) is the reducing agent.

Question 5

5 marks

Copper sulphate solution turns deep blue when ammonia solution is added in excess, forming [Cu(NHX3)X4]SOX4 \ce{[Cu(NH3)4]SO4} .

a.
[2]

Write the IUPAC name of [Cu(NHX3)X4]SOX4 \ce{[Cu(NH3)4]SO4} and the coordination number of copper in it.

Answer

Tetraamminecopper(II) sulphate; the coordination number of copper is 4 (four ammonia ligands).

Marking scheme
  • Tetraamminecopper(II) sulphate.
  • Coordination number 4.
b.
[1]

Find the oxidation state of cobalt in [Co(NHX3)X5Cl]ClX2 \ce{[Co(NH3)5Cl]Cl2} .

Answer

Two chloride ions are outside the brackets, so the complex ion is [Co(NHX3)X5Cl]X2+ \ce{[Co(NH3)5Cl]^2+} . Ammonia is neutral and the chlorido ligand is −1: x+5(0)+(−1)=+2 x + 5(0) + (-1) = +2 , so x= x = +3.

Marking scheme
  • The complex ion is [Co(NH₃)₅Cl]²⁺; x + 0 − 1 = +2, so x = +3.
c.
[2]

Both [Ni(CN)X4]X2− \ce{[Ni(CN)4]^2-} and [NiClX4]X2− \ce{[NiCl4]^2-} contain nickel(II), 3d8 3d^8 , with four ligands, but the first is square planar and the second tetrahedral. Which of them is paramagnetic? Calculate its spin-only magnetic moment.

Answer

In [Ni(CN)X4]X2− \ce{[Ni(CN)4]^2-} the strong-field cyanide ligands make the eight d electrons pair up, leaving one d orbital empty for the square planar arrangement: no unpaired electrons, so it is diamagnetic.

In [NiClX4]X2− \ce{[NiCl4]^2-} the weak-field chloride ligands do not pair them, so, as in the free Ni²⁺ ion, two electrons are unpaired: it is paramagnetic.
μ=n(n+2)=2×4=8=2.83 BM \mu = \sqrt{n(n+2)} = \sqrt{2 \times 4} = \sqrt{8} = \mathbf{2.83\ BM}

Marking scheme
  • [NiCl₄]²⁻ (weak field, tetrahedral) has two unpaired electrons and is paramagnetic; [Ni(CN)₄]²⁻ (strong field) has all paired, diamagnetic.
  • μ=n(n+2)=8=2.83 \mu = \sqrt{n(n+2)} = \sqrt8 = 2.83 BM.

Question 6

5 marks

Milan treats bromoethane with alcoholic potassium cyanide in one flask and with silver cyanide in another.

a.
[1]

What is an ambident nucleophile? Give one example.

Answer

An ambident nucleophile is a nucleophile that can attack through two different atoms, because both carry a lone pair: for example the cyanide ion, CNX− \ce{CN-} , which has a lone pair on both its carbon and its nitrogen and can bond through either (or the nitrite ion, through nitrogen or oxygen).

Marking scheme
  • A nucleophile that can bond through two different atoms; e.g. CN⁻ (or NO₂⁻).
b.
[2]

Write the equations for the two reactions and name the organic products.

Answer

With potassium cyanide: propanenitrile (ethyl cyanide):
CX2HX5Br+KCN→alc ⋅ CX2HX5CN+KBr \ce{C2H5Br + KCN ->[alc.] C2H5CN + KBr}
With silver cyanide: ethyl isocyanide (ethyl carbylamine):
CX2HX5Br+AgCN→CX2HX5NC+AgBr \ce{C2H5Br + AgCN -> C2H5NC + AgBr}

Marking scheme
  • KCN: propanenitrile, C₂H₅CN.
  • AgCN: ethyl isocyanide, C₂H₅NC.
c.
[2]

Explain why the two cyanides give different products.

Answer

KCN is ionic, so it gives free CNX− \ce{CN-} ions in solution. The ion attacks through its carbon atom, the more nucleophilic end, and the stronger C–C bond is formed: a nitrile.

AgCN is largely covalent: the carbon of the cyanide is already bonded to silver (Ag–C≡N), so only the lone pair on nitrogen is free to attack the haloalkane, and an isocyanide (C–N bond) forms. Silver also helps pull off the bromide, as insoluble AgBr.

Marking scheme
  • KCN is ionic: free CN⁻ attacks through carbon, giving the nitrile.
  • AgCN is covalent (Ag–C bond): only the N lone pair is free, giving the isocyanide.

OR

Benzoic acid, as its salt sodium benzoate, is used to preserve fruit juices and sauces.

a.
[1]

Write the structural formula of benzoic acid, and the name of the reagent that turns toluene into it.

Answer

Benzoic acid is CX6HX5COOH \ce{C6H5COOH} (a carboxyl group on a benzene ring); toluene is oxidized to it by alkaline potassium permanganate (followed by acid).

Marking scheme
  • C₆H₅COOH, from toluene with alkaline KMnO₄ (then acid).
b.
[2]

Write the equations for (i) the preparation of benzoic acid from toluene and (ii) the heating of sodium benzoate with soda lime.

Answer

(i)
CX6HX5CHX3+3 [O]→HX3OX+alk. KMnOX4CX6HX5COOH+HX2O \ce{C6H5CH3 + 3[O] ->[alk{.} KMnO4][H3O+] C6H5COOH + H2O}

(ii)
CX6HX5COONa+NaOH→ΔCaOCX6HX6+NaX2COX3 \ce{C6H5COONa + NaOH ->[CaO][\Delta] C6H6 + Na2CO3}
The product is benzene (decarboxylation).

Marking scheme
  • Oxidation of toluene to benzoic acid.
  • Decarboxylation of sodium benzoate with soda lime to benzene.
c.
[2]

Benzoic acid is nitrated with difficulty, and gives 3-nitrobenzoic acid. Explain both the difficulty and the position.

Answer

The –COOH group withdraws electrons from the ring, by induction and by resonance (its C=O pulls the ring's π electrons), so the ring is deactivated: it reacts more slowly than benzene and needs concentrated acids and heat.

The withdrawal by resonance leaves positive charge at the ortho and para positions, so they are the most electron-poor, and the electrophile NOX2X+ \ce{NO2+} attacks the meta position, the least deactivated: 3-nitrobenzoic acid.

Marking scheme
  • –COOH withdraws electrons (−I, −R): the ring is deactivated, so nitration is difficult.
  • Ortho and para positions are most electron-poor, so substitution is at meta.

Question 7

5 marks

Isha's teacher nitrates benzene in a fume hood with a mixture of concentrated nitric and sulphuric acids, keeping the temperature below 60 °C.

a.
[1]

Chlorobenzene nitrated in the same way gives two main products. Write the IUPAC name of the major one.

Answer

1-Chloro-4-nitrobenzene (p-chloronitrobenzene), with 1-chloro-2-nitrobenzene as the minor product.

Marking scheme
  • 1-Chloro-4-nitrobenzene.
b.
[2]

Explain, with equations, the role of concentrated sulphuric acid in the nitrating mixture.

Answer

Sulphuric acid is the stronger acid: it protonates nitric acid, which then loses water to give the nitronium ion, NOX2X+ \ce{NO2+} , the electrophile that attacks the ring:
HNOX3+2 HX2SOX4⇌NOX2X++HX3OX++2 HSOX4X− \ce{HNO3 + 2H2SO4 <=> NO2+ + H3O+ + 2HSO4-}
CX6HX6+NOX2X+→CX6HX5NOX2+HX+ \ce{C6H6 + NO2+ -> C6H5NO2 + H+}
It also absorbs the water formed, which would otherwise slow the reaction.

Marking scheme
  • H₂SO₄ protonates HNO₃ to give the electrophile NO₂⁺ (equation).
  • NO₂⁺ substitutes on the ring (equation; H₂SO₄ also takes up the water).
c.
[2]

A nitroalkane X, CX4HX9NOX2 \ce{C4H9NO2} , does not dissolve in sodium hydroxide solution, while its isomer 1-nitrobutane does. Identify X and explain.

Answer

The –NO₂ group withdraws electrons so strongly that a hydrogen on the carbon next to it (an α-hydrogen) becomes weakly acidic: a base can remove it as HX+ \ce{H+} , and the nitroalkane dissolves in NaOH as a salt. 1-Nitrobutane, a primary nitroalkane, has two α-hydrogens, so it dissolves.

X does not dissolve, so it has no α-hydrogen: the carbon carrying –NO₂ is joined to three other carbons, a tertiary nitroalkane. With four carbons in all, the only one is 2-methyl-2-nitropropane, (CHX3)X3CNOX2 \ce{(CH3)3CNO2} .

Marking scheme
  • Nitroalkanes with an α-hydrogen dissolve in NaOH (the H next to –NO₂ is acidic); X has none, so it is tertiary.
  • X = 2-methyl-2-nitropropane, (CH₃)₃CNO₂, the only tertiary C₄H₉NO₂.

Question 8

5 marks

Kushal heats ethanol with concentrated sulphuric acid and gets a different product at each of two temperatures.

a.
[1]

Zeise's salt, one of the first organometallic compounds made, contains ethene bonded to platinum. Write its formula.

Answer

K[PtClX3(CX2HX4)] \ce{K[PtCl3(C2H4)]} (potassium trichlorido(ethene)platinate(II)), usually as its monohydrate.

Marking scheme
  • K[PtCl₃(C₂H₄)].
b.
[2]

Write the equations for heating ethanol with concentrated sulphuric acid (i) in excess at 140 °C (413 K) and (ii) at 170 °C (443 K), and name the products.

Answer

(i) Two molecules lose one water between them: ethoxyethane (diethyl ether):
2 CX2HX5OH→140 ∘Cconc. HX2SOX4CX2HX5OCX2HX5+HX2O \ce{2C2H5OH ->[conc{.} H2SO4][\pu{140 °C}] C2H5OC2H5 + H2O}
(ii) Each molecule loses water (elimination): ethene:
CX2HX5OH→170 ∘Cconc. HX2SOX4CHX2=CHX2+HX2O \ce{C2H5OH ->[conc{.} H2SO4][\pu{170 °C}] CH2=CH2 + H2O}

Marking scheme
  • At 140 °C with excess alcohol: ethoxyethane (equation).
  • At 170 °C: ethene (equation).
c.
[2]

Ethoxyethane (b.p. 35 °C) boils far lower than its isomer butan-1-ol (b.p. 117 °C), yet the two dissolve in water to about the same extent. Explain both facts.

Answer

An ether has no hydrogen on oxygen, so its molecules cannot hydrogen-bond to each other; only weak dipole and dispersion forces hold them, and it boils low. Butan-1-ol molecules are joined by O–H···O hydrogen bonds, which take much energy to break.

But the ether's oxygen has lone pairs, so it can accept hydrogen bonds from water molecules, as the alcohol can; so both dissolve to about the same small extent (about 6–8 g per 100 g of water).

Marking scheme
  • No H-bonding between ether molecules (no O–H), so low b.p.; butan-1-ol molecules are H-bonded.
  • The ether's O accepts H-bonds from water, so its solubility is similar to the alcohol's.

Question 9

5 marks

Suhana visits a cement plant in Dang, where limestone is quarried nearby, and reads about the plastics, medicines and isotopes used at a hospital in Nepalgunj.

a.
[1]

Name the two main raw materials of Portland cement.

Answer

Limestone (calcium carbonate, the source of lime) and clay or shale (the source of silica, alumina and iron oxide); gypsum is added only at the grinding stage.

Marking scheme
  • Limestone and clay (shale).
b.
[2]

Explain the difference between the dry and wet processes of making cement, and why almost every new plant uses the dry process.

Answer

In the dry process the raw materials are crushed, dried and ground to a fine powder (raw meal), which is preheated and fed into the kiln. In the wet process they are ground with water into a slurry, which is fed into the kiln.

In the wet process all that water must be evaporated in the kiln, which takes a great deal of fuel. The dry process saves this energy (and gives out less carbon dioxide), so it is cheaper and better for the environment.

Marking scheme
  • Dry: raw materials ground dry to a raw meal; wet: ground with water to a slurry.
  • The dry process needs far less fuel (no water to evaporate), so it is preferred.
c.
[1]

A hospital receives a sample of iodine-131, whose half-life is 8 days. What fraction of it is left after 24 days?

Answer

24 days is 24/8=3 24/8 = 3 half-lives, so (12)3= \left(\tfrac12\right)^3 = 1/8 (12.5%) is left.

Marking scheme
  • 3 half-lives, so 1/8 is left.
d.
[1]

A nylon-6,6 rope and a polythene sheet are both left for weeks in warm dilute acid. The rope slowly weakens, while the sheet is unchanged. Give the chemical reason.

Answer

Nylon-6,6 is a polyamide: its chain is held together by amide links, –CO–NH–, and an amide is hydrolyzed by acid (as ethanamide is), so the chains are slowly cut and the rope weakens. Polythene's chain has only C–C and C–H bonds, which dilute acid does not attack.

Marking scheme
  • Acid hydrolyzes nylon's amide (–CO–NH–) links and cuts its chains; polythene has only C–C and C–H bonds, which acid does not attack.

Group CLong answers, each on one content area24 marks

Question 10

8 marks

Ankit measures the initial rate of a reaction A+B→products \ce{A + B -> products} at 25 °C:

Experiment [A] (mol/L) [B] (mol/L) Initial rate (mol L⁻¹ s⁻¹)
1 0.10 0.10 2.0×10−3 2.0 \times 10^{-3}
2 0.20 0.10 8.0×10−3 8.0 \times 10^{-3}
3 0.10 0.20 4.0×10−3 4.0 \times 10^{-3}
a.
[3]

Explain, using collision theory, why only a small fraction of collisions lead to reaction, and why a rise of 10 °C often doubles the rate.

Answer

By collision theory, molecules must collide to react, but a collision is effective only if two conditions are met:

  1. The colliding molecules must have at least a minimum energy, the activation energy Ea E_a , enough to break the old bonds and reach the activated complex.
  2. They must collide in the right orientation, with the reacting atoms facing each other.

Most collisions fail one or both, so only a small fraction react. Raising the temperature by 10 °C increases the molecules' speed only a little (about 2%), but it greatly increases the fraction of molecules with energy above Ea E_a , the tail of the energy distribution, often about doubling it, so the rate roughly doubles.

Marking scheme
  • Effective collisions need energy at least equal to the activation energy.
  • And the proper orientation; so only a small fraction react.
  • A 10 °C rise greatly increases the fraction of molecules with energy above Eₐ (not just the number of collisions), so the rate about doubles.
b.
[3]

Find the order with respect to A and to B, write the rate law, and calculate the rate constant with its unit.

Answer

Experiments 1 and 2: [A] doubles, [B] fixed, rate rises 4 times = 22 2^2 : second order in A.

Experiments 1 and 3: [B] doubles, [A] fixed, rate doubles = 21 2^1 : first order in B.

Rate law: rate=k[A]2[B] \text{rate} = k[\ce{A}]^2[\ce{B}] , overall order 3. From experiment 1:
k=2.0×10−3(0.10)2(0.10)=2.0 L2 mol−2 s−1 k = \frac{2.0 \times 10^{-3}}{(0.10)^2(0.10)} = \mathbf{2.0\ L^2\ mol^{-2}\ s^{-1}}

Marking scheme
  • Second order in A (rate × 4 when [A] doubles).
  • First order in B; rate = k[A]²[B], overall third order.
  • k = 2.0 L² mol⁻² s⁻¹.
c.
[2]

A and B are both gases. By what factor does the rate change if (i) the volume of the vessel is suddenly halved at the same temperature, and (ii) instead, argon is pumped in at the same volume and temperature until the total pressure is doubled? Explain.

Answer

(i) Halving the volume doubles the concentration of each gas (the same number of moles in half the volume):
new rate=k(2[A])2(2[B])=8k[A]2[B] \text{new rate} = k(2[\ce{A}])^2(2[\ce{B}]) = 8k[\ce{A}]^2[\ce{B}]
The rate becomes 8 times as fast, because the reaction is third order overall (23=8 2^3 = 8 ).

(ii) The rate does not change. The rate law depends on the concentrations of A and B, and at the same volume their moles per liter are unchanged; the argon raises the total pressure but takes no part in the reaction.

Marking scheme
  • Halving the volume doubles both concentrations: rate × 2² × 2 = 8 times (third order).
  • Argon at the same volume leaves [A] and [B] unchanged, so the rate is unchanged.

OR

Sapana standardizes a potassium dichromate solution. She dissolves 3.92 g of Mohr's salt, (NHX4)X2Fe(SOX4)X2 ⋅ 6 HX2O \ce{(NH4)2Fe(SO4)2.6H2O} (M = 392), in dilute sulphuric acid and makes it up to 250 mL. 25.0 mL of this solution needs 20.0 mL of the dichromate solution, with diphenylamine as indicator.

a.
[3]

Why is Mohr's salt chosen as the primary standard rather than iron(II) sulphate crystals, why is the solution made in dilute sulphuric acid, and why is an indicator needed here though none is needed with potassium permanganate?

Answer
  • Mohr's salt is stable in air, does not lose water of crystallization and is not easily oxidized, so it can be weighed pure. Iron(II) sulphate crystals, FeSOX4 ⋅ 7 HX2O \ce{FeSO4.7H2O} , slowly lose water and are oxidized by air to iron(III), so their exact mass of iron(II) is unknown.
  • Dilute sulphuric acid stops the iron(II) salt from hydrolyzing and being oxidized by air, and supplies the HX+ \ce{H+} ions the dichromate reaction needs.
  • Dichromate is orange and its product, CrX3+ \ce{Cr^3+} , green: the change is not sharp enough to see the end point, so an indicator (diphenylamine, which turns violet-blue with the first excess of dichromate) is used. Permanganate is a self-indicator, purple to colorless.
Marking scheme
  • Mohr's salt is stable and not oxidized by air (FeSO₄·7H₂O is efflorescent and oxidized), so it is a primary standard.
  • Dilute H₂SO₄ prevents hydrolysis and air oxidation of Fe²⁺ and supplies H⁺.
  • Dichromate (orange to green) is not a self-indicator, so diphenylamine is needed.
b.
[3]

Calculate the normality of the Mohr's salt solution, the normality of the dichromate solution and its strength in grams per liter (KX2CrX2OX7 \ce{K2Cr2O7} , M = 294).

Answer

Mohr's salt gives one electron (Fe²⁺ → Fe³⁺), so its equivalent weight is 392:
N1=3.92392×0.250=0.040 N N_1 = \frac{3.92}{392 \times 0.250} = 0.040 \text{ N}
N2=N1V1V2=0.040×25.020.0=0.050 N N_2 = \frac{N_1V_1}{V_2} = \frac{0.040 \times 25.0}{20.0} = 0.050 \text{ N}
Dichromate takes six electrons (2 Cr: +6 → +3), so E = 294/6 = 49, and strength = 0.050×49= 0.050 \times 49 = 2.45 g/L.

Marking scheme
  • N(Mohr's salt) = 0.040 N (E = 392).
  • N(dichromate) = 0.050 N.
  • E(K₂Cr₂O₇) = 49, strength = 2.45 g/L.
c.
[2]

Write the balanced ionic equation for the titration. Her partner made the Mohr's salt solution in plain water and left it in an open flask for a week before titrating it. Would the normality of the dichromate they found be too high or too low? Explain.

Answer

CrX2OX7X2−+6 FeX2++14 HX+→2 CrX3++6 FeX3++7 HX2O \ce{Cr2O7^2- + 6Fe^2+ + 14H+ -> 2Cr^3+ + 6Fe^3+ + 7H2O}
Too high. Standing in air without acid, some of the Fe²⁺ is oxidized to Fe³⁺, which dichromate does not react with. So 25.0 mL of the solution holds less Fe²⁺ than the 0.040 N it was made to, less dichromate is needed to reach the end point, and the calculation N2=N1V1/V2 N_2 = N_1V_1/V_2 , still using 0.040 N, divides by a smaller V2 V_2 .

Marking scheme
  • The balanced ionic equation.
  • Too high: air oxidizes some Fe²⁺ to Fe³⁺, so less dichromate is used (smaller V₂) while N₁ is still taken as 0.040 N.

Question 11

8 marks

Rakshya's laboratory has a mixture of the three ethylamines made by heating bromoethane with ammonia.

a.
[3]

Explain how Hofmann's method separates the primary, secondary and tertiary amines of such a mixture.

Answer

The mixture is treated with diethyl oxalate, (COOCX2HX5)X2 \ce{(COOC2H5)2} ; each amine reacts according to how many hydrogens its nitrogen carries.

  • The primary amine (two H on N) reacts with both ester groups and gives a solid dialkyloxamide, (CONHCX2HX5)X2 \ce{(CONHC2H5)2} .
  • The secondary amine (one H) reacts with one ester group only and gives a liquid oxamic ester, (CX2HX5)X2NCOCOOCX2HX5 \ce{(C2H5)2NCOCOOC2H5} .
  • The tertiary amine (no H on N) does not react.

The tertiary amine is distilled off, the solid is filtered from the liquid, and each product is boiled with KOH to give back its amine.

Marking scheme
  • Primary amine gives a solid dialkyloxamide with diethyl oxalate.
  • Secondary amine gives a liquid oxamic ester.
  • Tertiary amine does not react and is distilled off; KOH regenerates the amines from the products.
b.
[2]

Write the equations for preparing ethanamine (i) by reducing ethanenitrile and (ii) from bromoethane and ammonia.

Answer

(i) With sodium and ethanol (Mendius reduction) or LiAlH₄:
CHX3CN+4 [H]→Na/CX2HX5OHCHX3CHX2NHX2 \ce{CH3CN + 4[H] ->[Na/C2H5OH] CH3CH2NH2}
(ii) Ammonolysis, in a sealed tube with excess ammonia:
CX2HX5Br+NHX3→CX2HX5NHX2+HBr \ce{C2H5Br + NH3 -> C2H5NH2 + HBr}
(The HBr forms ammonium bromide with the excess ammonia; some secondary and tertiary amines form too.)

Marking scheme
  • Reduction of ethanenitrile to ethanamine.
  • Ammonolysis of bromoethane to ethanamine.
c.
[3]

An amine X, CX3HX9N \ce{C3H9N} , gives a yellow oily liquid that does not dissolve, and no gas, with cold nitrous acid. Identify X, and write the equation for the reaction.

Answer

A yellow oil (an N-nitrosamine) and no nitrogen gas: X is a secondary amine, with two carbon groups on its nitrogen. Three carbons can be shared between two groups only as one methyl and one ethyl, so X is N-methylethanamine, CHX3NHCX2HX5 \ce{CH3NHC2H5} . (The other amines of formula C₃H₉N are primary, propan-1-amine and propan-2-amine, which give nitrogen gas, or tertiary, N,N-dimethylmethanamine, which gives no oil.)
CHX3NHCX2HX5+HNOX2→CHX3N(NO)CX2HX5+HX2O \ce{CH3NHC2H5 + HNO2 -> CH3N(NO)C2H5 + H2O}
The product is N-methyl-N-nitrosoethanamine.

Marking scheme
  • A yellow oily nitrosamine without N₂ shows a secondary amine.
  • X = N-methylethanamine, CH₃NHC₂H₅ (the only secondary amine C₃H₉N).
  • The equation forming the N-nitrosamine.

Question 12

8 marks

Nima compares aromatic carbonyl compounds made from toluene and benzene.

a.
[2]

The C=O group adds nucleophiles, while the C=C group of an alkene adds electrophiles. Explain the difference.

Answer

Oxygen is much more electronegative than carbon, so the C=O bond is polar: CXδ+=OXδ− \ce{C^{\delta+}=O^{\delta-}} . The electron-poor carbon is attacked by nucleophiles (and the oxygen then takes up H⁺).

The C=C bond of an alkene is non-polar, with an electron-rich π cloud between the carbons, so it attracts electrophiles.

Marking scheme
  • C=O is polar (Cδ+), so nucleophiles attack the carbon.
  • C=C is non-polar and electron-rich (π cloud), so electrophiles attack it.
b.
[3]

Write the equations for (i) preparing benzaldehyde from toluene by the Étard reaction, (ii) preparing benzaldehyde from benzoyl chloride by the Rosenmund reduction, and (iii) the benzoin condensation of benzaldehyde.

Answer

(i)
CX6HX5CHX3→HX2OCrOX2ClX2/CSX2CX6HX5CHO \ce{C6H5CH3 ->[CrO2Cl2/CS2][H2O] C6H5CHO}
(chromyl chloride in carbon disulphide, then water)

(ii)
CX6HX5COCl+HX2→Pd/BaSOX4CX6HX5CHO+HCl \ce{C6H5COCl + H2 ->[Pd/BaSO4] C6H5CHO + HCl}
(palladium on barium sulphate, partly poisoned so that the aldehyde is not reduced further)

(iii)
2 CX6HX5CHO→ethanolKCNCX6HX5CH(OH)COCX6HX5 \ce{2C6H5CHO ->[KCN][ethanol] C6H5CH(OH)COC6H5}
(benzoin)

Marking scheme
  • Étard reaction: toluene → benzaldehyde with CrO₂Cl₂.
  • Rosenmund reduction: C₆H₅COCl + H₂ (Pd/BaSO₄) → benzaldehyde.
  • Benzoin condensation: 2 C₆H₅CHO with KCN → benzoin.
c.
[3]

A compound P, CX8HX8O \ce{C8H8O} , gives an orange precipitate with 2,4-dinitrophenylhydrazine and a yellow precipitate with iodine and sodium hydroxide, but no silver mirror with Tollens' reagent. On vigorous oxidation it gives benzoic acid. Identify P and explain each observation.

Answer

P is acetophenone (1-phenylethan-1-one), CX6HX5COCHX3 \ce{C6H5COCH3} .

  • The 2,4-DNP precipitate shows a C=O group; no silver mirror shows it is a ketone, not an aldehyde.
  • The iodoform test shows a CHX3COX− \ce{CH3CO-} group:
    CX6HX5COCHX3+3 IX2+4 NaOH→CX6HX5COONa+CHIX3↓+3 NaI+3 HX2O \ce{C6H5COCH3 + 3I2 + 4NaOH -> C6H5COONa + CHI3 v + 3NaI + 3H2O}
  • Oxidation to benzoic acid shows a benzene ring with a single side chain; with eight carbons, the side chain is −COCHX3 \ce{-COCH3} .
Marking scheme
  • C=O present (2,4-DNP) and ketone (no Tollens' mirror).
  • CH₃CO– group (iodoform test, equation or explanation).
  • Monosubstituted benzene ring (benzoic acid on oxidation): P = acetophenone, C₆H₅COCH₃.

OR

Sangam compares the acid strengths of ethanoic acid and its halogenated derivatives.

a.
[2]

The C=O group of a carboxylic acid does not give the addition reactions of aldehydes and ketones (it gives no 2,4-DNP precipitate, for example). Explain.

Answer

In the carboxyl group a lone pair of the –OH oxygen is delocalized onto the C=O by resonance (in one form the carbonyl oxygen carries a negative charge and the –OH oxygen a positive one, joined to the carbon by a double bond). This makes the carbonyl carbon much less positive and gives the C=O partial single-bond character, so nucleophiles such as 2,4-DNP do not add to it as they do to an aldehyde or ketone.

Marking scheme
  • Resonance of the –OH lone pair with C=O in the carboxyl group.
  • The carbonyl carbon is less electrophilic, so typical carbonyl addition does not occur.
b.
[3]

Write the equations for the reactions of ethanoic acid with (i) sodium hydrogencarbonate and (ii) thionyl chloride, and (iii) for heating sodium ethanoate with soda lime.

Answer

(i)
CHX3COOH+NaHCOX3→CHX3COONa+HX2O+COX2↑ \ce{CH3COOH + NaHCO3 -> CH3COONa + H2O + CO2 ^}

(ii)
CHX3COOH+SOClX2→CHX3COCl+SOX2↑+HCl↑ \ce{CH3COOH + SOCl2 -> CH3COCl + SO2 ^ + HCl ^}

(iii)
CHX3COONa+NaOH→ΔCaOCHX4+NaX2COX3 \ce{CH3COONa + NaOH ->[CaO][\Delta] CH4 + Na2CO3}

Marking scheme
  • With NaHCO₃: sodium ethanoate, water and CO₂.
  • With SOCl₂: ethanoyl chloride, SO₂ and HCl.
  • With soda lime: methane and Na₂CO₃.
c.
[3]

Arrange CHX3COOH \ce{CH3COOH} , CHX3CHX2COOH \ce{CH3CH2COOH} , ClCHX2COOH \ce{ClCH2COOH} and FCHX2COOH \ce{FCH2COOH} in increasing order of acid strength, and explain the order.

Answer

CHX3CHX2COOH<CHX3COOH<ClCHX2COOH<FCHX2COOH \ce{CH3CH2COOH} < \ce{CH3COOH} < \ce{ClCH2COOH} < \ce{FCH2COOH}
An acid is stronger the more stable its anion, RCOOX− \ce{RCOO-} . A halogen on the α-carbon withdraws electrons through the σ bonds (−I effect), spreading the negative charge and stabilizing the anion, so the halogenated acids are the strongest. Fluorine is more electronegative than chlorine, so its pull is stronger and fluoroethanoic acid is the strongest of the four (pKₐ about 2.6, against 2.9 for chloroethanoic acid).

Alkyl groups push electrons (+I effect), adding to the negative charge and destabilizing the anion. An ethyl group pushes a little more than a methyl group, so propanoic acid (4.87) is weaker than ethanoic acid (4.76).

Marking scheme
  • The order CH₃CH₂COOH < CH₃COOH < ClCH₂COOH < FCH₂COOH.
  • −I effect of the halogen stabilizes the carboxylate; F is more electronegative than Cl, so fluoroethanoic acid is strongest.
  • +I effect of alkyl groups destabilizes it, ethyl more than methyl, so propanoic acid is weakest.

Your score

0 / 75

45 questions not marked yet

Physical Chemistry–Full marks 22
Inorganic Chemistry–Full marks 12
Organic Chemistry–Full marks 33
Applied Chemistry–Full marks 8

Marks lost, by unit

Mark a question to see your score here.

Found a mistake? Please tell us.

Score 0 of 0 0 of 45 marked Time left: 3:00:00