← Grade 12 Chemistry Model Papers
Grade 12 Chemistry Model Paper 1
Full marks: 75Time: 3 hours
Answer every question; where a question has an OR question, answer either one.
A full practice run of the NEB Grade 12 Chemistry paper (Che. 302): 75 marks in 3 hours, 12 questions in three groups. Group A is one question of 11 multiple-choice items, about 25 minutes; groups B and C have short- and long-answer questions of two to four parts, with each part's marks shown. Questions 2 and 6 in group B and Questions 10 and 12 in group C each have an OR question: answer either the question or its OR question, every part from the same one, and mark only the one you answered. Write on paper first, then tap your choice in group A and open each other part's answer to give yourself the marks its scheme allows. Where needed, take the atomic masses H = 1, C = 12, N = 14, O = 16, Na = 23, Ca = 40, K = 39, Mn = 55, Cr = 52, J K⁻¹ mol⁻¹, C mol⁻¹ and V at 25 °C.
A practice paper by Science Playground, made to CDC’s Specification Grid 2078, Grade 12 Chemistry (Che. 302). Not an official CDC or NEB paper; the real NEB Grade 12 exam may differ.
Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.
Paper to print (PDF, 5 pages) Answer key and marking scheme
Group AMultiple choice11 marks
Question 1
11 × 1 = 11Choose the correct option for each of the following questions.
Potassium dichromate (M = 294) is used as an oxidizing agent in acidic medium, where is reduced to . What is its equivalent weight in this reaction?
Pick an answer to see why.
What is the pH of a 0.005 M solution of barium hydroxide, , at 25 °C? (Take it as fully ionized.)
Pick an answer to see why.
The half-life of a first-order reaction is 20 minutes. What percentage of the reactant is left after one hour?
Pick an answer to see why.
In a Daniell cell, , which of these happens while the cell gives a current?
Pick an answer to see why.
Which of these ions is colorless in aqueous solution?
Pick an answer to see why.
In the cyanide process for silver, zinc dust is added to the solution of sodium dicyanidoargentate(I), . Why?
Pick an answer to see why.
What is formed when a mixture of chlorobenzene and chloromethane is heated with sodium in dry ether?
Pick an answer to see why.
In Williamson's synthesis of an ether, a tertiary haloalkane is not used with sodium ethoxide. Why?
Pick an answer to see why.
The fishing net of a fisherman at Phewa Lake is made of nylon-6,6. Which statement about this polymer is correct?
Pick an answer to see why.
Rosin and alum are added to the pulp when writing paper is made. What is their main purpose?
Pick an answer to see why.
Charcoal from an old hearth near Lo Manthang shows 25% of the carbon-14 activity of living wood, so the laboratory reports an age of about 11,460 years (two half-lives of 5,730 years). Later it is found that roots of living plants had grown into the charcoal before it was dug up. What does this mean for the age?
Pick an answer to see why.
Group BShort answers, each on one content area40 marks
Question 2
5 marksA lime kiln near the cement plant in Udayapur turns limestone into quicklime:
Standard values at 25 °C:
| Substance | (kJ mol⁻¹) | (J K⁻¹ mol⁻¹) |
|---|---|---|
| CaCO₃(s) | −1207.6 | 91.7 |
| CaO(s) | −634.9 | 38.1 |
| CO₂(g) | −393.5 | 213.8 |
State the second law of thermodynamics in terms of entropy.
Answer
In any spontaneous process the total entropy of the universe (the system and its surroundings together) increases: .
Marking scheme
- The entropy of the universe increases in every spontaneous process ().
Calculate the standard enthalpy change of the reaction.
Answer
The reaction is endothermic: the kiln has to supply heat.
Marking scheme
- with the values.
- kJ mol⁻¹.
Find and at 25 °C, and use them to explain why limestone has to be heated strongly before it breaks up. Above about what temperature does the reaction become spontaneous?
Answer
is positive at 25 °C, so limestone does not break up on its own at room temperature. Because is positive (a gas is formed), grows as T rises, and becomes negative above
That is why the kiln is run at about 900 °C or more.
Marking scheme
- J K⁻¹ mol⁻¹ and kJ mol⁻¹ at 25 °C: positive, so not spontaneous at room temperature.
- above K (about 846 °C), so strong heating is needed.
OR
Hydrogen peroxide decomposes by first-order kinetics on a manganese(IV) oxide catalyst:
In an experiment, its concentration falls from 0.80 mol/L to 0.20 mol/L in 30 minutes.
Define the order of a reaction.
Answer
The order of a reaction is the sum of the powers to which the concentrations of the reactants are raised in the experimentally found rate law. For rate , the order is .
Marking scheme
- The sum of the powers of the concentration terms in the experimental rate law.
Calculate the rate constant and the half-life of the reaction.
Answer
For a first-order reaction,
(The concentration has halved twice, 0.80 → 0.40 → 0.20, in 30 minutes: two half-lives of 15 minutes.)
Marking scheme
- min⁻¹.
- min.
When the same experiment is repeated at 35 °C instead of 25 °C, the rate constant doubles. Calculate the activation energy of the reaction, and explain how a 10 °C rise, which raises the average kinetic energy of the molecules by only about 3%, can double the rate.
Answer
From the Arrhenius equation,
with , K, K:
Only collisions with energy or more react, and they are a small fraction of all collisions, , in the far tail of the energy distribution. A small rise in temperature makes that tail much larger: here the fraction with at least 52.9 kJ mol⁻¹ doubles, although the average energy (proportional to T, 308/298) rises by only 3%.
Marking scheme
- The Arrhenius equation in two-temperature form with , 298 K and 308 K, giving kJ mol⁻¹.
- The fraction of collisions with energy ≥ () doubles, though the average energy rises only slightly.
Question 3
5 marksPragya prepares a standard solution of oxalic acid in her school laboratory in Pokhara by dissolving 0.63 g of oxalic acid crystals, (M = 126), in water and making it up to 100 mL. She then titrates 20.0 mL of it, warmed to about 60 °C with dilute sulphuric acid, against a potassium permanganate solution from a burette. The first lasting pale pink color appears when 25.0 mL has been added.
What is a standard solution?
Answer
A standard solution is a solution whose concentration (strength) is known exactly, made by dissolving a known mass of a primary standard substance in a known volume of solution, or found by titration against one.
Marking scheme
- A solution of exactly known concentration.
Calculate the normality of the oxalic acid solution.
Answer
Oxalic acid is dibasic (and in this reaction each molecule gives 2 electrons), so its equivalent weight is .
Marking scheme
- Equivalent weight of the crystals = 126/2 = 63.
- N.
Find the normality of the permanganate solution and its strength in grams per liter. Her partner says dilute hydrochloric acid would have done as well as sulphuric acid. Had they used it, would the normality of the permanganate found have been too high, too low or the same? Give a reason.
Answer
By the normality equation, :
In acid, , so strength = 2.53 g/L.
With hydrochloric acid the result would be too low. Permanganate oxidizes chloride ions to chlorine as well as oxidizing the oxalic acid, so more than 25.0 mL would be run in before the pink color lasts. A larger in gives a smaller normality than the true one.
Marking scheme
- N and strength = 0.08 × 31.6 = 2.53 g/L.
- Too low: KMnO₄ also oxidizes Cl⁻ to Cl₂, so a larger volume is used and comes out smaller.
Question 4
5 marksDolma has two iron(III) complexes in her laboratory: the pale violet hexaaquairon(III) ion, , and the red hexacyanidoferrate(III) ion, .
Define a ligand and the coordination number of a complex, using as the example.
Answer
A ligand is an ion or molecule with a lone pair of electrons that it gives to the central metal atom or ion to form a coordinate bond; in the ligands are the six cyanide ions, .
The coordination number is the number of coordinate bonds the ligands form with the central metal ion; in it is 6.
Marking scheme
- Ligand: a species that donates a lone pair to the central metal ion (here ).
- Coordination number: the number of coordinate bonds to the central ion (here 6).
Why are most complexes of transition metal ions colored?
Answer
In a complex, the ligands split the metal ion's d orbitals into two sets of slightly different energy. If the d orbitals are partly filled, an electron can absorb visible light of just the energy of the gap, , and jump to the higher set (a d–d transition). The light that is not absorbed reaches our eyes, so we see the complementary color.
Marking scheme
- Partly filled d orbitals split by the ligands; a d–d transition absorbs part of the visible light, and the complementary color is seen.
Fe³⁺ is . Using crystal field theory, show how the five d electrons are arranged in each complex, given that is a weak-field and a strong-field ligand, and predict the number of unpaired electrons in each.
Answer
In an octahedral field the d orbitals split into a lower set (three orbitals) and an upper set (two), apart.
- : water is a weak-field ligand, so is smaller than the pairing energy P. The electrons fill singly first: , high spin, with 5 unpaired electrons (strongly paramagnetic).
- : cyanide is a strong-field ligand, , so all five electrons pair up in the lower set: , low spin, with 1 unpaired electron (weakly paramagnetic).
Marking scheme
- : weak field, , high spin, 5 unpaired electrons.
- : strong field, , low spin, 1 unpaired electron.
Question 5
5 marksThe corrugated roofs (jasta) of many village houses are galvanized iron. Galvanizing uses about half of all the zinc the world produces.
Name the chief ore of zinc and write the equation for its roasting.
Answer
The chief ore is zinc blende, ZnS. After concentration by froth flotation it is roasted in excess air:
Marking scheme
- Zinc blende, ZnS.
- , balanced.
Write the equation for the reduction of the roasted ore to zinc, with its condition.
Answer
Zinc oxide is mixed with coke and heated to about 1400 °C in a retort; the zinc distils off as vapor and is condensed:
Marking scheme
- with coke at about 1400 °C.
A nail scratches a galvanized roof down to the iron. Explain why the iron at the scratch still does not rust for a long time. ( V, V)
Answer
Zinc has the more negative reduction potential, so it is more easily oxidized than iron. Where the iron is exposed and wet, the zinc and iron form a small cell in which zinc is the anode and is oxidized (), while the iron is the cathode and receives the electrons, so it is not oxidized. The zinc corrodes in place of the iron: sacrificial (cathodic) protection, which lasts as long as zinc remains near the scratch.
Marking scheme
- Zinc (−0.76 V) is more easily oxidized than iron (−0.45 V), so zinc becomes the anode.
- Zinc corrodes instead of the iron, which is the cathode and is protected (sacrificial protection).
Question 6
5 marksTwo isomers of are on a shelf: 1-bromobutane, , and .
Write the IUPAC name of and say whether it is a primary, secondary or tertiary haloalkane.
Answer
2-Bromo-2-methylpropane (tert-butyl bromide). The carbon carrying the bromine is joined to three other carbons, so it is a tertiary haloalkane.
Marking scheme
- 2-Bromo-2-methylpropane, tertiary.
1-Bromobutane is boiled with aqueous potassium hydroxide, and the product is then heated with excess acidified potassium dichromate. Write the equations for the two steps and name the products.
Answer
Hydrolysis gives a primary alcohol, butan-1-ol:
A primary alcohol is oxidized first to an aldehyde and, with excess oxidizing agent, to the carboxylic acid, butanoic acid:
Marking scheme
- Hydrolysis to butan-1-ol, equation.
- Oxidation (through butanal) to butanoic acid, equation.
is hydrolyzed by water much faster than 1-bromobutane, and doubling the concentration of does not change its rate. Explain both facts.
Answer
reacts by the SN1 mechanism. Its slow step is the ionization of the C–Br bond to a tertiary carbocation, , which is stabilized by the three electron-donating methyl groups (and its crowded carbon is hard for a nucleophile to reach from behind). The nucleophile joins only in the fast second step.
So the rate depends only on the haloalkane: rate , a first-order reaction, and adding more does not change it. 1-Bromobutane would give an unstable primary carbocation, so it reacts by the slower SN2 path instead.
Marking scheme
- SN1: the slow step is ionization to a stable tertiary carbocation (stabilized by three methyl groups), which a primary haloalkane cannot form.
- The nucleophile is not in the slow step, so rate = k[RBr], independent of [OH⁻].
OR
Anisole, a sweet-smelling liquid used in perfumes, is an aromatic ether.
Write the IUPAC name and the formula of anisole.
Answer
Anisole is methoxybenzene, .
Marking scheme
- Methoxybenzene, C₆H₅OCH₃.
Write the equation for preparing anisole by Williamson's synthesis, and the equation for its bromination in ethanoic acid, naming the main product.
Answer
Sodium phenoxide and iodomethane (or bromomethane):
The –OCH₃ group activates the ring, so bromine in ethanoic acid substitutes it without a catalyst, mainly at the para position, giving 4-bromoanisole (1-bromo-4-methoxybenzene), with some 2-bromoanisole:
Marking scheme
- Williamson's synthesis from sodium phenoxide and iodomethane:
- Bromination to 4-bromoanisole (main product), with HBr.
Another aryl alkyl ether, Z, , is heated with concentrated hydroiodic acid. One product gives a violet color with neutral iron(III) chloride; the other is an iodoalkane with two carbon atoms. Identify Z, write the equation, and explain why the iodine joins the alkyl group and not the ring.
Answer
The violet color shows phenol, and the iodoalkane is iodoethane, so Z has a phenyl and an ethyl group on its oxygen: Z is ethoxybenzene, (C₈H₁₀O).
HI first protonates the ether's oxygen, and the iodide ion then attacks a carbon next to the oxygen by SN2: the ethyl carbon, which can be reached from behind, so that C–O bond breaks. The bond between oxygen and the ring has partial double-bond character (a lone pair of the oxygen is delocalized into the ring), and an sp² ring carbon cannot be attacked from behind, so no iodobenzene forms.
Marking scheme
- Z is ethoxybenzene, C₆H₅OC₂H₅ (phenol from the FeCl₃ test, two-carbon iodoalkane), with the equation.
- I⁻ attacks the ethyl carbon (SN2); the ring C–O bond, partly double by resonance, with an sp² carbon, is not broken.
Question 7
5 marksBishal tests a sample of phenol and compares it with nitrobenzene.
What is seen when a few drops of neutral iron(III) chloride solution are added to an aqueous solution of phenol?
Answer
A violet color appears, from a complex of iron(III) with phenoxide.
Marking scheme
- A violet color.
Phenol is a stronger acid than ethanol. Explain why.
Answer
When phenol loses , the negative charge of the phenoxide ion is spread over the oxygen and the ortho and para carbons of the ring by resonance, which stabilizes the ion, so phenol ionizes to a small extent ().
In the ethoxide ion the charge stays on the oxygen, and the electron-donating ethyl group even pushes more electron density onto it, so the ion is less stable and ethanol hardly ionizes at all.
Marking scheme
- Phenoxide ion is stabilized by resonance (charge delocalized into the ring).
- Ethoxide has no resonance, and the +I ethyl group destabilizes it further, so ethanol is the weaker acid.
Phenol is nitrated by dilute nitric acid at room temperature, giving 2-nitrophenol and 4-nitrophenol. Nitrobenzene needs fuming nitric acid and concentrated sulphuric acid at about 100 °C, and gives 1,3-dinitrobenzene. Explain the difference in conditions and in the positions taken.
Answer
The –OH group of phenol gives electrons to the ring by resonance, so the ring is activated (attacked easily, under mild conditions), and the extra electron density is at the ortho and para positions, so it is an ortho/para director.
The –NO₂ group of nitrobenzene withdraws electrons from the ring by resonance and induction, so the ring is deactivated (attacked only under harsh conditions), and the ortho and para positions are made the most electron-poor, so the new group goes to the meta position.
Marking scheme
- –OH donates electrons: ring activated, mild conditions, ortho and para products.
- –NO₂ withdraws electrons: ring deactivated, harsh conditions, meta product.
Question 8
5 marksGrignard reagents and amines are both used to build new carbon chains and nitrogen compounds in the laboratory.
What is a Grignard reagent? Give its general formula.
Answer
A Grignard reagent is an alkylmagnesium (or arylmagnesium) halide, made by treating a haloalkane with magnesium in dry ether: general formula RMgX, for example .
Marking scheme
- An alkyl or aryl magnesium halide, RMgX.
Write the equations for the reaction of methylmagnesium bromide with (i) methanal and (ii) carbon dioxide, each followed by hydrolysis with dilute acid, and name the products.
Answer
(i) With methanal, a primary alcohol with one more carbon, ethanol:
(ii) With carbon dioxide (dry ice), a carboxylic acid, ethanoic acid:
Marking scheme
- With methanal: ethanol, equation.
- With CO₂: ethanoic acid, equation.
An amine Y, , gives no foul smell when warmed with chloroform and alcoholic potassium hydroxide. Identify Y, giving your reason, and write the equation for the reaction its isomer gives in the same test.
Answer
The test is the carbylamine (isocyanide) test, which only a primary amine gives. Two amines have the formula : ethanamine, (primary), and N-methylmethanamine, (secondary). Y gives no isocyanide, so Y is N-methylmethanamine. Its isomer, ethanamine, gives the foul-smelling ethyl isocyanide:
Marking scheme
- Only primary amines give the carbylamine test; of the two C₂H₇N amines, Y is the secondary one, N-methylmethanamine, (CH₃)₂NH.
- The balanced equation for ethanamine.
Question 9
5 marksAbinash is building a house in Ghorahi with cement from a Nepali plant.
What is cement clinker?
Answer
Clinker is the hard, greyish lumps (nodules) that come out of the rotary kiln when the raw mix of limestone and clay is heated to about 1400–1500 °C; it is mostly calcium silicates and aluminates, and it is ground with a little gypsum to make cement.
Marking scheme
- The fused lumps from the kiln (limestone and clay heated to about 1450 °C), ground with gypsum to give cement.
Explain how cement sets and hardens after it is mixed with water.
Answer
Cement does not harden by drying: its compounds react with water (hydration). The calcium silicates form a gel of calcium silicate hydrate, which binds the sand and gravel together, and calcium hydroxide:
Tricalcium silicate reacts in hours and days, giving the early strength; dicalcium silicate reacts over weeks and months, giving the later strength, so concrete keeps getting stronger.
Marking scheme
- Setting and hardening are hydration reactions of the calcium silicates, giving a binding gel (calcium silicate hydrate) and Ca(OH)₂.
- Tricalcium silicate gives early strength (days), dicalcium silicate later strength (weeks to months).
In the kiln, limestone loses carbon dioxide: . How much calcium oxide can one tonne of pure limestone give?
Answer
100 g of gives 56 g of CaO, so 1000 kg gives 560 kg of CaO (and 440 kg of carbon dioxide).
Marking scheme
- 1000 × 56/100 = 560 kg of CaO.
The mason tells Abinash to splash water on the new roof slab every day for two weeks. Give the chemical reason.
Answer
Concrete hardens by the hydration of the calcium silicates, which needs water for days and weeks. If the slab dries out, the reaction stops for want of water and the concrete stays weak and may crack; keeping it wet (curing) lets the hydration go on.
Marking scheme
- Hardening is hydration, which needs water; curing keeps the reaction going so the concrete gains full strength.
Group CLong answers, each on one content area24 marks
Question 10
8 marksA buffer is made by mixing ethanoic acid and sodium ethanoate so that the solution is 0.10 M in and 0.15 M in . at 25 °C.
Explain, with equations, how this solution resists a change in pH when a little acid or a little base is added to it.
Answer
The solution holds a large reserve of both the weak acid, , and its conjugate base, (from the fully ionized salt).
When a little acid is added, the ethanoate ions take up the ions and form weakly ionized ethanoic acid:
When a little base is added, the ethanoic acid neutralizes the ions:
Either way the added ions are removed and only the ratio changes slightly, so the pH hardly changes.
Marking scheme
- The buffer holds large amounts of the weak acid and of its conjugate base (from the salt).
- Added H⁺ is removed by CH₃COO⁻ (equation).
- Added OH⁻ is removed by CH₃COOH (equation), so the ratio and the pH change very little.
Calculate the pH of the buffer.
Answer
By the Henderson–Hasselbalch equation:
Marking scheme
- pKₐ = 4.76.
- pH = pKₐ + log([salt]/[acid]) (Henderson–Hasselbalch).
- pH = 4.93.
. How many times less soluble is silver chloride in 0.010 M sodium chloride solution than in pure water? Show your working.
Answer
In pure water, , so mol/L.
In 0.010 M NaCl, M (the chloride from AgCl is negligible), so mol/L.
AgCl is about 750 times less soluble in the salt solution: the common ion pushes the equilibrium to the left.
Marking scheme
- Solubility in water mol/L.
- In 0.010 M NaCl, mol/L: about 750 times less (common ion effect).
OR
Nischal sets up a Daniell cell, , at 25 °C. V and V.
Describe the standard hydrogen electrode, and explain how it is used to find the standard electrode potential of zinc.
Answer
The standard hydrogen electrode is a platinum foil coated with platinum black, dipped in a solution of ions of 1 M concentration (activity 1), with pure hydrogen gas at 1 atm (1 bar) bubbled over it at 25 °C: . Its potential is taken as exactly 0 V.
To find of zinc, a zinc rod in 1 M solution is joined to the SHE through a salt bridge and a voltmeter: . The cell's emf is 0.76 V, and the zinc is found to be the negative electrode (anode), so V.
Marking scheme
- SHE: platinized platinum in 1 M H⁺ with H₂ at 1 atm, 25 °C.
- Its potential is taken as 0 V (the reference).
- Zinc in 1 M Zn²⁺ is coupled with the SHE; the measured emf (0.76 V) with zinc as the anode gives E° = −0.76 V.
Calculate the emf of Nischal's cell.
Answer
The cell reaction is , with n = 2. By the Nernst equation:
Marking scheme
- V.
- The Nernst equation with n = 2 and .
- V.
Calculate the standard free energy change of the cell reaction and the free energy change in Nischal's cell as it is set up. Explain why the two differ.
Answer
Both are negative, so the reaction is spontaneous either way. In Nischal's cell the product ion, , is a hundred times more concentrated than the reactant ion, (Q = 100 > 1). The reaction is already some way towards its products, so it has less tendency to go on: is less negative, and the emf is lower.
Marking scheme
- kJ mol⁻¹ and kJ mol⁻¹.
- Less negative because Q = [Zn²⁺]/[Cu²⁺] = 100 > 1: more product and less reactant than in the standard cell.
Question 11
8 marksSamir is given two aldehydes in his laboratory: benzaldehyde, which smells of bitter almonds, and ethanal.
Benzaldehyde undergoes the Cannizzaro reaction with concentrated sodium hydroxide, but ethanal does not. Explain why, and write the equation for benzaldehyde.
Answer
The Cannizzaro reaction is given only by aldehydes with no α-hydrogen (no hydrogen on the carbon next to the C=O). Benzaldehyde has none (its CHO is joined to the ring), so with concentrated alkali two molecules react: one is oxidized to the acid (as its salt) and the other reduced to the alcohol (a disproportionation):
The products are sodium benzoate and phenylmethanol (benzyl alcohol). Ethanal has three α-hydrogens, so with alkali it gives the aldol reaction instead.
Marking scheme
- Only aldehydes without α-hydrogen give the Cannizzaro reaction; benzaldehyde has none, ethanal has three.
- The balanced equation.
- Products sodium benzoate and benzyl alcohol: one molecule oxidized, the other reduced (disproportionation).
Write the equation for the reaction of ethanal with dilute sodium hydroxide, and name the product.
Answer
Aldol condensation (addition): two molecules of ethanal join:
The product is 3-hydroxybutanal (aldol). On warming it loses water to give but-2-enal.
Marking scheme
- The equation .
- The product named, 3-hydroxybutanal (aldol).
A compound P, , gives an orange-yellow precipitate with 2,4-dinitrophenylhydrazine and a yellow precipitate when warmed with iodine and sodium hydroxide, but gives no silver mirror with Tollens' reagent. Identify P, write the equation for the yellow precipitate, and explain why P gives no silver mirror.
Answer
The 2,4-DNP test shows a C=O group, and the iodoform test a group. The only carbonyl compounds are butanal, 2-methylpropanal and butan-2-one, and only the ketone has a group, so P is a methyl ketone: butan-2-one, .
The yellow precipitate is iodoform (the iodoform test):
P is a ketone: it has no hydrogen on its carbonyl carbon, so it cannot be oxidized by a mild oxidizing agent like Tollens' reagent, and the silver ions are not reduced to silver.
Marking scheme
- P is butan-2-one, CH₃COCH₂CH₃ (C=O from 2,4-DNP, CH₃CO– from the iodoform test).
- The balanced iodoform equation (CHI₃ the yellow precipitate).
- A ketone has no H on the carbonyl carbon, so it is not oxidized by Tollens' reagent.
Question 12
8 marksSana compares ethanoic acid (b.p. 118 °C) with propan-1-ol (b.p. 97 °C), whose molar mass is the same, 60 g mol⁻¹.
Why does ethanoic acid boil at a higher temperature than propan-1-ol?
Answer
Both form hydrogen bonds, but a carboxylic acid forms two hydrogen bonds between each pair of molecules (its O–H to the other's C=O, both ways), so the molecules exist as dimers even in the vapor. These dimers behave as larger units, and more energy is needed to separate them, so the boiling point is higher than that of the alcohol, whose molecules are joined by single, weaker hydrogen bonds.
Marking scheme
- Ethanoic acid forms two hydrogen bonds per pair of molecules (cyclic dimers).
- The dimers need more energy to separate than the singly H-bonded alcohol molecules, so the b.p. is higher.
Convert ethanoic acid into methanamine, writing the equation for each step with its condition.
Answer
- With ammonia, ethanoic acid gives ammonium ethanoate:
- Heating the ammonium salt removes water and gives ethanamide:
- Hofmann bromamide reaction with bromine and potassium hydroxide gives methanamine, one carbon shorter:
Marking scheme
- Ethanoic acid + NH₃ → ammonium ethanoate.
- Heat → ethanamide (− H₂O).
- Ethanamide + Br₂ + 4KOH → methanamine (Hofmann bromamide), balanced.
Two unlabelled bottles, A and B, hold 0.10 M solutions of methanoic acid and of ethanoic acid. Solution A has pH 2.4 and solution B pH 2.9, and only one of them gives a silver mirror with Tollens' reagent. Say which acid is in each bottle, explaining both the pH values and which one gives the mirror, and write the equation for the mirror.
Answer
A is methanoic acid and B is ethanoic acid. At the same concentration the lower pH belongs to the stronger acid. In ethanoic acid the methyl group pushes electrons towards the carboxylate (+I effect), which destabilizes the ethanoate ion and makes the acid weaker; methanoic acid has no alkyl group, so its anion is more stable and the acid is stronger (pKₐ 3.75 against 4.76).
Methanoic acid, HCOOH, has a hydrogen on the carbonyl carbon: it contains an aldehyde group (H–C=O) as well as a carboxyl group. So, like an aldehyde, it is easily oxidized, to carbon dioxide and water, and reduces the silver ions of Tollens' reagent to a silver mirror; ethanoic acid has a methyl group in that place and gives none. So the mirror comes from A:
Marking scheme
- A (lower pH) is methanoic acid, the stronger acid: the +I methyl group of ethanoic acid destabilizes its anion.
- Methanoic acid has an aldehyde group (H–C=O), so A gives the silver mirror (oxidized to CO₂); ethanoic acid has none.
- The balanced equation.
OR
Aniline, , is the starting material for many dyes and medicines.
Aniline is a weaker base than ammonia. Explain why.
Answer
A base accepts a proton with the lone pair on its nitrogen. In aniline that lone pair is delocalized into the benzene ring by resonance, so it is less available to take up a proton; protonating it would also lose that resonance stabilization. In ammonia the lone pair is held only on the nitrogen and is fully available, so ammonia is the stronger base ( about 4.75 against 9.4 for aniline).
Marking scheme
- The lone pair on aniline's N is delocalized into the ring by resonance.
- It is less available for a proton than ammonia's localized lone pair, so aniline is the weaker base.
How is aniline turned into a scarlet dye with naphthalen-2-ol (2-naphthol)? Write the equations and the conditions.
Answer
- Diazotization: aniline in hydrochloric acid with sodium nitrite (which gives nitrous acid) at 0–5 °C forms benzenediazonium chloride:
- The temperature is kept at 0–5 °C because the diazonium salt decomposes (to phenol and nitrogen) when warm.
- Coupling: the cold diazonium salt is added to naphthalen-2-ol in sodium hydroxide solution; the scarlet azo dye, 1-phenylazo-2-naphthol, forms:
Marking scheme
- Diazotization: aniline + NaNO₂ + HCl → benzenediazonium chloride (equation).
- Condition 0–5 °C (the salt decomposes when warm).
- Coupling with naphthalen-2-ol in NaOH → scarlet 1-phenylazo-2-naphthol (equation).
Aniline and bromine water give 2,4,6-tribromoaniline at once. How would you make 4-bromoaniline instead? Give the steps and the reason.
Answer
The –NH₂ group activates the ring so strongly that all three ortho and para positions are brominated. Its effect is reduced by protecting it first:
- Acetylation: aniline with ethanoic anhydride (or ethanoyl chloride) gives acetanilide, . The nitrogen's lone pair is now shared with the C=O as well, so the ring is less activated, and the bulky group hinders the ortho positions.
- Bromination: acetanilide with bromine in ethanoic acid gives mainly 4-bromoacetanilide.
- Hydrolysis: boiling with acid or alkali removes the acetyl group and gives 4-bromoaniline.
Marking scheme
- Protect the amino group by acetylation to acetanilide (less activating, ortho positions hindered).
- Brominate to 4-bromoacetanilide.
- Hydrolyze to 4-bromoaniline.
Your score
0 / 75
45 questions not marked yet
| Physical Chemistry | – | Full marks 22 |
| Inorganic Chemistry | – | Full marks 12 |
| Organic Chemistry | – | Full marks 33 |
| Applied Chemistry | – | Full marks 8 |
Marks lost, by unit
Mark a question to see your score here.
Found a mistake? Please tell us.
