Skip to content

← Grade 11 Physics Model Papers

Grade 11 Physics Model Paper 2

Full marks: 75Time: 3 hours

Answer every question; where a question has an OR question, answer either one.

A full practice run of NEB's Grade 11 Physics paper (Phy. 101): 75 marks in 3 hours. Group A is one question of 11 multiple-choice items; groups B and C have questions of two or three parts, with the marks of each part. Questions 2 and 6 in group B and Question 11 in group C have an OR question: answer either one. Take g=9.8 m/s2 g = 9.8\ \text{m/s}^2 unless a question gives another value. Write your answers on paper as in the exam hall, then tap your choice in group A, open each other part's answer and give yourself the marks its scheme allows.

A practice paper by Science Playground, made to CDC’s Specification Grid 2077, Grade 11 Physics (Phy. 101). Not an official CDC or NEB paper; the real NEB Grade 11 exam may differ.

Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.

Paper to print (PDF, 4 pages) Answer key and marking scheme

Group AMultiple choice11 marks

Question 1

11 × 1 = 11

Choose the correct option for each of the following questions.

a.

Which pair of quantities has the same dimensions?

Pick an answer to see why.

b.

A bus brakes suddenly, and the standing passengers lurch forwards. Which idea explains this?

Pick an answer to see why.

c.

A porter carries a sack on his back along a level road at a steady speed. How much work does the upward force he exerts on the sack do?

Pick an answer to see why.

d.

Equal stretching forces act on a steel wire and a rubber cord of the same length and thickness. The steel stretches far less. What does this show?

Pick an answer to see why.

e.

Two forces of 3 N and 4 N act on a body at right angles to each other. What is the size of their resultant?

Pick an answer to see why.

f.

When light passes from one medium into another, the ratio sin⁡isin⁡r \dfrac{\sin i}{\sin r} is a constant for the pair of media. What is this law called?

Pick an answer to see why.

g.

A swimming pool looks shallower than it really is. Why?

Pick an answer to see why.

h.

An object is placed 15 cm from a convex lens of focal length 10 cm. Where is the image formed?

Pick an answer to see why.

i.

For a kind of glass, the refractive indices for violet, red and yellow light are 1.66, 1.64 and 1.65. What is its dispersive power?

Pick an answer to see why.

j.

Two charges +q +q and −q -q are fixed a short distance apart. At the point midway between them, which statement is true?

Pick an answer to see why.

k.

What are the majority charge carriers in an n-type semiconductor?

Pick an answer to see why.

Group BShort answers, each on one content area40 marks

Question 2

5 marks

Shristi checks the equations in her physics notebook by their dimensions.

a.
[2]

What are the dimensions of a physical quantity? State the principle of homogeneity of dimensions.

Answer

The dimensions of a physical quantity are the powers to which the fundamental quantities (mass M, length L, time T and so on) must be raised to represent it: velocity, for example, is [M0LT−1] [M^0LT^{-1}] .

Principle of homogeneity: a physically correct equation has the same dimensions in every term on both sides; only quantities of the same dimensions can be added, subtracted or equated.

Marking scheme
  • Dimensions: the powers of the fundamental quantities that represent the quantity.
  • Homogeneity: every term of a correct equation has the same dimensions.
b.
[2]

Check whether the equation v2=u2+2as v^2 = u^2 + 2as is dimensionally correct.

Answer

[v2]=[u2]=(LT−1)2=[L2T−2] [v^2] = [u^2] = (LT^{-1})^2 = [L^2T^{-2}]
[2as]=[LT−2]×[L]=[L2T−2](the number 2 has no dimensions) [2as] = [LT^{-2}] \times [L] = [L^2T^{-2}] \quad (\text{the number 2 has no dimensions})
Every term has the dimensions [L2T−2] [L^2T^{-2}] , so the equation is dimensionally correct.

Marking scheme
  • Dimensions of v2 v^2 and u2 u^2 : [L2T−2] [L^2T^{-2}] .
  • Dimensions of 2as 2as : [L2T−2] [L^2T^{-2}] , the same, so the equation is dimensionally correct.
c.
[1]

Shristi's friend writes s=ut+at2 s = ut + at^2 and says it must be right, since it is dimensionally correct. Is she right? Give a reason.

Answer

No. Every term is in [L] [L] , so it is dimensionally correct, but the right equation is s=ut+12at2 s = ut + \tfrac{1}{2}at^2 . Dimensional analysis can't find a pure number such as 12 \tfrac{1}{2} , so a dimensionally correct equation can still be wrong.

Marking scheme
  • No: dimensions can't check pure numbers (the ½ is missing), so a dimensionally correct equation may still be wrong.

OR

On a rainy day in Ilam, rain falls vertically at 6.0 m/s, and Kushal cycles due east at 8.0 m/s.

a.
[2]

Define relative velocity. Write the velocity of a body A relative to a body B in terms of their velocities.

Answer

The relative velocity of a body A with respect to a body B is the velocity with which A appears to move to an observer on B: the rate of change of A's position as measured from B.

v⃗AB=v⃗A−v⃗B \vec{v}_{AB} = \vec{v}_A - \vec{v}_B

Marking scheme
  • Relative velocity: the velocity of A as seen by an observer moving with B.
  • v⃗AB=v⃗A−v⃗B \vec{v}_{AB} = \vec{v}_A - \vec{v}_B .
b.
[2]

Find the speed and direction of the rain as Kushal sees it.

Answer

The velocity of the rain relative to Kushal is v⃗rain−v⃗Kushal \vec{v}_{rain} - \vec{v}_{Kushal} : 6.0 m/s down, plus 8.0 m/s towards the west.
v=6.02+8.02=10 m/s,tan⁡θ=8.06.0⇒θ=53° v = \sqrt{6.0^2 + 8.0^2} = 10\ \text{m/s}, \qquad \tan\theta = \frac{8.0}{6.0} \Rightarrow \theta = 53°
10 m/s, coming down at 53° to the vertical, slanting towards him from the east (the direction he is riding into).

Marking scheme
  • Relative speed 10 m/s.
  • At 53° to the vertical, coming from the front (east).
c.
[1]

How should he hold his umbrella to keep dry?

Answer

Tilted forwards, towards the east, at about 53° to the vertical: along the direction the rain comes from relative to him.

Marking scheme
  • Tilted forwards (into his direction of motion), at about 53° to the vertical.

Question 3

5 marks

A railway line in the Tarai is laid in steel rails 12 m long at 10 °C. In summer the rails can reach 45 °C. (Linear expansivity of steel = 1.2×10−5 K−1 1.2 \times 10^{-5}\ \text{K}^{-1} .)

a.
[1]

Why are small gaps left between the rails when a railway line is laid?

Answer

The rails expand when they get hot. A gap lets each rail lengthen freely; without it, the rails would push hard against each other (thermal stress) and buckle the line.

Marking scheme
  • Room for the rails to expand when heated, so they do not buckle.
b.
[3]

Calculate the smallest gap that must be left between two rails.

Answer

ΔL=L0 α Δθ=12×1.2×10−5×(45−10)=12×1.2×10−5×35=5.0×10−3 m \Delta L = L_0\,\alpha\,\Delta\theta = 12 \times 1.2 \times 10^{-5} \times (45 - 10) = 12 \times 1.2 \times 10^{-5} \times 35 = 5.0 \times 10^{-3}\ \text{m}
The gap must be at least about 5.0 mm. (Each rail grows 5.0 mm; half of it goes into the gap at each end, so the gap between two rails closes by 2.5 + 2.5 = 5.0 mm.)

Marking scheme
  • ΔL=L0αΔθ \Delta L = L_0\alpha\Delta\theta with Δθ=35 \Delta\theta = 35 K.
  • Values substituted correctly.
  • Gap about 5.0 mm.
c.
[1]

A bimetallic strip of brass and iron (brass expands more) is straight at room temperature. Which way does it bend when it is cooled in a freezer? Give a reason.

Answer

It bends into an arc with the brass on the inside (the iron on the outside): brass also contracts more than iron when cooled, so it becomes the shorter strip, and the shorter strip must lie along the shorter, inner curve.

Marking scheme
  • Brass on the inside (concave side), because it contracts more on cooling and becomes the shorter strip.

Question 4

5 marks

A thermometer in Nabin's school lab has its fixed points marked wrongly: it reads 5 °C in pure melting ice and 95 °C in steam above boiling water at standard pressure.

a.
[3]

What is meant by thermal equilibrium? State the zeroth law of thermodynamics, and say why it is the working principle of a thermometer.

Answer

Two bodies are in thermal equilibrium when no net heat flows between them when they are in thermal contact: they are at the same temperature.

Zeroth law: if two bodies are each in thermal equilibrium with a third, they are in thermal equilibrium with each other.

A thermometer is the third body. Left in contact with a body until they reach thermal equilibrium, it is at the body's temperature; by the zeroth law, two bodies that give the same reading are at the same temperature, without being put in contact with each other.

Marking scheme
  • Thermal equilibrium: no net heat flow between bodies in contact (same temperature).
  • Zeroth law stated.
  • The thermometer reaches equilibrium with the body, so equal readings mean equal temperatures.
b.
[2]

Find the true temperature when this thermometer reads 41 °C. At what temperature does it read correctly?

Answer

The thread goes the same fraction of the way between the fixed points on both scales:
C−0100−0=X−595−5⇒C=X−590×100 \frac{C - 0}{100 - 0} = \frac{X - 5}{95 - 5} \quad\Rightarrow\quad C = \frac{X - 5}{90} \times 100
For X=41 X = 41 : C=3690×100=40 C = \frac{36}{90} \times 100 = 40 °C.

It reads correctly when C=X C = X : X−590×100=X \frac{X - 5}{90} \times 100 = X , so 100X−500=90X 100X - 500 = 90X and X=50 X = 50 °C.

True temperature 40 °C; it reads correctly at 50 °C.

Marking scheme
  • True temperature 40 °C.
  • Reads correctly at 50 °C.

Question 5

5 marks

Saugat leaves a black iron hot plate of surface area 0.020 m² at 227 °C in a room at 27 °C. Treat it as a black body. (Stefan's constant σ=5.67×10−8 \sigma = 5.67 \times 10^{-8} W/(m² K⁴).)

a.
[1]

State Stefan's law of black-body radiation.

Answer

The energy radiated per second per unit area by a perfectly black body (its emissive power) is directly proportional to the fourth power of its absolute temperature: E=σT4 E = \sigma T^4 .

Marking scheme
  • Emissive power of a black body ∝ T4 T^4 (absolute temperature).
b.
[3]

Calculate the net rate at which the hot plate loses heat by radiation.

Answer

In kelvin: T=227+273=500 T = 227 + 273 = 500 K and T0=27+273=300 T_0 = 27 + 273 = 300 K. The plate also absorbs radiation from the room, so
P=σA (T4−T04)=5.67×10−8×0.020×(6.25×1010−0.81×1010) P = \sigma A\,(T^4 - T_0^4) = 5.67 \times 10^{-8} \times 0.020 \times (6.25 \times 10^{10} - 0.81 \times 10^{10})
P=5.67×10−8×0.020×5.44×1010=62 W P = 5.67 \times 10^{-8} \times 0.020 \times 5.44 \times 10^{10} = 62\ \text{W}
About 62 W.

Marking scheme
  • Temperatures in kelvin, 500 K and 300 K.
  • Net loss σA(T4−T04) \sigma A(T^4 - T_0^4) .
  • About 62 W.
c.
[1]

Saugat says that if he heated the plate to 454 °C, twice 227 °C, it would radiate 24=16 2^4 = 16 times as much energy per second. Is he right? Give a reason.

Answer

No. Stefan's law uses the absolute temperature: 454 °C is 727 K, not twice 500 K. The energy radiated per second rises by (727500)4≈4.5 \left(\frac{727}{500}\right)^4 \approx 4.5 times, not 16.

Marking scheme
  • No: the temperature must be absolute (727 K against 500 K), so it rises only about 4.5 times.

Question 6

5 marks

Dr. Anjali, a dentist in Biratnagar, uses a small concave mirror of focal length 10 cm to look at a tooth held 5.0 cm from it.

a.
[2]

Define the principal focus and the radius of curvature of a concave mirror.

Answer

The principal focus is the point on the principal axis where rays parallel and close to the axis meet after reflection from the mirror.

The radius of curvature is the radius of the sphere of which the mirror is a part: the distance from the pole to the center of curvature.

Marking scheme
  • Principal focus: where paraxial rays parallel to the axis meet after reflection.
  • Radius of curvature: radius of the sphere the mirror is part of (pole to center of curvature).
b.
[1]

Why do dentists use a concave mirror, and not a plane one?

Answer

With the tooth closer than the focus, a concave mirror forms a virtual, erect and magnified image, so the dentist sees an enlarged, upright view of the tooth. A plane mirror only gives an image of the same size.

Marking scheme
  • Object within the focus: an erect, magnified (virtual) image.
c.
[2]

Find the position and the magnification of the image.

Answer

With real distances positive:
1v=1f−1u=110−15.0=−110⇒v=−10 cm \frac{1}{v} = \frac{1}{f} - \frac{1}{u} = \frac{1}{10} - \frac{1}{5.0} = -\frac{1}{10} \quad\Rightarrow\quad v = -10\ \text{cm}
The minus sign means a virtual image, 10 cm behind the mirror.
m=vu=−105.0=−2 m = \frac{v}{u} = \frac{-10}{5.0} = -2
The image is twice the size of the tooth; the negative m m in this convention means it is virtual and erect.

Marking scheme
  • v=−10 v = -10 cm: virtual, 10 cm behind the mirror.
  • Magnification 2 (erect, twice the size).

OR

Swastika measures the deviation of light through a thin glass prism of refracting angle 5.0°.

a.
[2]

Define the angle of deviation and the angle of minimum deviation of a prism.

Answer

The angle of deviation is the angle between the direction of the ray entering the prism (produced forward) and the ray leaving it.

The angle of minimum deviation is the smallest value the deviation takes as the angle of incidence is changed.

Marking scheme
  • Deviation: angle between the incident ray produced and the emergent ray.
  • Minimum deviation: its least value as the angle of incidence changes.
b.
[1]

How does the ray travel inside a prism at minimum deviation?

Answer

At minimum deviation the ray passes through the prism symmetrically: the angle of incidence equals the angle of emergence, and inside an equilateral (or isosceles) prism the ray runs parallel to the base.

Marking scheme
  • Symmetrically: angle of incidence = angle of emergence (ray parallel to the base).
c.
[2]

The refractive index of the glass is 1.50 for yellow light and 1.48 for red light. Find the deviation of each.

Answer

For a thin prism, δ=(μ−1)A \delta = (\mu - 1)A :
δy=(1.50−1)×5.0°=2.5°,δr=(1.48−1)×5.0°=2.4° \delta_y = (1.50 - 1) \times 5.0° = 2.5°, \qquad \delta_r = (1.48 - 1) \times 5.0° = 2.4°
Yellow light is deviated 2.5°, red light 2.4°.

Marking scheme
  • δ=(μ−1)A \delta = (\mu - 1)A : yellow 2.5°.
  • Red 2.4°.

Question 7

5 marks

A small metal sphere on an insulating stand in Sujana's school lab carries a charge of +2.0 μC +2.0\ \mu\text{C} . (k=14πε0=9.0×109 k = \frac{1}{4\pi\varepsilon_0} = 9.0 \times 10^9 N m²/C².)

a.
[2]

Give two properties of electric field lines, and explain why two field lines never cross.

Answer

Field lines start on positive charges and end on negative charges; they are closer together where the field is stronger; they meet a conductor's surface at right angles.

They never cross: the tangent to a line at any point gives the direction of the field there. If two lines crossed, the field at that point would have two directions at once, which is impossible.

Marking scheme
  • Two properties (from positive to negative; denser where the field is stronger; normal to a conductor's surface).
  • They never cross, since the field at a point has only one direction.
b.
[3]

Use Gauss's law to show that the field outside a uniformly charged sphere is the same as if all its charge were at its center. Then find the field 30 cm from the sphere's center, and say what the field is inside a hollow charged conducting sphere.

Answer

Take a spherical Gaussian surface of radius r r round the sphere, with the same center. By symmetry the field is radial and has the same size E E everywhere on it, so the flux is E×4πr2 E \times 4\pi r^2 . Gauss's law says this equals Qε0 \frac{Q}{\varepsilon_0} :
E⋅4πr2=Qε0⇒E=Q4πε0r2 E \cdot 4\pi r^2 = \frac{Q}{\varepsilon_0} \quad\Rightarrow\quad E = \frac{Q}{4\pi\varepsilon_0 r^2}
the field of a point charge Q Q at the center.

At 30 cm: E=9.0×109×2.0×10−60.302=2.0×105 E = \dfrac{9.0 \times 10^9 \times 2.0 \times 10^{-6}}{0.30^2} = 2.0 \times 10^5 N/C, directed away from the sphere.

Inside a hollow charged conductor, a Gaussian surface encloses no charge, so the field is zero.

Marking scheme
  • Gauss's law on a concentric sphere: E⋅4πr2=Q/ε0 E \cdot 4\pi r^2 = Q/\varepsilon_0 , the field of a point charge at the center.
  • E=2.0×105 E = 2.0 \times 10^5 N/C at 30 cm.
  • Zero inside (no charge enclosed).

Question 8

5 marks

Sangam's torch cell has an e.m.f. of 1.5 V and an internal resistance of 0.50 Ω. He connects it to a bulb of resistance 2.5 Ω.

a.
[2]

Define the e.m.f. of a cell and its internal resistance.

Answer

The e.m.f. of a cell is the energy it converts from chemical to electrical form per unit charge passing through it: the work done per coulomb in driving charge round the whole circuit (equal to the p.d. across its terminals when no current flows).

The internal resistance is the resistance of the materials inside the cell to the current flowing through it.

Marking scheme
  • E.m.f.: energy converted into electrical energy per unit charge through the cell.
  • Internal resistance: the resistance inside the cell itself.
b.
[3]

Calculate the current, the terminal p.d. and the "lost volts". Then explain why the torch grows dimmer as the cell gets old, even though its e.m.f. stays nearly 1.5 V.

Answer

I=ER+r=1.52.5+0.50=0.50 A I = \frac{E}{R + r} = \frac{1.5}{2.5 + 0.50} = 0.50\ \text{A}
V=IR=0.50×2.5=1.25 V,lost volts=Ir=0.50×0.50=0.25 V V = IR = 0.50 \times 2.5 = 1.25\ \text{V}, \qquad \text{lost volts} = Ir = 0.50 \times 0.50 = 0.25\ \text{V}
As a cell ages, its internal resistance rises. The current ER+r \frac{E}{R + r} falls, more of the e.m.f. is lost inside the cell, and the terminal p.d. across the bulb drops, so the bulb gets less power and glows dimmer.

Marking scheme
  • Current 0.50 A.
  • Terminal p.d. 1.25 V and lost volts 0.25 V.
  • Internal resistance grows with age: less current and terminal p.d., so the bulb is dimmer.

Question 9

5 marks

Rabina has two capacitors, of 2.0 μF and 3.0 μF, for a project.

a.
[1]

Why is the total capacitance of capacitors in parallel larger than any one of them?

Answer

In parallel, each capacitor has the same p.d. across it, and the total charge stored is the sum of their charges. Joining them in parallel is like increasing the area of the plates, so the total C=C1+C2 C = C_1 + C_2 is larger than either.

Marking scheme
  • Same p.d., charges add (like larger plates), so C=C1+C2 C = C_1 + C_2 .
b.
[2]

Find the capacitance of the two in series and in parallel.

Answer

Series: 1C=12.0+13.0=56⇒C=1.2 μFParallel: C=2.0+3.0=5.0 μF \text{Series: } \frac{1}{C} = \frac{1}{2.0} + \frac{1}{3.0} = \frac{5}{6} \Rightarrow C = 1.2\ \mu\text{F} \qquad \text{Parallel: } C = 2.0 + 3.0 = 5.0\ \mu\text{F}

Marking scheme
  • Series 1.2 μF.
  • Parallel 5.0 μF.
c.
[2]

She connects the two in series to a 10 V supply. Find the charge on each and the p.d. across each. Which capacitor has the larger p.d., and why?

Answer

In series both carry the same charge:
Q=CV=1.2×10−6×10=1.2×10−5 C (12 μC) Q = CV = 1.2 \times 10^{-6} \times 10 = 1.2 \times 10^{-5}\ \text{C}\ (12\ \mu\text{C})
V1=QC1=122.0=6.0 V,V2=123.0=4.0 V V_1 = \frac{Q}{C_1} = \frac{12}{2.0} = 6.0\ \text{V}, \qquad V_2 = \frac{12}{3.0} = 4.0\ \text{V}
The 2.0 μF capacitor has the larger p.d.: with the same charge, V=Q/C V = Q/C is larger for the smaller capacitance.

Marking scheme
  • Same charge, 12 μC, on each.
  • 6.0 V across 2.0 μF and 4.0 V across 3.0 μF; the smaller capacitor has the larger p.d., since V=Q/C V = Q/C .

Group CLong answers, each on one content area24 marks

Question 10

8 marks

Aaryan's team slides a crate down a wooden ramp at a building site in Hetauda. The ramp makes 37° with the horizontal (sin⁡37°=0.60 \sin 37° = 0.60 , cos⁡37°=0.80 \cos 37° = 0.80 ).

a.
[3]

Define the angle of friction and the angle of repose. Show that the tangent of each equals the coefficient of static friction.

Answer

The angle of friction λ \lambda is the angle between the normal reaction R R and the resultant of R R and the limiting friction F F : tan⁡λ=FR=μs \tan\lambda = \frac{F}{R} = \mu_s .

The angle of repose θ \theta is the smallest angle of an inclined plane at which a body placed on it just begins to slide down.

At the angle of repose, the body is just about to slide, so friction is limiting. Along the slope, F=mgsin⁡θ F = mg\sin\theta ; perpendicular to it, R=mgcos⁡θ R = mg\cos\theta . So
μs=FR=mgsin⁡θmgcos⁡θ=tan⁡θ \mu_s = \frac{F}{R} = \frac{mg\sin\theta}{mg\cos\theta} = \tan\theta
and tan⁡λ=tan⁡θ=μs \tan\lambda = \tan\theta = \mu_s : the angle of repose equals the angle of friction.

Marking scheme
  • Angle of friction defined (between R R and the resultant of R R and limiting friction).
  • Angle of repose defined (the least slope at which a body begins to slide).
  • F=mgsin⁡θ F = mg\sin\theta , R=mgcos⁡θ R = mg\cos\theta , so tan⁡θ=μs=tan⁡λ \tan\theta = \mu_s = \tan\lambda .
b.
[2]

Once the crate is moving, the coefficient of kinetic friction is 0.25. Find its acceleration down the ramp.

Answer

Along the slope, ma=mgsin⁡θ−μkmgcos⁡θ ma = mg\sin\theta - \mu_k mg\cos\theta , so
a=g(sin⁡θ−μkcos⁡θ)=9.8×(0.60−0.25×0.80)=9.8×0.40=3.9 m/s2 a = g(\sin\theta - \mu_k\cos\theta) = 9.8 \times (0.60 - 0.25 \times 0.80) = 9.8 \times 0.40 = 3.9\ \text{m/s}^2

Marking scheme
  • a=g(sin⁡θ−μkcos⁡θ) a = g(\sin\theta - \mu_k\cos\theta) .
  • a≈3.9 a \approx 3.9 m/s².
c.
[3]

The coefficient of static friction between the crate and the ramp is 0.50. Will the crate, placed at rest on the ramp, start to slide by itself? Find the largest angle at which the ramp could be set so that the crate stays at rest, and say whether laying a wet plank on the ramp would make this angle larger or smaller.

Answer

The crate starts to slide if tan⁡θ>μs \tan\theta > \mu_s . Here tan⁡37°=0.600.80=0.75>0.50 \tan 37° = \frac{0.60}{0.80} = 0.75 > 0.50 , so yes, it slides by itself.

The largest angle at which it stays at rest is the angle of repose: tan⁡θ=0.50 \tan\theta = 0.50 , so θ=27° \theta = 27° (26.6°).

A wet plank is more slippery, so μs \mu_s is smaller and the angle of repose is smaller: the crate would slide on a gentler slope.

Marking scheme
  • tan⁡37°=0.75>0.50 \tan 37° = 0.75 > 0.50 , so it slides.
  • Largest angle about 27° (tan⁡θ=0.50 \tan\theta = 0.50 ).
  • Wet plank: smaller μs \mu_s , smaller angle.

Question 11

8 marks

A car of mass 1000 kg goes round a bend of radius 50 m on the Mugling road at 36 km/h.

a.
[2]

What supplies the centripetal force on the car on a flat road, and why are roads banked at bends?

Answer

On a flat road the centripetal force is supplied only by friction between the tyres and the road. If the car is too fast, or the road wet, friction may not be enough and the car skids outwards.

On a banked road the normal reaction of the road is tilted towards the center, and its horizontal part supplies centripetal force, so the car can take the bend safely without relying on friction (at the speed the road is designed for).

Marking scheme
  • Flat road: friction alone, which may be too small (skidding).
  • Banking: the horizontal part of the normal reaction supplies centripetal force.
b.
[3]

Calculate the centripetal force needed on a flat road, and the least coefficient of friction between the tyres and the road for the car not to skid.

Answer

v=36 v = 36 km/h =10 = 10 m/s.
F=mv2r=1000×10250=2000 N F = \frac{mv^2}{r} = \frac{1000 \times 10^2}{50} = 2000\ \text{N}
Friction must supply it: μmg≥mv2r \mu mg \ge \frac{mv^2}{r} , so
μ=v2rg=10050×9.8=0.20 \mu = \frac{v^2}{rg} = \frac{100}{50 \times 9.8} = 0.20
2000 N; coefficient of friction at least 0.20.

Marking scheme
  • Speed in m/s: 10 m/s.
  • Centripetal force 2000 N.
  • Least μ=v2/rg≈0.20 \mu = v^2/rg \approx 0.20 .
c.
[3]

Find the angle at which the bend should be banked so that a car at 36 km/h needs no friction. On a wet day, the coefficient of friction on a flat road falls to 0.40. Could a driver safely take the flat bend at 72 km/h? Show your working.

Answer

With no friction, tan⁡θ=v2rg=10050×9.8=0.204 \tan\theta = \dfrac{v^2}{rg} = \dfrac{100}{50 \times 9.8} = 0.204 , so θ=11.5° \theta = 11.5° .

At 72 km/h =20 = 20 m/s, the friction needed is μ=v2rg=400490=0.82 \mu = \dfrac{v^2}{rg} = \dfrac{400}{490} = 0.82 . The wet road gives at most 0.40, less than half of this, so no: the car would skid outwards. (The safe speed is μrg=0.40×50×9.8=14 \sqrt{\mu rg} = \sqrt{0.40 \times 50 \times 9.8} = 14 m/s, about 50 km/h.)

Marking scheme
  • Banking angle about 11.5°.
  • At 20 m/s the friction needed is μ≈0.82 \mu \approx 0.82 .
  • More than 0.40, so not safe: the car skids.

OR

A water pump on the ground floor of Pragya's house in Lalitpur lifts 500 kg of water to a tank 20 m above it in 5.0 minutes.

a.
[2]

Distinguish between conservative and non-conservative forces, with an example of each.

Answer

The work done by a conservative force in moving a body between two points doesn't depend on the path, and it is zero round any closed path; the energy can be got back (gravity, the spring force).

The work done by a non-conservative force depends on the path, and it is not zero round a closed path; the energy is turned into heat and can't be got back as mechanical energy (friction, air resistance).

Marking scheme
  • Conservative: work independent of path, zero round a closed path (e.g. gravity).
  • Non-conservative: work depends on the path (e.g. friction).
b.
[3]

Calculate the work done on the water and the useful power of the pump.

Answer

W=mgh=500×9.8×20=9.8×104 J W = mgh = 500 \times 9.8 \times 20 = 9.8 \times 10^4\ \text{J}
P=Wt=9.8×1045.0×60=98 000300=327 W P = \frac{W}{t} = \frac{9.8 \times 10^4}{5.0 \times 60} = \frac{98\,000}{300} = 327\ \text{W}
Work 98 kJ; useful power about 330 W.

Marking scheme
  • W=mgh W = mgh .
  • W=9.8×104 W = 9.8 \times 10^4 J.
  • Power about 327 W (time in seconds).
c.
[3]

The pump is only 70% efficient. Pragya's father wants to buy a 0.5 hp motor for it (1 hp = 746 W). Will it be powerful enough? Show your working, and say where the rest of the energy goes.

Answer

Input power=useful powerefficiency=3270.70=467 W \text{Input power} = \frac{\text{useful power}}{\text{efficiency}} = \frac{327}{0.70} = 467\ \text{W}
A 0.5 hp motor gives 0.5×746=373 0.5 \times 746 = 373 W, less than 467 W. No: it would take longer than 5 minutes (about 98 000/(0.70×373)=375 98\,000 / (0.70 \times 373) = 375 s), or he needs a motor of at least about 0.63 hp (in practice a 1 hp one).

The other 30% of the input is turned into heat (and sound) by friction in the pump and the pipes, and by the resistance of the motor's windings.

Marking scheme
  • Input power needed about 467 W.
  • 0.5 hp = 373 W is less, so not enough (or it takes longer).
  • The wasted energy goes to heat and sound (friction, resistance).

Question 12

8 marks

Light from a distant galaxy contains the red line of hydrogen, which in a laboratory has a wavelength of 656.3 nm. In the galaxy's light it is measured at 669.4 nm. (Speed of light = 3.0×108 3.0 \times 10^8 m/s, H0=70 H_0 = 70 km/s per Mpc, 1 Mpc = 3.09×1022 3.09 \times 10^{22} m, 1 year = 3.16×107 3.16 \times 10^7 s.)

a.
[3]

What is the redshift of a galaxy? Explain how the redshifts of galaxies show that the universe is expanding, and state Hubble's law.

Answer

The redshift z=Δλλ0 z = \frac{\Delta\lambda}{\lambda_0} is the fractional increase in the wavelength of a galaxy's light, compared with the same line measured in a laboratory: its lines are shifted towards the red end of the spectrum.

Light from almost every galaxy is redshifted, so they are all moving away from us, and the farther a galaxy is, the larger its redshift. That is what we would see if space itself were stretching, carrying the galaxies apart from one another: the universe is expanding.

Hubble's law: the recessional speed of a galaxy is directly proportional to its distance from us, v=H0d v = H_0 d .

Marking scheme
  • Redshift: the fractional increase in wavelength, z=Δλ/λ0 z = \Delta\lambda/\lambda_0 .
  • Nearly all galaxies redshifted, farther ones more: they move apart, the universe expands.
  • Hubble's law: v=H0d v = H_0 d .
b.
[3]

Calculate the galaxy's redshift, its recessional speed and its distance.

Answer

z=Δλλ0=669.4−656.3656.3=13.1656.3=0.020 z = \frac{\Delta\lambda}{\lambda_0} = \frac{669.4 - 656.3}{656.3} = \frac{13.1}{656.3} = 0.020
v=zc=0.020×3.0×108=6.0×106 m/s=6000 km/s v = zc = 0.020 \times 3.0 \times 10^8 = 6.0 \times 10^6\ \text{m/s} = 6000\ \text{km/s}
d=vH0=600070=86 Mpc d = \frac{v}{H_0} = \frac{6000}{70} = 86\ \text{Mpc}

Marking scheme
  • Redshift 0.020.
  • Speed 6.0×106 6.0 \times 10^6 m/s (6000 km/s).
  • Distance about 86 Mpc.
c.
[2]

Use the Hubble constant to estimate the age of the universe in years.

Answer

If every galaxy has moved at a steady speed since they were all together, the time since then is T0=dv=1H0 T_0 = \frac{d}{v} = \frac{1}{H_0} . In SI units,
H0=70×103 m/s3.09×1022 m=2.27×10−18 s−1 H_0 = \frac{70 \times 10^3\ \text{m/s}}{3.09 \times 10^{22}\ \text{m}} = 2.27 \times 10^{-18}\ \text{s}^{-1}
T0=1H0=4.4×1017 s=4.4×10173.16×107=1.4×1010 years T_0 = \frac{1}{H_0} = 4.4 \times 10^{17}\ \text{s} = \frac{4.4 \times 10^{17}}{3.16 \times 10^7} = 1.4 \times 10^{10}\ \text{years}
About 14 billion years.

Marking scheme
  • T0=1/H0 T_0 = 1/H_0 , with H0 H_0 in s⁻¹ (2.27×10−18 2.27 \times 10^{-18} s⁻¹).
  • About 1.4×1010 1.4 \times 10^{10} years.

Your score

0 / 75

41 questions not marked yet

Mechanics–Full marks 26
Heat and Thermodynamics–Full marks 15
Waves and Optics–Full marks 9
Electricity and Magnetism–Full marks 16
Modern Physics–Full marks 9

Marks lost, by unit

Mark a question to see your score here.

Found a mistake? Please tell us.

Score 0 of 0 0 of 41 marked Time left: 3:00:00