← Grade 11 Physics Model Papers
Grade 11 Physics Model Paper 3
Full marks: 75Time: 3 hours
Answer every question; where a question has an OR question, answer either one.
A full practice run of NEB's Grade 11 Physics paper (Phy. 101): 75 marks in 3 hours. Group A is one question of 11 multiple-choice items; groups B and C have questions of two or three parts, with the marks of each part. Questions 2 and 6 in group B and Question 11 in group C have an OR question: answer either one. Take unless a question gives another value. Write your answers on paper as in the exam hall, then tap your choice in group A, open each other part's answer and give yourself the marks its scheme allows.
A practice paper by Science Playground, made to CDC’s Specification Grid 2077, Grade 11 Physics (Phy. 101). Not an official CDC or NEB paper; the real NEB Grade 11 exam may differ.
Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.
Paper to print (PDF, 4 pages) Answer key and marking scheme
Group AMultiple choice11 marks
Question 1
11 × 1 = 11Choose the correct option for each of the following questions.
The newton is a derived unit. What is it in SI base units?
Pick an answer to see why.
From the top of a wall, Rupesh drops one stone and, at the same moment, throws an identical stone horizontally. Ignore air resistance. Which reaches the ground first?
Pick an answer to see why.
A packet of sugar weighed on a spring balance at the poles reads slightly more than at the equator. Why?
Pick an answer to see why.
A stone tied to a string is whirled in a horizontal circle. The string suddenly breaks. In which direction does the stone fly off?
Pick an answer to see why.
The momentum of a body is doubled, its mass staying the same. By what factor does its kinetic energy change?
Pick an answer to see why.
How is the focal length of a spherical mirror of small aperture related to its radius of curvature ?
Pick an answer to see why.
Why are convex mirrors used as the rear-view mirrors of vehicles?
Pick an answer to see why.
A coin lies at the bottom of a bucket of water 12 cm deep. The refractive index of water is 4/3. How deep does the coin appear, looking straight down?
Pick an answer to see why.
A biconvex lens is made of glass of refractive index 1.5, and both its faces have a radius of curvature of 20 cm. What is its focal length?
Pick an answer to see why.
Two point charges repel each other with a force . One charge is doubled and the distance between them is halved. What is the force now?
Pick an answer to see why.
What do isotopes of an element have in common?
Pick an answer to see why.
Group BShort answers, each on one content area40 marks
Question 2
5 marksA ferry boat on the Narayani can move at 4.0 m/s in still water. The river is 80 m wide and flows at 3.0 m/s. Its boatman, Gaurav, first points the boat straight across.
State the parallelogram law of vector addition. What is meant by the resolution of a vector?
Answer
Parallelogram law: if two vectors acting at a point are represented in size and direction by the two adjacent sides of a parallelogram drawn from that point, their resultant is represented in size and direction by the diagonal of the parallelogram through that point.
Resolution of a vector is splitting it into two or more component vectors whose sum is the vector, usually two at right angles, and .
Marking scheme
- Parallelogram law stated (adjacent sides, resultant the diagonal from the same point).
- Resolution: splitting a vector into components (usually at right angles).
Find the boat's resultant velocity, the time it takes to cross, and how far downstream it lands.
Answer
The two velocities are at right angles:
Only the 4.0 m/s carries it across: s. In that time the river carries it m downstream.
Marking scheme
- Resultant 5.0 m/s at 37° downstream of straight across.
- Time 20 s and drift 60 m.
In which direction should Gaurav point the boat to land exactly opposite his starting point?
Answer
Upstream, so that the upstream component of the boat's velocity cancels the river's: , so and from the line straight across, towards upstream.
Marking scheme
- Upstream at about 49° to the straight-across line ().
OR
Diya (30 kg) sits on a see-saw in a park in Dhangadhi, 1.5 m from its pivot. Her brother Rohan (45 kg) sits on the other side.
Define the moment of a force (torque). State the principle of moments.
Answer
The moment of a force about a point is the product of the force and the perpendicular distance of its line of action from that point; it measures the turning effect of the force (unit N m).
Principle of moments: for a body in equilibrium, the sum of the clockwise moments about any point equals the sum of the anticlockwise moments about the same point.
Marking scheme
- Moment = force × perpendicular distance from the point to its line of action.
- Principle of moments: clockwise moments = anticlockwise moments in equilibrium.
How far from the pivot must Rohan sit for the see-saw to balance? What is the upward force of the pivot on the see-saw? (Ignore the weight of the plank, which is balanced at the pivot.)
Answer
Moments about the pivot:
The plank doesn't move up or down, so the pivot pushes up with the total weight: N.
1.0 m from the pivot; the pivot pushes up with 735 N.
Marking scheme
- Rohan sits 1.0 m from the pivot.
- Upward force of the pivot 735 N.
Once balanced, both children move 0.5 m farther from the pivot. Diya says the see-saw will still balance, since both moved by the same amount. Is she right? Give a reason.
Answer
No. The moments are now N m on Diya's side and N m on Rohan's (about 588 N m against 662 N m). They are no longer equal, so Rohan's side goes down: moving both by the same distance adds a larger moment for the heavier child.
Marking scheme
- No: the new moments (30 × 2.0 against 45 × 1.5, times g) are unequal, so Rohan's side goes down.
Question 3
5 marksOn a hot day in Nepalgunj, Salim cools 0.50 kg of lemonade (take it as water) at 30 °C by dropping in ice at 0 °C. (Specific heat capacity of water = 4200 J/(kg K), specific latent heat of fusion of ice = J/kg; ignore the glass and any heat from the air.)
Why does a scald from steam at 100 °C hurt much more than one from boiling water at 100 °C?
Answer
Steam condensing on the skin first gives out its large latent heat of vaporization (2.26 × 10⁶ J for every kilogram) at 100 °C, and only then cools as water. So the same mass of steam gives the skin far more heat than boiling water does.
Marking scheme
- Steam gives out its large latent heat of vaporization as it condenses, so much more heat reaches the skin.
What mass of ice must he add to cool the lemonade to 10 °C?
Answer
By the principle of calorimetry, heat lost by the lemonade = heat gained by the ice.
Heat lost: J.
The ice first melts at 0 °C, then the melted water warms from 0 °C to 10 °C:
About 0.11 kg (111 g) of ice.
Marking scheme
- Heat lost by the lemonade 42 000 J.
- Heat gained by the ice: (melting and then warming to 10 °C).
- kg.
Would 0.11 kg of water at 0 °C cool the lemonade as much as 0.11 kg of ice at 0 °C? Give a reason.
Answer
No, much less. The ice takes in 336 000 J for every kilogram to melt before its temperature rises at all; water at 0 °C only warms up. Most of the cooling by the ice comes from its latent heat.
Marking scheme
- No: ice also takes in its latent heat of fusion, so it absorbs far more heat.
Question 4
5 marksA cylinder of oxygen at a health post in Mustang is at 27 °C. (Molar gas constant J/(mol K), molar mass of oxygen = 0.032 kg/mol.)
State Boyle's law and Charles's law. What is an ideal gas?
Answer
Boyle's law: at constant temperature, the volume of a fixed mass of gas is inversely proportional to its pressure, constant.
Charles's law: at constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature, (it changes by of its volume at 0 °C for each degree).
An ideal gas is one that obeys the gas laws, , exactly at all pressures and temperatures: its molecules have no volume of their own and exert no forces on one another except when they collide. Real gases behave nearly so at low pressure and high temperature.
Marking scheme
- Boyle's law stated (constant temperature, constant).
- Charles's law stated (constant pressure, ).
- Ideal gas: obeys exactly (no molecular volume or attraction).
Calculate the root mean square speed of the oxygen molecules. To what temperature must the gas be heated for this speed to double?
Answer
, so doubling it needs four times the absolute temperature: K, which is 927 °C.
Marking scheme
- m/s (with K).
- 1200 K (927 °C), since .
Question 5
5 marksSmriti fills a glass flask to the brim with 500 cm³ of mercury at 20 °C and heats it to 100 °C. (Real cubical expansivity of mercury = , cubical expansivity of glass = .)
Define the coefficient of cubical expansion (cubical expansivity) of a substance.
Answer
It is the increase in volume per unit original volume for each degree rise in temperature: .
Marking scheme
- Increase in volume per unit volume per degree rise in temperature.
How much mercury overflows from the flask?
Answer
The flask expands too, so only the apparent expansion overflows. , so
About 6.1 cm³ overflows.
Marking scheme
- The overflow is the apparent expansion: .
- K⁻¹.
- Overflow about 6.1 cm³.
Smriti says that if the flask were made of a material that expanded exactly as much as mercury, no mercury would overflow, and if it expanded more than mercury, the level would fall below the brim. Is she right? Give a reason.
Answer
Yes. The overflow is the apparent expansion, . If , the flask's space grows exactly as much as the mercury, and nothing overflows; if , the apparent expansion is negative, so the flask grows more than the mercury and the level falls.
Marking scheme
- Yes: overflow , zero when the expansivities are equal and negative (level falls) when the flask's is larger.
Question 6
5 marksKriti is designing an achromatic doublet: a convex lens of crown glass in contact with a concave lens of flint glass.
Define angular dispersion and dispersive power.
Answer
Angular dispersion is the angle between the violet and the red rays coming out of a prism: .
Dispersive power of a material is the ratio of the angular dispersion to the mean deviation (of yellow light): .
Marking scheme
- Angular dispersion: angle between the violet and red rays ().
- Dispersive power: angular dispersion ÷ mean deviation.
Why is a single lens not free from chromatic aberration?
Answer
A lens behaves like a set of small prisms. Its refractive index is larger for violet than for red, so violet light is focused closer to the lens than red: white light has no single focus, and the image has colored edges.
Marking scheme
- Different refractive index for each color, so the colors focus at different points.
The dispersive powers of the crown and flint glass are 0.020 and 0.040, and the convex lens has a focal length of 20 cm. Find the focal length the concave lens must have, and the focal length of the doublet.
Answer
For no chromatic aberration, :
The concave lens: focal length 40 cm (−40 cm); the doublet: a converging lens of 40 cm.
Marking scheme
- Concave lens cm.
- Doublet cm (converging).
OR
A ray of light in air meets a glass block at an angle of incidence of 30°. Bhumika measures the angle of refraction. (Refractive index of the glass = 1.5, speed of light in air = m/s.)
State the two laws of refraction of light.
Answer
- The incident ray, the refracted ray and the normal at the point of incidence all lie in the same plane.
- Snell's law: for a given pair of media and a given color of light, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant: .
Marking scheme
- First law: incident ray, refracted ray and normal in one plane.
- Second law (Snell's): constant for a pair of media.
A straight pencil dipped at a slant into a glass of water looks bent at the surface. Why?
Answer
Light from the part under the water bends away from the normal as it leaves the water, so that part seems to come from a point nearer the surface (it is apparently raised), and the pencil looks bent where it enters the water.
Marking scheme
- Refraction at the surface: the part under water appears raised, so the pencil looks bent.
Find the angle of refraction and the speed of light in the glass.
Answer
Marking scheme
- Angle of refraction about 19.5°.
- Speed in glass m/s.
Question 7
5 marksTwo small charges are fixed 40 cm apart in air: nC at A and nC at B. Simran studies the potential along the line between them. ( N m²/C².)
What is an equipotential surface? Why is no work done in moving a charge along one, and how are the field lines placed relative to it?
Answer
An equipotential surface is a surface on which every point is at the same potential.
Work done in moving a charge between two points is × their potential difference, which is zero on an equipotential surface, so no work is done. That means the field has no component along the surface: the field lines cross every equipotential surface at right angles.
Marking scheme
- Equipotential surface: all points at the same potential.
- Zero potential difference, so no work; field lines perpendicular to it.
Find the potential at the midpoint of AB and the work needed to bring a charge of nC there from infinity. Is there a point between A and B where the potential is zero? If so, find it.
Answer
At the midpoint, 0.20 m from each charge, the potentials add as scalars:
Work J.
Yes. At meters from A,
The potential is zero 30 cm from A (10 cm from B), though the field there is not zero.
Marking scheme
- Potential at the midpoint 270 V.
- Work J.
- Zero potential 30 cm from A.
Question 8
5 marksIn a hydrogen atom, the electron and the proton are about m apart. Mingma compares the electric and gravitational forces between them. ( C, N m²/C², N m²/kg², mass of electron = kg, mass of proton = kg.)
State Coulomb's law. What is the relative permittivity (dielectric constant) of a medium?
Answer
Coulomb's law: the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them, acting along the line joining them: .
The relative permittivity of a medium is the ratio of its permittivity to that of free space, : it tells how many times weaker the force between two charges is in the medium than in a vacuum.
Marking scheme
- Coulomb's law stated (∝ product of charges, ∝ 1/r², along the line joining them).
- Relative permittivity: , how many times weaker the force is in the medium.
Calculate the electric force and the gravitational force between the electron and the proton, and the ratio of the two. What does the ratio tell you about which force holds atoms together?
Answer
The electric force is about times stronger, so gravity plays no part inside the atom: atoms (and molecules and solids) are held together by electric forces. Gravity matters only for huge masses, which are nearly neutral.
Marking scheme
- Electric force N.
- Gravitational force N.
- Ratio about : electric forces hold atoms together.
Question 9
5 marksIn a circuit Sakshi builds, a 3.0 Ω and a 6.0 Ω resistor are joined in parallel, and the pair is joined in series with a 4.0 Ω resistor across a 12 V supply of negligible internal resistance.
Why are the lights and appliances in a house connected in parallel and not in series?
Answer
In parallel each gets the full mains voltage, and each can be switched on or off without affecting the others; in series they would share the voltage, and one switched off or failing would break the circuit for all.
Marking scheme
- Each gets the full voltage and works independently.
Find the total resistance and the current from the supply.
Answer
Marking scheme
- Total resistance 6.0 Ω.
- Current 2.0 A.
Find the power in each resistor. Which one turns the most electrical energy into heat, and why?
Answer
The 4.0 Ω resistor carries the whole 2.0 A: W, and the p.d. across it is 8.0 V. The pair has the remaining 4.0 V across it:
(Total 24 W . ✓)
The 4.0 Ω resistor: it carries the whole current, so it has the largest share of the p.d. Of the two in parallel, the smaller 3.0 Ω gets more power, since with the same p.d. is larger for smaller .
Marking scheme
- 16 W, 5.3 W and 2.7 W.
- The 4.0 Ω has the most (whole current, largest p.d.); in parallel the smaller resistor has more power.
Group CLong answers, each on one content area24 marks
Question 10
8 marksA bus leaves the Gongabu bus park from rest. It speeds up at 2.0 m/s² for 10 s, then runs at a steady speed for 30 s, then brakes evenly to a stop in 8.0 s. Its driver is Sushant.
What do the slope and the area of a velocity–time graph tell you? Use the graph of uniformly accelerated motion to derive and .
Answer
The slope of a velocity–time graph is the acceleration; the area under it is the displacement.
For a body whose velocity rises uniformly from to in time , the graph is a straight line. Its slope is the acceleration:
The area under it is a rectangle of height and width plus a triangle of base and height :
Marking scheme
- Slope gives acceleration; area gives displacement.
- from the slope.
- from the area (rectangle plus triangle).
Find the bus's top speed and the total distance it travels.
Answer
Top speed: m/s.
Distances (areas under the graph):
Top speed 20 m/s; total 780 m.
Marking scheme
- Top speed 20 m/s.
- Total distance 780 m.
At 20 m/s Sushant sees a cow on the road 70 m ahead. He takes 0.50 s to react, and then brakes as before. Does the bus stop in time? If not, find the deceleration it would need.
Answer
Braking as before: m/s².
While he reacts the bus keeps moving: m. Braking distance: m. Total m, more than 70 m: no, the bus doesn't stop in time.
To stop within the remaining m: m/s².
Marking scheme
- Reaction distance 10 m and braking distance 80 m (deceleration 2.5 m/s²).
- 90 m > 70 m, so it doesn't stop in time.
- Needed deceleration about 3.3 m/s² (over 60 m).
Question 11
8 marksA steel wire 3.0 m long with a cross-sectional area of 2.0 mm² holds a sign outside Prakriti's shop in Butwal. The sign pulls on it with 400 N. (Young's modulus of steel = Pa.)
Describe a stress–strain curve for a metal wire stretched until it breaks, naming the elastic limit and the yield point.
Answer
At first the graph is a straight line through the origin: stress is proportional to strain (Hooke's law), up to the proportional limit. A little beyond it is the elastic limit: up to here the wire goes back to its original length when the load is removed.
Past the elastic limit the wire is plastic: at the yield point it starts to stretch a lot for little extra stress and keeps a permanent extension. The stress then rises to its greatest value (the ultimate tensile stress), the wire narrows at one place, and it breaks at the breaking point.
Marking scheme
- Straight line (Hooke's law) up to the proportional limit; elastic limit: returns to its length up to here.
- Yield point: large plastic extension, permanent set, then ultimate stress and breaking.
Calculate the stress, the strain and the extension of the wire.
Answer
Marking scheme
- Stress Pa.
- Strain .
- Extension 3.0 mm.
Show that the elastic energy stored per unit volume of a stretched wire is , and find it for this wire. The Poisson's ratio of steel is 0.30: by what fraction does the wire's diameter decrease?
Answer
The energy stored is . The wire's volume is , so
For this wire: J/m³. (Check: J in a volume of m³, which is J/m³. ✓)
Lateral strain longitudinal strain : the diameter decreases by 0.03% of itself.
Marking scheme
- stress × strain.
- J/m³.
- Diameter decreases by of itself (0.03%).
OR
A forest guard in Bardiya fires a rifle of mass 4.0 kg in a training exercise. The bullet, of mass 20 g, leaves at 400 m/s.
State the principle of conservation of linear momentum, and use it to explain why a gun recoils.
Answer
Principle: if no external force acts on a system of bodies, its total linear momentum stays the same.
Before firing, the gun and bullet are at rest, so their total momentum is zero. The explosion is an internal force, so the total stays zero after firing: the bullet's forward momentum must be balanced by an equal backward momentum of the gun, which therefore moves back (recoils).
Marking scheme
- Total momentum constant when no external force acts.
- Total zero before and after firing, so the gun gets an equal and opposite momentum (recoil).
Calculate the recoil speed of the rifle and the kinetic energies of the bullet and the rifle.
Answer
The rifle recoils at 2.0 m/s.
Marking scheme
- Momentum equation, total zero.
- Recoil speed 2.0 m/s.
- Kinetic energies 1600 J and 8.0 J.
The bullet and the rifle have equal momenta. Explain why the bullet has 200 times as much kinetic energy. Why does the guard hold the rifle tightly against his shoulder? Find the recoil speed if he (60 kg) and the rifle move back together.
Answer
For equal momenta, is inversely proportional to the mass. The rifle is times heavier, so it has of the bullet's kinetic energy.
Held tightly, the rifle and his body recoil as one mass, kg:
The kick is much gentler, and the rifle doesn't gain speed before hitting his shoulder.
Marking scheme
- : with equal momenta, KE inversely proportional to mass (200 times).
- Held tight, the recoiling mass is 64 kg.
- Recoil speed about 0.13 m/s, so a gentle kick.
Question 12
8 marksThe energy levels of the hydrogen atom are eV. ( J s, m/s, 1 eV = J.)
Explain how the energy levels of single atoms become bands in a solid. How does band theory explain the difference between a conductor, an insulator and a semiconductor?
Answer
In a single atom an electron can have only certain energy levels. In a solid, billions of atoms are packed close together and their outer electrons affect one another, so each level splits into a huge number of levels very close together: an energy band. Between the bands are forbidden gaps.
- Conductor: the top band (the conduction band) is only partly full, or overlaps the valence band, so electrons can easily take a little energy and move: it conducts well.
- Insulator: the valence band is full and the conduction band empty, with a wide gap (5–10 eV) that electrons can't cross at room temperature: it doesn't conduct.
- Semiconductor: like an insulator, but with a small gap (about 1 eV), so at room temperature a few electrons jump into the conduction band, leaving holes: it conducts a little, and more when it is warmer.
Marking scheme
- Levels of many close atoms split into bands separated by forbidden gaps.
- Conductor: partly full band (or overlapping bands); insulator: full valence band and wide gap.
- Semiconductor: small gap (about 1 eV), a few electrons cross at room temperature.
An electron in a hydrogen atom drops from level 4 to level 2. Calculate the energy of the photon given out, in eV and in joules, and its wavelength.
Answer
2.55 eV, J, about 488 nm (blue-green light).
Marking scheme
- Photon energy 2.55 eV.
- J.
- Wavelength about 488 nm ( m).
Can a photon of this light lift an electron across the band gap of silicon (1.1 eV)? Of diamond (5.5 eV)? Use your answer to explain why diamond is transparent but silicon is not.
Answer
The photon has 2.55 eV: more than silicon's 1.1 eV, so it can lift an electron across the gap, and silicon absorbs the light. It is less than diamond's 5.5 eV, so it can't, and nothing in diamond takes in its energy.
No photon of visible light (about 1.6–3.1 eV) has the 5.5 eV needed, so diamond absorbs none of it and lets it through: it is transparent. Every visible photon has more than silicon's 1.1 eV, so silicon absorbs all visible light and is opaque.
Marking scheme
- Yes for silicon (2.55 > 1.1 eV); no for diamond (2.55 < 5.5 eV).
- Visible photons can't cross diamond's gap, so it is transparent; they all cross silicon's, so it absorbs them.
Your score
0 / 75
41 questions not marked yet
| Mechanics | – | Full marks 26 |
| Heat and Thermodynamics | – | Full marks 15 |
| Waves and Optics | – | Full marks 9 |
| Electricity and Magnetism | – | Full marks 16 |
| Modern Physics | – | Full marks 9 |
Marks lost, by unit
Mark a question to see your score here.
Found a mistake? Please tell us.
