← Grade 11 Physics Model Papers
Grade 11 Physics Model Paper 1
Full marks: 75Time: 3 hours
Answer every question; where a question has an OR question, answer either one.
A full practice run of NEB's Grade 11 Physics paper (Phy. 101): 75 marks in 3 hours. Group A is one question of 11 multiple-choice items; groups B and C have questions of two or three parts, with the marks of each part. Questions 2 and 6 in group B and Question 11 in group C have an OR question: answer either one. Take unless a question gives another value. Write your answers on paper as in the exam hall, then tap your choice in group A, open each other part's answer and give yourself the marks its scheme allows.
A practice paper by Science Playground, made to CDC’s Specification Grid 2077, Grade 11 Physics (Phy. 101). Not an official CDC or NEB paper; the real NEB Grade 11 exam may differ.
Write your answers on paper first. Then open each answer and its marking scheme, and give yourself one mark for each point you got. In multiple choice, your first choice counts.
Paper to print (PDF, 4 pages) Answer key and marking scheme
Group AMultiple choice11 marks
Question 1
11 × 1 = 11Choose the correct option for each of the following questions.
A student writes the mass of a coin as 0.004050 kg. How many significant figures does this reading have?
Pick an answer to see why.
The scalar (dot) product of two vectors and , neither of them zero, is zero. What is the angle between them?
Pick an answer to see why.
The velocity–time graph of a body is a straight line parallel to the time axis, above it. What does this show?
Pick an answer to see why.
A car goes round a roundabout at a steady 20 km/h. Which statement is true?
Pick an answer to see why.
The acceleration due to gravity at the Earth's surface is 9.8 m/s². What is it at a height above the surface equal to the Earth's radius?
Pick an answer to see why.
White light passes through a glass prism. Which color is deviated the most?
Pick an answer to see why.
An object is placed between a convex lens and its principal focus. What kind of image does the lens form?
Pick an answer to see why.
An object stands 20 cm in front of a concave mirror of focal length 15 cm. Where is the image, and how large is it?
Pick an answer to see why.
A glass prism has a refracting angle of 60°. Its angle of minimum deviation is 30°. What is the refractive index of the glass?
Pick an answer to see why.
A copper wire of resistance is drawn out evenly until it is twice as long, keeping its volume the same. What is its resistance now?
Pick an answer to see why.
To which family of fundamental particles do the electron and the neutrino belong?
Pick an answer to see why.
Group BShort answers, each on one content area40 marks
Question 2
5 marksBibek, a fielder in a school cricket match at Tundikhel, watches the batter hit a ball of mass 160 g. The ball reaches the bat at 30 m/s and leaves it at 20 m/s straight back along the same line. The bat is in contact with the ball for 0.010 s.
State Newton's second law of motion, and define impulse.
Answer
Newton's second law: the rate of change of momentum of a body is directly proportional to the net external force on it, and takes place in the direction of the force (; for a fixed mass, ).
Impulse is the product of a force and the time for which it acts, ; it equals the change in momentum it produces. Its unit is N s (the same as kg m/s).
Marking scheme
- Second law: rate of change of momentum proportional to (equal to) the net force, in the force's direction.
- Impulse = force × time (= change in momentum).
Calculate the average force exerted by the bat on the ball.
Answer
Take the direction the ball leaves the bat as positive. Then m/s and m/s, and
The average force is 800 N, in the direction the ball leaves the bat. (Using instead of forgets that velocity is a vector.)
Marking scheme
- Change in momentum 8.0 kg m/s, with the reversal of direction taken into account.
- Average force 800 N, towards the direction the ball leaves the bat.
Bibek says the bat must push the ball harder than the ball pushes the bat, because the ball turns back and the bat doesn't. Is he right? Give a reason.
Answer
No. By Newton's third law the ball pushes the bat with a force equal and opposite to the bat's push on the ball, about 800 N, for the same 0.010 s. The bat hardly turns back because the batter's arms hold it and push it forwards, and with them it is far heavier than the ball; the forces between bat and ball are still equal.
Marking scheme
- No: by Newton's third law the forces are equal and opposite (about 800 N each); the bat is held and heavier, so its motion changes little.
OR
Pemba is fitting a steel wire to lift loads at a building site in Lukla. A trial wire is 2.0 m long and has a cross-sectional area of 1.0 mm². He hangs a load of 20 kg from it and measures an extension of 1.96 mm.
State Hooke's law, and define Young's modulus.
Answer
Hooke's law: within the elastic limit, the extension of a body is directly proportional to the force (load) stretching it (equivalently, stress is proportional to strain).
Young's modulus is the ratio of the normal (tensile) stress to the longitudinal strain it produces, within the elastic limit: .
Marking scheme
- Hooke's law: extension proportional to load (stress ∝ strain), within the elastic limit.
- Young's modulus = normal stress ÷ longitudinal strain, within the elastic limit.
Calculate the stress and the strain in the wire, and the Young's modulus of its steel.
Answer
Stress about Pa, strain , Young's modulus Pa.
Marking scheme
- Stress Pa and strain (load in newtons, area in m², lengths in m).
- Young's modulus Pa.
For the real hoist, Pemba chooses a wire of four times the cross-sectional area for the same loads. Give a reason.
Answer
With four times the area, the same load gives a quarter of the stress, so the wire stays well within its elastic limit (it stretches less and does not stay stretched, weaken or break), giving a margin of safety for jerks and heavier loads.
Marking scheme
- Same load on a larger area: smaller stress, well within the elastic limit (safer, less extension).
Question 3
5 marksAayusha uses a 2.0 kW electric kettle to heat 1.2 kg of water from 20 °C to 100 °C in her home in Bhaktapur. (Specific heat capacity of water = 4200 J/(kg K).)
Hot-water bags are filled with water rather than another liquid. Why?
Answer
Water has a very high specific heat capacity, so a kilogram of it stores a great deal of heat for each degree, and gives that heat out slowly as it cools: the bag stays warm for a long time.
Marking scheme
- High specific heat capacity: stores much heat per degree and releases it over a long time.
Calculate the time the kettle takes to heat the water to 100 °C, assuming no heat is lost.
Answer
Power is energy per second, so
About 202 s, or 3.4 minutes.
Marking scheme
- with K.
- J.
- s (about 3.4 min).
Her cousin in Namche Bazaar (3440 m) heats the same amount of water from 20 °C with the same kettle. Will his water start boiling sooner or later than hers? Give a reason.
Answer
Sooner. The air pressure at Namche is lower, so water boils there at about 89 °C instead of 100 °C. The water needs to be heated through only about 69 K instead of 80 K, so less heat, and less time, is needed.
Marking scheme
- Sooner, because the lower pressure lowers the boiling point (about 89 °C), so less heat is needed.
Question 4
5 marksSonam's family runs a lodge in Jomsom. On a winter evening the inside of a glass window is at 15 °C and the outside at −5 °C. The glass is 1.5 m² in area and 4.0 mm thick. (Thermal conductivity of glass = 0.80 W/(m K).)
Define temperature gradient and thermal conductivity, and write the SI unit of thermal conductivity.
Answer
Temperature gradient is the change of temperature per unit length along the direction of heat flow, (unit K/m).
Thermal conductivity of a material is the rate of flow of heat through unit area of a slab of it, per unit temperature gradient across it, in the steady state: .
Its SI unit is W/(m K) (W m⁻¹ K⁻¹).
Marking scheme
- Temperature gradient: change of temperature per unit length.
- Thermal conductivity: rate of heat flow per unit area per unit temperature gradient.
- Unit W/(m K).
Calculate the rate at which heat is conducted through the window. The family plans to replace it with two panes of glass with a layer of still air between them. Will this help? Give a reason.
Answer
About 6 kW flows out through one window (in practice less, since thin layers of air on each side of the glass add to the resistance to heat flow).
Yes. Still air is a very poor conductor of heat (its thermal conductivity is about 30 times smaller than glass's), so the air layer greatly lowers the rate of heat loss.
Marking scheme
- Rate of heat flow 6000 W (temperature difference 20 K, thickness in meters).
- Yes: still air is a bad conductor, so the double pane cuts the heat loss.
Question 5
5 marksEarly one morning in Dang, Abinash measures the pressure of the air in a car tyre as Pa (absolute pressure) at 17 °C. After a long drive the air in the tyre is at 46 °C. Take the volume of the tyre as constant.
State the pressure law (Gay-Lussac's law).
Answer
At constant volume, the pressure of a fixed mass of gas is directly proportional to its absolute temperature, . (Equivalently, it rises by of its pressure at 0 °C for each degree of heating.)
Marking scheme
- At constant volume, pressure of a fixed mass of gas ∝ absolute temperature.
Calculate the pressure of the air in the tyre after the drive.
Answer
The temperatures must be absolute: K and K.
The pressure rises to Pa.
Marking scheme
- Temperatures in kelvin: 290 K and 319 K.
- (pressure law at constant volume).
- Pa.
Use the kinetic theory of gases to explain why the pressure rises.
Answer
The mean kinetic energy of the molecules is proportional to the absolute temperature, so in the hotter tyre they move faster: they strike the walls more often and each strike gives a larger change of momentum, so the force per unit area on the walls, the pressure, is greater.
Marking scheme
- Higher temperature, faster molecules: more frequent and harder collisions with the walls, so greater pressure.
Question 6
5 marksThe internet reaches Nepal through optical fibers, thin strands of glass along which light is guided by total internal reflection. The glass of one fiber's core has a refractive index of 1.5.
Define critical angle, and state the two conditions for total internal reflection.
Answer
The critical angle is the angle of incidence in the denser medium for which the angle of refraction in the rarer medium is 90°.
Total internal reflection happens when (i) light travels from an optically denser medium towards a rarer one, and (ii) the angle of incidence is greater than the critical angle.
Marking scheme
- Critical angle: the angle of incidence in the denser medium that gives a refraction angle of 90°.
- Both conditions: denser to rarer, and angle of incidence greater than the critical angle.
A diamond sparkles far more than a piece of glass cut in the same shape. Why?
Answer
Diamond's refractive index (2.42) is much higher than glass's, so its critical angle is small (about 24°). Most light inside it meets the faces at more than the critical angle and is totally reflected many times before it escapes through a few faces, so those faces flash brightly.
Marking scheme
- High refractive index, small critical angle: light is totally reflected again and again inside and comes out in bright flashes.
Calculate the critical angle for light going from the fiber's glass into air.
Answer
The critical angle is about 42°.
Marking scheme
- .
- .
OR
Nischal, who is long-sighted, finds that his eye doctor's trial frame holds two thin lenses in contact: a convex lens of focal length 25 cm and a concave lens of focal length 100 cm.
Define the power of a lens, and write its SI unit.
Answer
The power of a lens is the reciprocal of its focal length in meters, ; it measures how strongly the lens converges or diverges light. Its SI unit is the diopter (D), the power of a lens of focal length 1 m.
Marking scheme
- Power = 1/f (f in meters), the converging or diverging ability.
- Unit: diopter (D), i.e. m⁻¹.
Why is a concave lens called a diverging lens?
Answer
It is thinner in the middle than at its edges, so a parallel beam passing through it is bent away from the principal axis and spreads out, as if coming from its focus.
Marking scheme
- A parallel beam spreads out (bent away from the axis) after passing through it.
Calculate the power and the focal length of the combination, and say whether it is converging or diverging.
Answer
With a concave lens's focal length negative:
Power +3.0 D, focal length about 33 cm: the combination is converging.
Marking scheme
- D.
- cm, converging (positive power).
Question 7
5 marksIn a physics practical, Aisha rubs a glass rod with silk, and then studies two small charged spheres: at A and at B, 30 cm apart in air.
Explain how the glass rod becomes positively charged when rubbed with silk, and what charge the silk gets.
Answer
Rubbing brings the two surfaces into close contact, and electrons are transferred from the glass to the silk (glass holds its electrons less tightly). The glass is left with fewer electrons than protons, so it is positive; the silk gains the same number of electrons and becomes negative by the same amount, since charge is neither created nor destroyed.
Marking scheme
- Electrons move from the glass to the silk, leaving the glass positive.
- The silk becomes negative, with an equal and opposite charge (charge is conserved).
Aisha wants to place a third small charge on the line AB where the net electric force on it is zero. Find where she should put it. Does the answer depend on the size or sign of the third charge? Explain.
Answer
Between A and B the forces from the two charges on the third charge point in opposite directions, so they can cancel there. Let the point be meters from A. Equal sizes of force:
Taking square roots, , so and m.
20 cm from A (10 cm from B). Outside AB the two forces point the same way and can't cancel.
No: cancels from both sides. A positive charge there is pushed equally by both; a negative one is pulled equally by both. Either way the forces balance at the same point.
Marking scheme
- Equates the two Coulomb forces with distances and (the point between the charges).
- m: 20 cm from the 4.0 μC charge.
- Independent of the third charge: cancels, for either sign.
Question 8
5 marksThe flash of Yugin's camera is powered by a 150 μF capacitor, which is charged to 300 V and then discharged through the flash tube in about 1.5 ms.
Define capacitance, and write its SI unit.
Answer
The capacitance of a capacitor is the charge stored on either plate per unit potential difference between the plates, . Its SI unit is the farad (F), one coulomb per volt.
Marking scheme
- Capacitance = charge stored per unit potential difference, .
- Unit farad (F) = C/V.
Calculate the charge stored, the energy stored, and the average power delivered to the flash tube. Why does the camera use a capacitor instead of taking the energy straight from its battery?
Answer
A small battery cannot deliver thousands of watts. It charges the capacitor slowly over a few seconds, and the capacitor then gives out the stored energy in a very short time, at a very high power.
Marking scheme
- C and J.
- Average power 4.5 kW.
- The capacitor stores energy slowly and releases it quickly, at a power the battery alone can't give.
Question 9
5 marksIn a model of an old cathode-ray tube in Mijash's school lab, two parallel metal plates 2.0 cm apart have a potential difference of 500 V between them. (Charge of an electron = C, mass = kg.)
The electron volt is called a unit of energy, not of potential. Why?
Answer
One electron volt is the kinetic energy a particle with charge gains when it moves through a potential difference of 1 V: J. It is charge times potential difference, which is work, so it measures energy.
Marking scheme
- It is the energy (work = ) gained by a charge through 1 V, J.
Calculate the electric field strength between the plates and the force on an electron there.
Answer
For a uniform field, :
towards the positive plate.
Marking scheme
- V/m (N/C).
- N.
An electron starts from rest at the negative plate. With what speed does it reach the positive plate?
Answer
The work done by the field is , and it all becomes kinetic energy:
About m/s. (The same answer comes from with .)
Marking scheme
- J.
- m/s.
Group CLong answers, each on one content area24 marks
Question 10
8 marksAt a fun fair in Kathmandu, Sandhya's bumper car (with her in it, 200 kg) moves at 3.0 m/s into the back of her brother's car (with him, 300 kg), which is at rest. The two cars lock together and move on as one.
Distinguish between elastic and inelastic collisions. Which of the two quantities, momentum and kinetic energy, is conserved in each?
Answer
In an elastic collision the bodies bounce apart and the total kinetic energy after the collision equals that before; none is turned into other forms (collisions of gas molecules, and nearly so of steel or ivory balls).
In an inelastic collision some kinetic energy is turned into other forms (heat, sound, the work of bending), so the total kinetic energy after is less. When the bodies stick together the collision is perfectly inelastic and the loss is the greatest possible.
Momentum is conserved in both kinds, as long as no external force acts; kinetic energy only in an elastic one.
Marking scheme
- Elastic: kinetic energy conserved.
- Inelastic: kinetic energy not conserved (changed to heat, sound, deformation); sticking together is perfectly inelastic.
- Momentum conserved in both (no external force).
Calculate the speed of the two cars just after the collision.
Answer
Momentum is conserved (the friction from the floor is small during the short collision):
1.2 m/s, in the direction Sandhya was moving.
Marking scheme
- Conservation of momentum written for the two cars.
- m/s.
How much kinetic energy is lost in the collision, and what fraction of the original is it? Show that this fraction is equal to , and say where the lost energy goes.
Answer
540 J is lost, which is of the original.
In general, , so the kinetic energy after is . The fraction kept is , so the fraction lost is . ✓
The lost energy goes into heat and sound and into the work of squashing the rubber bumpers and the riders' bodies; none of it is destroyed.
Marking scheme
- Kinetic energy lost 540 J, 60% of the original.
- Shows the fraction lost is .
- The energy goes to heat, sound and deformation (energy is conserved).
Question 11
8 marksUjwal's family watches TV through a dish pointed at a geostationary satellite. ( N m²/kg², mass of the Earth = kg, radius of the Earth = 6400 km.)
Why must a geostationary satellite go round above the equator, from west to east?
Answer
To seem at rest over one place, the satellite must keep pace with the turning Earth. It must therefore go round the same way the Earth turns, west to east, with the same period, 24 hours.
Its orbit must be centered on the Earth's center, since gravity points there, and only an orbit in the plane of the equator stays over the same latitude; an orbit tilted to the equator would carry it north and south of it each day.
Marking scheme
- West to east with a 24-hour period, to keep pace with the Earth's rotation.
- In the equator's plane: any orbit is centered on the Earth's center, and only an equatorial one stays over the same point.
Calculate the radius of the orbit and the height of the satellite above the ground.
Answer
Gravity provides the centripetal force:
With s:
Radius about 42,300 km; height about 35,900 km.
Marking scheme
- , giving .
- m (with s).
- m (about 36,000 km).
Ujwal's friend says the satellite stays up because there is no gravity so far from the Earth. Calculate the gravitational field strength at the satellite, and use it to judge the claim.
Answer
The claim is wrong. Gravity there is weaker, about of its value at the ground, but not zero. That pull is exactly what keeps the satellite on its circle: it supplies the centripetal force ( km/s gives m/s², the same). With no gravity, the satellite would fly off in a straight line. It stays up because it moves sideways fast enough that, as it falls, the Earth curves away beneath it.
Marking scheme
- N/kg (not zero).
- Gravity provides the centripetal force (), so the claim is wrong.
- Without gravity it would move off in a straight line; it is falling round the Earth all the time.
OR
Prarthana kicks a football from the ground at 19.6 m/s at 30° above the horizontal on the ground of her school in Pokhara. Ignore air resistance.
Explain why the horizontal component of the ball's velocity stays the same while the vertical component changes.
Answer
With no air resistance, the only force on the ball in flight is its weight, which acts vertically downwards. There is no horizontal force, so there is no horizontal acceleration and the horizontal velocity stays the same. The vertical velocity changes at the steady rate : it falls from to zero at the top, then grows downwards.
Marking scheme
- No horizontal force (weight is vertical), so horizontal velocity constant.
- Vertical acceleration downward changes the vertical velocity.
Calculate the ball's time of flight, its greatest height and its horizontal range.
Answer
m/s and m/s.
2.0 s, 4.9 m and about 34 m.
Marking scheme
- Time of flight 2.0 s.
- Greatest height 4.9 m.
- Range about 33.9 m.
Her coach says that a kick at 45° at the same speed would go farthest, and that a kick at 60° would land at the same spot as her 30° kick. Check both statements with calculations, and say which of the 30° and 60° kicks stays in the air longer.
Answer
is greatest when , at : m, more than 33.9 m. The first statement is true.
At 60°, , so m, the same as at 30°: angles that add up to 90° give the same range. The second is true too.
At 60°, s against 2.0 s: the 60° kick stays up longer (it goes higher, 14.7 m), while the 30° kick travels faster sideways.
Marking scheme
- 45° gives the maximum range, 39.2 m.
- 60° gives the same range as 30°, 33.9 m ().
- The 60° kick is in the air longer (3.46 s against 2.0 s).
Question 12
8 marksThe nucleus of carbon-12 has 6 protons and 6 neutrons. Its mass is 11.99671 u. (Mass of a proton = 1.00728 u, mass of a neutron = 1.00867 u, 1 u = 931.5 MeV/c².)
Explain what is meant by the mass defect and the binding energy of a nucleus. Why is the binding energy per nucleon, rather than the total binding energy, used to compare how stable nuclei are?
Answer
The mass defect is the amount by which the mass of a nucleus is less than the total mass of its separate protons and neutrons.
The binding energy is the energy needed to pull a nucleus apart into its separate nucleons (equally, the energy given out when they come together to form it). It is the energy equivalent of the mass defect, .
A big nucleus has a big total binding energy just because it has many nucleons. The binding energy per nucleon is the energy needed, on average, to remove one nucleon, so it tells how tightly each nucleon is held: the higher it is, the more stable the nucleus.
Marking scheme
- Mass defect: mass of the separate nucleons minus the mass of the nucleus.
- Binding energy: energy to separate the nucleus into its nucleons, .
- Per nucleon shows how tightly each nucleon is bound (total grows with the number of nucleons).
Calculate the mass defect, the binding energy and the binding energy per nucleon of carbon-12.
Answer
Marking scheme
- Mass defect 0.09899 u.
- Binding energy 92.2 MeV.
- 7.68 MeV per nucleon.
The binding energy per nucleon is about 7.6 MeV for uranium-235 and about 8.8 MeV for iron-56. Explain why energy is released both when a uranium nucleus splits (fission) and when light nuclei such as hydrogen join (fusion).
Answer
The binding energy per nucleon is highest, about 8.8 MeV, for nuclei near iron-56, and lower for both very heavy and very light nuclei. When uranium splits into two middle-sized nuclei, and when light nuclei join into a heavier one, the products sit nearer that peak: their nucleons are more tightly bound. The total binding energy rises, so the total mass falls, and the mass lost appears as energy, .
Marking scheme
- Binding energy per nucleon peaks near iron-56 and is lower for heavy and light nuclei.
- Both fission and fusion move towards the peak: more tightly bound products, mass lost, energy released.
Your score
0 / 75
41 questions not marked yet
| Mechanics | – | Full marks 26 |
| Heat and Thermodynamics | – | Full marks 15 |
| Waves and Optics | – | Full marks 9 |
| Electricity and Magnetism | – | Full marks 16 |
| Modern Physics | – | Full marks 9 |
Marks lost, by unit
Mark a question to see your score here.
Found a mistake? Please tell us.
