Skip to content

← Grade 11 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

16 questions

Unit 14 · Hydrocarbons

Printable PDFs

B. Short answer questions

1.

How many isomers does the hydrocarbon C₄H₁₀ have? Write all of them and their IUPAC names.

Answer

Two. By the short-cut, 2⁴⁻⁴ + 1 = 2.

  • CH₃–CH₂–CH₂–CH₃: butane (n-butane), the straight chain.
  • CH₃–CH(CH₃)–CH₃: 2-methylpropane (isobutane), a chain of three carbons with a methyl group on the middle one.

They are chain isomers.

2.

Suggest a reason why the peroxide effect is seen with HBr but not with HCl or HI. Why is Wurtz’s reaction not a good method for preparing alkanes with an odd number of carbon atoms? Explain with examples.

Answer

The peroxide effect is a free-radical chain reaction. The peroxide makes radicals that pull H off HX; the halogen atom adds to the alkene; the carbon radical formed then takes an H from another HX. Both chain steps must be fast and give out energy for the chain to run. With HBr both are: H–Br (366 kJ/mol) is weak enough for the radical to break, and Br• is reactive enough to add to the C=C. With HCl the H–Cl bond (431 kJ/mol) is too strong: the carbon radical can’t take H from it, so the chain stops. With HI the H–I bond breaks easily, but the iodine atom is too unreactive to add to the C=C; iodine atoms join as I₂ instead. So HCl and HI add by the ionic route, following Markovnikov’s rule, even with peroxide. Example: CHX3CH=CHX2+HBr→peroxideCHX3CHX2CHX2Br \ce{CH3CH=CH2 + HBr ->[peroxide] CH3CH2CH2Br} (1-bromopropane), but CHX3CH=CHX2+HCl→peroxideCHX3CHClCHX3 \ce{CH3CH=CH2 + HCl ->[peroxide] CH3CHClCH3} (2-chloropropane).

Wurtz’s reaction joins two alkyl groups, so one alkyl halide gives an alkane with twice its carbons, always an even number: 2 CHX3CHX2Cl+2 Na→dry etherCHX3CHX2CHX2CHX3+2 NaCl \ce{2CH3CH2Cl + 2Na ->[dry ether] CH3CH2CH2CH3 + 2NaCl} . To get propane, CH₃Cl and CH₃CH₂Cl would have to react together, but then any two alkyl groups can join, and three products form at once:

CHX3Cl+CX2HX5Cl+2 Na→CHX3−CX2HX5+2 NaCl (propane) \ce{CH3Cl + C2H5Cl + 2Na -> CH3-C2H5 + 2NaCl} \text{ (propane)}

with CH₃–CH₃ (ethane) and C₂H₅–C₂H₅ (butane). The mixture has to be separated and the yield of propane is low, so the method isn’t used for odd-numbered alkanes.

3.

Give an example of each: a. Wurtz’s reaction; b. Kolbe’s electrolysis; c. decarboxylation; d. Markovnikov’s rule; e. dehydrohalogenation.

Answer

a. 2 CHX3Cl+2 Na→dry etherCHX3−CHX3+2 NaCl \ce{2CH3Cl + 2Na ->[dry ether] CH3-CH3 + 2NaCl} (ethane from chloromethane).

b. 2 CHX3COONa+2 HX2O→electrolysisCHX3−CHX3+2 COX2+HX2+2 NaOH \ce{2CH3COONa + 2H2O ->[electrolysis] CH3-CH3 + 2CO2 + H2 + 2NaOH} : ethane and CO₂ at the anode, hydrogen at the cathode.

c. CHX3COONa+NaOH→ΔCaOCHX4+NaX2COX3 \ce{CH3COONa + NaOH ->[CaO][\Delta] CH4 + Na2CO3} (methane from sodium ethanoate).

d. CHX3−CH=CHX2+HBr→CHX3−CHBr−CHX3 \ce{CH3-CH=CH2 + HBr -> CH3-CHBr-CH3} : the H goes to the CH₂ carbon, which has more hydrogens, giving 2-bromopropane.

e. CHX3−CHX2−Br+KOH(alc ⋅ )→ΔCHX2=CHX2+KBr+HX2O \ce{CH3-CH2-Br + KOH(alc.) ->[\Delta] CH2=CH2 + KBr + H2O} .

4.

Identify P, Q, R, S and T. The reactant, condition and product of each reaction are in one row.

Reactant Condition Product
P alc. KOH propene
but-1-ene Q propanal and methanal
sodium propanoate NaOH + CaO, heat R
propyne S propanone
T peroxide 1-bromopropane

The textbook prints 1-chloropropane as T’s product, but the peroxide effect works only with HBr: propene and HCl give 2-chloropropane even with a peroxide, so the book’s row doesn’t work. It is answered here with 1-bromopropane.

Answer
  • P is 1-chloropropane (or 2-chloropropane, or a bromopropane): CHX3CHX2CHX2Cl+KOH(alc ⋅ )→CHX3CH=CHX2+KCl+HX2O \ce{CH3CH2CH2Cl + KOH(alc.) -> CH3CH=CH2 + KCl + H2O} .
  • Q is ozone, then zinc and water (ozonolysis): CHX3CHX2CH=CHX2→2 ⋅ Zn,HX2O1 ⋅ OX3CHX3CHX2CHO+HCHO \ce{CH3CH2CH=CH2 ->[1. O3][2. Zn, H2O] CH3CH2CHO + HCHO} .
  • R is ethane: CHX3CHX2COONa+NaOH→ΔCaOCHX3CHX3+NaX2COX3 \ce{CH3CH2COONa + NaOH ->[CaO][\Delta] CH3CH3 + Na2CO3} .
  • S is water with 1% HgSO₄ and dilute H₂SO₄: CHX3C≡CH+HX2O→HgSOX4,dil. HX2SOX4CHX3COCHX3 \ce{CH3C#CH + H2O ->[HgSO4, dil{.} H2SO4] CH3COCH3} .
  • T is propene and HBr: CHX3CH=CHX2+HBr→peroxideCHX3CHX2CHX2Br \ce{CH3CH=CH2 + HBr ->[peroxide] CH3CH2CH2Br} (anti-Markovnikov).
5.

Convert methane into ethyne.

Answer

Chlorinate methane to chloroform, then heat the chloroform with silver powder:

CHX4+3 ClX2→UV lightCHClX3+3 HCl \ce{CH4 + 3Cl2 ->[UV light] CHCl3 + 3HCl}
2 CHClX3+6 Ag→ΔHC≡CH+6 AgCl \ce{2CHCl3 + 6Ag ->[\Delta] HC#CH + 6AgCl}

(Another route: methane → chloromethane (Cl₂, light) → ethane (Wurtz) → chloroethane (Cl₂, light) → ethene (alc. KOH) → 1,2-dibromoethane (Br₂) → ethyne (alc. KOH, then NaNH₂).)

6.

Two containers hold but-2-ene and octane. How can you tell them apart by a chemical test? Write the equation.

Answer

Shake a little of each with bromine water (or bromine in CCl₄). But-2-ene decolorizes the reddish-brown bromine at once, because it adds across the double bond:

CHX3−CH=CH−CHX3+BrX2→CHX3−CHBr−CHBr−CHX3 \ce{CH3-CH=CH-CH3 + Br2 -> CH3-CHBr-CHBr-CH3}

(2,3-dibromobutane, colorless). Octane, saturated, leaves the color unchanged (in the dark).

Or use Baeyer’s reagent, cold dilute alkaline KMnO₄: but-2-ene turns its purple color colorless with a brown precipitate of MnO₂, giving butane-2,3-diol; octane leaves it purple.

7.

Distinguish between, with an example of each: a. Wurtz’s reaction and the decarboxylation reaction; b. Markovnikov’s rule and the anti-Markovnikov rule; c. olefins and paraffins.

Answer

a.

Wurtz’s reaction Decarboxylation
An alkyl halide is heated with sodium in dry ether. The sodium salt of a carboxylic acid is heated with soda lime.
Two alkyl groups join: the alkane has twice the carbons. CO₂ is removed: the alkane has one carbon fewer.
Gives only even-numbered, symmetrical alkanes; can’t give methane. Can give methane and odd- or even-numbered alkanes.
2 CX2HX5Cl+2 Na→CX4HX10+2 NaCl \ce{2C2H5Cl + 2Na -> C4H10 + 2NaCl} CX2HX5COONa+NaOH→CX2HX6+NaX2COX3 \ce{C2H5COONa + NaOH -> C2H6 + Na2CO3}

b.

Markovnikov’s rule Anti-Markovnikov (peroxide effect)
The H of HX goes to the double-bond carbon with more hydrogens. The H goes to the carbon with fewer hydrogens; Br to the one with more.
Works for HCl, HBr, HI, H₂O, H₂SO₄. Only HBr, and only with an organic peroxide.
Ionic mechanism, through the more stable carbocation. Free-radical mechanism, through the more stable radical.
propene + HBr → 2-bromopropane propene + HBr (peroxide) → 1-bromopropane

c.

Olefins (alkenes) Paraffins (alkanes)
Unsaturated: a C=C double bond. Saturated: only single bonds.
CₙH₂ₙ; sp² carbons in the double bond. CₙH₂ₙ₊₂; all carbons sp³.
Reactive: give addition reactions. Unreactive: give substitution reactions only.
Decolorize bromine water and Baeyer’s reagent. Don’t.
ethene, CH₂=CH₂ ethane, CH₃–CH₃
8.

What products are obtained by ozonolysis of: a. ethene; b. propene; c. but-2-ene; d. 2-methylbut-2-ene; e. 2,3-dimethylbut-2-ene?

Answer

Cut the C=C and put =O on each carbon (O₃, then Zn and water):

a. CH₂=CH₂ → 2 HCHO, methanal (two molecules).

b. CH₃CH=CH₂ → CH₃CHO + HCHO, ethanal and methanal.

c. CH₃CH=CHCH₃ → 2 CH₃CHO, ethanal (two molecules).

d. (CH₃)₂C=CHCH₃ → CH₃COCH₃ + CH₃CHO, propanone and ethanal:

CH3CHCCH3CH32-methylbut-2-ene1. O32. Zn, H2OCH3CHOethanal+CH3CCH3OpropanoneCH3CHCCH3CH32-methylbut-2-ene1. O32. Zn, H2OCH3CHOethanal+CH3CCH3Opropanone
Figure 14.55

e. (CH₃)₂C=C(CH₃)₂ → 2 CH₃COCH₃, propanone (two molecules):

CH3CCH3CCH3CH32,3-dimethylbut-2-ene1. O32. Zn, H2OCH3CCH3Opropanone+CH3CCH3OpropanoneCH3CCH3CCH3CH32,3-dimethylbut-2-ene1. O32. Zn, H2OCH3CCH3Opropanone+CH3CCH3Opropanone
Figure 14.56
9.

Addition reactions are impossible for alkanes but possible for alkenes and alkynes, while substitution reactions are possible for alkanes. Explain with an example of each.

Answer

In an alkane every carbon already has four single (σ) bonds: it is saturated, so no atom can be added without first breaking a bond. A reagent can join only by replacing a hydrogen, and only when light or heat breaks the bonds: CHX4+ClX2→UV lightCHX3Cl+HCl \ce{CH4 + Cl2 ->[UV light] CH3Cl + HCl} .

An alkene or alkyne has π bonds, which are weaker than σ bonds, and their electrons lie above and below the molecule, open to attack. The π bond breaks and each carbon takes on a new atom: addition. Ethene: CHX2=CHX2+BrX2→CHX2Br−CHX2Br \ce{CH2=CH2 + Br2 -> CH2Br-CH2Br} . Ethyne, with two π bonds, adds twice: HC≡CH+2 HX2→ΔNiCHX3−CHX3 \ce{HC#CH + 2H2 ->[Ni][\Delta] CH3-CH3} .

10.

Among CH₃CH₃, CH₂=CH₂ and CH≡CH, which is the most acidic? Explain with examples.

Answer

Ethyne, CH≡CH. Its carbons are sp hybridized, with 50% s character, against 33% (sp², ethene) and 25% (sp³, ethane). An orbital with more s character holds its electrons closer to the nucleus, so the sp carbon is the most electronegative: it pulls the C–H bond’s electrons towards itself, the H is lost as H⁺ most easily, and the acetylide ion left, HC≡C⁻, is the most stable (pKa about 25, against 44 for ethene and 50 for ethane).

Examples, which ethane and ethene don’t give:

  • with sodium: 2 HC≡CH+2 Na→liq. NHX32 HC≡CNa+HX2 \ce{2HC#CH + 2Na ->[liq{.} NH3] 2HC#CNa + H2} ;
  • with Tollens’ reagent: HC≡CH+2 [Ag(NHX3)X2]OH→AgC≡CAg↓+2 HX2O+4 NHX3 \ce{HC#CH + 2[Ag(NH3)2]OH -> AgC#CAg v + 2H2O + 4NH3} , a white precipitate;
  • with ammoniacal Cu₂Cl₂: HC≡CH+CuX2ClX2+2 NHX4OH→CuC≡CCu↓+2 NHX4Cl+2 HX2O \ce{HC#CH + Cu2Cl2 + 2NH4OH -> CuC#CCu v + 2NH4Cl + 2H2O} , a red precipitate.
11.

Draw the orbital structures of methane, ethene and ethyne. Give the number and nature of the bonds between the carbon atoms in each.

Answer

Methane has only one carbon, so no C–C bond: four C–H σ bonds from sp³–1s overlap, tetrahedral, 109.5°.

CHHHHsp³109.5°
Figure 14.57

Ethene: between the carbons two bonds, one σ (sp²–sp² overlap) and one π (sideways overlap of the two 2p orbitals); four C–H σ bonds; planar, 120°.

CCHHHHπσ bonds in one plane
Figure 14.58

Ethyne: between the carbons three bonds, one σ (sp–sp) and two π (from two pairs of 2p orbitals at right angles); two C–H σ bonds; linear, 180°.

CCHHππσ bonds along one line
Figure 14.59

C. Long answer questions

1.

Alkanes are saturated hydrocarbons. How do we confirm this? Explain with examples. Alkanes are less acidic than alkynes: explain this statement. What products would you obtain when ethane undergoes nitration and sulphonation? Explain with suitable examples.

Answer

Saturated. An alkane decolorizes neither bromine water (in the dark) nor Baeyer’s reagent, and it adds nothing: hydrogen over nickel leaves it unchanged. With chlorine in light it reacts only by substitution: CHX3CHX3+ClX2→UV lightCHX3CHX2Cl+HCl \ce{CH3CH3 + Cl2 ->[UV light] CH3CH2Cl + HCl} . Ethene, by contrast, decolorizes both (CHX2=CHX2+BrX2→CHX2BrCHX2Br \ce{CH2=CH2 + Br2 -> CH2BrCH2Br} ). Its formula, CₙH₂ₙ₊₂, is also the most hydrogen a chain of n carbons can hold, and every carbon is sp³ with four σ bonds.

Less acidic than alkynes. An alkane’s carbons are sp³ (25% s character); a terminal alkyne’s are sp (50%). The sp carbon holds electrons closer to its nucleus, so its C–H bond is more polarized and its anion more stable: ethyne (pKa about 25) loses H⁺ to sodium or ammoniacal silver nitrate, 2 HC≡CH+2 Na→liq. NHX32 HC≡CNa+HX2 \ce{2HC#CH + 2Na ->[liq{.} NH3] 2HC#CNa + H2} , while ethane (pKa about 50) reacts with neither.

Nitration. Ethane and nitric acid vapor at 400–500 °C give nitroethane: CHX3CHX3+HNOX3→400−500 X∘X22∘CCHX3CHX2NOX2+HX2O \ce{CH3CH3 + HNO3 ->[400-500 \,^\circ C] CH3CH2NO2 + H2O} , with some nitromethane, since at that temperature the C–C bond breaks too.

Sulphonation. With fuming sulphuric acid and heat a hydrogen is replaced by –SO₃H, giving ethanesulphonic acid: CHX3CHX3+HX2SOX4→ΔCHX3CHX2SOX3H+HX2O \ce{CH3CH3 + H2SO4 ->[\Delta] CH3CH2SO3H + H2O} . In practice ethane hardly reacts; sulphonation works well for alkanes from hexane up.

2.

Compare any three physical and any five chemical properties of alkanes, alkenes and alkynes.

Answer

Physical properties

Property Alkanes Alkenes Alkynes
State (room temperature) C₁–C₄ gases, C₅–C₁₇ liquids, then solids C₂–C₄ gases, C₅ to about C₁₇–C₁₈ liquids, then solids ethyne, propyne and but-1-yne gases, then liquids to about C₁₇–C₁₈, then solids
Solubility insoluble in water; soluble in non-polar solvents the same slightly soluble in water (ethyne); very soluble in organic solvents
Polarity non-polar ethene non-polar; unsymmetrical ones slightly polar (propene 0.37 D) ethyne non-polar; unsymmetrical ones slightly polar (propyne 0.78 D)
Hybridization sp³ sp² sp

Chemical properties

Property Alkanes Alkenes Alkynes
Typical reaction substitution addition addition (two molecules)
Bromine water not decolorized decolorized decolorized (twice the bromine)
Baeyer’s reagent stays purple decolorized, brown MnO₂ decolorized
Hydrogen, Ni no reaction gives alkane gives alkene, then alkane
HBr no reaction adds (Markovnikov; anti with peroxide) adds twice, giving a gem-dibromide
Water no reaction adds with acid, giving an alcohol adds with HgSO₄/H₂SO₄, giving an aldehyde or ketone
Acidic H no no terminal alkynes: Na, Ag⁺ and Cu⁺ acetylides
Combustion clean blue flame more luminous flame very sooty in air (bright, hot with oxygen)
3.

Study the table, in which the reactant, condition and product of each reaction are given. Write the structure and name of P, Q, R, S, T, U, V and W.

Reactant Condition Product
P Na, dry ether, heat CH₃CH₂CH₂CH₃
CH₂=CH₂ Q CH₃–CH₃
CH₃–CH₂Cl alc. KOH R
S HgSO₄/H⁺ CH₃CHO
CH₃CH₂OH T CH₂=CH₂
CH≡CH Na, liquid NH₃ U
V HCl CH₃CHClCH₃
W NaOH/CaO CH₄

The textbook prints U’s condition as “Na/NH₄OH”, but in ammonia solution sodium reacts with the water, and any acetylide ion formed takes H⁺ back from water at once (ethyne, pKa 25, is a far weaker acid than water, 15.7), so the book’s condition doesn’t work. It is answered here with sodium in liquid ammonia, with no water present.

Answer
  • P: chloroethane, CH₃CH₂Cl (or bromoethane): 2 CHX3CHX2Cl+2 Na→dry etherCHX3CHX2CHX2CHX3+2 NaCl \ce{2CH3CH2Cl + 2Na ->[dry ether] CH3CH2CH2CH3 + 2NaCl} .
  • Q: H₂ with nickel (heated), Pd or Pt: CHX2=CHX2+HX2→ΔNiCHX3−CHX3 \ce{CH2=CH2 + H2 ->[Ni][\Delta] CH3-CH3} .
  • R: ethene, CH₂=CH₂: CHX3CHX2Cl+KOH(alc ⋅ )→CHX2=CHX2+KCl+HX2O \ce{CH3CH2Cl + KOH(alc.) -> CH2=CH2 + KCl + H2O} .
  • S: ethyne, HC≡CH (with water): HC≡CH+HX2O→HgSOX4,HX+CHX3CHO \ce{HC#CH + H2O ->[HgSO4, H+] CH3CHO} .
  • T: concentrated H₂SO₄ at 170 °C (or Al₂O₃ at about 350 °C): CHX3CHX2OH→170 X∘X22∘Cconc. HX2SOX4CHX2=CHX2+HX2O \ce{CH3CH2OH ->[conc{.} H2SO4][170 \,^\circ C] CH2=CH2 + H2O} .
  • U: sodium acetylide, HC≡C–Na (monosodium acetylide): 2 HC≡CH+2 Na→2 HC≡CNa+HX2 \ce{2HC#CH + 2Na -> 2HC#CNa + H2} .
  • V: propene, CH₃CH=CH₂: CHX3CH=CHX2+HCl→CHX3CHClCHX3 \ce{CH3CH=CH2 + HCl -> CH3CHClCH3} (Markovnikov).
  • W: sodium ethanoate, CH₃COONa: CHX3COONa+NaOH→ΔCaOCHX4+NaX2COX3 \ce{CH3COONa + NaOH ->[CaO][\Delta] CH4 + Na2CO3} .
4.

Convert methane into ethene.

Answer

CHX4+ClX2→UV lightCHX3Cl+HCl \ce{CH4 + Cl2 ->[UV light] CH3Cl + HCl}
2 CHX3Cl+2 Na→dry etherCHX3−CHX3+2 NaCl \ce{2CH3Cl + 2Na ->[dry ether] CH3-CH3 + 2NaCl}
CHX3−CHX3+ClX2→UV lightCHX3CHX2Cl+HCl \ce{CH3-CH3 + Cl2 ->[UV light] CH3CH2Cl + HCl}
CHX3CHX2Cl+KOH(alc ⋅ )→ΔCHX2=CHX2+KCl+HX2O \ce{CH3CH2Cl + KOH(alc.) ->[\Delta] CH2=CH2 + KCl + H2O}

Methane → chloromethane → ethane (Wurtz) → chloroethane → ethene (dehydrohalogenation). (Or: methane → chloroform → ethyne with silver, then ethyne → ethene with H₂ over Lindlar’s catalyst.)

5.

What happens when:

  • a.ethane is treated with iodine?
  • b.ethane is treated with concentrated nitric acid?
  • c.ethane is treated with concentrated sulphuric acid?
  • d.chloroethane is heated with sodium in dry ether?
  • e.ethylene is heated with hydrogen in the presence of nickel?
  • f.ethane is burned in air?
  • g.sodium acetate is heated with soda lime?
  • h.chloroethane is heated with zinc and HCl?
Answer

a. Iodination is reversible: CHX3CHX3+IX2⇌CHX3CHX2I+HI \ce{CH3CH3 + I2 <=> CH3CH2I + HI} . The HI formed is a strong reducing agent and turns iodoethane back into ethane, so almost no product is left. An oxidizing agent such as iodic acid (HIO₃) or nitric acid is added to destroy the HI: 5 HI+HIOX3→3 IX2+3 HX2O \ce{5HI + HIO3 -> 3I2 + 3H2O} . Then iodoethane is formed.

b. On heating the vapors to 400–500 °C, nitroethane forms: CHX3CHX3+HNOX3→CHX3CHX2NOX2+HX2O \ce{CH3CH3 + HNO3 -> CH3CH2NO2 + H2O} (some nitromethane too). At room temperature there is no reaction.

c. With fuming sulphuric acid and heat, ethanesulphonic acid: CHX3CHX3+HX2SOX4→CHX3CHX2SOX3H+HX2O \ce{CH3CH3 + H2SO4 -> CH3CH2SO3H + H2O} ; in practice ethane reacts very little.

d. Wurtz’s reaction gives butane: 2 CHX3CHX2Cl+2 Na→dry etherCHX3CHX2CHX2CHX3+2 NaCl \ce{2CH3CH2Cl + 2Na ->[dry ether] CH3CH2CH2CH3 + 2NaCl} .

e. Hydrogenation gives ethane: CHX2=CHX2+HX2→ΔNiCHX3−CHX3 \ce{CH2=CH2 + H2 ->[Ni][\Delta] CH3-CH3} .

f. It burns to carbon dioxide and water with much heat: 2 CX2HX6+7 OX2→4 COX2+6 HX2O \ce{2C2H6 + 7O2 -> 4CO2 + 6H2O} ; in too little air, carbon monoxide and soot too.

g. Decarboxylation gives methane: CHX3COONa+NaOH→ΔCaOCHX4+NaX2COX3 \ce{CH3COONa + NaOH ->[CaO][\Delta] CH4 + Na2CO3} .

h. Nascent hydrogen reduces it to ethane: CHX3CHX2Cl+2 [H]→Zn+HClCHX3CHX3+HCl \ce{CH3CH2Cl + 2[H] ->[Zn + HCl] CH3CH3 + HCl} .