Skip to content

← Grade 11 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

22 questions

Unit 13 · Fundamental Principles of Organic Chemistry

Printable PDFs

B. Short answer questions

1.

Explain the following terms: a. prefix, b. word root, c. primary suffix, d. secondary suffix, e. substituent.

Answer
  • a.Prefix: the part of a name written before the word root that names the substituents (alkyl groups, halogens, –NO₂, and functional groups that aren’t the principal one), with their locants: 2-chloropropane, 3-methylpentane.
  • b.Word root: the part that gives the number of carbon atoms in the parent chain: meth (1), eth (2), prop (3), but (4), pent (5)…
  • c.Primary suffix: written after the word root, it shows whether the carbon–carbon bonds are all single (-ane), include a double bond (-ene) or a triple bond (-yne): propane, propene, propyne.
  • d.Secondary suffix: written after the primary suffix, it names the principal functional group: -ol (alcohol), -al (aldehyde), -one (ketone), -oic acid (carboxylic acid): ethanol, propanoic acid.
  • e.Substituent: an atom or group of atoms that has taken the place of a hydrogen atom of the parent chain, such as –CH₃ or –Cl in 2-chloro-3-methylpentane.
2.

Write an example of a compound with each of these functional groups: a. –NHCO–, b. –COOH, c. –CHO, d. –O–, e. –CO–O–CO–.

Answer
  • a.–NHCO– (an amide link with a group on the nitrogen): N-methylethanamide, CH₃–CO–NH–CH₃. The same link joins the amino acids in proteins (the peptide bond) and the units of nylon.
  • b.–COOH: ethanoic acid, CH₃COOH.
  • c.–CHO: ethanal, CH₃CHO.
  • d.–O–: methoxymethane, CH₃–O–CH₃.
  • e.–CO–O–CO–: ethanoic anhydride, CH₃–CO–O–CO–CH₃.
3.

Write the chemistry of detecting the nitrogen in urea.

Answer

Urea, (NH₂)₂CO, contains carbon and nitrogen. Fused with sodium, they form sodium cyanide:
Na+C+N→fusionNaCN \ce{Na + C + N ->[\text{fusion}] NaCN}
The fused mass is broken in water, boiled and filtered to give the sodium extract. It is boiled with freshly made iron(II) sulphate (in the alkaline extract iron(II) hydroxide forms first):
FeSOX4+2 NaOH→Fe(OH)X2+NaX2SOX4 \ce{FeSO4 + 2NaOH -> Fe(OH)2 + Na2SO4}
Fe(OH)X2+2 NaCN→Fe(CN)X2+2 NaOH \ce{Fe(OH)2 + 2NaCN -> Fe(CN)2 + 2NaOH}
Fe(CN)X2+4 NaCN→NaX4[Fe(CN)X6] \ce{Fe(CN)2 + 4NaCN -> Na4[Fe(CN)6]}
Then iron(III) chloride and concentrated hydrochloric acid are added:
3 NaX4[Fe(CN)X6]+4 FeClX3→FeX4[Fe(CN)X6]X3+12 NaCl \ce{3Na4[Fe(CN)6] + 4FeCl3 -> Fe4[Fe(CN)6]3 + 12NaCl}
A Prussian blue color or precipitate shows that urea contains nitrogen. (The acid dissolves the leftover hydroxide: Fe(OH)X2+2 HCl→FeClX2+2 HX2O \ce{Fe(OH)2 + 2HCl -> FeCl2 + 2H2O} .)

4.
  • a.Write the differences between a nucleophile and an electrophile.
  • b.Write the differences between chain isomers and position isomers.
Answer

a.

Nucleophile Electrophile
Rich in electrons (“nucleus-loving”). Short of electrons (“electron-loving”).
Gives an electron pair to make a new bond. Accepts an electron pair to make a new bond.
A negative ion or a neutral molecule with a lone pair (OH⁻, CN⁻, NH₃, H₂O). A positive ion or a neutral molecule with an incomplete octet (NO₂⁺, CH₃⁺, BF₃, AlCl₃).
Attacks an electron-poor (δ+) carbon. Attacks an electron-rich place (a C=C, a benzene ring).
A Lewis base. A Lewis acid.

b.

Chain isomers Position isomers
Differ in the carbon chain: straight or branched, a longer or shorter parent chain. Have the same carbon chain.
A functional group, if any, is in the same position. A functional group, substituent or multiple bond is in a different position.
Butane and 2-methylpropane (C₄H₁₀). Propan-1-ol and propan-2-ol (C₃H₈O).
5.

Explain how a sodium extract is prepared and why it is needed. Write the complete reactions for detecting nitrogen as a foreign element.

Answer

Preparation: a small piece of dry, freshly cut sodium is melted in an ignition tube; a little of the compound is added; the tube is heated gently, then strongly to red heat; the red-hot tube is plunged into about 10 mL of distilled water in a china dish (behind a screen); the pieces are ground, the mixture is boiled for a minute or two and filtered. The filtrate is the sodium extract.

Why it is needed: in an organic compound N, S and the halogens are held by covalent bonds and don’t give ions in water, while the tests (Prussian blue, nitroprusside, silver nitrate) are tests for ions. Sodium breaks those bonds and turns the elements into the water-soluble ionic salts NaCN, Na₂S and NaX.

Reactions for nitrogen:
Na+C+N→fusionNaCN \ce{Na + C + N ->[\text{fusion}] NaCN}
FeSOX4+2 NaOH→Fe(OH)X2+NaX2SOX4 \ce{FeSO4 + 2NaOH -> Fe(OH)2 + Na2SO4}
Fe(OH)X2+2 NaCN→Fe(CN)X2+2 NaOH \ce{Fe(OH)2 + 2NaCN -> Fe(CN)2 + 2NaOH}
Fe(CN)X2+4 NaCN→NaX4[Fe(CN)X6] \ce{Fe(CN)2 + 4NaCN -> Na4[Fe(CN)6]}
3 NaX4[Fe(CN)X6]+4 FeClX3→FeX4[Fe(CN)X6]X3+12 NaCl \ce{3Na4[Fe(CN)6] + 4FeCl3 -> Fe4[Fe(CN)6]3 + 12NaCl}
Prussian blue shows nitrogen.

6.

Explain the process and reactions for detecting the foreign elements in the compound shown above, thiourea, (NH₂)₂CS.

Answer

Thiourea contains nitrogen and sulphur. Its sodium extract is prepared as usual (question 5).

With too little sodium, N and S stay together as thiocyanate:
Na+C+N+S→fusionNaSCN \ce{Na + C + N + S ->[\text{fusion}] NaSCN}
In the nitrogen test, iron(III) chloride then gives a blood red color, which shows both N and S:
3 NaSCN+FeClX3→Fe(SCN)X3+3 NaCl \ce{3NaSCN + FeCl3 -> Fe(SCN)3 + 3NaCl}

With plenty of sodium, the thiocyanate is broken up, NaSCN+2 Na→NaCN+NaX2S \ce{NaSCN + 2Na -> NaCN + Na2S} , and each element gives its own test:

  • nitrogen: boiled with iron(II) sulphate, then iron(III) chloride and hydrochloric acid: Prussian blue, Fe₄[Fe(CN)₆]₃;
  • sulphur: with sodium nitroprusside, a violet color, NaX2S+NaX2[Fe(CN)X5NO]→NaX4[Fe(CN)X5NOS] \ce{Na2S + Na2[Fe(CN)5NO] -> Na4[Fe(CN)5NOS]} ; or, acidified with ethanoic acid, with lead acetate, a black precipitate, NaX2S+(CHX3COO)X2Pb→PbS+2 CHX3COONa \ce{Na2S + (CH3COO)2Pb -> PbS + 2CH3COONa} .
7.

How many isomers are possible for the molecular formula C₅H₁₂? Write their structures and IUPAC names.

Answer

Three:

  • CH₃–CH₂–CH₂–CH₂–CH₃, pentane;
  • CH₃–CH(CH₃)–CH₂–CH₃, 2-methylbutane;
  • C(CH₃)₄, 2,2-dimethylpropane.

All three are chain isomers (Figure 13.34, Figure 13.35).

8.

Explain structural isomerism, with an example of each kind.

Answer

Structural isomers have the same molecular formula but different structures: their atoms are joined in a different order.

  • a.Chain isomerism: a different carbon chain. Butane, CH₃CH₂CH₂CH₃, and 2-methylpropane, (CH₃)₃CH.
  • b.Position isomerism: the same chain, a group or multiple bond in a different position. Propan-1-ol, CH₃CH₂CH₂OH, and propan-2-ol, CH₃CH(OH)CH₃.
  • c.Functional isomerism: different functional groups. Ethanol, CH₃CH₂OH, and methoxymethane, CH₃OCH₃.
  • d.Metamerism: the same functional group with different alkyl groups on its two sides. Ethoxyethane, C₂H₅OC₂H₅, and 1-methoxypropane, CH₃OCH₂CH₂CH₃.
  • e.Tautomerism: two functional isomers turned into each other by a hydrogen moving within the molecule, in equilibrium. Propanone, CH₃COCH₃, ⇌ prop-1-en-2-ol, CH₂=C(OH)CH₃.
9.

What are optical isomers? Explain, with an example, why a chiral carbon is needed for optical activity.

Answer

Optical isomers are stereoisomers that turn the plane of plane-polarized light by the same angle in opposite directions, one clockwise (+), the other anticlockwise (−). They are mirror images that can’t be laid on each other (enantiomers).

A molecule turns polarized light only if it is not the same as its mirror image. In the compounds of this unit, that happens when a carbon holds four different groups, a chiral carbon. Butan-2-ol, CH₃–CH(OH)–CH₂CH₃, has one: its carbon 2 holds H, OH, CH₃ and C₂H₅, so it has two forms, (+)- and (−)-butan-2-ol, and each is optically active. Propan-2-ol, CH₃–CH(OH)–CH₃, has no chiral carbon (two CH₃ on the middle carbon): its mirror image is the same molecule, and it is optically inactive.

(A chiral carbon isn’t quite a guarantee: meso-tartaric acid has two, yet is inactive, because its two halves are mirror images and cancel each other.)

10.

Explain each of these terms, with an example: homolytic fission, nucleophile, free radical, inductive effect, electrophile.

Answer
  • Homolytic fission: a covalent bond breaks evenly, each atom taking one of the two electrons, giving free radicals. Cl−Cl→hν2 ClX ∙  \ce{Cl-Cl ->[h\nu] 2Cl^.}
  • Nucleophile: an electron-rich reagent that gives an electron pair to an electron-poor carbon. OH⁻, which attacks bromoethane to give ethanol.
  • Free radical: an atom or group with an unpaired electron, neutral and very reactive. The methyl radical, CH₃•.
  • Inductive effect: the permanent shift of σ-bond electrons along a chain, caused by an electronegative atom (−I) or an electron-releasing group (+I), fading after about three bonds. Chlorine’s −I effect makes chloroethanoic acid stronger than ethanoic acid.
  • Electrophile: an electron-poor reagent that accepts an electron pair from an electron-rich part of a molecule. The nitronium ion, NO₂⁺, which attacks a benzene ring.
11.

What is Lassaigne’s test? Explain how chlorine is detected in an organic compound such as chloroform, CHCl₃.

Answer

Lassaigne’s test detects nitrogen, sulphur and halogens in an organic compound: the compound is fused with sodium, which turns them into the ionic salts NaCN, Na₂S and NaX; these are dissolved in water (the sodium extract) and tested.

Chlorine: fusion gives sodium chloride, Na+Cl→fusionNaCl \ce{Na + Cl ->[\text{fusion}] NaCl} . The sodium extract is acidified with dilute nitric acid and boiled (to drive off any cyanide or sulphide as HCN and H₂S), then silver nitrate is added:
NaCl+AgNOX3→AgCl↓+NaNOX3 \ce{NaCl + AgNO3 -> AgCl v + NaNO3}
A white, curdy precipitate that dissolves easily in dilute ammonia shows chlorine:
AgCl+2 NHX4OH→[Ag(NHX3)X2]Cl+2 HX2O \ce{AgCl + 2NH4OH -> [Ag(NH3)2]Cl + 2H2O}

12.

What are geometrical isomers? Explain the E–Z system of naming them.

Answer

Geometrical isomers are stereoisomers that differ in the arrangement of groups about a C=C double bond (or a ring), which can’t rotate; each carbon of the double bond must hold two different groups. In the cis isomer two like groups are on the same side (cis-but-2-ene), in the trans isomer on opposite sides.

E–Z system, for any such alkene: on each carbon of the C=C, the two groups are ranked by the atomic number of the atom joined to the carbon (if those are equal, by the atoms one step further out). If the two higher-ranked groups are on the same side, the isomer is Z (zusammen, together); on opposite sides, E (entgegen, opposite). In 3-methylpent-2-ene, CH₃–CH=C(CH₃)–CH₂CH₃, the CH₃ outranks H on carbon 2 and the ethyl outranks the methyl on carbon 3; the isomer with CH₃ and ethyl on the same side is (Z), the other (E) (Figure 13.52).

13.

Name the elements in the compound shown above question 3, urea. Which of them is not one of the fundamental elements of organic compounds? How is it confirmed by Lassaigne’s test?

Answer

Urea, (NH₂)₂CO, contains carbon, hydrogen, oxygen and nitrogen. Carbon and hydrogen (and very often oxygen) are the elements that organic compounds are built from; nitrogen is the foreign element.

It is confirmed by the nitrogen test: the sodium extract, boiled with freshly made iron(II) sulphate and then treated with iron(III) chloride and concentrated hydrochloric acid, gives a Prussian blue color, Fe₄[Fe(CN)₆]₃ (the reactions in question 3).

14.

Which property of benzene do the structures in Figure 13.72 show? Write any two features of such structures. Then write any two differences between the +R and −R effects.

Answer

They show resonance: benzene drawn as two resonance (Kekulé) structures joined by ↔. (The real molecule, the hybrid of the two, is often drawn as a hexagon with a circle inside.)

Features: i. the structures have the same arrangement of atoms and differ only in where the π electrons are; ii. the real molecule is neither of them but a hybrid, more stable than either (the resonance energy), with all six C–C bonds equal, 139 pm. (Also: they are joined by ↔, and the molecule doesn’t switch between them.)

+R effect −R effect
The group releases electrons into the π system. The group withdraws electrons from the π system.
The group has a lone pair on the atom joined to the ring (–OH, –NH₂, –OR). The group has a multiple bond to an electronegative atom (–NO₂, –CHO, –CN).
The ring’s electron density rises at ortho and para. The ring’s electron density falls at ortho and para.
15.

Why is the IUPAC system better than the common system of naming organic compounds?

Answer
  • i.Each IUPAC name belongs to one compound, and its structure can be drawn from the name; a common name (acetone, isobutyl alcohol) has to be learned and says little or nothing about the structure.
  • ii.It works for any compound, however large or new, by the same rules; common names exist only for a few familiar compounds, and run out quickly (there are 75 decanes).
  • iii.It is used everywhere in the world, so chemists of every language mean the same compound; common names differ from place to place, and one compound may have several.
  • iv.It shows the family and the functional group at once by the suffix (-ol, -al, -one, -oic acid), so it helps predict how the compound behaves.

C. Long answer questions

1.

Write the IUPAC names of the compounds a to h shown above: a. C₂H₅–CH(OH)–CH₃; b. CH₃–CH(CH₃)–CH₂–CH₂–CH₃; c. CH₃–CF(C₂H₅)–CH₂–CCl(C₂H₅)–CH₃; d. CH₃–CH(OH)–CH₂–CO–CH₃; e. CH₃–CH(CH₃)–CH(CH(CH₃)₂)–(CH₂)₄–CH₃; f. (CH₃)₃C–CHCl–CH₃; g. CH₃–CHBr–CO–CH(CH₃)–CH₃; h. (CH₃)₂CH–COOH.

Answer
  • a.CH₃CH₂–CH(OH)–CH₃: four carbons, –OH on carbon 2: butan-2-ol.
  • b.CH₃–CH(CH₃)–CH₂–CH₂–CH₃: five carbons, a methyl on carbon 2: 2-methylpentane.
  • c.CH₃–CF(C₂H₅)–CH₂–CCl(C₂H₅)–CH₃: the longest chain runs through both ethyl groups, seven carbons, with F and a methyl on one carbon and Cl and a methyl on the other. The locants are 3, 3, 5, 5 from either end, so chloro, first in the alphabet, gets 3: 3-chloro-5-fluoro-3,5-dimethylheptane.
  • d.CH₃–CH(OH)–CH₂–CO–CH₃: the ketone outranks the alcohol, so the name ends in -one; five carbons, numbered to give C=O the lower number, 2: 4-hydroxypentan-2-one.
  • e.CH₃–CH(CH₃)–CH(CH(CH₃)₂)–(CH₂)₄–CH₃: eight carbons, a methyl on carbon 2 and an isopropyl group on carbon 3: 3-isopropyl-2-methyloctane (by the 2013 rules, which name isopropyl propan-2-yl: 2-methyl-3-(propan-2-yl)octane).
  • f.(CH₃)₃C–CHCl–CH₃: four carbons; from the left the locants are 2, 2, 3, from the right 2, 3, 3, and the first difference (2 against 3) chooses the left: 3-chloro-2,2-dimethylbutane.
  • g.CH₃–CHBr–CO–CH(CH₃)–CH₃: five carbons, C=O on carbon 3 either way, bromine and methyl on 2 and 4; bromo comes first in the alphabet, so it gets 2: 2-bromo-4-methylpentan-3-one.
  • h.(CH₃)₂CH–COOH: three carbons counting the –COOH carbon, a methyl on carbon 2: 2-methylpropanoic acid.
2.

What is Lassaigne’s test? You are given three unlabeled organic compounds. One contains sulphur and another bromine. How would you find which is which? Write a laboratory report with the procedure and conclusion.

Answer

Lassaigne’s test detects N, S and halogens in an organic compound by fusing it with sodium, which turns them into the ionic salts NaCN, Na₂S and NaX, and testing the water extract for those ions.

Aim: to find which of three compounds, P, Q and R, contains sulphur and which bromine.

Apparatus and chemicals: ignition tubes, tongs, burner, china dish, mortar and pestle, filter paper, test tubes; sodium, distilled water, sodium nitroprusside, ethanoic acid, lead acetate, dilute nitric acid, silver nitrate, dilute and concentrated ammonia.

Procedure:

  1. Prepare a sodium extract of each compound separately: a small piece of dry sodium fused in an ignition tube, the compound added, heated to red heat, plunged into 10 mL of distilled water, ground, boiled and filtered (behind a screen).
  2. Sulphur test: to 1 mL of each extract, add a few drops of sodium nitroprusside. To another 1 mL, add ethanoic acid and lead acetate.
  3. Halogen test: acidify 2 mL of each extract with dilute nitric acid and boil (in a fume cupboard); cool and add silver nitrate; add dilute ammonia to any precipitate.

Observations (for example):

Test P Q R
Sodium nitroprusside violet no change no change
Lead acetate black precipitate no change no change
Silver nitrate no precipitate pale yellow precipitate, hardly soluble in dilute ammonia no precipitate

Reactions:
2 Na+S→NaX2SNaX2S+NaX2[Fe(CN)X5NO]→NaX4[Fe(CN)X5NOS] \ce{2Na + S -> Na2S} \qquad \ce{Na2S + Na2[Fe(CN)5NO] -> Na4[Fe(CN)5NOS]}
NaX2S+(CHX3COO)X2Pb→PbS↓+2 CHX3COONa \ce{Na2S + (CH3COO)2Pb -> PbS v + 2CH3COONa}
Na+Br→NaBrNaBr+AgNOX3→AgBr↓+NaNOX3 \ce{Na + Br -> NaBr} \qquad \ce{NaBr + AgNO3 -> AgBr v + NaNO3}

Conclusion: P contains sulphur (violet color, black PbS), Q contains bromine (pale yellow AgBr), and R contains neither.

Precautions: only a tiny piece of sodium, kept away from water; a safety screen when the hot tube is broken; nitric acid boiling in a fume cupboard (HCN and H₂S are poisonous).

3.

Who coined the term isomer? Explain the types of isomerism and their subtypes, with an example of each.

Answer

The Swedish chemist Jöns Jacob Berzelius, in 1830.

Isomerism is the existence of compounds with the same molecular formula but different structures or arrangements in space. There are two types (Figure 13.32).

A. Structural isomerism: the atoms are joined in a different order.

  • Chain: butane and 2-methylpropane.
  • Position: but-1-ene and but-2-ene; propan-1-ol and propan-2-ol.
  • Functional: ethanol and methoxymethane.
  • Metamerism: ethoxyethane and 1-methoxypropane.
  • Tautomerism: propanone ⇌ prop-1-en-2-ol (keto–enol).

B. Stereoisomerism: the same order of atoms, a different arrangement in space.

  • Geometrical: cis- and trans-but-2-ene, about a C=C that can’t rotate.
  • Optical: (+)- and (−)-lactic acid, mirror images with a chiral carbon, turning polarized light opposite ways.
4.
  • a.Write any two differences between optically active and optically inactive organic compounds.
  • b.How is the positive inductive effect different from the negative inductive effect? Explain with examples.
  • c.In the two bond fissions of A–B shown in Figure 13.60, what makes the products different? Give an example of each.
Answer

a.

Optically active Optically inactive
Turns the plane of plane-polarized light (+ or −). Doesn’t turn it.
Its molecule isn’t superimposable on its mirror image (usually a chiral carbon). Its molecule is the same as its mirror image (no chiral carbon, a meso compound), or it is a racemic mixture.
Butan-2-ol, lactic acid. Propan-2-ol, meso-tartaric acid.

b. In the +I effect a group (an alkyl group, –CH₃, –C₂H₅, –C(CH₃)₃) pushes σ electrons towards the carbon it is joined to, more than H does; in the −I effect a group (–NO₂, –Cl, –COOH) pulls them away. A +I group weakens an acid (propanoic acid, pKₐ 4.87, is weaker than ethanoic acid, 4.76); a −I group strengthens it (chloroethanoic acid, 2.87).

c. What differs is how the bonding pair is shared out:

  • In heterolytic fission (the full arrow, a pair moving) both electrons go to the more electronegative atom, giving ions, A⁺ and B⁻ when B is the more electronegative: CHX3−Cl→CHX3X++ClX− \ce{CH3-Cl -> CH3+ + Cl-} . It happens in polar bonds and polar solvents.
  • In homolytic fission (two half-headed arrows, one electron each) each atom keeps one electron, giving free radicals A• and B•: Cl−Cl→hν2 ClX ∙  \ce{Cl-Cl ->[h\nu] 2Cl^.} . It happens in non-polar bonds, with heat or light.
5.
  • a.Draw the resonance structures of benzene.
  • b.How is geometrical isomerism different from optical isomerism? Explain with an example of each.
  • c.Is the compound shown above, CH₃–CH₂–CCl(CH₃)–CH₃, optically active? Explain.
Answer

a. The two Kekulé structures, joined by ↔, as in Figure 13.72; the hybrid is a hexagon with a circle.

b.

Geometrical isomerism Optical isomerism
Comes from restricted rotation about a C=C (or a ring). Comes from a molecule that isn’t superimposable on its mirror image (a chiral carbon).
The isomers are not mirror images. The isomers are mirror images (enantiomers).
They have different physical properties (boiling point, polarity). They have the same physical properties except the direction they turn polarized light.
cis- and trans-but-2-ene. (+)- and (−)-lactic acid.

c. No. It is 2-chloro-2-methylbutane, and its carbon 2 holds Cl, C₂H₅ and two CH₃ groups. With two identical groups that carbon isn’t chiral, the molecule is the same as its mirror image, and it is optically inactive. (Some books mark this carbon as chiral, which is a mistake. Its isomers 2-chlorobutane and 1-chloro-2-methylbutane do have a carbon with four different groups, and are optically active.)

6.

Write the rules for naming monofunctional organic compounds, with examples.

Answer
  1. Find the functional group and the class of compound; it gives the secondary suffix (–OH -ol, –CHO -al, >C=O -one, –COOH -oic acid, –CONH₂ -amide, –NH₂ -amine). Halogens, –NO₂ and –OR are named as prefixes.
  2. Choose the parent chain: the longest chain that contains the functional group (and any C=C or C≡C). For –CHO, –COOH, –CONH₂, –CN and –COCl, the group’s own carbon is part of the chain. Its length gives the word root.
  3. Number the chain so that the functional group gets the lowest number. A group that can only be at the end (–CHO, –COOH) is carbon 1, and its number isn’t written. Example: CH₃CH(OH)CH₂CH₃ is butan-2-ol, not butan-3-ol.
  4. Add the suffixes: primary (-ane, -ene, -yne) then secondary, the e of -ane dropped before a vowel: propanol, butanone, ethanoic acid; kept before a consonant: ethanedioic acid.
  5. Name the substituents as prefixes with their locants, in alphabetical order, with di, tri…: 3-methylbutan-2-ol, 2-chloropropanoic acid.
  6. Special classes: an ether is an alkoxyalkane (CH₃OC₂H₅, methoxyethane); an ester is alkyl alkanoate (CH₃COOC₂H₅, ethyl ethanoate); an acid anhydride is alkanoic anhydride (ethanoic anhydride).
7.

Write all the steps of Lassaigne’s test for sulphur.

Answer
  1. Put a small, dry, freshly cut piece of sodium in a clean ignition tube held with tongs, and melt it gently.
  2. Add a little of the organic compound.
  3. Heat gently, then strongly until the tube is red hot.
  4. Plunge the red-hot tube into about 10 mL of distilled water in a china dish, behind a safety screen.
  5. Grind the pieces, boil for a minute or two and filter. The filtrate is the sodium extract; the sulphur is in it as Na₂S: 2 Na+S→NaX2S \ce{2Na + S -> Na2S} .
  6. Nitroprusside test: to 1 mL of the extract add a few drops of freshly made sodium nitroprusside. A violet color shows sulphur: NaX2S+NaX2[Fe(CN)X5NO]→NaX4[Fe(CN)X5NOS] \ce{Na2S + Na2[Fe(CN)5NO] -> Na4[Fe(CN)5NOS]} .
  7. Lead acetate test: acidify another 1 mL with ethanoic acid and add lead acetate. A black precipitate of lead sulphide shows sulphur: NaX2S+(CHX3COO)X2Pb→PbS↓+2 CHX3COONa \ce{Na2S + (CH3COO)2Pb -> PbS v + 2CH3COONa} .