Exam practice
Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.
11 questions
Unit 15 · Aromatic Hydrocarbons
Printable PDFs
- Study notes 2 pages
- Worksheet 4 pages Answer key
B. Short answer questions
Write the physical and chemical characteristics of benzene.
Answer
Physical: a colorless, volatile liquid with a sweet smell; boils at 80.1 °C, melts at 5.5 °C; density 0.877 g/cm³, lighter than water; immiscible with water but soluble in organic solvents, and a good solvent itself; highly inflammable; toxic and carcinogenic.
Chemical:
- i.Burns with a sooty flame: .
- ii.Adds only under vigorous conditions: ; .
- iii.Gives electrophilic substitution: nitration, sulphonation, halogenation and Friedel–Crafts alkylation.
iv. Does not decolorize bromine water or Baeyer’s reagent (cold, dilute KMnO₄).
Arrange the following compounds in a sensible order of reactant and products, with suitable conditions: C₆H₆, C₆H₅NO₂, CH≡CH.
Hint
Which of the three can be made into benzene, and what can benzene be made into?
Answer
Ethyne → benzene → nitrobenzene:
The first step is polymerization (cyclization); the second, nitration, an electrophilic substitution.
Check whether the compounds above are aromatic or not.
Hint
Check every condition: a p orbital on every ring atom, flat, 4n + 2 π electrons.
Answer
- i.Cyclobutadiene, C₄H₄: every carbon is sp² and the ring is flat, but it has 4 π electrons. gives . Not aromatic: with 4n π electrons in a flat ring it is antiaromatic, and very unstable.
- ii.Cycloheptatriene, C₇H₈: 6 π electrons (), but its CH₂ carbon is sp³, with no p orbital, so the electrons can’t go round the ring (and the ring isn’t flat: it is a shallow boat). Not aromatic (non-aromatic).
- iii.Cyclohexa-1,3-diene, C₆H₈: two CH₂ carbons are sp³, and it has 4 π electrons (). Not aromatic (non-aromatic).
What would be the product when:
- i.benzene is treated with chlorine in the presence of sunlight?
- ii.sodium benzoate is heated with soda-lime?
- iii.the compound obtained by passing acetylene through a red-hot iron tube at about 500 °C is heated with ethanoyl chloride in the presence of anhydrous AlCl₃?
Answer
- i.Benzene hexachloride (BHC, 1,2,3,4,5,6-hexachlorocyclohexane), by addition: .
- ii.Benzene (and sodium carbonate), by decarboxylation:
iii. Acetylene gives benzene, ; benzene with ethanoyl chloride and anhydrous AlCl₃ gives acetophenone by Friedel–Crafts acylation:
Differentiate between:
- i.aliphatic compounds and aromatic compounds;
- ii.Friedel–Crafts alkylation and acylation;
- iii.a sooty and a non-sooty flame.
Answer
i.
| Aliphatic compounds | Aromatic compounds |
|---|---|
| Open chains, or rings without delocalized π electrons (cyclohexane). | Flat rings with delocalized π electrons, obeying Hückel’s rule. |
| Mostly a lower ratio of C to H (in hexane, 6 : 14): alkanes and alkenes burn with a less sooty flame. (Ethyne, 1 : 1, is the exception: it burns very sooty.) | High ratio of C to H (in benzene, 1 : 1); burn with a sooty flame. |
| Unsaturated ones give addition reactions easily (they decolorize bromine water). | Resist addition; give electrophilic substitution. |
| Examples: ethane, ethene, hexane. | Examples: benzene, toluene, naphthalene. |
ii.
| Alkylation | Acylation |
|---|---|
| Puts an alkyl group (–R) on the ring. | Puts an acyl group (RCO–) on the ring. |
| Reagent: an alkyl halide (CH₃Cl). | Reagent: an acyl chloride (CH₃COCl) or an anhydride. |
| Product: an alkylbenzene (toluene). | Product: a ketone (acetophenone). |
| Electrophile: a carbocation, R⁺. | Electrophile: an acylium ion, RCO⁺. |
| The product is more reactive than benzene, so more alkyl groups go in. | The product is less reactive, so it stops at one group. |
iii.
| Sooty flame | Non-sooty flame |
|---|---|
| Yellow, luminous, smoky. | Blue, hardly luminous, no smoke. |
| From fuels with a high C : H ratio (benzene, aromatic compounds) or too little air. | From fuels with a low C : H ratio (methane, LPG) and enough air. |
| Unburnt carbon escapes as soot; incomplete combustion. | Complete combustion to CO₂ and H₂O. |
C. Long answer questions
- a.The bar chart above shows six compounds (1 to 6) and the number of carbon and hydrogen atoms in each, as a pair of bars.
- i.Which pair of bars can represent an aromatic hydrocarbon?
- ii.In which ways are compound 1 and compound 6 different? Write any two.
- iii.Find the product when the compound of part i is treated with chlorine in the dark.
- iv.What happens when compound 5 is heated in a red-hot copper tube?
- b.Identify X and Y in this reaction sequence:
Hint
Write each pair as a formula: 1 is C₂H₆. Which formula is C₆H₆?
Answer
- a.The compounds are 1 C₂H₆ (ethane), 2 C₃H₆ (propene), 3 C₄H₈ (butene), 4 C₅H₁₀ (pentene), 5 C₂H₂ (ethyne) and 6 C₆H₆ (benzene).
- i.Pair 6: 6 C and 6 H, benzene.
- ii.Compound 1, ethane, is a saturated, open-chain (aliphatic) hydrocarbon, its carbons sp³; compound 6, benzene, is an aromatic ring, its carbons sp², with delocalized π electrons. Ethane (C : H = 1 : 3) burns with a non-sooty flame; benzene (1 : 1) with a sooty one. Ethane reacts with chlorine only in light, by free-radical substitution; benzene by electrophilic substitution with a catalyst.
- iii.With chlorine in the dark and a halogen carrier (FeCl₃), benzene gives chlorobenzene: . (With no carrier, nothing happens in the dark.)
- iv.Compound 5, ethyne, polymerizes: three molecules join into benzene: .
- b.Zinc dust takes phenol’s oxygen: X is benzene. Hydrogen over nickel adds to benzene: Y is cyclohexane.
- a.Write the main differences between the addition reactions and the electrophilic substitution reactions of benzene.
- b.Identify A and B:
Answer
a.
| Addition | Electrophilic substitution |
|---|---|
| Atoms are added to the ring; nothing leaves. | An H of the ring is replaced; it leaves (as H⁺). |
| The aromatic ring is destroyed: the product is a cyclohexane ring. | The aromatic ring remains. |
| Needs vigorous conditions: H₂ with Ni under heat and pressure; Cl₂ in sunlight. | Goes under milder conditions, with a catalyst that makes an electrophile. |
| Free-radical (Cl₂, sunlight) or on a metal surface (H₂). | An electrophile attacks the π electrons, through an arenium ion. |
| Examples: cyclohexane, BHC. | Examples: nitrobenzene, chlorobenzene, toluene. |
b. Sodium benzoate with soda-lime loses its carboxyl group: A is benzene. Benzene with chloromethane and anhydrous AlCl₃ (Friedel–Crafts alkylation): B is toluene (methylbenzene).
An aromatic hydrocarbon A, of molecular mass 78 amu, is heated with concentrated nitric acid and concentrated sulphuric acid to give compound B. A reacts with acetic anhydride, in the presence of anhydrous AlCl₃, to give C. Identify A, B and C, with equations.
Hint
Which aromatic hydrocarbon has a molecular mass of 78?
Answer
A is benzene, C₆H₆ (6 × 12 + 6 × 1 = 78). B is nitrobenzene, by nitration. C is acetophenone, by Friedel–Crafts acylation.
A carboxylic acid A, molecular formula C₇H₆O₂, reacts with NaOH solution to give B. B is heated with soda-lime to give C. C reacts with chloromethane (with anhydrous AlCl₃) to give toluene. Identify A, B and C.
Hint
Work backwards from toluene: what does chloromethane add to?
Answer
Toluene comes from benzene and chloromethane, so C is benzene. Benzene comes from sodium benzoate and soda-lime, so B is sodium benzoate. Sodium benzoate comes from a carboxylic acid and NaOH, so A is benzoic acid, C₆H₅COOH (C₇H₆O₂ ✓).
M, N and O are organic compounds that turn into each other in a cycle: M → N → O → M. M is the aromatic compound of molecular mass 78; N is the product when M undergoes alkylation; and M is obtained from O. Identify M, N and O. What decides whether an incoming electrophile goes to the o-, p- or m- position? Explain with resonance structures.
Hint
M is the aromatic compound of mass 78. Which compound, made from toluene, gives benzene back?
Answer
M is benzene (C₆H₆, 78). Alkylated with chloromethane and anhydrous AlCl₃, it gives N, toluene. Oxidizing toluene’s CH₃ group (with alkaline KMnO₄, a reaction met in Grade 12) gives O, benzoic acid, and benzoic acid gives benzene back through sodium benzoate and soda-lime.
(The question doesn’t fix O completely: any compound that gives benzene, such as sodium benzoate or phenol, fits “M is obtained from O”; benzoic acid is the one that also closes the cycle from toluene.)
What directs the electrophile is the group already on the ring:
- A group that pushes electrons into the ring (–NH₂, –OH, –OR, –CH₃) makes the ortho and para carbons richer in electrons, so the electrophile goes there: an o, p director, and it activates the ring. In aniline the lone pair on N is delocalized into the ring, giving a negative charge on C-2, C-4 and C-6 (Figure 15.25).
- A group that pulls electrons out of the ring (–NO₂, –CHO, –COOH, –SO₃H, –CN) leaves a positive charge on the ortho and para carbons, so the electrophile goes to the meta carbons, which are least affected: an m director, and it deactivates the ring. Nitrobenzene’s resonance structures (Figure 15.26) show the positive charge on C-2, C-4 and C-6, so the meta carbons are attacked.
- The halogens are the exception: o, p directors that deactivate the ring.
A. Identify S, T, U and V from the table.
| Compound | Conditions | Type of reaction or product |
|---|---|---|
| benzene | T | combustion |
| S | red-hot iron tube | C₆H₆ |
| benzene | chlorine, sunlight | V |
| U | zinc dust | benzene |
B. Explain the resonance structures of benzene. What is the product when benzene burns in air? Explain.
Answer
A. T is air (oxygen) and ignition: benzene burns. S is ethyne (acetylene), . V is benzene hexachloride, C₆H₆Cl₆, by addition. U is phenol, C₆H₅OH, reduced by zinc dust.
B. Benzene can be drawn as two Kekulé structures, with the three double bonds in either of two sets of positions; the atoms are in the same places in both. The real molecule is their resonance hybrid: its six π electrons are delocalized round the ring, so every C–C bond is the same (139 pm), between single and double, and the molecule is about 150 kJ/mol more stable than one Kekulé structure. The two structures contribute equally and are joined by ↔.
Burning in plenty of air, benzene gives carbon dioxide and water, with a yellow, sooty flame, because its high proportion of carbon means some carbon escapes unburnt as soot:
