Skip to content

← Grade 11 Chemistry

Exam practice

Every question from the end of every unit, with hints and answers to open. After you check an answer, mark how you did, and come back to the ones you didn’t get.

24 questions

Unit 12 · Basic Concepts of Organic Chemistry

Printable PDFs

B. Short answer questions

1.

Why is it necessary to study organic compounds separately? Explain with five suitable reasons.

Hint

Think of how many there are, their bonding, their properties, isomerism and carbon itself.

Answer
  • a.Number: organic compounds number many millions, far more than the inorganic compounds, and thousands of new ones are made each year.
  • b.Catenation: carbon atoms link into long chains and rings of any size, which no other element does to the same extent.
  • c.Covalent bonding: organic compounds are covalent molecules, held to one another only by weak forces, so they have low melting and boiling points and are often volatile; they form no ions, so their solutions don’t conduct electricity.
  • d.Isomerism: many organic compounds share one molecular formula but have different structures (ethanol and methoxymethane, C₂H₆O); this is rare in inorganic compounds.
  • e.Reactions: organic reactions are molecular and generally slow, often give several products, and most organic compounds burn, giving CO₂ and H₂O.

(Also: their importance to life, as carbohydrates, proteins, fats, DNA, and to industry, as fuels, plastics, drugs, dyes.)

2.

Write the characteristics of a homologous series.

Answer
  • a.All the members have the same functional group and so similar chemical properties.
  • b.Consecutive members differ by a –CH₂– group, 14 u in molecular mass.
  • c.All the members are represented by one general formula (alkanes CₙH₂ₙ₊₂, alcohols CₙH₂ₙ₊₁OH).
  • d.They can be prepared by the same general methods.
  • e.Their physical properties (melting point, boiling point, density) change gradually as the molecular mass increases.
  • f.The first member often shows some unusual behavior.
3.

Differentiate between:

  • a.ethene and ethane
  • b.propyne and propane
Answer

a.

Ethene Ethane
C₂H₄, CH₂=CH₂ C₂H₆, CH₃–CH₃
Unsaturated: a C=C double bond (one σ and one π). Saturated: only single (σ) bonds.
An alkene, CₙH₂ₙ. An alkane, CₙH₂ₙ₊₂.
Takes part in addition reactions; decolorizes bromine water. Takes part in substitution reactions; doesn’t decolorize bromine water.
Each carbon: 3 σ + 1 π; flat, 120° angles. Each carbon: 4 σ; tetrahedral, 109.5°.

b.

Propyne Propane
C₃H₄, HC≡C–CH₃ C₃H₈, CH₃–CH₂–CH₃
Unsaturated: a C≡C triple bond (one σ and two π). Saturated: only single bonds.
An alkyne, CₙH₂ₙ₋₂. An alkane, CₙH₂ₙ₊₂.
Takes part in addition reactions; decolorizes bromine water. Takes part in substitution reactions.
4.

How were organic compounds thought to originate? Explain with the help of the vital force theory.

Answer

In the early nineteenth century, chemists such as Berzelius believed that organic compounds could be made only inside living plants and animals, under the influence of a mysterious vital force present in living organisms (Latin vita, life). This vital force theory said organic compounds could never be made in a laboratory from inorganic substances. It was given up after Wöhler made urea from ammonium cyanate (1828), Kolbe made acetic acid from its elements (1845) and Berthelot made methane (1856), all in the laboratory.

5.

How was urea obtained for the first time?

Answer

In 1828 Friedrich Wöhler heated ammonium cyanate, an inorganic salt (made, as usually written, from ammonium chloride and potassium cyanate), and obtained urea:
NHX4Cl+KCNO→NHX4CNO+KCl \ce{NH4Cl + KCNO -> NH4CNO + KCl}
NHX4CNO→heatNHX2CONHX2 \ce{NH4CNO ->[heat] NH2CONH2}
It was the first organic compound made in a laboratory from an inorganic one, and it helped to overthrow the vital force theory.

6.

Write any five differences between organic and inorganic compounds.

Answer
Organic compounds Inorganic compounds
Always contain carbon, usually with hydrogen. May contain any elements.
Covalent bonds. Ionic, covalent and coordinate bonds.
Low melting and boiling points; often volatile. High melting and boiling points; generally non-volatile.
Mostly insoluble in water, soluble in organic solvents. Many dissolve in water.
Solutions don’t conduct electricity. Solutions and melts usually conduct.
Burn, giving CO₂ and H₂O. Usually don’t burn.
Show isomerism commonly. Rarely show isomerism.
Slow, molecular reactions. Fast, often ionic reactions.
7.

The four compounds above share a characteristic of carbon. Which characteristic do they show? Explain the bonding of carbon in each.

Answer

They show the tetracovalency of carbon: in every one, each carbon atom forms four covalent bonds in all.

  • a.Methane, CH₄: the carbon forms four single C–H bonds, four σ bonds.
  • b.Ethane, C₂H₆: each carbon forms three C–H bonds and one C–C bond, four σ bonds (and the C–C bond shows catenation).
  • c.Ethene, C₂H₄: each carbon forms two C–H bonds and a C=C double bond, three σ bonds and one π bond.
  • d.Ethyne, C₂H₂: each carbon forms one C–H bond and a C≡C triple bond, two σ bonds and two π bonds.
8.

How do we classify organic compounds? Explain the classification with the help of a chart.

Answer

By the nature of their carbon chain.

  • Open chain (aliphatic) compounds: the chain has free ends, straight or branched. Saturated: alkanes (propane); unsaturated: alkenes (propene) and alkynes (ethyne).
  • Closed chain (cyclic) compounds: the atoms form a ring.
    • Homocyclic (carbocyclic): the ring is of carbon atoms only. Alicyclic: behave like aliphatic compounds (cyclohexane). Aromatic: contain a benzene ring (benzene, naphthalene).
    • Heterocyclic: the ring contains a heteroatom, N, O or S (pyridine, furan, thiophene).

The chart is Figure 12.30.

9.

The structures of two compounds are given above. Are these compounds different? If so, in what respects? Give four differences.

Hint

In a bond-line drawing every corner is a carbon. How many hydrogens does each corner carry in A, and in B?

Answer

Yes. A is cyclohexane, C₆H₁₂; B is benzene, C₆H₆.

Cyclohexane (A) Benzene (B)
C₆H₁₂: each carbon carries two H. C₆H₆: each carbon carries one H.
Saturated: only single bonds. Unsaturated: three C=C in its Kekulé structure, six π electrons shared round the ring.
Alicyclic: behaves like an alkane, undergoes substitution only slowly. Aromatic: unusually stable, undergoes electrophilic substitution.
Puckered (non-planar) ring, bond angles about 109.5°. Flat ring, bond angles 120°, all C–C bonds equal (139 pm).
Burns with a much less smoky flame. Burns with a sooty, smoky flame.
10.

Write the first five members of the alcohol series. Find the difference in mass between two consecutive members.

Answer
Alcohol Formula Molecular mass (u)
methanol CH₃OH 32
ethanol C₂H₅OH 46
propan-1-ol C₃H₇OH 60
butan-1-ol C₄H₉OH 74
pentan-1-ol C₅H₁₁OH 88

Each differs from the next by –CH₂–, a mass difference of 12 + 2 = 14 u (for example 46 − 32 = 14).

11.

Why does HCOOH behave differently from the other members of the carboxylic acid series? Write any three characteristics of a homologous series.

Answer

HCOOH, methanoic (formic) acid, is the first member. It has no alkyl group: its –COOH carbon carries a hydrogen, H–C(=O)–OH, so the molecule also contains an aldehyde-like H–C=O group. It therefore acts as a reducing agent (it reduces Tollens’ reagent and Fehling’s solution, which other acids don’t), it is a stronger acid than ethanoic acid, and heating with concentrated sulphuric acid breaks it into carbon monoxide and water rather than giving an anhydride.

Three characteristics of a homologous series: the members have the same functional group and similar chemical properties; consecutive members differ by –CH₂– (14 u); all are represented by one general formula (CₙH₂ₙ₊₁COOH for these acids).

12.

Write the structural formulas of C₆H₆, C₆H₁₂ and C₃H₇OH. How is a structural formula different from a contracted formula?

Answer

C₆H₆ is benzene and C₆H₁₂ cyclohexane (the ring compounds of this unit; C₆H₁₂ could also be hex-1-ene), drawn in Figure 12.39; C₃H₇OH is propan-1-ol, CH₃CH₂CH₂OH, drawn in Figure 12.58.

A structural formula shows every atom and every bond as a line. A contracted formula groups each carbon with its hydrogens (CH₃, CH₂) and writes them in a row without the bonds between them (CH₃CH₂CH₂OH). The structural formula shows exactly how the atoms are joined; the contracted one is shorter and easier to use in equations.

13.

Which process is shown by the reaction above? How is it different from cracking?

Answer

Reforming (aromatization, platforming): heptane is converted into methylcyclohexane and then toluene, over platinum at about 773 K, giving off hydrogen.

Reforming Cracking
Straight-chain alkanes become rings and aromatic compounds. Large molecules break into smaller ones.
The number of carbon atoms stays the same (C₇ → C₇). The carbon chain is broken into shorter chains.
Gives off hydrogen. Gives an alkane and an alkene.
Catalyst: platinum. Heat alone, or a silica–alumina (zeolite) catalyst.
14.

Explain octane number and cetane number with examples. How is the knocking property different from the anti-knock property?

Answer

Octane number: the percentage by volume of iso-octane (2,2,4-trimethylpentane, 100) in a mixture with heptane (0) that has the same anti-knock property as the petrol. Petrol of octane number 90 knocks like 90% iso-octane and 10% heptane.
Cetane number: the percentage by volume of cetane (hexadecane, 100) in a mixture with 1-methylnaphthalene (0) that has the same ignition quality as the diesel. Diesel of cetane number 50 ignites like 50% cetane and 50% 1-methylnaphthalene.
The knocking property of a fuel is its tendency to explode early and irregularly in the cylinder under compression, giving a metallic knock (heptane knocks badly). The anti-knock property is its ability to resist this and burn smoothly when sparked (iso-octane has a high anti-knock property). A good petrol has a low knocking tendency and a high anti-knock property.

15.

How is the octane number of a fuel increased? A mixture of heptane and iso-octane contains 40% heptane. What is its octane number? Write any two differences between cracking and reforming.

Answer

The octane number is raised by increasing the share of branched, cyclic, unsaturated and aromatic hydrocarbons in the petrol, by catalytic cracking and reforming, and by adding anti-knock agents (once tetraethyl lead; now ethanol or MTBE).
The mixture has 100 − 40 = 60% iso-octane, so its octane number is 60.
Cracking breaks large molecules into smaller ones (alkane + alkene), while reforming keeps the number of carbons and turns chains into rings and aromatics; cracking uses heat or a silica–alumina catalyst, reforming a platinum catalyst and gives off hydrogen.

16.

What is the vital force theory? How was it discarded? Explain.

Answer

The vital force theory, held by Berzelius in the early 1800s, said that organic compounds could be formed only in living organisms, by a mysterious vital force, and could never be made in the laboratory.
It was discarded when organic compounds were made in the laboratory from inorganic substances: Wöhler obtained urea by heating ammonium cyanate in 1828 (NHX4CNO→NHX2CONHX2 \ce{NH4CNO -> NH2CONH2} ), Kolbe made acetic acid from its elements in 1845, and Berthelot made methane in 1856. No vital force was needed, so the theory was dropped, and organic chemistry was redefined as the chemistry of hydrocarbons and their derivatives.

C. Long answer questions

1.
  • a.Explain the tetracovalency of carbon with an example.
  • b.How is the knocking property of a fuel different from its anti-knock property?
  • c.In the organic compound above, which part is the active site?
Answer
  • a.Carbon (1s² 2s² 2p²) has four valence electrons. On promoting one 2s electron to 2p it has four unpaired electrons (1s² 2s¹ 2p³), and it shares each with another atom, forming four covalent bonds and completing its octet. This is tetracovalency. Example: in methane, CH₄, the carbon forms four C–H bonds, pointing to the corners of a tetrahedron (109.5°). In ethene each carbon has 3 σ + 1 π bonds, in ethyne 2 σ + 2 π: four bonds every time.
  • b.Knocking is a fuel’s tendency to explode early and irregularly when the fuel–air mixture is compressed, making a metallic knock and wasting power; the anti-knock property is its ability to resist this and burn smoothly only when the spark lights it. Heptane has a strong knocking tendency (octane number 0); iso-octane has a high anti-knock property (100).
  • c.The compound is methanol, HO–CH₃. Its active site is the –OH (hydroxyl) group, its functional group; CH₃– is the molecular body.
2.

Here are three members of a homologous series: HCOOH, X, CH₃CH₂COOH.

  • a.Write the contracted formula of X.
  • b.Which of them has the highest melting point and boiling point? Give a reason.
  • c.What are the molecular mass and IUPAC name of X?
  • d.What is the IUPAC name of the fourth member of the series?
Hint

Consecutive members differ by –CH₂–. For b, look up the real melting points: they don’t all follow the same order.

Answer
  • a.X is the member between HCOOH and CH₃CH₂COOH: CH₃COOH.
  • b.The boiling point is highest for propanoic acid, CH₃CH₂COOH (141 °C, against 118 °C for ethanoic and 101 °C for methanoic acid): it has the largest molecules, so the strongest forces between them (they all form hydrogen bonds). The melting points are irregular: ethanoic acid melts highest (17 °C; methanoic 8 °C, propanoic −21 °C), because its small, symmetrical molecules pack best into a crystal. So boiling points follow the rule of a homologous series; melting points do not always.
  • c.CH₃COOH: 2 × 12 + 4 × 1 + 2 × 16 = 60 u; IUPAC name ethanoic acid (acetic acid).
  • d.The fourth member is CH₃CH₂CH₂COOH, butanoic acid.
3.

A motorbike rider hears a louder, explosive sound from his engine these days. What could be the reason? What would you suggest to reduce it? Is something wrong with his engine? How does tetraethyl lead reduce the explosive sound?

Answer

Reason: most likely knocking: the petrol has a low octane number (poor or adulterated fuel), so under compression the fuel–air mixture explodes by itself before the spark’s flame reaches it. Carbon deposits in the cylinder, an overheated engine or wrongly set spark timing make it worse.

Suggestions: fill up with good-quality petrol of the octane number the maker recommends, from a reliable pump; get the engine serviced (clean the carbon deposits, check the spark plug and timing); don’t labor the engine in a high gear up hills.

Engine: the engine is probably sound; the knock comes from the fuel. But knocking that goes on can damage the pistons, so it should be fixed.

Tetraethyl lead: TEL, (C₂H₅)₄Pb, breaks up in the cylinder into lead and ethyl radicals, (CX2HX5)X4Pb→Pb+4 CX2HX5X ∙  \ce{(C2H5)4Pb -> Pb + 4C2H5^.} . The lead (as lead oxide particles) checks the radical reactions that make the unburnt mixture explode early, so the fuel burns smoothly and the knock stops; 1,2-dibromoethane was added to carry the lead out as volatile PbBr₂. It is no longer used: leaded petrol is banned because lead is poisonous.

4.

Write the compounds according to the table.

Number of carbon atoms Compound with –OH Compound with –NH₂
2 … …
3 … …
4 … …
5 … …
Answer
Carbon atoms With –OH (alcohols) With –NH₂ (amines)
2 ethanol, CH₃CH₂OH ethanamine, CH₃CH₂NH₂
3 propan-1-ol, CH₃CH₂CH₂OH propan-1-amine, CH₃CH₂CH₂NH₂
4 butan-1-ol, CH₃(CH₂)₃OH butan-1-amine, CH₃(CH₂)₃NH₂
5 pentan-1-ol, CH₃(CH₂)₄OH pentan-1-amine, CH₃(CH₂)₄NH₂

(From 3 carbons on, isomers with the group on another carbon, such as propan-2-ol, are correct too.)

5.

Are octane numbers and cetane numbers comparable? Write three similarities and three differences.

Answer

They are comparable in method, not in meaning.
Similarities:

  • a.Both are arbitrary scales from 0 to 100.
  • b.Both are fixed by two pure reference compounds.
  • c.Both give the percentage by volume of the better reference compound in a mixture that behaves like the fuel being tested, in a standard test engine.

Differences:

Octane number Cetane number
Rates petrol (spark-ignition engines). Rates diesel (compression-ignition engines).
Measures resistance to knocking (self-ignition). Measures ease of self-ignition.
References: iso-octane 100, heptane 0. References: cetane 100, 1-methylnaphthalene 0.
Branched and aromatic hydrocarbons score high. Long straight chains score high.
6.

Here are three members of a homologous series: HCHO, X, CH₃CH₂CHO.

  • a.Write the contracted formula of X.
  • b.Which of them has the highest melting point and boiling point? Give a reason.
  • c.Why does HCHO behave differently from the second and third members?
  • d.What are the molecular mass and IUPAC name of X?
Answer
  • a.CH₃CHO.
  • b.Propanal, CH₃CH₂CHO: boiling point 48 °C (ethanal 20 °C, methanal −19 °C) and melting point −81 °C (ethanal −123 °C, methanal −92 °C). It has the largest molecular mass, so the strongest forces between its molecules.
  • c.HCHO (methanal) is the first member: it has no alkyl group, a hydrogen on both sides of its C=O. It is a gas at room temperature, more reactive than the others, and gives some reactions the others don’t (with ammonia it forms hexamine, (CH₂)₆N₄, and with concentrated alkali it undergoes the Cannizzaro reaction, which aldehydes with an H on the carbon next to C=O don’t).
  • d.CH₃CHO: 2 × 12 + 4 × 1 + 16 = 44 u; IUPAC name ethanal (acetaldehyde).
7.

Make a chart of the classification of organic compounds and give an example of each class.

Answer
  • Organic compounds
    • Open chain (aliphatic)
      • Alkanes (saturated): propane, CH₃CH₂CH₃
      • Alkenes (C=C): propene, CH₂=CHCH₃
      • Alkynes (C≡C): ethyne, HC≡CH
    • Closed chain (cyclic)
      • Homocyclic (carbocyclic)
        • Alicyclic: cyclohexane, C₆H₁₂
        • Aromatic: benzene, C₆H₆
      • Heterocyclic: pyridine, C₅H₅N; furan, C₄H₄O

The same tree is drawn in Figure 12.30.

8.

Write the functional groups in urea, chlorophyll (Figure 12.62) and hemoglobin (its heme, Figure 12.63).

Answer
  • a.Urea, H₂N–CO–NH₂: a carbonyl group (C=O) joined to two amino groups (–NH₂); together these make it an amide (it is the diamide of carbonic acid, “carbamide”).
  • b.Chlorophyll: ester groups (–COOR: one with methanol, one with phytol, a long alcohol), a ketone (C=O in a ring), an aldehyde (–CHO) in chlorophyll b (a methyl group in its place in chlorophyll a), alkene C=C double bonds, and four ring nitrogen atoms (C=N, pyrrole-type heterocycles) holding the Mg²⁺ ion. (Some drawings show the acid before it is esterified, with a –COOH group, and no magnesium: that is pheophorbide.)
  • c.Heme (the iron-containing part of hemoglobin): two carboxylic acid (–COOH) groups, two vinyl (alkene, –CH=CH₂) groups, methyl groups, and four ring nitrogen atoms (pyrrole-type heterocycles, C=N) holding the Fe²⁺ ion.