Taps and water · 31 of 58
Stop a dripping tap with a new washer
Expert guidance
What you need
An adjustable wrench, a screwdriver, a rag and a new washer.
Do this
- Turn off the water to that tap, and open the tap to let it drain. Don’t know the valve? Find it first.
- Put the plug in the sink, so nothing small falls down.
- Undo the small screw and pull off the handle.
- Undo the nut below with the wrench, padded with the rag, and turn out the spindle.
- Unscrew the washer from its end. Take it to a hardware shop and buy an exact match.
- Put it all back, not too tight, then turn on the water and check.
Why this way
A worn washer is the first thing to try. This is for old screw-down taps, and an adult should watch the first time. Still drips, or no washer inside? Other parts may be worn, so call a plumber. Expert guidance.
Do it today
Check every tap at home for drips. Note which ones need a washer. Five minutes.
Where these facts come from
- Fixing a Leaky Tap the Easy Way, iFixit.
- What Every Renter Should Know About Plumbing Repairs, iFixit.
- Fix a Leak Week, US EPA WaterSense.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
