Skip to content

← Fix It, in Practice

Bicycles · 30 of 58

Take up slack in a brake with the barrel adjuster

Expert guidance

Do this

  1. Find the small threaded barrel where the cable enters the lever. Loosen its ring if it has one.
  2. Lever pulls too far, brake weak? Turn the barrel out a turn or two.
  3. Pads rub the rim, or grab at once? Turn it in.
  4. Squeeze the lever hard, then spin the wheel. It must spin freely.
  5. Set both brakes to feel about the same, and tighten the ring.
  6. Test at walking speed.
  7. Lever still reaches the bar? Don’t ride. Take it to a mechanic.

Why this way

As pads wear, the lever travels further before anything happens. The barrel takes up that slack without tools. Expert guidance.

Do it today

Squeeze each lever. If it comes close to the bar, turn the barrel out. Five minutes.

For example

Riding to school in Dharan, Prakriti found her back lever touching the bar. Two turns of the barrel brought the bite back, and she checked it in the yard before setting off.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix