Taps and water · 32 of 58
Clean the mesh in a weak tap
Expert guidance
What you need
A wrench and rag, a cup of white vinegar, and an old toothbrush.
Do this
- Turn off the water to the tap, and let the last of it run out.
- Put the plug in the sink, so small parts can’t fall down it.
- Unscrew the tip of the tap (the aerator). Wrap it in the rag first if you use a wrench, so it doesn’t scratch.
- Note the order of the small parts as they come out.
- Soak them in white vinegar overnight, and brush off what’s left.
- Dry them, screw them back, and turn the water on slowly.
Why this way
A clogged aerator makes the flow weak even when the supply is fine, and it’s a job you can do with a cup of vinegar. Expert guidance.
Do it today
Open each tap fully. Does one spray sideways or run weakly? Plan to clean it tonight. Five minutes, then overnight.
Where these facts come from
- How to Clean a Kitchen Aerator, iFixit.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
