Bicycles · 25 of 58
Take a bicycle wheel off and put it back
Expert guidance
What you need
A wrench for the axle nuts, usually 15 mm, unless it has a quick-release lever.
Do this
- Lay the bike on its left side. Don’t stand it up without the back wheel: that can damage the gears.
- Back wheel with gears: shift to the smallest back gear to slacken the chain.
- Release the brake. On V-brakes, squeeze the arms together and unhook the cable.
- Loosen both nuts, or open the lever. Lift the wheel out, pulling the gear arm back.
- Putting it back: seat the axle fully in the frame, center the wheel, tighten both nuts firmly, and reconnect the brake.
- Squeeze the brake and spin the wheel before you ride.
What can go wrong
A wheel not fully secured can come out while you’re riding. Hydraulic disc brakes: don’t squeeze the lever with the wheel out. Expert guidance.
Do it today
Take the front wheel off and put it back, with someone who knows how watching. Fifteen minutes.
Where these facts come from
- Wheel Removal and Installation, Park Tool.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
