Skip to content

← Fix It, in Practice

Bicycles · 26 of 58

Find the hole in a punctured tube

Expert guidance

What you need

Two tire levers, a pump, a pen, and a bowl of water.

Do this

  1. Take the wheel off and let out all the air.
  2. Push the tire’s edge in from the rim. Hook one lever under it, a second 2 to 5 cm away, and lift. No screwdrivers or knives: they cut the tube.
  3. Run a lever round, and pull the tube out. Note how it lay.
  4. Pump it to about twice its width. Listen and feel with your lips for air. Still nothing? Put it under water and watch for bubbles.
  5. Mark the hole with four lines round it, not too close.
  6. Feel carefully inside the tire for a thorn, wire or glass. Remove it. Check the rim strip too.

Why this way

What caused the flat is usually still in the tire. Two slits side by side mean the tire was too soft and pinched, not a thorn. Expert guidance.

Do it today

Take out a tube, or watch someone do it at a shop. Thirty minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix