Skip to content

← Fix It, in Practice

Tools · 5 of 58

Get out a screw with a ruined head

Expert guidance

What you need

Screwdrivers of a few sizes, and a wide rubber band or a thin piece of cloth.

Do this

  1. Stop turning the moment the tip slips. Each slip makes it worse.
  2. Try a slightly smaller or larger screwdriver, then a flat one. Turn only if it catches at once.
  3. Still no grip? Stretch a rubber band over the screw head. A thin piece of cloth also works.
  4. Press the screwdriver into the band, hard, and turn slowly.
  5. If that fails, ask at a hardware shop. The next ways use special pliers or a power tool.

Why this way

The rubber fills the worn gaps, so the tip has something to grip. Forcing a tip that doesn’t catch only strips the head further. Expert guidance.

Do it today

Next time a screw won’t turn, reach for a rubber band first. Put two in your repair kit now. One minute.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix