Skip to content

← Fix It, in Practice

Tools · 4 of 58

Match the screwdriver to the screw

Official advice

Do this

  1. Flat screw: use a tip as wide as the slot.
  2. Cross screw: match the type and size. Two cross types look alike, and a Phillips tip can slip out of a Pozidriv screw.
  3. Clean any grease off the handle.
  4. Lay small work on a table. Don’t hold it in one hand and drive with the other.
  5. Push only as hard as you need to keep the tip in the screw.
  6. Never test for electricity with a screwdriver.

Why this way

A worn or wrong tip slips out of the screw. That’s how hands get cut and screw heads get ruined. Official advice.

Do it today

Find five screws on furniture or toys (nothing electric). Try your screwdrivers in each until one sits snugly. Don’t undo them. Five minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix