Skip to content

← Fix It, in Practice

Tools · 6 of 58

Pick the glue that suits what you’re mending

Expert guidance

Do this

  1. Wood, paper, cloth: white PVA glue (Fevicol is a white resin glue). It needs a close fit and clamping, and won’t hold metal, plastic or glass.
  2. Shoes, rubber, leather: rubber-based contact glue (Fevibond is one). Coat both sides, let it set briefly, then join. Open a window.
  3. Small hard parts that fit tightly: superglue or instant glue (Fevikwik is one). It’s fast but brittle, so not for bendy things or joints under load.
  4. Metal, glass, ceramic, mixed materials, gaps: two-part epoxy. Mix it as the pack says.
  5. Clean, dry surfaces always, and read the pack’s times.

What glue won’t hold

Thin bendy plastics such as polythene and polypropylene (many buckets and tubs) hardly bond at all without a primer. Don’t count on a glued bucket, and don’t mend things that touch food unless the pack says you may.

Do it today

Read the back of every glue at home. Write on each what it’s for. Ten minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix