Plugs, fuses and lights · 42 of 58
Change a broken plug on a lead, with an adult
Expert guidance
What you need
A new plug with the same pins (Nepal uses round pins), and a small screwdriver. Do this with an adult who has done it before.
Do this
- Unplug it from the wall. This is the plug on a lead, never a wall socket.
- Open the old plug. Note which wire goes where, and take a photo.
- Undo the cable grip and the three screws, and take it off.
- In the new plug, match the marks: brown to L, blue to N, green and yellow to E. Older leads: red, black, green.
- Twist each wire’s strands, so none stray. Tighten each screw. No bare copper should show.
- Clamp the grip on the outer cover, not the wires. Tug it, then close the plug.
Stop if
It isn’t these three wires, the lead is damaged, or the plug has no marks. Take it to an electrician. Don’t twist wires together, or push them into a socket.
Do it today
Find which of the leads at home have a cracked plug. Ask an adult to change one with you. Twenty minutes.
Where these facts come from
- Plugs and fuses, Electrical Safety First.
- Wiring a plug, Homebuilding and Renovating.
- Plug and voltage in Nepal, World Standards.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
