Plugs, fuses and lights · 43 of 58
Change a bulb with the power off
Expert guidance
What you need
A new bulb with the same fitting, and a sturdy stepladder if it’s high.
Do this
- Turn off the power, at the board’s switch if you can, not just the wall switch.
- Let it cool. Bulbs get very hot.
- Use a sturdy stepladder, with someone holding it. No stool on a table.
- Screw fitting: twist it counterclockwise. Bayonet (two small pins): push up gently, then twist counterclockwise.
- Take the old one to the shop to match it.
- Fit the new one, screw it in gently, and turn the power on.
Why this way
Never change a bulb with the power on. Bulb broken or stuck in the socket? Leave it for an electrician. A broken twisty bulb needs special care. Expert guidance.
Do it today
Check which fitting your room’s bulb has, and buy a spare. Five minutes.
Where these facts come from
- How to change a standard lightbulb, Home Group.
- How to change a light bulb, HomeServe.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
