Plugs, fuses and lights · 41 of 58
Check your plugs and leads
Official advice
Do this
- Unplug first. Check only with the plug out of the socket.
- Gently pull the lead at each end. It should be firmly held.
- Look along it for cuts, nicks or crushed places.
- No joins or insulating tape. A taped lead should be replaced.
- Look at the plug: no cracks, no melted plastic, no brown marks, no colored wires showing.
- Anything wrong? Stop using it. Get the lead or plug replaced.
Why this way
Damage builds up with use. A damaged lead can shock you or start a fire. Watch for buzzing, crackling, or plugs hot to touch too: that’s a warning. Official advice.
Do it today
Check five leads at home: the iron, a fan, the phone charger, an extension board and the kettle. Ten minutes.
Where these facts come from
- Plugs and fuses, Electrical Safety First.
- Electrical safety advice for DIY-ers, Electrical Safety First.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
