Skip to content

← Fix It, in Practice

Tools · 3 of 58

Hold the work still and cut away from yourself

Official advice

Do this

  1. Lay the work on a table or clamp it. Never hold it in your palm while you cut or drive a screw.
  2. Cut away from yourself, with your other hand out of the blade’s path.
  3. Use each tool for its own job. A screwdriver isn’t a chisel, a lever or a punch, and a wrench isn’t a hammer.
  4. Look at the tool first. Split handle, bent shaft, worn tip? Don’t use it.
  5. Don’t force it. If it won’t move, stop and look again.
  6. Wear safety glasses if bits may fly. Never carry a sharp tool in your pocket.

What can go wrong

A tool slips and goes where your hand is. These are workplace rules, and they fit a kitchen table just as well. Official advice.

Do it today

Look over the tools at home. Put any with a split handle or a bent shaft aside. Five minutes.

Where these facts come from

General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.

← All 58 things to fix