Bicycles · 29 of 58
Check your brake pads and where they hit
Expert guidance
Do this
- Squeeze the lever and look. Each pad should meet the rim’s flat side, all along its length.
- It must never touch the tire. It would damage the tire.
- Look at the pad. Thin or rock-hard? It won’t stop you well, so replace it.
- Pad too high or low? Hold it, loosen its nut, move it, and tighten the nut firmly. Do one side at a time. This is for V-brakes, the tall arms on most mountain-style bicycles.
- New pads? Take your old ones to the shop to match them.
- Test at walking speed before you ride.
Why this way
Pads lose material with use and harden with age, and either way you stop less well. On a hill road, that matters. If you’re unsure of a brake, ask a bicycle mechanic. Other brake types need their own settings. Expert guidance.
Do it today
Look at all four pads with a torch. Three minutes.
Where these facts come from
- Brake Pad Replacement: Rim Brakes, Park Tool.
- Linear Pull Brake Service, Park Tool.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
