Taps and water · 37 of 58
Clear a blocked toilet without flooding the floor
Expert guidance
What you need
A toilet plunger, rubber gloves, and a jug.
Do this
- Don’t flush again. It will overflow. If it’s rising, turn off the toilet’s water valve.
- Add water with the jug until the plunger’s cup is fully covered.
- Fit the plunger into the drain, and twist it to seal.
- Push down slowly first, or you’ll be splashed.
- Then pump firmly up and down several times, keeping the seal.
- Lift it out and repeat until the water drains. Then wash the plunger and your hands with soap.
Why this way
The water going back and forth loosens the block. Caustic cleaners can burn you and damage pipes. Our guide is for a sitting toilet, so for a squat pan, or a block that won’t clear, call a plumber. Expert guidance.
Do it today
Find out if your home has a plunger, and find the toilet’s water valve. Two minutes.
Where these facts come from
- How to Unclog a Toilet, iFixit.
- Toilet Troubleshooting, iFixit.
- What Every Renter Should Know About Plumbing Repairs, iFixit.
General information. Switch off the power before touching anything electric, and leave wiring and gas to a trained person. You use it at your own risk: see our terms. Spotted a mistake, or know something better? Tell us.
